Simulation of Distributed Contact in String Instruments: a Modal Expansion Approach

Impactive contact between a vibrating string and a barrier is a strongly nonlinear phenomenon that presents several challenges in the design of numerical models for simulation and sound synthesis of musical string instruments. These are addressed here by applying Hamiltonian methods to incorporate distributed contact forces into a modal framework for discrete-time simulation of the dynamics of a stiff, damped string. The resulting algorithms have spectral accuracy, are unconditionally stable, and require solving a multivariate nonlinear equation that is guaranteed to have a unique solution. Exemplifying results are presented and discussed in terms of accuracy, convergence, and spurious high-frequency oscillations.

Epistemic Modality in Linguistic and Literature Essays in English : A comparative corpus-based study of modal verbs in student claims

This study is a corpus-based comparison between student essays written in the subject areas of English linguistics and literature at undergraduate level. They are 200 Bachelor degree theses submitted at a variety of university departments (such as English, Language and Literature, Humanities, Social and Intercultural Studies) in Sweden. The comparison concerns frequencies of core modal verbs and how often they occur together with the I, we and it subject pronouns and in the structures this/the [essay, study, project, thesis] when students attempt to communicate their personal claims. Quantitative and qualitative analyses of the essays show few similarities in the ways that core modal verbs appear in both disciplines. The results indicate mainly distinct differences, especially in relation to clusters and variation of performative verbs. Specific patterns in the ways that students use core modal verbs as hedges have also been identified.

Numerical analysis of the modal coupling at low resonances in a Colombian Andean Bandola in C using the finite element method

The work presented in this thesis is concerned with the dynamical behavior of a CBandola's acoustical box at low resonances -- Two models consisting of two and three coupled oscillators are proposed in order to analyse the response at the first two and three resonances, respectively -- These models describe the first resonances in a bandola as a combination of the lowest modes of vibration of enclosed air, top and back plates -- Physically, the coupling between these elements is caused by the fluid-structure interaction that gives rise to coupled modes of vibration for the assembled resonance box -- In this sense, the coupling in the models is expressed in terms of the ratio of effective areas and masses of the elements which is an useful parameter to control the coupling -- Numerical models are developed for the analysis of modal coupling which is performed using the Finite Element Method -- First, it is analysed the modal behavior of separate elements: enclosed air, top plate and back plate -- This step is important to identify participating modes in the coupling -- Then, a numerical model of the resonance box is used to compute the coupled modes -- The computation of normal modes of vibration was executed in the frequency range of 0-800Hz -- Although the introduced models of coupled oscillators only predict maximum the first three resonances, they also allow to study qualitatively the coupling between the rest of the computed modes in the range -- Considering that dynamic response of a structure can be described in terms of the modal parameters, this work represents, in a good approach, the basic behavior of a CBandola, although experimental measurements are suggested as further work to verify the obtained results and get more information about some characteristics of the coupled modes, for instance, the phase of vibration of the air mode and the radiation e ciency

Análise de casualidade de Granger, função impulso resposta e decomposição da variância do preço do suíno vivo nos mercados gaúchos e catarinense no período de 2008 a 2014

Atualmente a carne suína é a mais consumida no mundo, sendo o Brasil o quarto maior produtor. Este trabalho teve como objetivo estudar a relação do preço pago ao produtor de suíno por meio da análise dos preços do suíno vivo pagos aos produtores no Rio Grande do Sul e Santa Catarina, procurou-se comparar as diferenças e o comportamento entre as matrizes de produção destes dois Estados, para explicar o comportamento dos preços pagos aos produtores. Através dos resultados obtidos, constatou-se que os preços médios pagos aos produtores gaúchos foram historicamente maiores que os preços pagos aos produtores catarinenses. Por meio do Teste de Causalidade de Granger, Função Impulso Resposta e Decomposição da Variância, pode-se concluir que os preços pagos aos produtores de suíno integrados em Santa Catarina no passado, influenciam na formação dos preços pagos aos produtores independentes de suíno no Rio Grande do Sul no presente, ao mesmo tempo que os preços pagos aos produtores independentes gaúchos no passado influenciam na formação dos preços pagos aos produtores em Santa Catarina.

Modal Control of Vibration in Rotating Machines and Other Generally Damped Systems

Second order matrix equations arise in the description of real dynamical systems. Traditional modal control approaches utilise the eigenvectors of the undamped system to diagonalise the system matrices. A regrettable consequence of this approach is the discarding of residual o-diagonal terms in the modal damping matrix. This has particular importance for systems containing skew-symmetry in the damping matrix which is entirely discarded in the modal damping matrix. In this paper a method to utilise modal control using the decoupled second order matrix equations involving nonclassical damping is proposed. An example of modal control sucessfully applied to a rotating system is presented in which the system damping matrix contains skew-symmetric components.

