Synthesis and toxicological evaluation of a chitosan‑L‑leucine conjugate for pulmonary drug delivery applications

Herein are reported the synthesis of a conjugate of chitosan with L-leucine, the preparation of nanoparticles from both chitosan and the conjugate for use in pulmonary drug delivery, and the in vitro evaluation of toxicity and inflammatory effects of both the polymers and their nanoparticles on the bronchial epithelial cell line, BEAS-2B. The nanoparticles, successfully prepared both from chitosan and the conjugate, had a diameter in the range of 10−30 nm. The polymers and their nanoparticles were tested for their effects on cell viability by MTT assay, on trans-epithelial permeability by using sodium fluorescein as a fluid phase marker, and on IL-8 secretion by ELISA. The conjugate nanoparticles had a low overall toxicity (IC50 = 2 mg/mL following 48 h exposure; no induction of IL-8 release at 0.5 mg/mL concentration), suggesting that they may be safe for pulmonary drug delivery applications.

A responsive sanction to promote systematic compliance? Enforceable undertakings in occupational health and safety regulation

This article examines the use of enforceable undertakings in Australian occupational health and safety (OHS) regulation. Enforceable undertakings are promises by persons alleged to have breached their regulatory obligations to do something, which if not done, is enforceable in court. Enforceable undertakings potentially have an important responsive and restorative role to play in a regulatory enforcement strategy to ensure compliance with OHS statutes, and have been used in other areas of business regulation, including trade practices, financial, prudential, consumer, civil aviation, environmental and communications and media regulation. The article then reports on a study of the operation of enforceable undertakings in Queensland to enforce compliance with OHS obligations. We conclude that this early experience of enforceable undertakings in Queensland provides useful guidance as to how the enforceable undertaking provisions might best be implemented elsewhere, and preliminary evidence of the complexities of their likely effectiveness in OHS regulation.

Accumulation of heme oxygenase-1 (HSP32) in Xenopus laevis A6 kidney epithelial cells treated with sodium arsenite, cadmium chloride or proteasomal inhibitors

The present study examined the effect of sodium arsenite, cadmium chloride, heat shock and the proteasomal inhibitors MG132, withaferin A and celastrol on heme oxygenase-1 (HO-1; also known as HSP32) accumulation in Xenopus laevis A6 kidney epithelial cells. Immunoblot analysis revealed that HO-1 accumulation was not induced by heat shock but was enhanced by sodium arsenite and cadmium chloride in a dose- and time-dependent fashion. Immunocytochemistry revealed that these metals induced HO-1 accumulation in a granular pattern primarily in the cytoplasm. Additionally, in 20% of the cells arsenite induced the formation of large HO-1-containing perinuclear structures. In cells recovering from sodium arsenite or cadmium chloride treatment, HO-1 accumulation initially increased to a maximum at 12h followed by a 50% reduction at 48 h. This initial increase in HO-1 levels was likely the result of new synthesis as it was inhibited by cycloheximide. Interestingly, treatment of cells with a mild heat shock enhanced HO-1 accumulation induced by low concentrations of sodium arsenite and cadmium chloride. Finally, we determined that HO-1 accumulation was induced in A6 cells by the proteasomal inhibitors, MG132, withaferin A and celastrol. An examination of heavy metal and proteasomal inhibitor-induced HO-1 accumulation in amphibians is of importance given the presence of toxic heavy metals in aquatic habitats.

Building the safety case for UAS operations in support of natural disaster response

A framework supporting the systematic development of safety cases for Unmanned Aircraft System (UAS) operations in a broad range of civil and commercial applications is presented. The case study application is the use of UAS for disaster response. In those States where regulations do not preclude UAS operations altogether, approvals for UAS operations can be granted on a case-by-case basis contingent on the provision of a safety case acceptable to the relevant National Airworthiness Authority (NAA). A safety case for UAS operations must show how the risks associated with the hazards have been managed to an acceptable level. The foundational components necessary for structuring and assessing these safety cases have not yet been proposed. Barrier-bow-tie models are used in this paper to structure the safety case for the two primary hazards of 1) a ground impact, and 2) a Mid-Air Collision (MAC). The models establish the set of Risk Control Variables (RCVs) available to reduce the risk. For the ground-impact risk model, seven RCVs are identified which in combination govern the probability of an accident. Similarly, ten RCVs are identified within the MAC model. The effectiveness of the RCVs and how they can implemented in terms of processes, policies, devices, practices, or other actions for each of the case-study applications are discussed. The framework presented can provide for the more systematic and consistent regulation of UAS through a "safety target" approach.

