Passive vibration isolation using axially loaded curved beams

A nonlinear spring element of a vibration isolator should ideally possess high static and low dynamic stiffness. A buckled beam may be a good candidate to fulfil this requirement provided its internal resonance frequencies are high enough to achieve a wide frequency range of isolation. If a straight beam is used, there is a singularity in the force-displacement characteristic. To smooth this characteristic and eliminate the singularity at the buckling point, beams with initial constant curvature along their length are investigated here as an alternative to the buckled straight beam. Their force displacement characteristics are compared with different initial curvature and with a straight buckled beam. The minimum achievable dynamic stiffness with its corresponding static stiffness is compared for different initial curvatures. A case study is considered where the beams are optimized to isolate a one kilogram mass and to achieve a natural frequency of 1 Hz, considering small amplitudes of vibration. Resonance frequencies of the optimized beams for different curvature are presented. It is shown that an order of magnitude reduction in stiffness compared with a linear spring is achievable, while the internal resonance frequencies of the curved beam are high enough to achieve an acceptable frequency range of isolation.

Performance of race instrumentation system in curved root canals: a comprehensive analysis by three study methods

In this study, curved maxillary molar root canals were instrumented with RaCe rotary system to evaluate: 1. the occurrence of canal transportation using a radiographic platform; 2. the action of the instruments on the dentin walls, centering ability and canal enlargement by analysis of digital images; and the percentage of regular dentin surfaces and debris within the canal by histological analysis. Ten mesiobuccal roots of extracted human maxillary molars were embedded in acrylic resin and sectioned at the middle and apical thirds. Root canal shaping was performed using the RaCe rotary system at 250 rpm and 1 Ncm torque. Each instrument set was used five times according to a crowndown technique in the following sequence: 40/0.10, 35/0.08, 25/0.06, 25/0.04, 25/0.02 (working length - WL), 30/0.02 (WL) and 35/0.02 (WL). Each instrument was inserted until resistance was felt and then pulled back, followed by brushing movements towards all canal walls. Each specimen was assessed by three study methods: radiographic platform, digitized image assessment and histological analysis. The radiographic platform showed lack of apical transportation. No statistically significant difference (Wilcoxon test, p>0.05) was found between the middle and apical thirds regarding instrument action on dentin walls, centering ability, area of root canal enlargement, percentage of regular dentin surfaces and debris within the root canal. It may be concluded that RaCe system is a suitable method for the preparation of curved root canals, regarding the maintenance of root canal original path, action on dentin walls, canal enlargement and removal of debris from the root canal lumen.

Setting boundaries: Environmental and spatial effects on Odonata larvae distribution (Insecta)

Características ambientais e distâncias espaciais entre os locais foram utilizadas para explicar a distribuição das espécies no ambiente, através das predições da teoria Neutra (espaço) e teoria do Nicho (ambiente). Foram avaliados os efeitos de fatores geográficos e ambientais sobre a distribuição de larvas de Odonata ao longo da Bacia do Rio Suiá-Missu, no estado de Mato Grosso. Nós testamos a hipótese de que (1) o ambiente é o principal fator de estruturação da comunidade devido às suas exigências ecofisiológicas; e (2) o padrão, se presente, é mais expressivo para Zygoptera. As amostras foram feitas em 12 locais na Bacia do Rio Suiá-Missu, em três campanhas (2007/2008), com um total de 1.382 larvas de Odonata, composta por 10 famílias, 51 gêneros e 100 morfoespécies. Os Anisoptera foram mais abundantes que Zygoptera, que compreende 81% de todas as amostras. O ambiente afetou Zygoptera (R = 0,291; p = 0,007) e foi o principal fator de estruturação da assembléia. Assim, a teoria do nicho foi confirmada. A ausência deste efeito sobre Anisoptera pode ser devido às adaptações ecofisiológicos que lhes permitem ocupar diferentes habitats. Larvas de Zygoptera são indicadores de mudanças na estrutura do habitat. Os efeitos das variáveis ambientais sobre a ecologia das larvas enfatizam a forte relação entre esses organismos e integridade ambiental.

Cyclic fatigue resistance of rotary niti instruments after simulated clinical use in curved root canals

O objetivo deste estudo foi avaliar a resistência à fadiga cíclica de instrumentos rotatórios de níquel-titânio após simulação de uso clinico em canais curvos (curvatura de 40° e raio de 5 mm). Trinta e seis instrumentos, calibre n° 25 conicidade 0,04, foram divididos em três grupos: o Grupo A com um ciclo de uso; Grupo B, três ciclos de uso e grupo C, cinco ciclos de uso. Um cronômetro digital aferiu em segundos o tempo até a fratura do instrumento que, posteriormente, foi convertido em número de ciclos para fratura. Os dados foram analisados por ANOVA e teste de Tukey (p<0,05). O grupo que utilizou o instrumento por cinco ciclos (grupo C) atingiu significativamente menores números de ciclos antes da fratura (média = 197,5 ciclos) quando comparado com os instrumentos utilizados em um ciclo (média = 309,2) e três ciclos (média = 287,5). Os resultados mostraram que o número de uso de instrumentos RaCe para modelar canais curvos afeta negativamente a resistência à fadiga cíclica dos instrumentos após cinco usos.

