Scrapbook page of 6 photos, including Asian women at Martha Cook Building, ca. June 1924

1st scan shows entire page, 2of3 and 3of3 focus on individual snapshots from same page at higher resolution

Economic Liberalisation and Environmental Concerns: A South Asian Perspective

This Article does not have an abstract.

Export processing zones and growth triangle development: The case of the BIMP-EAGA, Southeast Asia

Exorts processing zones (EPZs) and growth triangles have been two common Asian initiatives to increase wealth and regional competitiveness in the world economy. Since they are seldom analysed jointly, this paper investigates their mutuality in the development process. Taking the problematic case of the Brunei-Indonesia-Malaysia-Philippines East ASEAN Growth Area (BIMP-EAGA) triangle, we explore the role of EPZs in enhancing regional collaboration, competitiveness, and domestic linkages. Despite the triangle's weak economic complementarities, its processing zones are found capable of advancing development by furthering opportunities in regionalisation/localisation of production. Latterly, trade and investment liberalisation within ASEAN raises broad questions about the rationale of EPZs and growth triangles. Zone-triangle nexuses will require rethinking as, under different regulatory conditions, the zones compete more directly across ASEAN and also with global rivals. Copyright © 2005 John Wiley & Sons, Ltd.

How does ownership structure affect capital structure and firm value?:Recent evidence from East Asia

The present paper examines the effects of ownership structures on capital structure and firm valuation. It argues that the effects of separation of control from cash flow rights on capital structure and firm value also depend on the separation of control from management as well as on legal rules and enforcement defining investors' protection. We obtain firm-level panel data (three stage least squares, 3SLS) estimates from four of the East Asian countries worst affected by the last crisis. There is evidence that the general wisdom that higher control than cash flow rights may lower firm value may be reversed among owner-managed family firms in the sample countries. © 2007 The Authors Journal compilation © 2007 The European Bank for Reconstruction and Development.

Negative data in DEA:a directional distance approach applied to bank branches

This paper is drawn from the use of data envelopment analysis (DEA) in helping a Portuguese bank to manage the performance of its branches. The bank wanted to set targets for the branches on such variables as growth in number of clients, growth in funds deposited and so on. Such variables can take positive and negative values but apart from some exceptions, traditional DEA models have hitherto been restricted to non-negative data. We report on the development of a model to handle unrestricted data in a DEA framework and illustrate the use of this model on data from the bank concerned.

New insights on measuring bank branches efficiency through DEA:transactional, operational, and profit assessments

This thesis presents a number of methodological developments that were raised by a real life application to measuring the efficiency of bank branches. The advent of internet banking and phone banking is changing the role of bank branches from a predominantly transaction-based one to a sales-oriented role. This fact requires the development of new forms of assessing and comparing branches of a bank. In addition, performance assessment models must also take into account the fact that bank branches are service and for-profit organisations to which providing adequate service quality as well as being profitable are crucial objectives. This study analyses bank branches performance in their new roles in three different areas: their effectiveness in fostering the use of new transaction channels such as the internet and the telephone (transactional efficiency); their effectiveness in increasing sales and their customer base (operational efficiency); and their effectiveness in generating profits without compromising the quality of service (profit efficiency). The chosen methodology for the overall analysis is Data Envelopment Analysis (DEA). The application attempted here required some adaptations to existing DEA models and indeed some new models so that some specialities of our data could be handled. These concern the development of models that can account for negative data, the development of models to measure profit efficiency, and the development of models that yield production units with targets that are nearer to their observed levels than targets yielded by traditional DEA models. The application of the developed models to a sample of Portuguese bank branches allowed their classification according to the three performance dimensions (transactional, operational and profit efficiency). It also provided useful insights to bank managers regarding how bank branches compare between themselves in terms of their performance, and how, in general, the three performance dimensions are connected between themselves.

Marketing in indigenous and Asian small firms in the West Midlands.