Causal factors of hot air ballooning incidents : identification, frequency, and potential impact

Background: Hot air ballooning incidents are relatively rare, however, when they do occur they are likely to result in a fatality or serious injury. Human error is commonly attributed as the cause of hot air ballooning incidents; however, error in itself is not an explanation for safety failures. This research aims to identify, and establish the relative importance of factors contributing towards hot air ballooning incidents. Methods: Twenty-two Australian Ballooning Federation (ABF) incident reports were thematically coded using a bottom up approach to identify causal factors. Subsequently, 69 balloonists (mean 19.51 years’ experience) participated in a survey to identify additional causal factors and rate (out of seven) the perceived frequency and potential impact to ballooning operations of each of the previously identified causal factors. Perceived associated risk was calculated by multiplying mean perceived frequency and impact ratings. Results: Incident report coding identified 54 causal factors within nine higher level areas: Attributes, Crew resource management, Equipment, Errors, Instructors, Organisational, Physical Environment, Regulatory body and Violations. Overall, ‘weather’, ‘inexperience’ and ‘poor/inappropriate decisions’ were rated as having greatest perceived associated risk. Discussion: Although errors were nominated as a prominent cause of hot air ballooning incidents, physical environment and personal attributes are also particularly important for safe hot air ballooning operations. In identifying a range of causal factors the areas of weakness surrounding ballooning operations have been defined; it is hoped that targeted safety and training strategies can now be put into place removing these contributing factors and reducing the chance of pilot error.

Risk perception and the public acceptance of drones

Unmanned aircraft, or drones, are a rapidly emerging sector of the aviation industry. There has been limited substantive research, however, into the public perception and acceptance of drones. This paper presents the results from two surveys of the Australian public designed to investigate (a) whether the public perceive drones to be riskier than existing manned aviation, (b) whether the terminology used to describe the technology influences public perception, and (c) what the broader concerns are that may influence public acceptance of the technology. We find that the Australian public currently hold a relatively neutral attitude towards drones. Respondents did not consider the technology to be overly unsafe, risky, beneficial, or threatening. Drones are largely viewed as being of comparable risk to that of existing manned aviation. Further, terminology had a minimal effect on the perception of the risks or acceptability of the technology. The neutral response is likely due to a lack of knowledge about the technology, which was also identified as the most prevalent public concern as opposed to the risks associated with its use. Privacy, military use and misuse (e.g., terrorism) were also significant public concerns. The results suggest that society is yet to form an opinion of drones. As public knowledge increases, the current position is likely to change. Industry communication and media coverage will likely influence the ultimate position adopted by the public, which can be difficult to change once established.

Visual control for automated aircraft collision avoidance systems

This thesis presents a new vision-based decision and control strategy for automated aircraft collision avoidance that can be realistically applied to the See and Avoid problem. The effectiveness of the control strategy positions the research as a major contribution toward realising the simultaneous operation of manned and unmanned aircraft within civilian airspace. Key developments include novel classical and visual predictive control frameworks, and a performance evaluation technique aligned with existing aviation practise and applicable to autonomous systems. The overall approach is demonstrated through experimental results on a small multirotor unmanned aircraft, and through high fidelity probabilistic simulation studies.

