On the selective removal of steel by laser-assisted vortex machining

Of all laser-based processes, laser machining has received little attention compared with others such as cutting, welding, heat treatment and cleaning. The reasons for this are unclear, although much can be gained from the development of an effcient laser machining process capable of processing diffcult materials such as high-performance steels and aerospace alloys. Existing laser machining processes selectively remove material by melt shearing and evaporation. Removing material by melting and evaporation leads to very low wall plug effciencies, and the process has difficulty competing with conventional mechanical removal methods. Adopting a laser machining solution for some materials offers the best prospects of effcient manufacturing operations. This paper presents a new laser machining process that relies on melt shear removal provided by a vertical high-speed gas vortex. Experimental and theoretical studies of a simple machining geometry have identifed a stable vortex regime that can be used to remove laser-generated melt effectively. The resultant combination of laser and vortex is employed in machining trials on 43A carbon steel. Results have shown that laser slot machining can be performed in a stable regime at speeds up to 150mm/min with slot depths of 4mm at an incident CO2 laser power level of 600 W. Slot forming mechanisms and process variables are discussed for the case of steel. Methods of bulk machining through multislot machining strategies are also presented.

Heat-stress and light-stress induce different cellular pathologies in the symbiotic dinoflagellate during coral bleaching

Coral bleaching is a significant contributor to the worldwide degradation of coral reefs and is indicative of the termination of symbiosis between the coral host and its symbiotic algae (dinoflagellate; Symbiodinium sp. complex), usually by expulsion or xenophagy (symbiophagy) of its dinoflagellates. Herein, we provide evidence that during the earliest stages of environmentally induced bleaching, heat stress and light stress generate distinctly different pathomorphological changes in the chloroplasts, while a combined heat- and light-stress exposure induces both pathomorphologies; suggesting that these stressors act on the dinoflagellate by different mechanisms. Within the first 48 hours of a heat stress (32°C) under low-light conditions, heat stress induced decomposition of thylakoid structures before observation of extensive oxidative damage; thus it is the disorganization of the thylakoids that creates the conditions allowing photo-oxidative-stress. Conversely, during the first 48 hours of a light stress (2007 µmoles m−2 s−1 PAR) at 25°C, condensation or fusion of multiple thylakoid lamellae occurred coincidently with levels of oxidative damage products, implying that photo-oxidative stress causes the structural membrane damage within the chloroplasts. Exposure to combined heat- and light-stresses induced both pathomorphologies, confirming that these stressors acted on the dinoflagellate via different mechanisms. Within 72 hours of exposure to heat and/or light stresses, homeostatic processes (e.g., heat-shock protein and anti-oxidant enzyme response) were evident in the remaining intact dinoflagellates, regardless of the initiating stressor. Understanding the sequence of events during bleaching when triggered by different environmental stressors is important for predicting both severity and consequences of coral bleaching

Investigation on sanitational aspects (microbiological) of prawn processing factories

Absence of regular cleaning has been found to result in heavy bacterial loads on the surfaces of utensils and other equipment used in prawn processing factories and peeling centers. Instance of high faecal contamination is also sometimes met with. Detailed investigations have shown that a cleaning schedule comprising of treatment of these surface with a detergent followed by application of an effective disinfectant like sodium hypochlorite would prevent such bacterial build up.

A survey of the quality of salt cured fish produced in the Kanyakumari Disrict [i.e. District], Madras State

A survey of the quality of salt cured fish in Kanyakumari District, Madras State was done during the years 1963 and 1964 to obtain necessary basic information to formulate quality standards for these products which are gaining importance in the export trade. 155 trade samples of sun-dried, dry-salted, wet-cured and pit-cured fishery products were examined for their chemical quality and organoleptic characteristics. 26.5% of the sun-dried products, 25% of the wet cured fish, 55.21% of the dried salted products and none of the pit cured samples were found to be good in quality. The sun dried products were generally found to have heavy admixture of sand and were inadequately dried. The chief defects in the salt cured fish products were found to be the use of spoiled fish, imperfect cleaning and washing, use of impure salt, inadequate salting, curing and drying, and unhygienic conditions in all stages. Quality standards must be formulated for each variety of salt cured fish product and adequate measures taken to rectify the defects and enforce the quality standards.

