USO DA EQUAÇÃO DE ESTADO DE PENG-ROBINSON COM REGRA DE MISTURA DEPENDENTE DA COMPOSIÇÃO NA PREDIÇÃO DO EQUILÍBRIO DE FASES DO SISTEMA TERNÁRIO CO2-LIMONENO-CITRAL

Dados de equilíbrio de fases a pressões elevadas dos sistemas binários CO2-Limoneno e CO2-Citral e do sistema ternário CO2-Limoneno-Citral foram coletados da literatura e usados na modelagem termodinâmica que emprega a equação de estado de PENG-ROBINSON [1] com: 1) Regra de mistura clássica; 2) Regra de mistura dependente da composição de STRYJEK & VERA [2]. Os parâmetros de interação binária entre CO2-Limoneno e CO2-Citral foram obtidos pelo ajuste dos modelos a dados experimentais, fazendo uso de dois programas computacionais, os quais envolvem a minimização de uma função objetivo, pelo método Simplex de NELDER & MEAD (3), que foi escrita em termos dos desvios relativos entre os pontos experimentais e os calculados pelos modelos. O equilíbrio de fases do sistema ternário foi calculado utilizando-se os parâmetros de interação binária ajustados previamente e considerando parâmetros nulos entre os componentes Limoneno e Citral. A análise dos resultados indica, para as condições supercríticas, que os dois modelos foram capazes de predizer qualitativamente o sistema ternário, fornecendo resultados compatíveis, em ordem de grandeza, com os valores experimentais.

Desarrollo de la ingenieria basica de una planta industrial para extraccion con CO2 liquido. I. Extractores

En base a los resultados obtenidos en una unidad piloto cuyo diseño, montaje y puesta en operación fueron realizados con la finalidad de poder producir el cambio de escala, se dio inicio al proyecto de una planta de producción con características modulares por su flexibilidad operativa en cuanto a capacidad de producción y tipo de materia prima. Se desarrolló la ingeniería conceptual, consistente en la definición de las bases de diseño; las diferentes etapas del proceso, la capacidad de producción a instalar, los rangos de trabajo de las variables operativas, el régimen, la especificación de los materiales de construcción, características de la carga, materiales auxiliares y tipo de instrumentación y control. La ingeniería básica, especificación de equipos y componentes auxiliares, para: alimentación de CO2, bombeo y presurización, acondicionamiento térmico, extracción, separación fluido/extracto, medida y control del caudal, temperatura y presión, se encuentra en una etapa avanzada de ejecución. Se ha comenzado con la ingeniería de detalle de extractores con diferente capacidad.

Efeito da adição de CO2 sobre o crescimento microbiano em macarrão tipo massa fresca

O presente trabalho foi desenvolvido com o objetivo de avaliar o efeito da adição de CO2 sobre a qualidade do macarrão tipo massa fresca. O uso de atmosfera modificada no interior da embalagem, com concentrações mais elevadas de CO2, tem sido empregado comercialmente com a finalidade de inibir microrganismos, principalmente os aeróbios. Dessa forma, neste trabalho foi empregada uma nova técnica para a adição do CO2 no produto. Esta técnica consistiu em carbonatar a água que foi utilizada para a produção do macarrão tipo massa fresca, em substituição à injeção do gás CO2 na embalagem. Foram testadas as concentrações de 160 e 745mg/L de CO2. Os resultados mostraram, pelas análises microbiológicas, que o nível de 745mg/L de CO2 foi satisfatório para a inibição de bolores e leveduras durante os 50 dias de armazenamento a 7±1ºC. No entanto, não houve efeito na inibição de psicrotróficos e coliformes totais.

Redução do teor de limoneno e bergapteno do óleo essencial de bergamota adsorvido em sílica gel pelo CO2 - supercrítico

Testou-se a utilização do CO2 supercrítico na extração seletiva de compostos oxigenados (linalol e acetato de linalila) contidos no óleo essencial de bergamota (Citrus bergamia Risso), var. bergamia, adsorvido em sílica gel contendo baixo teor de limoneno e bergapteno. A densidade do dióxido de carbono e a temperatura de extração foram otimizadas, e os extratos obtidos foram analisados por cromatografia. Nas condições estudadas, observou-se uma redução de 72% no teor de limoneno e 92,5% para o bergapteno, sendo extraídos 52% de linalol e 69,4% de acetato de linalila.