Are you on board? The role of design-led innovation in strengthening key partnerships within an Australian airport

A popular lexicon for announcing partnerships within aviation is being ‘on-board’. Like boarding a plane, business partnerships requires trust in the expertise and the philosophy of another organisation. This paper reports upon the process and findings from the completion of a customer engagement project within a leading Australian Airport, as part of the wider uptake of design-led innovation. The project was completed bilaterally with Airport Corporation and prominent retail business partner undertaking a design-led approach to collaboratively explore an observed market trend affecting the performance of both businesses. A design-led catalyst facilitated the completion of this project, working within the Airport Corporation to disseminate the skills and philosophy of design over an 18 month period using an action research method. Findings reveal that the working environment necessary for design to be utilised requires; trust in the design-led approach as a new and exploratory way of completing work; leadership within the execution and delivery of project deliverables, and; a shared intrinsic motivation to develop new skills through a design-led approach which challenges a business-as-usual mentality (BAU). Design-led innovation can be deployed specifically to strengthen business partnerships through collaborative and explorative customer engagement.

A new model for airport passenger segmentation

Recent changes in the aviation industry and in the expectations of travellers have begun to alter the way we approach our understanding, and thus the segmentation, of airport passengers. The key to successful segmentation of any population lies in the selection of the criteria on which the partitions are based. Increasingly, the basic criteria used to segment passengers (purpose of trip and frequency of travel) no longer provide adequate insights into the passenger experience. In this paper, we propose a new model for passenger segmentation based on the passenger core value, time. The results are based on qualitative research conducted in-situ at Brisbane International Terminal during 2012-2013. Based on our research, a relationship between time sensitivity and degree of passenger engagement was identified. This relationship was used as the basis for a new passenger segmentation model, namely: Airport Enthusiast (engaged, non time sensitive); Time Filler (non engaged, non time sensitive); Efficiency Lover (non engaged, time sensitive) and Efficient Enthusiast (engaged, time sensitive). The outcomes of this research extend the theoretical knowledge about passenger experience in the terminal environment. These new insights can ultimately be used to optimise the allocation of space for future terminal planning and design.

The future passenger experience: A shift from physical to virtual design

The importance of passenger experience in aviation has become well understood in the last several years. It is now generally accepted that the provision of good passenger experience is not an option, but a necessity, from an aviation profitability perspective. In this paper, we paint a picture of the future passenger experience by consolidating a number of industry and research perspectives. Using the future passenger experience as a starting point, we explore the components needed to enable this future vision. From this bottom-up approach, we identify the need to resolve data formatting and data ownership issues. The resolution of these data integration issues is necessary to enable the seamless future travel experience that is envisioned by the aviation industry. By looking at the passenger experience from this bottom-up, data centric perspective, we identify a potential shift in the way that future passenger terminals will be designed. Whereas currently the design of terminals is largely an architectural practice, in the near future, the design of the terminal building may become more of a virtual technology practice. This of course will pose a new set of challenges to designers of airport terminal environments.

Deconstructing expected passenger experience in airports

The effect of passenger satisfaction on airport profitability has been widely acknowledged in the aviation industry. As a result, there has been much attention directed towards developing a deeper understanding of the factors that influence the passenger experience. In this paper, we explore passenger experience from a novel perspective - that of the activities expected to be undertaken by passengers while in the airport terminal building. Using the Taxonomy of Passenger Experience (TOPA) as our framework, we look at the pre-travel interview data of 48 participants. The results of our analysis are used to construct an activity-centred account of the expected passenger experience for international departures. Our exploration of the expected passenger experienced revealed that not all of the TOPA activities have an equal impact on the passengers' expected experience. The processing, consumptive, preparatory and queuing activity groups featured most prominently in passengers' accounts of their upcoming airport experiences. Of these, the preparatory category was found to have the most direct impact on passenger satisfaction. Additionally, our analysis indicated that utilising queue time to prepare passengers for upcoming processing activities could have a positive effect on both satisfaction and processing efficiency. A further outcome of this research was the observation that "shopping" did not form a part of the expected experience of any of the interviewed participants. The outcomes of this study can be used by airports to assist in the management of passengers' expected experience in the terminal building. As passenger expectations and passenger satisfaction are intrinsically linked, understanding which activities have the most impact on satisfaction provides a basis from which alternate design choices can be evaluated when constructing, or fine-tuning, airport terminal designs.

