980 resultados para ArcGis Runtime SDK for Androide


Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper describes the spatial data handling procedures used to create a vector database of the Connecticut shoreline from Coastal Survey Maps. The appendix contains detailed information on how the procedures were implemented using Geographic Transformer Software 5 and ArcGIS 8.3. The project was a joint project of the Connecticut Department of Environmental Protection and the University of Connecticut Center for Geographic Information and Analysis.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study retrospectively evaluated the spatial and temporal disease patterns associated with influenza-like illness (ILI), positive rapid influenza antigen detection tests (RIDT), and confirmed H1N1 S-OIV cases reported to the Cameron County Department of Health and Human Services between April 26 and May 13, 2009 using the space-time permutation scan statistic software SaTScan in conjunction with geographical information system (GIS) software ArcGIS 9.3. The rate and age-adjusted relative risk of each influenza measure was calculated and a cluster analysis was conducted to determine the geographic regions with statistically higher incidence of disease. A Poisson distribution model was developed to identify the effect that socioeconomic status, population density, and certain population attributes of a census block-group had on that area's frequency of S-OIV confirmed cases over the entire outbreak. Predominant among the spatiotemporal analyses of ILI, RIDT and S-OIV cases in Cameron County is the consistent pattern of a high concentration of cases along the southern border with Mexico. These findings in conjunction with the slight northward space-time shifts of ILI and RIDT cluster centers highlight the southern border as the primary site for public health interventions. Finally, the community-based multiple regression model revealed that three factors—percentage of the population under age 15, average household size, and the number of high school graduates over age 25—were significantly associated with laboratory-confirmed S-OIV in the Lower Rio Grande Valley. Together, these findings underscore the need for community-based surveillance, improve our understanding of the distribution of the burden of influenza within the community, and have implications for vaccination and community outreach initiatives.^

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A population based ecological study was conducted to identify areas with a high number of TB and HIV new diagnoses in Harris County, Texas from 2009 through 2010 by applying Geographic Information Systems to determine whether distinguished spatial patterns exist at the census tract level through the use of exploratory mapping. As of 2010, Texas has the fourth highest occurrence of new diagnoses of HIV/AIDS and TB.[31] The Texas Department of State Health Services (DSHS) has identified HIV infected persons as a high risk population for TB in Harris County.[29] In order to explore this relationship further, GIS was utilized to identify spatial trends. ^ The specific aims were to map TB and HIV new diagnoses rates and spatially identify hotspots and high value clusters at the census tract level. The potential association between HIV and TB was analyzed using spatial autocorrelation and linear regression analysis. The spatial statistics used were ArcGIS 9.3 Hotspot Analysis and Cluster and Outlier Analysis. Spatial autocorrelation was determined through Global Moran's I and linear regression analysis. ^ Hotspots and clusters of TB and HIV are located within the same spatial areas of Harris County. The areas with high value clusters and hotspots for each infection are located within the central downtown area of the city of Houston. There is an additional hotspot area of TB located directly north of I-10 and a hotspot area of HIV northeast of Interstate 610. ^ The Moran's I Index of 0.17 (Z score = 3.6 standard deviations, p-value = 0.01) suggests that TB is statistically clustered with a less than 1% chance that this pattern is due to random chance. However, there were a high number of features with no neighbors which may invalidate the statistical properties of the test. Linear regression analysis indicated that HIV new diagnoses rates (β=−0.006, SE=0.147, p=0.970) and census tracts (β=0.000, SE=0.000, p=0.866) were not significant predictors of TB new diagnoses rates. ^ Mapping products indicate that census tracts with overlapping hotspots and high value clusters of TB and HIV should be a targeted focus for prevention efforts, most particularly within central Harris County. While the statistical association was not confirmed, evidence suggests that there is a relationship between HIV and TB within this two year period.^

