Broadband Cylindrical Dielectric Resonator Antenna Excited by Modified Microstrip Line

The impedance bandwidth of a high permittivity cylindrical dielectric resonator antenna excited by a micro strip line was significantly improved by modifying the feed geometry. The 10 dB return loss bandwidth is enhanced from 12 to 26% without much affecting the gain and other radiation properties of the antenna. Good agreement has been observed between the predicted and measured results

An analytical study of the power distribution pattterns of silica waveguides with high paraboloic cylindrical deformation

An attempt is made to determine the relative power distribution in a step-index parabolic cylindrical waveguide (PCW) with high deformation across the direction of propagation. The guide is assumed to be made of silica. The scalar field approximation is employed for the analysis under which a vanishing refractive-index (RI) difference in the waveguide materials is considered. Further, no approximation for folds- is used in the analytical treatment. Due to the geometry of such waceguides, PCWs lose the well-defined modal discreteness, and a kind of mode bunching is observed instead, which becomes much more prominent in PCWs with high bends. However, with the increase in cross-sectional size, the mode-bunching tendency is slightly reduced. The general expressions for power in the guiding and nonguiding sections are obtained, and the fractional power patterns in all of the sections are presented for PCWs of various cross-sectional dimensions. It is observed that the confinement of power in the core section is increased for PCWs of larger cross-sectional size. Moreover, a fairly uniform distribution of power is seen over the modes having intermediate values of propagation constants

Broadband Cylindrical Dielectric Resonator Antenna Excited by Modified Microstrip Line

The impedance bandwidth of a high permittivity cylindrical dielectric resonator antenna excited by a micro strip line was significantly improved by modifying the feed geometry. The 10 dB return loss bandwidth is enhanced from 12 to 26% without much affecting the gain and other radiation properties of the antenna. Good agreement has been observed between the predicted and measured results

Analytical Investigations 0n Collapse of Cylindrical Submarine Shells

Submarine hull structure is a watertight envelope, under hydrostatic pressure when in operation. Stiffened cylindrical shells constitute the major portion of these submarine hulls and these thin shells under compression are susceptible to buckling failure. Normally loss of stability occurs at the limit point rather than at the bifurcation point and the stability analysis has to consider the change in geometry at each load step. Hence geometric nonlinear analysis of the shell forms becomes. a necessity. External hydrostatic pressure will follow the deformed configuration of the shell and hence follower force effect has to be accounted for. Computer codes have been developed based on all-cubic axisymmetric cylindrical shell finite element and discrete ring stiffener element for linear elastic, linear buckling and geometric nonIinear analysis of stiffened cylindrical shells. These analysis programs have the capability to treat hydrostatic pressure as a radial load and as a follower force. Analytical investigations are carried out on two attack submarine cylindrical hull models besides standard benchmark problems. In each case, the analysis has been carried out for interstiffener, interdeepframe and interbulkhead configurations. The shell stiffener attachment in each of this configuration has been represented by the simply supported-simply supported, clamped-clamped and fixed-fixed boundary conditions in this study. The results of the analytical investigations have been discussed and the observations and conclusions are described. Rotation restraint at the ends is influential for interstiffener and interbulkhead configurations and the significance of axial restraint becomes predominant in the interbulkhead configuration. The follower force effect of hydrostatic pressure is not significant in interstiffener and interdeepframe configurations where as it has very high detrimental effect on buckling pressure on interbulkhead configuration. The geometric nonlinear interbulkhead analysis incorporating follower force effect gives the critical value of buckling pressure and this analysis is recommended for the determination of collapse pressure of stiffened cylindrical submarine shells.

Development of a Novel Wideband Cylindrical Dielectric Resonator Antenna

The author presents the development of a new dielectric resonator antenna(DRA) suitable for wideband wireless communication applications.The design comprises of a simple cylindrical dielectric resonator (DR) and a microstrip feed, in a low radiation-Q structure,enabling wide impedance bandwidth.The radiation pattern is conical shaped,resulted from thew low-Q structure.Dielectric constant of the DR,its dimensions and topological parameters of the feed line are the major design parameters of the antenna.By proper selection of these parameters,the DRA can be operated over a wideband width covering multiple wireless applications.The antenna is simulated using Ansoft HFSS TM and measured using HP 8510C vector network analyser.Some of the measured results are confirmed by using the Finite Difference Time Domain(FDTD) technique implemented in MATLAB.

