Avaliação toxicológica durante a biodegradação de óleos e biodiesel

Atividades relacionadas com a extração do petróleo, bem como as atividades derivadas envolvem grandes riscos, que podem ser ambientais ou à saúde humana. Podem ser de forma direta, como os derramamentos, ou indireta, como resíduos gerados pela sua utilização, poluindo ar, corpos d’água e solos. A biorremediação consiste na utilização de microrganismos tais como as bactérias, fungos filamentosos e leveduras para remediar um ambiente contaminado, transformando os compostos em algo pouco tóxico ou sem nenhuma toxicidade. A ciência que estuda os efeitos tóxicos nos organismos e no ambiente se chama toxicologia. Por isso existe uma íntima ligação entre essas duas ciências. O presente projeto tem como objetivo estudar a toxicidade de óleos lubrificantes automotivos (mineral novo, sintético novo e usado), óleos vegetais (novo e usado) e biodiesel durante sua biodegradação em ambiente terrestre. Análises descritivas e comparativas são as bases para o estudo e compreensão da biodegradação dos contaminantes aqui citados. Os testes toxicológicos darão uma idéia de biodegradação dos diferentes contaminantes no solo. Para os testes de toxicidade serão utilizadas sementes de Eruca sativa (rúcula), sementes de Lactuca sativa (alface) e Eisenia andrei (minhoca). Após 180 dias de biodegradação dos compostos pôde-se concluir que o óleo lubrificante sintético é o mais biodegradável e os demais contaminantes necessitam de tempo de biodegradação superior a 6 meses para que sua toxicidade fique baixa.

Análise ecotoxicológica utilizando colunas de winogradsky contaminadas por óleo lubrificante usado e biodiesel

Não disponível

Revisão: propriedades físico-químicas do biodiesel

The present literature review aimed to describe biodisel’s physicochemical properties obtained from different raw materials. Were studied data concerning viscosity, density, cetane number, fl ash point, pour point and calorifi c power of biodiesel produced from soybean oil, coconut, rice bran, cotton, pequi, babassu, mamona, palm, castor, sunfl ower, corn, canola, jatropha and karanja. Considering the diversity of vegetal and animal sources that can be used on the biodiesel production, it is noteworthy the lack of data concerning physicochemical properties of unexplored raw materials. This work may contribute for the creation of database about physicochemical properties of oil and biodiesel from different sources which will allow design and scale-up, both the necessary equipment to the production line and reciprocating engines.

Simulação computacional da extração líquido-líquido fracionada de enzimas para produção de biodiesel

Liquid-liquid extraction is utilized for purification of biomolecules by Aqueous Biphasic Systems (ABS), since this process does not damage the biotechnological potential of these compounds. In this work, using the free software Scilab®, the fractionated liquid-liquid extraction was studied aiming a lipase (target enzyme) partition in a water + PEG + DEX system. Lisozime was considered as contaminant. As computer simulations has been extensively used when a first estimation of technical feasibility of process is desired, this work demonstred that the system is viable for recovery the 80 % till 90 % the target enzyme, but should be noted that the trial aimed only the fractionation of the enzyme target of a contaminant, not its concentration, which should be done by another process.

Caracterização genética de populações de Caryocar brasiliense Cambess. e Jatropha curcas L., espécies potenciais na produção de biodiesel

Pós-graduação em Agronomia - FEIS

Removal of dyes by lignocellulose adsorbents originating from biodiesel production

In this study, use was made of tucumã cake, in natura (TCN) and thermally treated (TCT), as potential alternative adsorbents for the adsorption of cationic and anionic dyes. The effects of the parameters: contact time, adsorbent: adsorbate mass ratio, and initial concentration of dye were analyzed. The adsorption isotherms were established from optimized adsorption parameters. The best conditions for adsorption were: equilibrium time of 7 h, concentration of 25 mg L 1 and ratio of 1:200 for the methylene blue dye; and pH 6.5, concentration of 25 mg L 1 and ratio of 1:200 for the congo red dye. The adsorption process was best represented by the Dubinin–Radushkevich and Sips isotherms. The kinetics of adsorption of the dyes were best described by the pseudo-second-order kinetic and Elovich models. TCT showed the best maximum adsorption capacity (Qm) for the methylene blue dye (63.92 mg g 1 ).

Ethyl biodiesel: Microwave irradiation aiding ethanolysis of waste cooking oil.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correlation Between Apparent Activation Energy and NOx emission of renewable diesel from sugar cane, biodiesel, fossil diesel and their blends

Biofuels and their blends with fossil fuel are important energy resources, which production and application have been largely increased internationally. This study focus on the development of a correlation between apparent activation energy (Ea) and NOx emission of the thermal decomposition of three pure fuels: farnasane (renewable diesel from sugar cane), biodiesel and fossil diesel and their blends. Apparent Activation energy was determined by using thermogravimetry and Model-Free Kinetics. NOx emission was obtained from the European Stationary Cycle (ESC) with OM 926LA CONAMA P7/Euro 5 engine. Results showed that there is a linear correlation between apparent activation energy and NOx emission with R2 of 0,9667 considering pure fuels and their blends which is given as: NOx = 2,2514Ea - 96,309. The average absolute error of this correlation is 2.96% with respect to the measured NOx value. The main advantage of this correlation is its capability to predict NOx emission when either a new pure fuel or a blend of fuels is proposed to use in enginees.

Desempenho de trator agrícola em operação de preparo do solo utilizando diesel e proporções de biodiesel de babaçu

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Opacidade da fumaça do trator agrícola funcionando com biodiesel etílico destilado de babaçu e diesel B S10 em períodos do dia

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Biodiesel etílico de babaçu x diesel B S1800: ensaio de opacidade da fumaça do trator agrícola variando os horários do dia

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Características da carne de cordeiros alimentados com glicerina proveniente da produção de biodiesel

Pós-graduação em Zootecnia - FCAV

Avaliação dos processos de tratamento do glicerol proveniente da produção do biodiesel

The substitution of diesel by biodiesel meets the current scenario to increase the consumption of alternative energy sources promoting sustainable development of a country. However, the production of biodiesel concurrently generates the formation of glycerine in the process is a by-product. The main application of glycerine is in the food industry, cosmetics, soaps, pharmaceuticals, among others, but these segments are not capable of absorbing the generated volume of glycerine, whereas the total volume of the biodiesel produced about 10% correspond to glycerine. Glycerine obtained from the transesterification reaction (necessary for production of biodiesel) triglycerides and alcohol contains certain impurities such as water, salts, esters, alcohol, and residual oil, which decrease the value. Thus, the purification process or the direct use of glycerine become essential to make it competitive biodiesel production process. This work aims to evaluate the different processes of purification and the use of glycerine obtained as by-product in the production of biodiesel. The research was theoretical, based on technical articles and theses published on this subject, and from these databases was established a summary of the most important processes

Influência dos parâmetros de projeto em um motor a combustão interna

This paper discusses the influence of the design parameters in the operation and construction of an internal combustion engine. A theoretical analysis was developed using a standard crank-connecting rod-piston to verify the behavior of the stresses generated in the combustion and transformed into rotational energy of the crank shaft. Design parameters directly influence not only the final result of the characteristics of power and torque, but how the engine must be built to withstand different loads. The choice of parameters of a combustion engine is directly linked with the application of the engine and the final result expected of it function

Síntese, Caracterização Estrutural e Análise do Potencial Catalítico, para a Preparação de Biodiesel, de Niobatos Não Estequiométricos com Estrutura Tungstênio Bronze

Pós-graduação em Química - IBILCE