Small scale manufacture of crude agar from Gracilaria seaweeds

A simplified process was worked out to prepare crude agar from red seaweeds (Gracilaria sp.). The process required careful preliminary cleaning and bleaching (sun-drying) of the weed. The agar was extracted by boiling with water in a mixture (2%) strong enough to set as a jelly. Freezing the jelly over a 3—day period in an ice-making machine, adjusted to work slowly, separated out ice and agar. The blocks were thawed out and the agar dried in the sun. The efficiency of extraction was over 800/A.

Survey on the quality of Jaadi available [in] Sri Lankan market

A quality of survey was conducted at the fish curing yards in a northwest coast and the southern coast in Sri Lanka. A total of 40 samples different varieties of fishes were collected from the market and jaadi curing yards and all were evaluated for the quality, fungal and insect infestation. Samples were analyzed for proximate composition chemical, microbiological and sensory quality. Thirty percent of the total analyzed samples of fish were found to be unfit for consumption. Samples collected from Negombo were found to the infected with maggots. Only 42% samples had dry matter above 50%. All the samples showed a protein content above 20%. The highest protein content was 27.92% in hurulla. Over 90% of the samples had TVN at acceptable quality limits (>40). The TBC for 33% of the samples were in the range 104-105/g range, while 48% were in the range of 107-108/g due to contamination of maggots and fungi. The Survey showed jaadi had a high level of protein in its composition. But defects of curing process such on imperfect cleaning inadequate salting resulted in low (Chemical and microbiological) quality of the product.

Paper re-use: Toner-print removal by laser ablation

This article explores the possibility of using a laser to remove toner-print from office paper. Removal of print would allow paper to be re-used instead of being recycled or disposed into a landfill. This might reduce climate change gas emissions per tonne of office paper by between 45% and 95%. Although there is little previous research on the area, a number of related articles on paper conservation methods using laser radiation can be found in literature. Different authors have studied the effects of laser energy on blank paper and its application for cleaning soiled paper. However, this study examines toner-print removal from paper by laser ablation. In this article a laser in the visible range is applied to a single toner-paper combination with a range of energy fluences. Results are evaluated by means of colour measurements under the L*a*b* colour space and SEM images. Analysis of the samples reveals that there are parameters under which it is possible to remove toner from paper without causing significant discolouration or damage to the substrate. This means that it is technically possible to remove toner-print for paper re-use.

A proforma for assessment of the levels of sanitation in fish processing establishments

Over the past 15 years of its development, the fish processing industry in India has shown considerable improvement in maintenance of hygiene during handling of the raw material, processing and marketing of the finished product. This is best manifested in the lowering of upper limits of bacterial loads in factory environs and in processed products (Pillai, 1971). More care and attention is given by the processors in recent years in the scientific cleaning and sanitizing of utensils and equipment, chlorination of water supplies and personnel hygiene. An example of sanitation score form is given to help scientists and technologists to evaluate the hygienic status of the processing units.

Quality of cured fishery products from Malabar and Kanara coasts

Results of chemical, bacteriological and organoleptic quality studies of cured fishery products of commerce collected from six major fish curing centres on the west coast of India are presented. 77.12% of the samples had moisture above 35%, 97.18% showed salt content below 25% and all samples had acid insoluble ash above 1.5%. 42.32% gave standard plate counts above 10,000 and 45.77% were contaminated with 'Red' halophiles. The major defects in curing were imperfect cleaning, inadequate salting and unhygienic conditions of processing.

