Comparison of Standard Length, Fork Length, and Total Length for Measuring West Coast Marine Fishes

Measurements of adult marine fishes on the U.S. west coast are usually made using one of three methods: standard length, fork length, or total length. Each method has advantages and disadvantages. In this paper we attempt to determine whether one method is faster and/or more reliable than the other methods. We found that all three methods were comparable. There was no appreciable difference in the time it took to measure fish using the different methods. Fork length had the most reproducible results; however, it had the highest level of bias between researchers. We therefore suggest that selection of measurement type be based on what other researchers have used for the species under study. The best improvement in measurement reliability probably occurs by adequate training of personnel and not type of measurement used.

Measuring Fishing Capacity and Utilization with Commonly Available Data: An Application to Alaska Fisheries

Due to a lack of data on vessel costs, earnings, and input use, many of the capacity assessment models developed in the economics literature cannot be applied in U.S. fisheries. This incongruity between available data and model requirements underscores the need for developing applicable methodologies. This paper presents a means of assessing fishing capacity and utilization (for both vessels and fish stocks) with commonly available data, while avoiding some of the shortcomings associated with competing “frontier” approaches (such as data envelopment analys

Development and validation of a new method for measuring friction between skin and nonwoven materials.

A new method for measuring the coefficient of friction between nonwoven materials and the curved surface of the volar forearm has been developed and validated. The method was used to measure the coefficient of static friction for three different nonwoven materials on the normal (dry) and over-hydrated volar forearms of five female volunteers (ages 18-44). The method proved simple to run and had good repeatability: the coefficient of variation (standard deviation expressed as a percentage of the mean) for triplets of repeat measurements was usually (80 per cent of the time) less than 10 per cent. Measurements involving the geometrically simpler configuration of pulling a weighted fabric sample horizontally across a quasi-planar area of volar forearm skin proved experimentally more difficult and had poorer repeatability. However, correlations between values of coefficient of static friction derived using the two methods were good (R = 0.81 for normal (dry) skin, and 0.91 for over-hydrated skin). Measurements of the coefficient of static friction for the three nonwovens for normal (dry) and for over-hydrated skin varied in the ranges of about 0.3-0.5 and 0.9-1.3, respectively. In agreement with Amontons' law, coefficients of friction were invariant with normal pressure over the entire experimental range (0.1-8.2 kPa).

The survey of sexual maturity in Mugil cephalus so measuring sex hormones and histologic studies

In this study the process of female gray mullet brooders was carried out by using histological study and masurment of sex steroids. Results of histological studies showed that oocyte of gray mullet brooders in Gomishan Rearing Center conditions of develop to the end of yolk globule stage. The results were observed with oocyte in chromatin nucleolar stage (first stage) with means of diameter of 20 p m, in August, perinucleolar stage (second stage) in September with mean diameter of 87 p m, yolk vesicle stage (third stage) in October with mean diameter 200 p m and yolk granules stage (forth stage) from October to November with average diameter of 180 — 650 p m. For the reason of stopping oocyte develop at the end of fourth stage, hormonal induction to final oocyte maturation and ovulation was used. For this purpose, carp pituitary , HCG and LRH-A2 with different combinations were used in two stages, second injection was used 24 hours after first injection. 15 females brooders were divided in 5 groups, different hormonal combinations were injected to four groups and to fifth group as control, only saline, was injected. The process of female brooder rippening in hormonal induction was studied via masurment of sex steroids including 17 a - hydroxy progestrone, estradio1-17)6 and testosterone. Blood samples were collected from caudal vein during first injection, 24, 30 and 48 hours after the first injection. At the same time, for distinguishing histological changes the sample has been attained from the gonads Sex stroid fluctuation patterns in different brooder groups that injected hormon were similar, however hormonal composition had similar effects. All brooder that their oocyte in the beginning of hormonal injection were At the end of fourth stage with oocyte diameter average of 600 p m received to final maturation and ovulation. The brooder that its oocytes were At the begining or mid-fourth stage did not show ovulation but hormonal induction caused oocyte develop at the beginning of fifth stage. Study of 17-hydroxy progestrone fluctuation showed that the maximum level of this steroid (0.347 ng/ml) measured 30 hours after the first injection and was significantly higher (p< 0.05) than those of control group. So, 17-hydroxy progestrone is probably precursor of maturation inducing steroid (MIS). However the maximum level of that observed was coincident with germinal vesicle breakdown, oil droplets coalescence and dissolution of yolk granuls The maximum levels of esteradiol— 17/0 and testosterone (3.778 and 16.801ng/ml,respectively) in spawned brooders,were observed 24 hours after the first injection. levels of those steroids were significantly higher (p<0.05) than control group. Maximum level of sex steroids in the brooders that did not spawn to the end of treatment was observed with more delay than those in spawned brooders. Therefor maximum level of 17a-hydroxy progestrone (0.264 ng/ml) in those brooders observed in fourth sampling time and the maximum levels of estradio1-17a and testosterone (2.944 and 18.993 ng/ml, respectivly)observed in third sampling time that was significantly higher (p<0.05) than those of control group. For the study of stress effect on brooders during the hormonal induction, level of cortisol was measured in every sampling time. level of cortisol had high fluctuation that showed handling level and stress effect on brooders. However maximum level of cortisol in majority of brooders was dominant in third sampling time that was coincident with final maturation.

