Estudo de algumas propriedades mecânicas da madeira de um híbrido clonal de Eucalyptus urophylla X Eucalyptus grandis

A procura por madeiras oriundas de reflorestamentos destinadas à serraria é uma realidade já há muitos anos, principalmente aquelas das espécies do gênero Eucalyptus. Visando buscar novas informações importantes para esse mercado, este trabalho objetivou determinar algumas propriedades mecânicas da madeira de um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis de duas idades e provenientes de talhadia simples e de reforma. Os resultados indicaram que a madeira desse híbrido apresenta boas características tecnológicas, destacando-se a segunda tora (a partir de 3 m) com as melhores propriedades de flexão estática (Módulo de Elasticidade - MOE e Módulo de Ruptura - MOR) e Compressão Axial das fibras. As árvores de maior idade (166 meses) e que sofreram dois desbastes apresentaram as melhores propriedades de flexão estática e compressão axial.

Parâmetros dendrométricos e correlações com propriedades tecnológicas em um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis

A qualidade da madeira aparentemente está associada às características dendrométricas, que por sua vez são influenciadas pelas condições de crescimento. Os objetivos deste estudo foram a caracterização dendrométrica e a realização de correlações de Pearson entre alguns parâmetros tecnológicos da madeira do híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis sob três estratos silviculturais. Os dados dendrométricos foram analisados mediante a análise de regressão. Os resultados mostraram que o híbrido apresenta comportamento similar ao das demais madeiras da mesma espécie que cresceram em outras regiões, destacando-se a espessura do alburno no E1 (talhadia simples, 70 meses e com um desbaste), com pouca variação ao longo do fuste. Todas as árvores apresentaram, em geral, baixa conicidade ao longo do fuste e baixo volume de casca entre os estratos. Na correlação de Pearson foram avaliados entre si nove parâmetros dendrométricos, sete físicos e três mecânicos, longitudinalmente em seções de 3 m e na posição medula-casca nas duas primeiras toras. Os coeficientes encontrados demonstram haver fortes correlações entre as propriedades, destacando-se a densidade básica em relação às demais características e o coeficiente de anisotropia, ambas importantes no processo de desdobro e secagem da madeira. Não houve correlações significativas nas contrações lineares e volumétricas ao longo do comprimento do fuste. A variação radial mostrou boas correlações entre todas as propriedades mecânicas avaliadas nas duas primeiras toras. Em contrapartida, as propriedades físicas avaliadas na posição radial não apresentaram correlações significativas.

Influência da arquitetura foliar de miniestacas na propagação clonal de Eucalyptus

Apesar do progresso da silvicultura clonal alcançado por meio da técnica de miniestaquia, pouco se avançou em relação às espécies recalcitrantes, sobretudo com relação ao manejo empregado em miniestacas. Com o objetivo de avaliar a influência da arquitetura de miniestacas na produção de mudas de quatro clones de Eucalyptus, foram realizadas avaliações nas três fases de produção de mudas: 1) Sobrevivência aos 30 dias em casa de vegetação, 2) Enraizamento aos 45 dias em casa de sombra; e 3) Aproveitamento final aos 60 dias na área de rustificação. A taxa de enraizamento foi determinada com base na taxa de sobrevivência aos 30 dias. O delineamento experimental utilizado foi em blocos casualizados com arranjo de tratamento em esquema fatorial 3 x 4, sendo três tipos de arquitetura de miniestaca: 1) folha inteira (100%); 2) folha cortada (50%); e 3) miniestaca cortada em "árvore de natal" (folhas subapicais cortadas em ¾ e basais inteiras) e quatro clones de (Eucalyptus E. dunnii , E. saligna e dois de E. urophylla x E. globulus), com quatro repetições e 100 plantas por bloco. De acordo com os resultados, a produção de mudas foi afetada pelo tipo de arquitetura de miniestacas. A arquitetura que apresentou os melhores resultados nas avaliações foi "árvore de natal" e folha inteira.

Influência do sistema de corte basal de miniestacas na propagação clonal de híbrido de Eucalyptus urophylla x Eucalyptus globulus subsp. maidenii

A técnica de miniestaquia permitiu o estabelecimento de florestas clonais em larga escala. Porém, pouco se avançou no seu manejo em viveiro para genótipos recalcitrantes. Assim, esse estudo teve como objetivo avaliar a influência do sistema de cortes na base de miniestacas na produção de mudas de um clone híbrido de Eucalyptus urophylla x Eucalyptus globulus subsp. maidenii. Desta forma, foram realizadas três avaliações: 1) sobrevivência aos 30 dias em casa de vegetação; 2) enraizamento aos 45 dias em casa de sombra; e 3) aproveitamento final aos 60 dias na área de rustificação. O índice de enraizamento foi determinado com base no percentual de sobrevivência. O delineamento experimental utilizado foi em blocos casualizados constituído de três tratamentos: 1) miniestacas com corte na base perpendicular (testemunha); 2) miniestacas com corte na base em bisel (corte diagonal) e 3) miniestacas cortadas perpendicularmente, com três incisões longitudinais na base. Foram avaliadas quatro blocos de 228 plantas por bloco. Os resultados de enraizamento foram superiores a 80% nos melhores tratamentos e indicam que a propagação do clone via miniestaquia é viável, não apresentando comportamento recalcitrante. Os sistemas de corte basal das miniestaca em bisel e as incisões não favoreceram a formação de raízes.

