989 resultados para Comparable corpora
Resumo:
We show photorheology in aqueous solutions of weakly entangled wormlike micelles prepared with cetyltrimethylammonium bromide (CTAB), salicylic acid (HSal), and dilute amounts of the photochromic multistate compound trans-2,4,4'-trihydroxychalcone (Ct). Different chemical species of Ct are associated with different colorations and propensities to reside within or outside CTAB micelles. A light-induced transfer between the intra- and intermicellar space is used to alter the mean length of wormlike micelles and hence the rheological properties of the fluid, studied in steady-state shear Bow and in dynamic rheological measurements. Light-induced changes of fluid rheology are reversible by a the relaxation process. at relaxation rates which depend on pH and which are consistent with photochromic reversion rates measured by UV-vis absorption spectroscopy. Parameterizing viscoelostic rheological states by their effective relaxation time tau(c) and corresponding response modulus G(c), we find the light and dark states of the system to fall onto a characteristic state curve defined by comparable experiments conducted without photosensitive components. These reference experiments were prepared with the same concentration of CTAB, but different concentrations of HSal or sodium salicylote (NaSal), and tested at different temperatures.
Resumo:
Se describen los resultados de un estudio epidemiológico del estado de la salud bucal en escolares de nivel primario (6 y 12 años) matriculados en establecimientos municipales, provinciales y privados de la Ciudad de Córdoba, Provincia de Córdoba, Argentina. En los niños de 6 años de escuelas municipales, la prevalencia de caries en elementos temporarios fue de moderada a alta, resultando baja para los escolares provinciales y privados (ceo-d = 4,44 , 2,31 y 1,27, respectivamente). Tanto en escolares municipales como provinciales, los componentes de mayor peso en el ceo-d fueron dientes cariados y con extracción indicada, en tanto que en los privados correspondió a dientes obturados. La proporción de niños sin caries activa fue de 13,6% en las escuelas municipales, 52,2% en las provinciales y 76,9% en las privadas. En los escolares de 12 años, la prevalencia de caries en dentición permanente resultó baja y comparable en los tres grupos de escuelas, registrándose un índice CPO-D que osciló entre 1,85 (municipales) y 2,59 (privados). Para ambas edades, las necesidades de tratamiento odontológico fueron elevadas en las tres poblaciones escolares. Se concluye que los niveles de salud dental alcanzados por los escolares municipales y provinciales a la edad de 12 años deben atribuirse principalmente al impacto producido por la aplicación de medidas preventivas, cuya eficiencia podría ser aumentada si se orientaran a atender edades más tempranas, sobre todo en las poblaciones de mayor riesgo.
Resumo:
Ante el creciente deterioro ambiental y sus posibles consecuencias en la salud de la población resulta una prioridad indiscutible el diseño e instrumentación de políticas que controlen las actividades económicas bajo el criterio de protección a la salud humana y al ambiente mismo. Es preciso que dichas políticas consideren la factibilidad económica de las alternativas de protección existentes. Sin embargo, por la cantidad de intereses dentro del área ambiental, otros factores como el social y el político deben también ser considerados. La evaluación económica ha sido vista como un promisorio fundamento para la toma de decisiones en esta materia. Los autores analizan la capacidad de esta herramienta para organizar en forma sistemática y comparable los costos y los beneficios de alternativas para la solución de problemas ambientales. Se resumen las principales características de los estudios de costo-beneficio y costo-efectividad, las formas de evaluación económica del ambiente, y las particularidades de esta área para la aplicación de dichas técnicas de análisis. Se señalan los límites encontrados en estas herramientas para cuantificar los costos no monetarios de los riesgos ambientales y de los consecuentes daños a la salud, tales como el dolor, el sufrimiento ó la incapacidad de personas económicamente inactivas, constituyendo estos aspectos el reto metodológico de la evaluación económica en el área. Se reflexiona sobre la importancia de ampliar los insumos informativos para la toma de decisiones en materia de salud ambiental en aspectos como la distribución de los costos y los beneficios entre los distintos grupos sociales. Por último se señala tanto la creciente politización del tema ambiental, como la posibilidad técnica de manipulación de estas herramientas de análisis. Partiendo de estos elementos se señala la necesidad, por parte de los evaluadores, de ser conscientes sobre las implicaciones políticas de sus estudios, así como de la importancia de su vinculación con los tomadores de decisión con el objetivo de lograr pertinencia en el ejercicio académico.