Acoustic radiation and scattering from cylindrical bodies and analysis of transducer arrays

New mathematical methods to analytically investigate linear acoustic radiation and scattering from cylindrical bodies and transducer arrays are presented. Three problems of interest involving cylinders in an infinite fluid are studied. In all the three problems, the Helmholtz equation is used to model propagation through the fluid and the beam patterns of arrays of transducers are studied. In the first problem, a method is presented to determine the omni-directional and directional far-field pressures radiated by a cylindrical transducer array in an infinite rigid cylindrical baffle. The solution to the Helmholtz equation and the displacement continuity condition at the interface between the array and the surrounding water are used to determine the pressure. The displacement of the surface of each transducer is in the direction of the normal to the array and is assumed to be uniform. Expressions are derived for the pressure radiated by a sector of the array vibrating in-phase, the entire array vibrating in-phase, and a sector of the array phase-shaded to simulate radiation from a rectangular piston. It is shown that the uniform displacement required for generating a source level of 220 dB ref. μPa @ 1m that is omni directional in the azimuthal plane is in the order of 1 micron for typical arrays. Numerical results are presented to show that there is only a small difference between the on-axis pressures radiated by phased cylindrical arrays and planar arrays. The problem is of interest because cylindrical arrays of projectors are often used to search for underwater objects. In the second problem, the errors, when using data-independent, classical, energy and split beam correlation methods, in finding the direction of arrival (DOA) of a plane acoustic wave, caused by the presence of a solid circular elastic cylindrical stiffener near a linear array of hydrophones, are investigated. Scattering from the effectively infinite cylinder is modeled using the exact axisymmetric equations of motion and the total pressures at the hydrophone locations are computed. The effect of the radius of the cylinder, a, the distance between the cylinder and the array, b, the number of hydrophones in the array, 2H, and the angle of incidence of the wave, α, on the error in finding the DOA are illustrated using numerical results. For an array that is about 30 times the wavelength and for small angles of incidence (α<10), the error in finding the DOA using the energy method is less than that using the split beam correlation method with beam steered to α; and in some cases, the error increases when b increases; and the errors in finding the DOA using the energy method and the split beam correlation method with beam steered to α vary approximately as a7 / 4 . The problem is of interest because elastic stiffeners – in nearly acoustically transparent sonar domes that are used to protect arrays of transducers – scatter waves that are incident on it and cause an error in the estimated direction of arrival of the wave. In the third problem, a high-frequency ray-acoustics method is presented and used to determine the interior pressure field when a plane wave is normally incident on a fluid cylinder embedded in another infinite fluid. The pressure field is determined by using geometrical and physical acoustics. The interior pressure is expressed as the sum of the pressures due to all rays that pass through a point. Numerical results are presented for ka = 20 to 100 where k is the acoustic wavenumber of the exterior fluid and a is the radius of the cylinder. The results are in good agreement with those obtained using field theory. The directional responses, to the plane wave, of sectors of a circular array of uniformly distributed hydrophones in the embedded cylinder are then computed. The sectors are used to simulate linear arrays with uniformly distributed normals by using delays. The directional responses are compared with the output from an array in an infinite homogenous fluid. These outputs are of interest as they are used to determine the direction of arrival of the plane wave. Numerical results are presented for a circular array with 32 hydrophones and 12 hydrophones in each sector. The problem is of interest because arrays of hydrophones are housed inside sonar domes and acoustic plane waves from distant sources are scattered by the dome filled with fresh water and cause deterioration in the performance of the array.

Artificial neural network modeling for surface roughness prediction in cylindrical grinding of Al‐SiCp metal matrix composites and ANOVA analysis

Metal matrix composites (MMC) having aluminium (Al) in the matrix phase and silicon carbide particles (SiCp) in reinforcement phase, ie Al‐SiCp type MMC, have gained popularity in the re‐cent past. In this competitive age, manufacturing industries strive to produce superior quality products at reasonable price. This is possible by achieving higher productivity while performing machining at optimum combinations of process variables. The low weight and high strength MMC are found suitable for variety of components

Sostenibilidad fiscal: una aproximación con datos panel para 8 países Latinoaméricanos

Este documento examina la hipótesis de sostenibilidad fiscal para 8 países de Latinoamérica. A partir de un modelo de datos panel, se determina si los ingresos y gasto primario de los Gobiernos entre 1960 - 2009 están cointegrados, es decir, si son sostenibles a largo plazo. Para esto, se utilizaron pruebas de raíz unitaria y cointegración de segunda generación con datos panel macroeconómicos, lo que permite tener en cuenta la dependencia cruzada entre los países, así como los posibles quiebres estructurales en la relación que estén determinados de manera endógena; en particular, se usan la prueba de estacionariedad de Hadri y Rao (2008) y la prueba de cointegración de Westerlund (2006). Como resultado del análisis se encontró evidencia empírica de que en el período bajo estudio el déficit primario en los 8 países latinoamericanos es sostenible pero en sentido débil.

Blackboard 9 Control Panel

The first 3-minute video in a series introducing the new featurs of Blackboard 9.

Modelo de gestión de la red de distribución tercerizada segmento tiendas región central, en productos de consumo masivo, mediante datos de panel y simulación de Monte Carlo.