Modal Control of Vibration in Rotating Machines and Other Generally Damped Systems

Second order matrix equations arise in the description of real dynamical systems. Traditional modal control approaches utilise the eigenvectors of the undamped system to diagonalise the system matrices. A regrettable consequence of this approach is the discarding of residual off-diagonal terms in the modal damping matrix. This has particular importance for systems containing skew-symmetry in the damping matrix which is entirely discarded in the modal damping matrix. In this paper a method to utilise modal control using the decoupled second order matrix equations involving non-classical damping is proposed. An example of modal control successfully applied to a rotating system is presented in which the system damping matrix contains skew-symmetric components.

Introducción al análisis modal operacional

Es frecuente que las estructuras, una vez realizadas, muestren diferencias, respecto de su concepción original que, en ocasiones, pueden hacer necesaria una intervención posterior con el objetivo de corregir su comportamiento estructural. En otras ocasiones estas actuaciones se hacen necesarias como consecuencias de deterioros sufridos durante la vida útil de la estructura (daño estructural) o como consecuencia de cambios en el propio uso de la estructura. En cualquier caso, tanto en las situaciones descritas, como en muchas otras, la estructura ha de someterse a un proceso de monitorización que nos permita obtener información experimental de ciertos parámetros estructurales con los que afinar los modelos numéricos que de ellas se realizan. Esta jornada se ha estructurado en cuatro conferencias en las que investigadores de las universidades de Sevilla y Córdoba nos darán una visión divulgativa del problema, nos acercarán a alguna de sus técnicas y nos mostrarán algún caso práctico de gran interés. En la segunda conferencia, el profesor de la Universidad de Córdoba Dr. D. Rafael Castro Triguero, Ingeniero de Caminos, Canales y Puertos y con una amplia experiencia en monitorización de estructuras, mostrará las bases de alguna de estas técnicas y cómo, de la información obtenida, pueden inferirse parámetros estructurales para mejorar los modelos y/o detectar daños estructurales.

Identificación de daño en estructuras históricas mediante análisis modal operacional (OMA)

Es frecuente que las estructuras, una vez realizadas, muestren diferencias, respecto de su concepción original que, en ocasiones, pueden hacer necesaria una intervención posterior con el objetivo de corregir su comportamiento estructural. En otras ocasiones estas actuaciones se hacen necesarias como consecuencias de deterioros sufridos durante la vida útil de la estructura (daño estructural) o como consecuencia de cambios en el propio uso de la estructura. En cualquier caso, tanto en las situaciones descritas, como en muchas otras, la estructura ha de someterse a un proceso de monitorización que nos permita obtener información experimental de ciertos parámetros estructurales con los que afinar los modelos numéricos que de ellas se realizan. Esta jornada se ha estructurado en cuatro conferencias en las que investigadores de las universidades de Sevilla y Córdoba nos darán una visión divulgativa del problema, nos acercarán a alguna de sus técnicas y nos mostrarán algún caso práctico de gran interés. En la tercera conferencia, el profesor de la Universidad de Sevilla Dr. D. Víctor Jesús Compán Cardiel, Arquitecto, mostró cómo la técnica de monitorización conocida pos sus siglas en inglés OMA puede ser aplicada a estructuras antiguas, que forman parte del patrimonio, para aprender de estas estructuras y, llegado el caso, detectar daño en las mismas y poder tomar las medidas necesarias para mejorar su capacidad portante y, con ello, incrementar el tiempo por el que podremos disfrutar de estos singulares edificios.

Multi-modal ultrasound imaging for breast cancer detection

This work describes preliminary results of a two-modality imaging system aimed at the early detection of breast cancer. The first technique is based on compounding conventional echographic images taken at regular angular intervals around the imaged breast. The other modality obtains tomographic images of propagation velocity using the same circular geometry. For this study, a low-cost prototype has been built. It is based on a pair of opposed 128-element, 3.2 MHz array transducers that are mechanically moved around tissue mimicking phantoms. Compounded images around 360 degrees provide improved resolution, clutter reduction, artifact suppression and reinforce the visualization of internal structures. However, refraction at the skin interface must be corrected for an accurate image compounding process. This is achieved by estimation of the interface geometry followed by computing the internal ray paths. On the other hand, sound velocity tomographic images from time of flight projections have been also obtained. Two reconstruction methods, Filtered Back Projection (FBP) and 2D Ordered Subset Expectation Maximization (2D OSEM), were used as a first attempt towards tomographic reconstruction. These methods yield useable images in short computational times that can be considered as initial estimates in subsequent more complex methods of ultrasound image reconstruction. These images may be effective to differentiate malignant and benign masses and are very promising for breast cancer screening. (C) 2015 The Authors. Published by Elsevier B.V.