Liver cytochrome oxidase P4501A1 purification of Acipenser persicus and designing ELISA for measuring

Moon oxygenases related to cytochrome P450s are the molecular Biomarkers which have important role in Biotransformation of endogenous and exogenous compounds and catalazyin of many biological reactions. One of the important isoenzyme is cytochrome P4501A. This isoenzyme involved in metabolism of environment pollutnts such as PAHs. Because of its inducibility, it has a key tool for impact assesment of contaminants in aquatic environment. In this study, at first, that fractions containing Acipenser persicus and Huso huso isoenzyme were purified, and after that Antibodies against them were prepared. For isolation of isoenzyme fraction, Microsomes were prepared from fish liver using differential centrifugation at high speeds. microsomes were solubiized by cholat sodium and Emulgen. Extraction of this isoenzyme was done with the combinatuion of ionexchange chromatography and gelfiltration or chromatofocusing chromatography. Ion exchange chromatography and gel filtration were applied in DEAE sepharose fast flow and sephacryl S200 respectively and chromatofocusing was done at poly buffer 74 and 94 exchanger. The results of SDS-PAGE Showed that the molecular weight of isoenzyme was about 58±1 KDa. Furthermore the inmunoblotting results confirmed this subject. Isoenzyme activigy based on EROD (Ethoxyresorofin o-deethylase) reaction showed about 20-26 fold increase in enzyme activity of treated fish than control fish. The results of Elisa, Using monoclonal anti cod P4501A demonstrated the inducibility and highly elevated of its activity in treated sample more than the control fish. Mean while, the fish sample were showed the strong reaction to polyclonal antibody against beluga P4501A1 prepared in our Lab compared to monoclonal anti body.

Measuring design investment in firms: Conceptual foundations and exploratory UK survey

The importance of design to company and national performance has been widely discussed, with a number of studies investigating the value or impact of design on performance. However, none of these studies has measured design investment as an input against which performance can be compared. As yet, there is no established way in which design investment might be measured. Without such a method, we cannot develop a reliable picture, akin to that for R&D spending, on the impact of design spending on company performance. This paper presents a conceptual framework for the measurement of design investment and applies this framework in a survey of UK firms. The framework describes design as being part of the creation and commercialization of new products and services. The survey highlights some surprising patterns of design spend in the reported sample and demonstrates the viability of the underpinning framework. A revised framework is proposed that situates design investment in the context of R&D. The model has implications for policy makers trying to understand the role and scale of design in the private sector, for managers wishing to optimize their design investments and for academics seeking to measure the value of design. © 2013 Published by Elsevier B.V.

Applicability of the MTT assay for measuring viability of cyanobacteria and algae, specifically for Microcystis aeruginosa (Chroococcales, Cyanobacteria)

Several assay methods were screened for viability assessment in cyanobacteria using Microcystis aeruginosa FACHB 905. Compared with fluorescent diacetate (FDA), Evan's Blue and autofluorescence, the 3-[4,5-dimethylthiazol-2-yl]2,5-diphenyl tetrazolium bromide (MTT) assay, which was based on the ability of viable cells to reduce MTT to formazan, was found to be reliable and was selected for further study. MTT concentration, incubation time and temperature were optimized for M. aeruginosa. Improvements to the sensitivity and reproducibility of the MTT assay included performing it in the dark to reduce the effects of formazan light sensitivity when extracted in DMSO. Another improvement involved collecting viability data by cell by counting rather than colourimetrically, which was concluded from the fact that oxidoreductase activity, responsible for MTT reduction, would elevate or decrease under stress conditions. Half-life of oxidoreductase in dead cell was calculated to be 3 h. The MTT assay was also found to be applicable to other cyanobacteria and diatoms, including field samples, but not for algae belonging to Chlorophyta, Euglenophyta, Pyrrophyta or Chrysophyta. Based on the above results, we proposed an optimized procedure for the MTT method on Microcystis strains. The use of this assay may be of importance to better understand the dynamics of bloom and the fate of Microcystis under natural or disturbed conditions.

Method for measuring two-qubit entanglement of formation by local operations and classical communication

We present a parametrically efficient method for measuring the entanglement of formation E-f in an arbitrarily given unknown two-qubit state rho(AB) by local operations and classical communication. The two observers, Alice and Bob, first perform some local operations on their composite systems separately, by which the desired global quantum states can be prepared. Then they estimate seven functions via two modified local quantum networks supplemented a classical communication. After obtaining these functions, Alice and Bob can determine the concurrence C and the entanglement of formation E-f.

Fabrication of semiconductor optical amplifiers and a novel gain measuring technique

The design and fabrication of 1550 nm semiconductor optical amplifiers (SOAs) and the characteristics of the fabricated SOA are reported. A novel gain measurement technique based on the integrations of the product of emission spectrum and a phase function over one mode interval is proposed for Fabry-Perot semiconductor lasers.