El proyecto de investigación parte de la dinámica del modelo de distribución tercerizada para una compañía de consumo masivo en Colombia, especializada en lácteos, que para este estudio se ha denominado “Lactosa”. Mediante datos de panel con estudio de caso, se construyen dos modelos de demanda por categoría de producto y distribuidor y mediante simulación estocástica, se identifican las variables relevantes que inciden sus estructuras de costos. El problema se modela a partir del estado de resultados por cada uno de los cuatro distribuidores analizados en la región central del país. Se analiza la estructura de costos y el comportamiento de ventas dado un margen (%) de distribución logístico, en función de las variables independientes relevantes, y referidas al negocio, al mercado y al entorno macroeconómico, descritas en el objeto de estudio. Entre otros hallazgos, se destacan brechas notorias en los costos de distribución y costos en la fuerza de ventas, pese a la homogeneidad de segmentos. Identifica generadores de valor y costos de mayor dispersión individual y sugiere uniones estratégicas de algunos grupos de distribuidores. La modelación con datos de panel, identifica las variables relevantes de gestión que inciden sobre el volumen de ventas por categoría y distribuidor, que focaliza los esfuerzos de la dirección. Se recomienda disminuir brechas y promover desde el productor estrategias focalizadas a la estandarización de procesos internos de los distribuidores; promover y replicar los modelos de análisis, sin pretender remplazar conocimiento de expertos. La construcción de escenarios fortalece de manera conjunta y segura la posición competitiva de la compañía y sus distribuidores.

El plafó informatiu com a recurs didáctic a l'educació física. 'El panel informativo como recurso didático en la educación física'.

Resumen de la revista en catalán. Este artículo forma parte del monográfico 'Experiències d'escoles'

An analysis of the relationship between wages in the public and private sector in colombia : a panel data approach

This document examines the time-series properties of the wage differentials that arise between the public and private sector in Colombia during the sample period 1984 to 2005. We Find conflicting results in unit-root and stationary tests when looking at wage differentials at an aggregate level (such as for men, women or both). However, when we analyse wage differentials at higher levels of disaggregation, treat them jointly as a panel of data, and allow for the presence of potential cross section dependence, there is more supportive evidence for the view that wage differentials are stationary. This implies that although wage differentials do exist, they have not been consistently increasing (or decreasing) over time.

Convergencia en Bolivia: un enfoque espacial con datos de panel dinámicos

Este artículo analiza el fenómeno de convergencia del Producto Interno Bruto (PIB) regionaldesde una perspectiva espacial para Bolivia durante el periodo 1988-2011. Los resultadospermiten obtener dos conclusiones. Primero, se puede observar el fenómeno de convergenciaal estado estacionario en los departamentos de Bolivia con una velocidad de entre 4 % y 7 %.Segundo, los resultados presentan evidencia estadística de que no existe dependencia espacialentre los departamentos de Bolivia, es decir, la velocidad de convergencia de un departamentono parece verse afectada por el PIB de los departamentos vecinos. Adicionalmente nuestrosresultados se muestran robustos a distintas especificaciones.

Panel didáctico (display).

El artículo forma parte de una sección de la revista dedicada al intercambio de experiencias

Beneficios e impactos de las soluciones de Inteligencia de Negocios en el sector de servicios aeroportuarios. Caso de estudio: diseño de un panel de control para el área de operaciones del Aeropuerto Mariscal Sucre de Quito

El presente estudio ilustra los beneficios e impactos que tiene una solución de inteligencia de negocios en el sector de servicios aeroportuarios, desde el punto de vista táctico y operativo basado en el comportamiento del transporte aéreo nacional e internacional del aeropuerto de Quito. En el desarrollo se describen los sistemas de información y el papel que éstos desempeñan en las organizaciones, para luego dar a conocer la arquitectura y funcionalidad de las soluciones de inteligencia de negocios y el rol que juegan en la toma de decisiones, en un mundo donde una decisión puede marcar el éxito o fracaso. Se detalla el ambiente en el que se desarrollan las operaciones de transporte aéreo, para incursionar en el campo del aeropuerto de Quito y de la empresa encargada de la operación y provisión de servicios aeroportuarios. La tesis, aborda el diseño e implementación de un prototipo de inteligencia de negocios que presenta paneles de control para el área de operaciones del aeropuerto generando tableros inteligentes, dashboards, semáforos, gráficos y reportes dinámicos. Finalmente, se explota la solución a través de la minería de inteligencia de negocios que implica indagar, analizar, dar respuesta a preguntas clave, descubrir nuevas oportunidades e identificar acciones tácticas y operacionales como: el establecimiento de alianzas con aerolíneas y aeropuertos; desarrollo de nuevas rutas aeronáuticas; impulso y potenciación del turismo; entre otras. El Aeropuerto Mariscal Sucre de Quito, tendrá una ventaja competitiva al contar con información clave para la toma acertada de decisiones de los diferentes niveles gerenciales, en el momento y espacio requerido.