Síntese, caracterização e cinética da decomposição térmica dos materiais cerâmicos PrMO3 (M = Ni ou Co)

In this work have been studied the preparation, characterization and kinetic study of decomposition of the polymerizing agent used in the synthesis under non-isothermal condition ceramics PrMO3 of general formula (M = Co and Ni). These materials were obtained starting from the respective metal nitrates, as a cations source, and making use of gelatin as polymerizing agent. The powders were calcined at temperatures of 500°C, 700°C and 900°C and characterized by X-ray Diffraction (XRD), Thermogravimetric Analysis (TG / DTG/ DTA), Infrared Spectroscopy (FTIR), Temperature Programmed Reduction (TPR) and Scanning Electron Microscopy (SEM). The perovskite phase was detected in all the X-rays patterns. In the infrared spectroscopy observed the oxide formation as the calcination temperature increases with the appearance of the band metal - oxygen. The images of SEM revealed uniform distribution for the PrCoO3 and particles agglomerated as consequence of particle size for PrNiO3. From the data of thermal analysis, the kinetics of decomposition of organic matter was employed using the kinetics methods called Model Free Kinetics and Flynn and Wall, in the heating ratios 10, 20 and 30° C.min-1 between room temperature and 700°C. Finally, been obtained the values of activation energy for the region of greatest decomposition of organic matter in samples that were determined by the degree of conversion (α)

Procedimento para estudo da escolha modal em viagens realizadas por estudantes de instituições de ensino médio, mediado pela psicologia social

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Produção, acúmulo e decomposição da serapilheira em uma restinga da Ilha do Mel, Paranaguá, PR, Brasil

Em uma formação de restinga na Ilha do Mel, Paranaguá-PR, foram avaliadas, mensalmente, a serapilheira produzida e a acumulada, em quadrados de 0,25 m², durante um ano (julho/1996-junho/1997). A decomposição, mensal e anual, foi estimada, indiretamente, pela razão entre serapilheira produzida e acumulada. A produção anual de serapilheira de 5,1 t.ha-1 encontra-se no limite inferior aos obtidos em outras florestas tropicais, e decorre, provavelmente, do solo arenoso e pobre em nutrientes. A produção e a decomposição foram sazonais, mais intensa durante o período mais quente e chuvoso, estando relacionadas, principalmente, à temperatura. O pequeno acúmulo de serapilheira (5,5t.ha-1.ano -1), e a ausência de variações mensais significativas neste compartimento denotam o sincronismo entre estes processos, que, aliado a taxa de decomposição anual relativamente baixa (kL = 0,92), representa grande valor adaptativo para o ecossistema, pois, pode minimizar as perdas por lixiviação e permitir um melhor aproveitamento dos nutrientes e água disponíveis momentaneamente. Tais mecanismos, bem como o caráter perenifólio das espécies, escleromorfia, e uma rede de raízes superficiais, possibilitam o desenvolvimento da comunidade vegetal sob as condições oligotróficas do solo. Estes, além do clima, parecem exercer uma forte influencia na determinação dos padrões de produção e decomposição da serapilheira.

Síntese de nanopartículas de magnetita via decomposição térmica em meio não-aquoso

This work aims at obtaining nanoparticles of iron oxide, the magnetite one (Fe3O4), via synthesis by thermal decomposition through polyol. Thus, two routes were evaluated: a simple decomposition route assisted by reflux and a hydrothermal route both without synthetic air atmosphere using a synthesis temperature of 260ºC. In this work observed the influence of the observe of surfactants which are generally applied in the synthesis of iron oxide nanoparticles decreasing cluster areas. Further, was observed pure magnetite phase without secondary phases generally found in the iron oxide synthesis, a better control of crystallite size, morphology, crystal structure and magnetic behavior. Finally, the introduction of hydroxyl groups on the nanoparticles surface was analyzed besides its employment in the polymer production with OH radicals. The obtained materials were characterized by XRD, DLS, VSM, TEM, TG and DSC analyses. The results for the magnetite obtainment with a particle size greater than 5 nm and smaller than 11 nm, well defined morphology and good magnetic properties with superparamagnetic behavior. The reflux synthesis was more efficient in the deposition of the hydroxyl groups on the nanoparticles surface

Atenuação de ruídos coerentes utilizando decomposição em modos empíricos

The seismic processing technique has the main objective to provide adequate picture of geological structures from subsurface of sedimentary basins. Among the key steps of this process is the enhancement of seismic reflections by filtering unwanted signals, called seismic noise, the improvement of signals of interest and the application of imaging procedures. The seismic noise may appear random or coherent. This dissertation will present a technique to attenuate coherent noise, such as ground roll and multiple reflections, based on Empirical Mode Decomposition method. This method will be applied to decompose the seismic trace into Intrinsic Mode Functions. These functions have the properties of being symmetric, with local mean equals zero and the same number of zero-crossing and extremes. The developed technique was tested on synthetic and real data, and the results were considered encouraging

El alineamiento modal en el preámbulo de reuniones por videoconferencia

En el presente artículo se introduce el concepto de alineamiento modal, un fenómeno interactivo característico del preámbulo de reuniones por videoconferencia, en las que la interacción puede llevarse a cabo a través del chat escrito, la imagen y la voz. Con tal propósito, se parte del modelo de interacción de Erving Goffman y la metodología del Análisis de la Conversación (AC). A través de una selección de ejemplos extraídos de un corpus de dieciocho interacciones por Adobe Connect 7.0, el análisis muestra que la selección del canal, dentro del contexto analizado, constituye un recurso para el alineamiento y la (re)configuración del marco de participación de las reuniones. Asimismo, se sugiere que dicho recurso es utilizado por los participantes como estrategia para gestionar la orientación recíproca y la toma de turno durante los preámbulos.