This study is concerned with examining the application of marketing during the start-up, development and growth of small firms in the West Midlands. As an exploratory study, it provides evidence to support the central hypothesis of the thesis that whilst many small firms have the potential to progress through to the successful growth stage of development, they fail to do so because of their owner-managers' orientation towards production and selling and because they do not apply formal marketing during the initial stages of business development. A comparative approach to studying marketing in indigenous and Asian firms is adopted in an attempt to fill a gap in the literature on the characteristics and differences in the formation and development processes of these two groups of enterprises. The study has three main objectives and is based on qualitative research techniques of in-depth interviews, case studies and longitudinal studies among sixty-six firms representing the key activities of the small firms sector of the local economy. Firstly, it investigates owner-managers' orientation in developing and managing new and established businesses and explores the sources of, and changes in their orientation during the various stages of development. Secondly, it assesses the owner-manager's awareness and understanding of what constitutes the marketing function and investigates what aspects of marketing are applied during the different stages of business development. Finally, the study monitors and evaluates the outcomes and implications of applying formal marketing techniques in a small sample of firms over a period of two years. The thesis concludes by using the findings of the study to contribute additions to existing models of growth and by proposing new models of evolution and application of marketing in small firms.

User interface design support for the development of knowledge-based systems

The present scarcity of operational knowledge-based systems (KBS) has been attributed, in part, to an inadequate consideration shown to user interface design during development. From a human factors perspective the problem has stemmed from an overall lack of user-centred design principles. Consequently the integration of human factors principles and techniques is seen as a necessary and important precursor to ensuring the implementation of KBS which are useful to, and usable by, the end-users for whom they are intended. Focussing upon KBS work taking place within commercial and industrial environments, this research set out to assess both the extent to which human factors support was presently being utilised within development, and the future path for human factors integration. The assessment consisted of interviews conducted with a number of commercial and industrial organisations involved in KBS development; and a set of three detailed case studies of individual KBS projects. Two of the studies were carried out within a collaborative Alvey project, involving the Interdisciplinary Higher Degrees Scheme (IHD) at the University of Aston in Birmingham, BIS Applied Systems Ltd (BIS), and the British Steel Corporation. This project, which had provided the initial basis and funding for the research, was concerned with the application of KBS to the design of commercial data processing (DP) systems. The third study stemmed from involvement on a KBS project being carried out by the Technology Division of the Trustees Saving Bank Group plc. The preliminary research highlighted poor human factors integration. In particular, there was a lack of early consideration of end-user requirements definition and user-centred evaluation. Instead concentration was given to the construction of the knowledge base and prototype evaluation with the expert(s). In response to this identified problem, a set of methods was developed that was aimed at encouraging developers to consider user interface requirements early on in a project. These methods were then applied in the two further projects, and their uptake within the overall development process was monitored. Experience from the two studies demonstrated that early consideration of user interface requirements was both feasible, and instructive for guiding future development work. In particular, it was shown a user interface prototype could be used as a basis for capturing requirements at the functional (task) level, and at the interface dialogue level. Extrapolating from this experience, a KBS life-cycle model is proposed which incorporates user interface design (and within that, user evaluation) as a largely parallel, rather than subsequent, activity to knowledge base construction. Further to this, there is a discussion of several key elements which can be seen as inhibiting the integration of human factors within KBS development. These elements stem from characteristics of present KBS development practice; from constraints within the commercial and industrial development environments; and from the state of existing human factors support.

The promoter polymorphism -232C/G of the PCK1 gene is associated with type 2 diabetes in a UK-resident South Asian population

Background - The PCK1 gene, encoding cytosolic phosphoenolpyruvate carboxykinase (PEPCKC), has previously been implicated as a candidate gene for type 2 diabetes (T2D) susceptibility. Rodent models demonstrate that over-expression of Pck1 can result in T2D development and a single nucleotide polymorphism (SNP) in the promoter region of human PCK1 (-232C/G) has exhibited significant association with the disease in several cohorts. Within the UK-resident South Asian population, T2D is 4 to 6 times more common than in indigenous white Caucasians. Despite this, few studies have reported on the genetic susceptibility to T2D in this ethnic group and none of these has investigated the possible effect of PCK1 variants. We therefore aimed to investigate the association between common variants of the PCK1 gene and T2D in a UK-resident South Asian population of Punjabi ancestry, originating predominantly from the Mirpur area of Azad Kashmir, Pakistan. Methods - We used TaqMan assays to genotype five tagSNPs covering the PCK1 gene, including the -232C/G variant, in 903 subjects with T2D and 471 normoglycaemic controls. Results - Of the variants studied, only the minor allele (G) of the -232C/G SNP demonstrated a significant association with T2D, displaying an OR of 1.21 (95% CI: 1.03 - 1.42, p = 0.019). Conclusion - This study is the first to investigate the association between variants of the PCK1 gene and T2D in South Asians. Our results suggest that the -232C/G promoter polymorphism confers susceptibility to T2D in this ethnic group.