Resumo:
HENRE II (Higher Education Network for Radiography in Europe)
Resumo:
INTRODUCTION: The correct identification of the underlying cause of death and its precise assignment to a code from the International Classification of Diseases are important issues to achieve accurate and universally comparable mortality statistics These factors, among other ones, led to the development of computer software programs in order to automatically identify the underlying cause of death. OBJECTIVE: This work was conceived to compare the underlying causes of death processed respectively by the Automated Classification of Medical Entities (ACME) and the "Sistema de Seleção de Causa Básica de Morte" (SCB) programs. MATERIAL AND METHOD: The comparative evaluation of the underlying causes of death processed respectively by ACME and SCB systems was performed using the input data file for the ACME system that included deaths which occurred in the State of S. Paulo from June to December 1993, totalling 129,104 records of the corresponding death certificates. The differences between underlying causes selected by ACME and SCB systems verified in the month of June, when considered as SCB errors, were used to correct and improve SCB processing logic and its decision tables. RESULTS: The processing of the underlying causes of death by the ACME and SCB systems resulted in 3,278 differences, that were analysed and ascribed to lack of answer to dialogue boxes during processing, to deaths due to human immunodeficiency virus [HIV] disease for which there was no specific provision in any of the systems, to coding and/or keying errors and to actual problems. The detailed analysis of these latter disclosed that the majority of the underlying causes of death processed by the SCB system were correct and that different interpretations were given to the mortality coding rules by each system, that some particular problems could not be explained with the available documentation and that a smaller proportion of problems were identified as SCB errors. CONCLUSION: These results, disclosing a very low and insignificant number of actual problems, guarantees the use of the version of the SCB system for the Ninth Revision of the International Classification of Diseases and assures the continuity of the work which is being undertaken for the Tenth Revision version.
Resumo:
The aim of this paper is to formulate an approximation of the US actuarial balance model and apply it to the Spanish public retirement pension system under various scenarios in order to determine a consistent indicator of the system's financial state comparable to those used by the most advanced social security systems. This will enable us to answer the question as to whether there is any justification for reforming the pension system in Spain. This type of actuarial balance uses projections to show future challenges to the financial side of the pension system deriving basically from ageing, the projected increase in longevity and fluctuations in economic activity. If one is compiled periodically it can provide various indicators to help depoliticize the management of the pay-as-you-go system by bringing the planning horizons of politicians and the system itself closer together.
Resumo:
Mestrado em Tecnologia de Diagnóstico e Intervenção Cardiovascular. Área de especialização: Intervenção Cardiovascular.
Resumo:
Introdução – Avaliar a força de preensão mostrou ser de primordial importância pela sua relação com a capacidade funcional dos indivíduos, permitindo determinar níveis de risco para incapacidade futura e, assim, estabelecer estratégias de prevenção. Grande parte dos estudos utiliza o dinamómetro hidráulico JAMAR que fornece o valor da força isométrica obtida durante a execução do movimento de preensão palmar. Contudo, existem outros dinamómetros disponíveis, como é o caso do dinamómetro portátil computorizado E‑Link (Biometrics) que fornece o valor da força máxima (peak force), para além de outras variáveis, como a taxa de fadiga. Não existem, contudo, estudos que nos permitam aceitar e comparar ou não os valores obtidos com os dois equipamentos e porventura utilizá‑los indistintamente. Objetivos – Avaliar a concordância entre as medições da força de preensão (força máxima ou peak force em Kg) obtida a partir de dois equipamentos diferentes (dinamómetros portáteis): um computorizado (E‑Link, Biometrics) e outro hidráulico (JAMAR). Metodologia – Foram avaliados 29 indivíduos (13H; 16M; 22±7 anos; 23,2±3,3 kg/m2) em 2 dias consecutivos, na mesma altura do dia. A posição de teste escolhida foi a recomendada pela Associação Americana de Terapeutas Ocupacionais e foi escolhido o melhor resultado de entre 3 tentativas para a mão dominante. Realizou‑se uma análise correlacional entre os valores obtidos na variável analisada em cada equipamento (coeficiente de Spearman) e uma análise de Bland & Altman para verificar a concordância entre as duas medições. Resultados – O coeficiente de correlação entre as duas medições foi elevado (rS= 0,956; p<0,001) e, pela análise de Bland & Altman, os valores obtidos encontram‑se todos dentro do intervalo da média±2SD. Conclusões – As duas medições mostraram ser concordantes, revelando que os dinamómetros testados podem ser comparáveis ou utilizados indistintamente em diferentes estudos e populações. ABSTRACT: Introduction – Assess grip strength has proved to be of vital importance because of its relationship with functional capacity of individuals, in order to determine levels of risk for future disability and thereby establish prevention strategies. Most studies use the JAMAR Hydraulic dynamometer that provides the value of isometric force obtained during the performance of grip movement. However, there are other dynamometers available, such as portable computerized dynamometer E‑Link (Biometrics), which provides the value of maximum force (peak force) in addition to other variables as the rate of fatigue. There are no studies that allow us to accept or not and compare values obtained with both devices and perhaps use them interchangeably. Purpose – To evaluate the agreement between the measurements of grip strength (peak force or maximum force in kg) obtained from two different devices (portable dynamometers): a computerized (E‑Link, Biometrics) and a hydraulic (JAMAR). Methodology – 29 subjects (13H, 16M, 22 ± 7 years, 23.2 ± 3.3 kg/m2) were assessed on two consecutive days at the same time of day. The test position chosen was recommended by the American Association of Occupational Therapists and was considered the best result from three attempts for the dominant hand. A correlation was studied between values obtained in the variable analyzed in each equipment (Spearman coefficient) and Bland‑Altman analysis to assess the agreement between the two measurements. Results – The correlation coefficient between the two measurements was high (rs = 0,956, p <0,001) and Bland & Altman analysis of the values obtained are all within the range of mean±2SD. Conclusions – The two measurements were shown to be concordant, revealing that the tested dynamometers can be comparable or used interchangeably in different studies and populations.