ABOVEGROUND AND BELOWGROUND BIOMASS AND CARBON ESTIMATES FOR CLONAL EUCALYPTUS TREES IN SOUTHEAST BRAZIL

Eucalyptus plantations represent a short term and cost efficient alternative for sequestrating carbon dioxide from the atmosphere. Despite the known potential of forest plantations of fast growing species to store carbon in the biomass, there are relatively few studies including precise estimates of the amount of carbon in these plantations. In this study it was determined the carbon content in the stems, branches, leaves and roots of a clonal Eucalyptus grandis plantation in the Southeast of Brazil. We developed allometric equations to estimate the total amount of carbon and total biomass, and produced an estimate of the carbon stock in the stand level. Altogether, 23 sample trees were selected for aboveground biomass assessment. The roots of 9 of the 23 sampled trees were partially excavated to assess the belowground biomass at a singletree level. Two models with DBH, H and DBH2H were tested. The average relative share of carbon content in the stem, branch, leaf and root compartments was 44.6%, 43.0%, 46.1% and 37.8%, respectively, which is smaller than the generic value commonly used (50%). The best-fit allometric equations to estimate the total amount of carbon and total biomass had DBH2H as independent variable. The root-to-shoot ratio was relatively stable (C.V. = 27.5%) probably because the sub-sample was composed of clones. Total stand carbon stock in the Eucalyptus plantation was estimated to be 73.38 MgC ha-1, which is within the carbon stock range for Eucalyptus plantations.

CLONAL PROPAGATION OF NEEM (Azadirachta indica A. Juss.) VIA DIRECT AND INDIRECT IN VITRO REGENERATION

ABSTRACTThe study was conducted with shoot tip explants of neem (Azadirachta indica A. Juss) to identify a viable regenerative process. Shoot tips were obtained from neem embryos cultured alternatingly in DKW medium supplemented with BAP and medium without hormones. Initial shoot development was influenced by cotyledon presence. Basal callus, excised from in vitro stem base, also presented organogenic potential. In some cases, plant lines, obtained from each seed, presented different characteristics. The most common characteristic observed in vitro was callus formation at the stem base. However, the rarest characteristics were stem callus formation and leaf senescence. The regenerated shoot tips were further subculture and rooted on a medium supplemented with IBA so that complete plants could be obtained. The rooted plants were transplanted to a greenhouse and successfully acclimatized. No significant differences in in vivo development were observed between neem plants from callus and from shoot tip propagation.

ROOTING MINI-CUTTINGS OF Paulownia fortunei var. mikado DERIVED FROM CLONAL MINI-GARDEN1

ABSTRACTWe aimed to evaluate the technical efficiency of mini-cuttings technique on vegetative propagation of Paulownia fortunei (Seem.) Hemsl. var. Mikado, as well as the possible existence of anatomical barriers to its rooting. Therefore, plants originated from cuttings formed the mini-stumps and, consequently the clonal mini-garden, which was conducted in semi-hydroponic system. We evaluated the survival of mini-stumps and sprouts production for five successive collects, the percentage of mini-cuttings rooting and their anatomical description. The mini-cuttings were prepared with about 6 to 8 cm in length and two leaves reduced by about 50% in the upper third, being remained an area of, approximately 78 cm2 (10 cm diameter). The mini-cuttings were placed in tubes of 53 cm3, with substrate formed with fine vermiculite and carbonized rice hulls (1:1 v/v) and rooted in acclimatized greenhouse. After 30 days we evaluated the percentage of rooted mini-cuttings, radicial vigor (number and length of roots / mini-cutting), callus formation, emission of new shoots and maintenance of the original leaves. The mini-stumps showed 100% survival after five collects and an average production of 76-114 mini-cuttings/m2/month and rooting ranged from 70 to 90%. Mini-cuttings technique is efficient in to propagate adult propagules of the species and there are not anatomical barriers preventing roots emission.