Quantum versus classical instability of scalar fields in curved backgrounds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simplified pure spinor b ghost in a curved heterotic superstring background

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Outlining precision boundaries among areas with different variability standards using magnetic susceptibility and geomorphic surfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrical Properties at Grain Boundaries Influenced by Cr3+ Diffusion in SnO2.ZnO.Nb2O5-Films Varistor Prepared by Electrophoresis Deposition

SnO2-based varistors are strong candidates to replace the ZnO-based varistors due to ordering fewer additives to improve its electrical behavior as well as by showing similar nonlinear characteristics of ZnO varistors. In this work, SnO2-nanoparticles based-varistors with addition of 1.0 %mol of ZnO and 0.05 %mol of Nb2O5 were synthesized by chemical route. SnO2.ZnO.Nb2O5-films with 5 μm of thickness were obtained by electrophoretic deposition (EPD) of the nanoparticles on Si/Pt substrate from alcoholic suspension of SnO2-based powder. The sintering step was carried out in a microwave oven at 1000 °C for 40 minutes. Then, Cr3+ ions were deposited on the films surface by EPD after the sintering step. Each sample was submitted to different thermal treatments to improve the varistor behavior by diffusion of ions in the samples. The films showed a nonlinear coefficient (α) greater than 9, breakdown voltage (VR) around 60 V, low leakage current (IF ≈ 10-6 A), height potential barrier above 0.5 eV and grain boundary resistivity upward of 107 Ω.cm.

Influence of the rotary and/or oscillatory reciprocating systems in the morphological changes of narrow and curved molar root canals anatomy

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

How population loss through habitat boundaries determines the dynamics of a predator-prey system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Free massive particles with total energy Ecurved spacetimes

We analyze free elementary particles with a rest mass m and total energy E

Hilbert space of curved βγ systems on quadric cones

We clarify the structure of the Hilbert space of curved βγ systems defined by a quadratic constraint. The constraint is studied using intrinsic and BRST methods, and their partition functions are shown to agree. The quantum BRST cohomology is non-empty only at ghost numbers 0 and 1, and there is a one-to-one mapping between these two sectors. In the intrinsic description, the ghost number 1 operators correspond to the ones that are not globally defined on the constrained surface. Extension of the results to the pure spinor superstring is discussed in a separate work.

Contesting Sphere Boundaries Online: Private/Technical/Public Discourses in Polycystic Ovarian Syndrome Discussion Groups

The internet is fast becoming a means for people to obtain information, creating a unique forum for the intersection of the public, technical, and private spheres. To ground my research theoretically, I used Jürgen Habermas’s sphere theory. Habermas (1987) explains that the technical sphere colonizes the private sphere, which decreases democratic potential. In particular, the internet is a place for altering technical colonization of the private and public spheres. My research focuses on women’s health because it is a particularly useful case study for examining sphere tensions. Historically, the biomedical health establishment has been a powerful agent of colonization, resulting in detrimental effects for women and their health. The purpose of this study is to examine how the internet encourages expert and female patient deliberation, which empowers women to challenge the experts and, thus, make conversations between the private/technical spheres more democratic. I used PCOS (Polycystic Ovarian Syndrome) as a case to observe the changing sphere boundaries by studying the discourse that took place on multiple patient and doctor websites over a four-year period. Through my research, I found that the PCOS women challenge the biomedical model by appropriating medical language. By understanding the medical talk, the women are able to feel confident when discussing their health conditions with the doctor and with each other. The PCOS women also become lay-experts who have personal and medical experience with PCOS, reducing private sphere colonization. This case study exemplifies how female empowerment can influence expert culture, challenging our conventional understanding of democracy.

Amerindian anthropology and cultural psychology: Crossing boundaries and meeting otherness` worlds

Addressing integrative possibilities between psychology and anthropology, this paper aims to design conceptual linkages between semiotic-cultural constructivist psychology and the anthropological theory of Amerindian perspectivism. From the psychological view, it is the interdependence between the structural and processual dimensions of the personal culture that makes parallels with Amerindian perspectivism fruitful. This anthropological frame proposes an experiment with native conceptions, which I argue similar to what Baldwin (1906) called sembling. Hence, it can be considered an active imitation of otherness` viewpoint in order to approach indigenous worlds. It is supposed that this procedure leads to the emergence of new symbolic elements configuring the cultural action field of each agency in interaction. It is proposed that ""making-believe`` the Amerindian is convergent with the dialogic-hermeneutic approach of semiotic-cultural constructivism. As a result of the present integrative effort, is designed a meta-model that multiplies the genetic process of concrete symbolic objects.

Assessing apical transportation in curved canals: comparison between cross-sections and micro-computed tomography

The aim of this study was to compare two methods of assessing apical transportation in curved canals after rotary instrumentation, namely, cross-sections and micro-computed tomography (mu CT). Thirty mandibular molars were divided into two groups and prepared according to the requirements of each method. In G1 (cross-sections), teeth were embedded in resin blocks and sectioned at 2.0, 3.5, and 5.0 mm from the anatomic apex. Pre- and postoperative sections were photographed and analyzed. In G2 (mu CT), teeth were embedded in a rubber-base impression material and scanned before and after instrumentation. Mesiobuccal canals were instrumented with the Twisted File (TF) system (SybronEndo, Orange, USA), and mesiolingual canals, with the Endo Sequence (ES) system (Brasseler, Savannah, USA). Images were reconstructed, and sections corresponding to distances 2.0, 3.5, and 5.0 mm from the anatomic apex were selected for comparison. Data were analyzed using Mann-Whitney's test at a 5% significance level. The TF and ES instruments produced little deviation from the root canal center, with no statistical difference between them (P > 0.05). The canal transportation results were significantly lower (0.056 mm) in G2 than in G1 (0.089 mm) (p = 0.0012). The mu CT method was superior to the cross-section method, especially in view of its ability to preserve specimens and provide results that are more closely related to clinical situations.