Avaliação de diferentes híbridos suínos submetidos à insensibilização elétrica e gasosa (CO2): parte 2 - mensurações objetivas de qualidade

Suínos provenientes de três linhagens genética (A, B e C) comercializados no Brasil, com peso vivo de 100 a 120 kg foram submetidos ao insensibilizador elétrico manual (Karl Schermer 220-230/250 volts, 45-60 Hz e 1,4-1,5A) e ao gasoso coletivo (Combi-Butina 90% CO2) no mesmo abatedouro. O sistema gasoso proporcionou aos híbridos valores (b*) superiores (p<0,001) quando comparados ao sistema elétrico, assim como diferenças nos valores médios de refletância luminosa interna (Hennessy-gp4) aos 45 min. pm e 24ª h pm (p<0,05). Quando submetidos ao sistema gasoso, diferenças entre os híbridos nos valores médios de luminosidade superficial (L) 24ª h pm (p<0,0001), pH 24ª h pm (SM) (p<0,0001), valores (b*) 24ª h pm (p<0,05), reflectância luminosa interna aos 45 min e 24ª h (LD) (p<0,001) foram observadas. Utilizando-se o sistema manual elétrico verificaram-se diferenças significativas nos valores médios de refletância luminosa interna (LD) aos 45 min. e 24ª h pm (p<0,001), assim como nos valores médios de pH 24ª h pm (SM) e (SC) (p<0,05). Entretanto as diferenças obtidas entre os sistemas de insensibilização e híbridos estudados não foram suficientes para proporcionar diferenças significativas nos valores de capacidade de retenção de água, perda por exsudação e "umidade exprimível".

Avaliação de diferentes híbridos suínos submetidos à insensibilização elétrica e gasosa (CO2). Parte 3: mensurações visuais de qualidade

Três linhagens genética suína A, B e C comercializadas no Brasil, foram submetidas ao insensibilizador elétrico manual (Karl Schermer 220-230/250 volts, 45-60 Hz e 1,4 - 1,5 A) e ao sistema gasoso coletivo (COMBI-BUTINA 90% CO2) . A insensibilização elétrica proporcionou níveis mais elevados de salpicamento nas regiões do coxão mole (0,477 e 0,26, p < 0,01), paleta/cranial (0,154 e 0,039, p < 0,05), paleta/central (0,261 e 0,052, p < 0,001), paleta/caudal (0,180 e 0,030, p < 0,01), lombo/central (0,185 e 0,065, p < 0,01), lombo/caudal (0,06 e 0,207, p < 0,01) e lombo/lateral externa (0,061 e 0,013, p < 0,05), assim como salpicamento mais difuso nas regiões do coxão-mole (0,461 e 0,279, p < 0,05), paleta/cranial (0,154 e 0,039, p < 0,01), paleta/central (0,231 e 0,039, p < 0,001) e paleta/caudal (0,185 e 0,026, p < 0,001). O sistema elétrico também proporcionou maiores índices de escoriações da pele nas regiões da paleta (1,098 e 0,795, p < 0,001), corpo (1,04 e 0,948, p < 0,05) e pernil (0,84 e 0,68, p < 0,001), assim como elevados índices de reflexo palpebral (11,57%) comparativamente ao gasoso (2,86%), de um total de 426 suínos. Pequenos índices de fraturas ósseas e contusões musculares em animais de ambos os sistemas foram observados.

Avaliação de diferentes híbridos suínos submetidos à insensibilização elétrica e gasosa (CO2). Parte 1: mensuração de indicadores sanguíneos de estresse

Suínos provenientes de três linhagens genéticas A, B e C comercializadas no Brasil, com peso vivo de 100 a 120 kg foram submetidos ao insensibilizador elétrico manual (Karl Schermer 220-230/250 volts, 45-60 Hz e 1,4 -1,5 A) e ao sistema gasoso coletivo (COMBI-BUTINA 90% CO2). Alíquotas sanguíneas, para determinação dos níveis de creatina fosfoquinase (CPK), lactato e cortisol, assim como amostras do músculo semimembranosus (10 g) para a determinação do gene halotano, foram coletadas. Comparando-se os sistemas de insensibilização elétrico e gasoso (CO2), o elétrico demonstrou ser mais estressante, proporcionando maiores concentrações plasmáticas de cortisol (p < 0,001) e lactato (p < 0,001) para as linhagens genéticas A e C, nas condições estudadas, porém não se observou diferenças significativas para os indicadores sanguíneos e sistemas de insensibilização em questão quando a linhagem B foi considerada. Diferenças significativas entre as linhagens genéticas A, B e C foram obtidas comparando-se os valores plasmáticos de creatina fosfoquinase (p < 0,001), lactato (p < 0,001) e cortisol (p < 0,001) quando atordoados com o sistema gasoso, entretanto, quando o sistema elétrico foi utilizado, somente os valores de cortisol apresentaram diferenças significativas (p < 0,001). A presença do gene halotano (Nn) foi observada somente na linhagem B.