Resumo:
The aim of this study was the assessment of exposure to ultrafine in the urban environment of Lisbon, Portugal, due to automobile traffic, and consisted of the determination of deposited alveolar surface area in an avenue leading to the town center during late spring. This study revealed differentiated patterns for weekdays and weekends, which could be related with the fluxes of automobile traffic. During a typical week, ultrafine particles alveolar deposited surface area varied between 35.0 and 89.2 μm2/cm3, which is comparable with levels reported for other towns such in Germany and the United States. These measurements were also complemented by measuring the electrical mobility diameter (varying from 18.3 to 128.3 nm) and number of particles that showed higher values than those previously reported for Madrid and Brisbane. Also, electron microscopy showed that the collected particles were composed of carbonaceous agglomerates, typical of particles emitted by the exhaustion of diesel vehicles. Implications: The approach of this study considers the measurement of surface deposited alveolar area of particles in the outdoor urban environment of Lisbon, Portugal. This type of measurements has not been done so far. Only particulate matter with aerodynamic diameters <2.5 (PM2.5) and >10 (PM10) μm have been measured in outdoor environments and the levels found cannot be found responsible for all the observed health effects. Therefore, the exposure to nano- and ultrafine particles has not been assessed systematically, and several authors consider this as a real knowledge gap and claim for data such as these that will allow for deriving better and more comprehensive epidemiologic studies. Nanoparticle surface area monitor (NSAM) equipments are recent ones and their use has been limited to indoor atmospheres. However, as this study shows, NSAM is a very powerful tool for outdoor environments also. As most lung diseases are, in fact, related to deposition of the alveolar region of the lung, the metric used in this study is the ideal one.
Resumo:
Background: With the decrease of DNA sequencing costs, sequence-based typing methods are rapidly becoming the gold standard for epidemiological surveillance. These methods provide reproducible and comparable results needed for a global scale bacterial population analysis, while retaining their usefulness for local epidemiological surveys. Online databases that collect the generated allelic profiles and associated epidemiological data are available but this wealth of data remains underused and are frequently poorly annotated since no user-friendly tool exists to analyze and explore it. Results: PHYLOViZ is platform independent Java software that allows the integrated analysis of sequence-based typing methods, including SNP data generated from whole genome sequence approaches, and associated epidemiological data. goeBURST and its Minimum Spanning Tree expansion are used for visualizing the possible evolutionary relationships between isolates. The results can be displayed as an annotated graph overlaying the query results of any other epidemiological data available. Conclusions: PHYLOViZ is a user-friendly software that allows the combined analysis of multiple data sources for microbial epidemiological and population studies. It is freely available at http://www.phyloviz.net.
Resumo:
The aim of this study was to contribute to the assessment of exposure levels of ultrafine particles in the urban environment of Lisbon, Portugal, due to automobile traffic, by monitoring lung deposited alveolar surface area (resulting from exposure to ultrafine particles) in a major avenue leading to the town center during late spring, as well as in indoor buildings facing it. Data revealed differentiated patterns for week days and weekends, consistent with PM2.5 and PM10 patterns currently monitored by air quality stations in Lisbon. The observed ultrafine particulate levels may be directly correlated with fluxes in automobile traffic. During a typical week, amounts of ultrafine particles per alveolar deposited surface area varied between 35 and 89.2 μm2/cm3, which are comparable with levels reported for other towns in Germany and the United States. The measured values allowed for determination of the number of ultrafine particles per cubic centimeter, which are comparable to levels reported for Madrid and Brisbane. In what concerns outdoor/indoor levels, we observed higher levels (32 to 63%) outdoors, which is somewhat lower than levels observed in houses in Ontario.