Design and development of the architecture of an agricultural mobile robot

Parameters such as tolerance, scale and agility utilized in data sampling for using in Precision Agriculture required an expressive number of researches and development of techniques and instruments for automation. It is highlighted the employment of methodologies in remote sensing used in coupled to a Geographic Information System (GIS), adapted or developed for agricultural use. Aiming this, the application of Agricultural Mobile Robots is a strong tendency, mainly in the European Union, the USA and Japan. In Brazil, researches are necessary for the development of robotics platforms, serving as a basis for semi-autonomous and autonomous navigation systems. The aim of this work is to describe the project of an experimental platform for data acquisition in field for the study of the spatial variability and development of agricultural robotics technologies to operate in agricultural environments. The proposal is based on a systematization of scientific work to choose the design parameters utilized for the construction of the model. The kinematic study of the mechanical structure was made by the virtual prototyping process, based on modeling and simulating of the tension applied in frame, using the.

Clonal study of avian Escherichia coli strains by fliC conserved-DNA-sequence regions analysis

The clonal relationship among avian Escherichia coli strains and their genetic proximity with human pathogenic E. coli, Salmonela enterica, Yersinia enterocolitica and Proteus mirabilis, was determined by the DNA sequencing of the conserved 5' and 3'regions fliC gene (flagellin encoded gene). Among 30 commensal avian E. coli strains and 49 pathogenic avian E. coli strains (APEC), 24 commensal and 39 APEC strains harbored fliC gene with fragments size varying from 670bp to 1,900bp. The comparative analysis of these regions allowed the construction of a dendrogram of similarity possessing two main clusters: one compounded mainly by APEC strains and by H-antigens from human E. coli, and another one compounded by commensal avian E. coli strains, S. enterica, and by other H-antigens from human E. coli. Overall, this work demonstrated that fliC conserved regions may be associated with pathogenic clones of APEC strains, and also shows a great similarity among APEC and H-antigens of E. coli strains isolated from humans. These data, can add evidence that APEC strains can exhibit a zoonotic risk.

The Application of Enterprise Architecture Approach to Military Concept Development–Case Study

Abstract—Concept development and experimentation (CD&E) plays an important role in driving strategic transformation in the military community. Defence architecture frameworks, such as the NATO architecture framework, are considered excellent means to support CD&E. There is not much empirical evidence, however, to indicate how enterprise architectures (EA) are applied in the military community or particularly in military CD&E. Consequently, this paper describes and discusses empirical application of the EA approach in CD&E. The research method in the paper is a case study. Situational method engineering (SiME) is used as a framework to adapt the EA approach to the case project of the paper. The findings of the paper suggest that the EA is applicable to CD&E work, although all aspects of the original concept could not be expressed in the EA model of the case project. The results also show that the SiME method can support in applying the EA framework to the CD&E in the case project.

Análise fenotípica e genotípica da virulência de Staphylococcus spp. e de sua dispersão clonal como contribuição ao estudo da mastite bovina

A mastite é uma inflamação da glândula mamária causada principalmente por bactérias, dentre as quais o gênero Staphylococcus ocupa um papel importante. Bactérias pertencentes a este gênero são caracterizadas por expressar fatores de virulência que permitem sua persistência e disseminação no hospedeiro. O presente trabalho teve por objetivo avaliar fenogenotipicamente os fatores de virulência de isolados de Staphylococcus spp. a partir de casos de mastite bovina. Foram analisadas 272 amostras de leite provenientes de oito propriedades da região Sul-Fluminense do Estado do Rio de Janeiro. Após identificação, obteve-se um total de 250 isolados de Staphylococcus spp. Estes foram submetidos às provas fenotípicas de detecção da produção de "slime" em microplaca e em ágar vermelho congo; produção de hemolisinas e sinergismo hemolítico; produção de caseinase e DNase. Posteriormente foram submetidos à técnica de PCR para detecção dos genes de produção de cápsula (cap5 e cap8), fibronectina (fnbA,e fnbB), "slime" (icaA e icaD) e hemolisinas (hla e hlb). Do total avaliado, 58% (145/250) foi identificado como Staphylococcus spp. coagulase-negativos e 42% (105/250) como Staphylococcus spp. coagulase-positivos, destes 36,2% (38/105) foram identificados como S. aureus, 11,4% (12/105) como S. intermedius e 3,8% (4/105) como pertencentes ao grupo SIG. Apenas 6,4% (16/250) dos isolados foram produtores de α-hemólise, 4,8% (12/250) de β-hemólise e, 1,6% (4/250) de α e β-hemólise. A produção de caseinase foi observada em 66,4% (166/250), e a produção de "slime" avaliada pela técnica da microplaca em 76,8% (192/250) dos isolados, respectivamente. A DNase foi detectada em ECNs (38/145) e S. aureus (14/38). Os marcadores genéticos avaliados para a produção de slime, icaA e icaD apresentaram nenhuma ou leve concordância com a produção fenotípica, respectivamente, utilizando o coeficiente Kappa. Tal dado parece indicar que outros marcadores genéticos podem estar envolvidos com a expressão desta característica. Os demais genes detectados com frequência de 4% (10/250) para cap5 e para cap8, 32,8% (82/250) para fnbA, 4,4% (11/250) para fnbB, 19,2% (48/250) para hla e 18% (45/250) para hlb. O perfil circulante nas propriedades foi o 1: isolado produtor de "slime" e caseinase. O gene spaA foi positivo em todos os S. aureus, apresentando amplicons de tamanhos variados, sendo o tamanho prevalente o de 300pb. A amplificação do gene coa apresentou nove tipos polimórficos distintos, sendo prevalente o amplicon de 600pb. O gene agr foi detectado em todos os S. aureus, com amplicon de 200pb. Foi observado que os genes de virulência estudados estavam distribuídos de modo aleatório entreos 6 distintos perfis eletroforéticos obtidos através da Eletroforese em Gel de Campo Pulsado (PFGE).