Evaluation of thermotolerant capacity of lactic acid bacteria isolated from commercial sausages and the effects of their addition on the quality of cooked sausages

The thermotolerant capacity of several lactic acid bacteria strains isolated from cooked commercial sausages was determined. Four strains were positively identified as Lactobacillus plantarum, Lactobacillus curvatus, Pediococcus pentosaceus and Pediococcus acidilacti, after surviving thermal treatment (70 °C during 60 minutes). Thermotolerant strains were inoculated in sausage batters before cooking in order to determine their effect on color, texture, acceptance and inhibition of Enterobacteria during 12 days at 8 °C. No significant effect of the inoculated strains was detected on color parameters. Textural profile parameters, cohesiveness and resilience, were not affected by the inoculation of thermotolerant lactic acid bacteria, but L. curvatus sausages resulted softer than the rest of the treatments. Samples inoculated with L. curvatus also obtained the lowest scores for the sensory attributes evaluated, with the remaining treatments causing no unfavorable effects on sausage acceptance. There was a reduction in enterobacterial counts after 12 days of cold storage in inoculated samples. The performance of inoculated lactic acid bacteria strains can be explained in a similar way as that of starter cultures in dry-fermented sausages, where the growth in nests impairs other pathogenic microorganisms present in the rest of the sausage, since environmental conditions and the early inoculation of these thermotolerant strains favor them to become the dominant flora.

Sensory evaluation of black instant coffee beverage with some volatile compounds present in aromatic oil from roasted coffee

The oil obtained from Brazilian roasted coffee by supercritical CO2 extraction shows considerable aromatic properties, mainly composed by five aromatic compounds, 2-methylpyrazine; 2-furfurylalcohol, 2,5-dimethylpyrazine; γ-butyrolactone and 2-furfurylacetate. Sensory analyses were used to verify the influence of a mixture of these important classes of aromatic coffee compounds (pyrazines, furans and lactones) and of the roasted coffee aromatic oil on the coffee aroma and flavour of black instant freeze and spray-dried coffee beverages. In the acceptance evaluation of the aroma, the samples prepared with freeze-dried instant coffee without the mixture of volatile compounds (sample 4) were not significantly different from the freeze-dried instant coffee in which the aromatic coffee oil was added (sample 5) and from the sample prepared with freeze-dried coffee in which the mixture of the five volatile was added (sample 3), coincidentally from the same drying process. Therefore, sample (3) did not differ from samples prepared with spray dried instant coffee without (sample 1) and to which (sample 2) the mixture of volatile was added. Therefore, with respect to this attribute, the addition of this mixture did not interfere in this drink acceptance. Taking into consideration the flavor, samples prepared with freeze-dried instant coffee in which the aromatic coffee oil was added (5) and the samples with (3) and without (4) the mixture of the five volatile was added did not differ significantly, however sample (4) did not differ from samples (1) and (2). Regarding this attribute, the addition of the aromatic oil of roasted coffee or a mixture of volatile in samples of freeze-dried instant coffee had a better acceptance than those dried by spray dryer (1) and (2). Thus, the enrichment of drinks with the aromatic oil of roasted coffee, or even with the mixture of the five components did not influence the consumer acceptance with respect to the aroma, but exerts influence with respect to flavour.

Influence of chitosan addition on quality properties of vacuum-packaged pork sausages

The aim of the study was to evaluate the influence of the chitosan addition on the quality of vacuum packaged pork sausages. A variant of the product was elaborated with 1% (w/w) of chitosan in lactic acid solution at 1% (v/v) and it was compared to a control. Sausages were mechanically stuffed and manually conformed and vacuum packaged. Sausages were stored at 4 °C and microbiological evaluations, pH measurements, texture profile analysis and sensorial evaluation were performed. The chitosan addition in the formulation of the sausages did not reduce the microbiological counts. The pH values obtained in all samples were similar, which suggests that the chitosan addition did not influence the pH values of sausages. The added chitosan did not affect significantly (p < 0.05) the results of the texture profile analysis and sensorial attributes and therefore, the overall acceptance of the sausages.

Pre-treatment of thermoduric spores in CO2 modified atmosphere and their survivability during food extrusion

The aim of this experiment was to evaluate how susceptible spores become to mechanical damage during food extrusion after being submitted to CO2. B. stearothermophilus spores sowed to corn and soy mix were submitted to 99% CO2 for 10 days and extruded in a single-screw extruder. The treatments were: T1 - spore-containing samples, extruded at screw rotational speed of 65 rpm and barrel wall temperature of 80 °C; T2 - as T1, except for screw rotational speed of 150 rpm; and T3 - as T2, except that samples were submitted to the modified atmosphere. The results for cell viability, minimum and maximum residence times, and static pressure were T1 - 19.90 ± 3.24%, 123.3 ± 14.50 seconds; 203.3 ± 14.05 seconds; 2.217 ± 62 kPa; T2 - 21.42 ± 8.24%, 70.00 ± 5.77 seconds; 170.00 ± 4.67 seconds; 2.310 ± 107 kPa; and T3 - 11.06 ± 2.46%, 86.00 ± 7.23 seconds; 186.00 ± 7.50 seconds; 2.403 ± 93 kPa, respectively. It was concluded that the extrusion process did reduce the cell count. However, screw rotational speed variation or CO2 pre-treatment did not affect cell viability.