Did the World Bank drive tariff reforms in Eastern Africa?

This paper explores tariff reform in Ethiopia, Kenya, Tanzania and Uganda between the early 1990s and early 2000s. Tariffs were reformed in an across the board manner consistent with implementing World Bank programs: the average tariff was reduced and the dispersion of tariffs was compressed, with the highest tariffs being eliminated. There is limited evidence of political economy influences on the cross sector pattern of tariffs and reforms, except for a tendency to offer greater protection to larger manufacturing sectors in all countries except Uganda. The technocratic reforms have diluted relative protection and political economy influences in all the four countries.

International technology transfer and development of capabilities in Chinese state-owned manufacturing enterprises:lessons from 20 years of case research

Technological capabilities in Chinese manufacturing have been transformed in the last three decades. However, the extent to which domestic market oriented state owned enterprises (SOEs) have developed their capabilities is not clear. Six SOEs in the automotive, steel and machine tools sectors in Beijing and Tianjin have been studied since the mid-1990s to assess the capability levels attained and the role of external sources and internal efforts in developing them. Aided by government policies, acquisition of technology and their own efforts, the case study companies appear to be broadly following the East Asian late industrialisation model. All six enterprises demonstrate competences in operating established technology, managing investment and making product and process improvements. The evidence suggests that companies without foreign joint venture (JV) collaborations have made more progress in this respect.

ICT adoption and ebusiness development:Understanding ICT adoption amongst ethnic minority businesses

This paper builds upon a series of studies that have identified the comparatively low uptake of ICT amongst EMBs (Ram and Smallbone, 1999; Foley and Ram 2002; Allinson et al., 2004). Existing studies have only tentatively considered the causal factors for this lower adoption rate in comparison to non-EMBs. Within the context of a pilot study, aiming to understand ICT adoption amongst EMBs, an action research approach is adopted as a means of influencing, evaluating and underpinning ICT adoption (Beckinsale and Ram, 2006). The approach is methodologically distinctive in its utilization of action research with a critical realist approach as a means of policy evaluation; this is conducive to 'policy learning', and the understanding of causal mechanisms in the EMBs. Actors involved in the implementation were interviewed, as well as the business owners themselves. Another distinguishing feature is the application of Yap et al.'s (1992) schema to identify causal mechanisms, to examine actions and experiences and to understand the impact on the EMBs studied. The findings highlight the complex interaction and relationships of internal and external factors in shaping approaches to ICT implementation. Factors such as size, strategy and business age are germane but so too, albeit to a lesser degree, are cultural influences such as involvement in co-ethnic networks. Significantly, changes to particular causal mechanisms such as business support altered adoption and implementation of ICT. Distinct issues for Chinese and Asian-owned business and potentially more broadly EMBs are identified providing a framework for other EMBs. © The Author(s) 2010.

Technology transfer and sustainable industrial development for developing countries

This paper reports on a part of work for the UNIDO initiative on technology transfer for sustainable industrial development. The proposed technology transfer framework, adapted from the East Asian late industrialisers model, identifies two categories of countries requiring support for enhancing their technological capabilities: (a) very late industrialisers (“low income” developing countries), and (b) slow industrialisers (countries with sizeable manufacturing sectors but limited success in gaining international competitiveness) and three technology transfer routes: (a) through trade and aid to strengthen indigenous production for domestic markets (Route 1); (b) through FDI and contracting to develop export oriented firms (Route 2), and (c) through the supply chain of capital equipment and materials to develop local subcontracting capacity (Route 3). Very late industrialisers need support to start with Route 1 in selected sectors and upgrade through imported mature technologies. Appropriate product innovations are also possible. The slow industrialisers have more scope for increased technology transfer through Routes 2 and 3.