Ecosystem architecture design: endogenous and exogenous structural properties

The aim of this dissertation is to bridge and synthesize the different streams of literature addressing ecosystem architecture through a multiple‐lens perspective. In addition, the structural properties of and processes to design and manage the architecture will be examined. With this approach, the oft‐neglected actor‐structure duality is addressed and both the position and structure, and action and process are under scrutiny. Further, the developed framework and empirical evidence offer valuable insights on how firms collectively create value and individually appropriate value. The dissertation is divided into two parts. The first part comprises a literature review, as well as the conclusions of the whole study, and the second part includes six research publications. The dissertation is based on three different reasoning logics: abduction, induction and deduction; related qualitative and quantitative methodologies are utilized in the empirical examination of the phenomenon in the information and communication technology industry. The results suggest firstly that there are endogenous and exogenous structural properties of the ecosystem architecture. Out of these, the former ones can be more easily influenced by a particular actor whereas the latter ones are taken more or less for granted. Secondly, the exogenous ecosystem design properties influence the value creation potential of the ecosystem whereas the endogenous ecosystem design properties influence the value appropriation potential of a particular actor in the ecosystem. Thirdly, the study suggests that there is a relationship between endogenous and exogenous structural properties in that the endogenous properties can be leveraged to create and reconfigure the exogenous properties whereas the exogenous properties prose opportunities and restrictions on the use of endogenous properties. In addition, the study suggests that there are different emergent and engineered processes to design and manage ecosystem architecture and to influence both the endogenous and exogenous structural properties of ecosystem architecture. This study makes three main contributions. First, on the conceptual level, it brings coherence and direction to the fast growing body of literature on novel inter‐organizational arrangements, such as ecosystems. It does this by bridging and synthetizing three different streams of literature, namely the boundary, design and orchestration conception. Secondly, it sets out a framework that enhances our understanding of the structural properties of ecosystem architecture; of the processes to design and manage ecosystem architecture; and of their influence on the value creation potential of the ecosystem and the value capture potential of a particular firm. Thirdly, it offers empirical evidence of the structural properties and processes.

A cyber security architecture for military networks using a cognitive network approach

Cyber security is one of the main topics that are discussed around the world today. The threat is real, and it is unlikely to diminish. People, business, governments, and even armed forces are networked in a way or another. Thus, the cyber threat is also facing military networking. On the other hand, the concept of Network Centric Warfare sets high requirements for military tactical data communications and security. A challenging networking environment and cyber threats force us to consider new approaches to build security on the military communication systems. The purpose of this thesis is to develop a cyber security architecture for military networks, and to evaluate the designed architecture. The architecture is described as a technical functionality. As a new approach, the thesis introduces Cognitive Networks (CN) which are a theoretical concept to build more intelligent, dynamic and even secure communication networks. The cognitive networks are capable of observe the networking environment, make decisions for optimal performance and adapt its system parameter according to the decisions. As a result, the thesis presents a five-layer cyber security architecture that consists of security elements controlled by a cognitive process. The proposed architecture includes the infrastructure, services and application layers that are managed and controlled by the cognitive and management layers. The architecture defines the tasks of the security elements at a functional level without introducing any new protocols or algorithms. For evaluating two separated method were used. The first method is based on the SABSA framework that uses a layered approach to analyze overall security of an organization. The second method was a scenario based method in which a risk severity level is calculated. The evaluation results show that the proposed architecture fulfills the security requirements at least at a high level. However, the evaluation of the proposed architecture proved to be very challenging. Thus, the evaluation results must be considered very critically. The thesis proves the cognitive networks are a promising approach, and they provide lots of benefits when designing a cyber security architecture for the tactical military networks. However, many implementation problems exist, and several details must be considered and studied during the future work.

Analysis of open CNC architecture for machine tools

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.