Effect of addition of different hydrocolloids on pasting, thermal, and rheological properties of cassava starch

Starches and gums are hydrocolloids frequently used in food systems to provide proper texture, moisture, and water mobility. Starch-gum interaction in food systems can change the starch granule swelling and its gelatinization and rheological properties. In this study, the effect of the addition of xanthan gum (XG), sodium carboxymethyl cellulose (SCMC), and carrageenan (CAR) at the concentrations of the 0.15, 0.25, 0.35 and 0.45% (w/v) on the pasting, thermal, and rheological properties of cassava starch was studied. The swelling power (SP) and the scanning electron microscopy (SEM) of the starch gels were also evaluated. The results obtained showed that xanthan gum (XG) had a strong interaction with the cassava starch penetrating between starch granules causing increase in pasting viscosities, SP, storage and loss (G', and G", respectively) modulus and reduction in the setback of the starch; sodium carboxymethyl cellulose (SCMC) greatly increased the pasting viscosities, the SP, and the storage and loss (G', and G", respectively) modulus of the starch-mixtures, mainly due to its greater capacity to hold water and not due to the interaction with cassava starch. Carrageenan (CAR) did not change any of the starch properties since there was no interaction between this gum and cassava starch at the concentrations used.

Influence of xylanase addition on the characteristics of loaf bread prepared with white flour or whole grain wheat flour

The aim of this study was to verify the influence of the addition of the enzyme xylanase (four concentrations: 0, 4, 8, and 12 g.100 kg-1 flour) on the characteristics of loaf bread made with white wheat flour or whole grain wheat flour. Breads made from white flour and added with xylanase had higher specific volumes than those of the control sample (no enzyme); however, the specific volume did not differ significantly (p < 0.05) among the breads with different enzyme concentrations. All formulations made from whole grain wheat flour and added with xylanase also had specific volumes significantly higher than those of the control sample, and the highest value was found for the 8 g xylanase.100 kg-1 flour formulation. With respect to moisture content, the formulations with different enzyme concentrations showed small significant differences when compared to the control samples. In general, breads made with the addition of 8 g enzyme.100 kg-1 flour had the lowest firmness values, thus presenting the best technological characteristics.

Effect of starter culture and inulin addition on microbial viability, texture, and chemical characteristics of whole or skim milk Kefir

The effect of inulin addition and starters (Kefir grains or commercial starter culture) on the microbial viability, texture, and chemical characteristics of Kefir beverages prepared with whole or skim milk was evaluated during refrigerated storage. The type of starter did not influence microbial viability during the storage of the beverages, but the chemical and textural changes (decreases in pH, lactose concentration, and inulin and increased acidity, firmness, and syneresis) were more pronounced in the formulations fermented with grains than those fermented with the starter culture. The addition of inulin did not influence acidity or viability of lactic acid bacteria, but in general, its effect on the survival of acetic acid bacteria, Lactococcus and yeasts, firmness, and syneresis depended on the type of milk and starter culture used. Generally, the yeast, acetic acid bacteria, and Leuconostoc counts increased or remained unchanged, while the total population of lactic acid bacteria and Lactococcus were either reduced by 1 to 2 logs or remained unchanged during storage.

Colorimetric and sensory characteristics of fermented cured sausage with Brazilian ostrich meat addition

The aim of this study was to determine the colorimetric and sensory characteristics of a fermented cured sausage containing ostrich meat (Struthio camelus) and pork meat. Four treatments were performed: one with no ostrich meat (TC) and the others containing 19.08 (T1), 38.34 (T2), and 57.60% (T3) of ostrich meat and pork meat. Colorimetric analyses were measuring L*, a*, b*, C*, and hº. Sensory analysis was conducted assessing color, aroma, flavor, and texture at the end of the sausages' processing. The sausages containing ostrich meat were statistically different from the control in the instrumental colorimetric analysis. In the sensory analysis, no significant differences were observed between the treatments for aroma, flavor, and texture. However, significant differences were found in the color of the sausages due to the high myoglobin content present in the ostrich meat, which resulted in a very dark color in the treatment with the highest percentage of this type of meat.