Resumo:
The aim of this study is to contribute to the assessment of exposure levels of ultrafine particles (UFP) in the urban environment of Lisbon, Portugal, due to automobile traffic, by monitoring lung-deposited alveolar surface area (resulting from exposure to UFP) in a major avenue leading to the town centre during late Spring, as well as in indoor buildings facing it. This study revealed differentiated patterns for week days and weekends, consistent with PM(2.5) and PM(10) patterns currently monitored by air quality stations in Lisbon. The observed ultrafine particulate levels could be directly related with the fluxes of automobile traffic. During a typical week, UFP alveolar deposited surface area varied between 35.0 and 89.2 µm(2)/cm(3), which is comparable with levels reported for other towns such in Germany and United States. The measured values allowed the determination of the number of UFP per cm(3), which are comparable to levels reported for Madrid and Brisbane. In what concerns outdoor/indoor levels, we observed higher levels (32-63%) outdoor, which is somewhat lower than levels observed in houses in Ontario.
Resumo:
In music genre classification, most approaches rely on statistical characteristics of low-level features computed on short audio frames. In these methods, it is implicitly considered that frames carry equally relevant information loads and that either individual frames, or distributions thereof, somehow capture the specificities of each genre. In this paper we study the representation space defined by short-term audio features with respect to class boundaries, and compare different processing techniques to partition this space. These partitions are evaluated in terms of accuracy on two genre classification tasks, with several types of classifiers. Experiments show that a randomized and unsupervised partition of the space, used in conjunction with a Markov Model classifier lead to accuracies comparable to the state of the art. We also show that unsupervised partitions of the space tend to create less hubs.
Resumo:
OBJECTIVE: To determine the prevalence of experiencing intra-familial violence among Mexican and Egyptian youth and to describe its associated risk factors. METHODS: Data from questionnaires applied to 12,862 Mexican and 5,662 Egyptian youth, aged 10 to 19, who attended public schools were analyzed. Biviarate and logistic regression analysis were used to determine the relationship between socio-demographics, the experience of intra-familial violence and violence perpetration. RESULTS: The prevalence of having experienced intra-familial violence was comparable across the Mexican and Egyptian populations (14% and 17%, respectively). In Mexico, young men were more likely to have experienced such violence (OR=2.36) than women, whereas in Egypt, young women were at slightly greater risk than young men (OR=1.25). Older age, male gender and urban residence were independent correlates of experiencing intra-familial violence among Mexican youth. For Egyptian adolescents, in contrast, younger age, female gender and having non-married parents were independent correlates of victimization. Intra-familial violence victims were also more likely than non-victims to perpetrate violence (Mexico: OR=13.13; Egypt: OR=6.58). CONCLUSIONS: Mexican and Egyptian youth experienced intra-familial violence at a relatively low prevalence when compared with youth of other countries. A strong association was found between experiencing intra-familial violence and perpetrating violence.
Resumo:
Pneumocystis pneumonia (PCP) is one of the most frequent causes of mortality among HIV-infected patients. Primaquine (PQ) is an antimalarial 8-aminoquinoline effective against PCP when given in combination with clindamycin. This has drawn the attention of Medicinal Chemists towards the anti-PCP activity of 8-aminoquinolines, not only confined to those exhibiting antimalarial activity [1]. It is thought that anti-PCP 8-aminoquinolines exert their anti-PCP activity by acting on the electronic transport and redox system of the P. carinii pathogen [1]. Recently, our research group has been developing imidazolidin-4-one derivatives of PQ (Scheme 1), targeting novel compounds with improved therapeutic action, namely, higher resistance to metabolic inactivation, lower toxicity and equal or higher antimalarial activity than that of the parent drug [2,3]. These imidazolidin-4-ones were seen to block the transmission of rodent malaria, caused by Plasmodium berghei on BalbC mice, to the mosquito vector Anopheles stephensi [3]. The anti-PCP activity of our PQ derivatives is now under study and preliminary in vitro assays [4] show that some of the compounds exhibit slight to moderate activity after a 72 h incubation period against P. carinii. In one case, the IC50 was comparable to that of parent PQ. Both these studies and forthcoming results from ongoing biological assays will be presented and discussed.