Flight-training effect on the cervical muscle isometric strength of trainee pilots

External stimulus/loading initiates adaptations within skeletal muscle. It has been previously found that the cervical area has the highest loading while performing flying maneuvers under +Gz. The first purpose of this study was to examine the neck muscle response to the physical environment associated with flight training, incorporating limited exposure to +Gz force, in a Pilatus PC-9 aircraft. The second purpose was to examine the short-term range of movement (ROM) response to flight training. Isometric cervical muscle strength and ROM was monitored in 9 RAAF pilots completing an 8-mo flight-training course at Pearce Airbase in Western Australia, and in 10 controls matched for gender, age, height, and weight. Isometric cervical muscle strength and ROM were measured at baseline and at 8 mo using the multi-cervical rehabilitation unit (Hanoun Medical, Downsview, Ontario, Canada). Results indicated that an increase in pilot neck strength was limited to flexion while in a neutral position. No strength changes were recorded in any other site in the pilots or for the controls. These findings suggest that short-term exposure to the physical environment associated with flight training had a limited significant effect on increasing isometric cervical muscle strength. No significant changes were observed in pilot ROM, indicating that short-term exposure to flight does not effect ROM.

Changes in cervical spine bone mineral density in response to flight training

BACKGROUND High magnitude loads and unusual loading regimes are two important determinants for increasing bone mass. Past research demonstrated that positive Gz-induced loading, providing high loads in an unaccustomed manner, had an osteogenic effect on bone. Another determinant of bone mass is that the bone response to loading is site specific. This study sought to further investigate the site specific bone response to loading, examining the cervical spine response, the site suspected of experiencing the greatest loading, to high performance flight. METHODS Bone mineral density (BMD) and bone mineral content (BMC) was monitored in 9 RAAF trainee fighter pilots completing an 8-mo flight training course on a PC-9 and 10 age-height-weight-matched controls. RESULTS At completion of the course, the pilots had a significant increase in cervical spine BMD and total body BMC. No significant changes were found for the control group. CONCLUSIONS This study demonstrated that the physical environment associated with flight training may have contributed to a significant increase in cervical spine bone mass in the trainee PC-9 pilots. The increase in bone mass was possibly a response to the strain generated by the daily wearing of helmet and mask assembly under the influence of positive sustained accelerative forces.

Environmental contributions to childhood cancers

Recent increases in incidence of childhood cancers cannot be explained by genetic factors. Identifying the environmental risk factors that may explain increases in cancer incidence is an important step to reduce the overall burden of disease. The risk factors for which the most evidence exists include ionising radiation, ultraviolet radiation and chemicals such as benzene and pesticides, biological agents as well as parental smoking and parental substance use. Regarding the link between exposure to non-ionising radiation and development of cancer, the evidence was limited. Maternal vitamin supplementation may reduce the risk of cancer in offspring. Environmental exposures encountered during development and early childhood may be even more important contributors to the risk of cancer than exposures in adulthood and the early developmental period presents an important opportunity for cancer prevention.

Environmental contributions to autism: Explaining the rise in incidence of autistic spectrum disorders

The incidence of autism spectrum disorders, a heterogenous group of neurodevelopmental disorders is increasing. In response, there has been a concerted effort by researchers to identify environmental risk factors that explain the epidemiological changes seen with autism. Advanced parental age, maternal migrant status, maternal gestational stress, pregnancy and birth complications, maternal obesity and gestational diabetes, maternal vitamin D deficiency, use of antidepressants during gestation and exposure to organochlorine pesticides during pregnancy are all associated with an increased risk of autism. Folic acid use prior to pregnancy may reduce the risk of autism. Exposure to antenatal ultrasonography, maternal gestational cigarette and alcohol use do not appear to influence the risk of autism in offspring. There is little evidence that exposure to environmental toxins such as thimerosal, polybrominated diphenyl ethers and di-(2-ethylhexyl) phthalate in early childhood increases the risk of autism. Apart from birth complications, the current evidence suggests that the majority of environmental factors increasing the risk of autism occur in the antenatal period. Consistent with the rise in incidence in autism, some of these environmental factors are now more common in developed nations. Further research is required to determine how these environmental exposures translate to an increased risk of autism. Understanding how these exposures alter neurodevelopment in autistic children may inform both the aetiopathogenesis and the strategies for prevention of autism.