Feeding habits of the sesarmid crab Perisesarma bidens (De Haan) in the mangroves of the Ryukyu Islands, Japan

Feeding habits of the sesarmid crab Perisesarma bidens (De Haan) was investigated in the mangroves of the Ryukyu Islands, Japan. Stomach content analysis showed that their diet consists mainly of mangrove leaves fragments, with small amounts of animal, algae and sediment matters, indicating that P. bidens is primarily detritivorous. The consumption rate of P. bidens was investigated under laboratory conditions by offering three different types of Kandelia candel mangrove leaves. Crab survived by eating green, yellow or brown leaves, preferring brown to either green or yellow leaves. Consumption rate of brown leaves was significantly higher when crabs were provided with green, yellow and brown leaves together, than when provided separately. It is considered that the brown leaves have a soft tissue, which is easily torn by the crab chelae and have apparently low C/N ratio. The C/N ratio of faeces, which indicated lower value than that of burrow leaves or sediments, derived from the symbiosis of bacteria in the stomach. The C/N ratio showed that sediments had C/N ratios 2/3 times lower than leaves sequestered in the burrow, indicating that mangrove sediments could have higher nutritional value than mangrove leaves. Perisesarma bidens showed significant consumption rates of mangrove detritus, therefore, it may have the important role as the grazer of mangrove detritus in view of the nutrient cycle in the mangroves.

Occurrence of particle debris field during focused Ga ion beam milling of glassy carbon

To explore the machining characteristics of glassy carbon by focused ion beam (FIB), particles induced by FIB milling on glassy carbon have been studied in the current work. Nano-sized particles in the range of tens of nanometers up to 400 nm can often be found around the area subject to FIB milling. Two ion beam scanning modes - slow single scan and fast repetitive scan - have been tested. Fewer particles are found in single patterns milled in fast repetitive scan mode. For a group of test patterns milled in a sequence, it was found that a greater number of particles were deposited around sites machined early in the sequence. In situ EDX analysis of the particles showed that they were composed of C and Ga. The formation of particles is related to the debris generated at the surrounding areas, the low melting point of gallium used as FIB ion source and the high contact angle of gallium on glassy carbon induces de-wetting of Ga and the subsequent formation of Ga particles. Ultrasonic cleaning can remove over 98% of visible particles. The surface roughness (Ra) of FIB milled areas after cleaning is less than 2 nm. © 2010.

The co-evolutionary relationship between bitterling fishes and freshwater mussels: insights from interspecific comparisons

Hypothesis: In parasites that use hosts for offspring development, adults may base oviposition decisions on a range of host traits related either to host quality or the co-evolutionary relationship between parasite and host. We examined whether host quality or co-evolutionary dynamics drive the use of hosts in the bitterling-mussel relationship. Organisms: Six species of bitterling fish (Acheilognathinae) and eight species of freshwater mussels (Unionidae, Corbiculidae) that are used by bitterling for oviposition. Site of experiments: Experimental tanks in Wuhan, China, at the site of the natural distribution of the studied species. Methods: Three experiments that controlled for host accessibility and interspecific interactions were conducted to identify host preferences among bitterling fishes and their mussel hosts. We started with a broad interspecific comparison. We then tested bitterling behavioural choices, their temporal stability, and mussel host ejection behaviour of the eggs of generalist and specialist bitterling species. Finally, we measured host mussel quality based on respiration rate and used published studies on mussel gill structure to infer mussel suitability as hosts for bitterling eggs. Results: We found significant interspecific differences among bitterling species in their use of mussel hosts. Bitterling species varied in their level of host specificity and identity of preferred hosts. Host preferences were flexible even among apparently specialized species and fishes switched their preferences adaptively when the quality of individuals of preferred host species declined. Mussels varied considerably in their response to oviposition through egg ejections. Host preference by a generalist bitterling species correlated positively with host quality measured as the efficiency of the mussel gills to extract oxygen from inhaled water. Host ability to eject bitterling eggs correlated positively with their relative respiration rate, probably due to a higher velocity of water circulating in the mussel gill chamber.

SLP: A zero-contact non-invasive method for pulmonary function testing

Structured Light Plethysmography (SLP) is a novel non-invasive method that uses structured light to perform pulmonary function testing that does not require physical contact with a patient. The technique produces an estimate of chest wall volume changes over time. A patient is observed continuously by two cameras and a known pattern of light (i.e. structured light) is projected onto the chest using an off-the-shelf projector. Corner features from the projected light pattern are extracted, tracked and brought into correspondence for both camera views over successive frames. A novel self calibration algorithm recovers the intrinsic and extrinsic camera parameters from these point correspondences. This information is used to reconstruct a surface approximation of the chest wall and several novel ideas for 'cleaning up' the reconstruction are used. The resulting volume and derived statistics (e.g. FVC, FEV) agree very well with data taken with a spirometer. © 2010. The copyright of this document resides with its authors.

A screening study on persistent bioaccumulation toxins (PBT) in fuel combustion soot

Persistent bioaccumulative toxins (PBTs) are organic substances that are persistent, bioaccumulative and can cause severe toxic effects (e.g. potential oncogens, mutagenic, endocrine disrupters) to human health or environment which are the ones that need special attention. PBT chemicals could be released to the environment from several types of sources and are ubiquitous in environment. However, fast and efficiency monitoring and assessment methods to investigate PBTs in environment are still lacking. In this study, a cleaning-up procedure of analyzing PBTs in fuels combustion soot was developed and its performance was assessed through comparing the chromatograms of crude extracts with their cleaned extracts after the cleaning-up procedure. The results showed that polycyclic aromatic compounds (PACs) were the main components in fuel combustion soot and the clean-up procedure developed in this paper can be well used as the method of analyzing PBTs in fuels combustion soot.

Heavy metals in plants and phytoremediation - A state-of-the-art report with special reference to literature published in Chinese journals

Goal, Scope and Background. In some cases, soil, water and food are heavily polluted by heavy metals in China. To use plants to remediate heavy metal pollution would be an effective technique in pollution control. The accumulation of heavy metals in plants and the role of plants in removing pollutants should be understood in order to implement phytoremediation, which makes use of plants to extract, transfer and stabilize heavy metals from soil and water. Methods. The information has been compiled from Chinese publications stemming mostly from the last decade, to show the research results on heavy metals in plants and the role of plants in controlling heavy metal pollution, and to provide a general outlook of phytoremediation in China. Related references from scientific journals and university journals are searched and summarized in sections concerning the accumulation of heavy metals in plants, plants for heavy metal purification and phytoremediation techniques. Results and Discussion. Plants can take up heavy metals by their roots, or even via their stems and leaves, and accumulate them in their organs. Plants take up elements selectively. Accumulation and distribution of heavy metals in the plant depends on the plant species, element species, chemical and bioavailiability, redox, pH, cation exchange capacity, dissolved oxygen, temperature and secretion of roots. Plants are employed in the decontamination of heavy metals from polluted water and have demonstrated high performances in treating mineral tailing water and industrial effluents. The purification capacity of heavy metals by plants are affected by several factors, such as the concentration of the heavy metals, species of elements, plant species, exposure duration, temperature and pH. Conclusions. Phytoremediation, which makes use of vegetation to remove, detoxify, or stabilize persistent pollutants, is a green and environmentally-friendly tool for cleaning polluted soil and water. The advantage of high biomass productive and easy disposal makes plants most useful to remediate heavy metals on site. Recommendations and Outlook. Based on knowledge of the heavy metal accumulation in plants, it is possible to select those species of crops and pasturage herbs, which accumulate fewer heavy metals, for food cultivation and fodder for animals; and to select those hyperaccumulation species for extracting heavy metals from soil and water. Studies on the mechanisms and application of hyperaccumulation are necessary in China for developing phytoremediation.