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study assessed and compared sociodemographic and income characteristics along with food and physical activity assets (i.e. grocery stores, fast food restaurants, and park areas) in the Texas Childhood Obesity Research Demonstration (CORD) Study intervention and comparison catchment areas in Houston and Austin, Texas. The Texas CORD Study used a quasi-experimental study design, so it is necessary to establish the interval validity of the study characteristics by confirming that the intervention and comparison catchment areas are statistically comparable. In this ecological study, ArcGIS and Esri Business Analyst were used to spatially relate U.S. Census Bureau and other business listing data to the specific school attendance zones within the catchment areas. T-tests were used to compare percentages of sociodemographic and income characteristics and densities of food and physical activity assets between the intervention and comparison catchment areas.^ Only five variables were found to have significant differences between the intervention and comparison catchment areas: Age groups 0-4 and 35-64, the percentage of owner-occupied and renter-occupied households, and the percentage of Asian and Pacific Islander residents. All other variables showed no significant differences between the two groups. This study shows that the methodology used to select intervention and comparison catchment areas for the Texas CORD Study was effective and can be used in future studies. The results of this study can be used in future Texas CORD studies to confirm the comparability of the intervention and comparison catchment areas. In addition, this study demonstrates a methodology for describing detailed characteristics about a geographic area that practitioners, researchers, and educators can use.^

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Hasta el momento se ha recogido información secundaria, se ha referenciado, tomado nota, escaneado y/o fotocopiado a fin de procesar en el siguiente periodo aunque se ha avanzado ya en ese sentido. Al ser información cualitativa su procesamiento es del mismo modo. La información recogida se procesa también con planos en formato GIS (Sistema de Información Geográfico con programa ARCGIS).La información geoprocesada y editada en planos temáticos se entregaran con el informe final. La información recogida y en principio procesada hace referencia al análisis de acciones y proyectos de inversión pública implementada y por implementarse en Posadas y áreas metropolitanas y al balance de pérdidas-reposiciones desde los aspectos económico-físico-territorial. Hasta el presente se han desarrollado los siguientes aspectos:Obras civiles Yayreta en Posadas y su influencia en el desarrollo de la ciudad; Encuesta realizada en la ciudad de Posadas sobre la visión de los ciudadanos respecto a los problemas de la ciudad y las responsabilidades institucionales; Información cualitativa recogida en lo que denominamos el primer cordón o conglomerado urbano, conformado por una heterogeneidad de barrios de NES medio y bajo. Las técnicas utilizadas en este punto fueron tres grupos focalizados; Se trata del procesamiento de una encuesta realizada en barrios de construcción pública en Posadas y Garupa, ambos conforman el gran conglomerado metropolitano de Posadas aunque se trate de dos municipios diferentes; Se analiza allí talleres realizados con población vulnerable de barrios de construcción pública; Se realiza un ensayo que permita una interpretación conceptual del problema abordado.

Relevância:

10.00% 10.00%

Publicador:

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The distribution of seagrass and associated benthic communities on the reef and lagoon of Low Isles, Great Barrier Reef, was mapped between the 29 July and 29 August 1997. For this survey, observers walked or free-dived at survey points positioned approximately 50 m apart along a series of transects. Visual estimates of above-ground seagrass biomass and % cover of each benthos and substrate type were recorded at each survey point. A differential handheld global positioning system (GPS) was used to locate each survey point (accuracy ±3m). A total of 349 benthic survey points were examined. To assist with mapping meadow/habitat type boundaries, an additional 177 field points were assessed and a georeferenced 1:12,000 aerial photograph (26th August 1997) was used as a secondary source of information. Bathymetric data (elevation below Mean Sea Level) measured at each point assessed and from Ellison (1997) supplemented information used to determine boundaries, particularly in the subtidal lagoon. 127.8 ±29.6 hectares was mapped. Seagrass and associated benthic community data was derived by haphazardly placing 3 quadrats (0.25m**2) at each survey point. Seagrass above ground biomass (standing crop, grams dry weight (g DW m**-2)) was determined within each quadrat using a non-destructive visual estimates of biomass technique and the seagrass species present identified. In addition, the cover of all benthos was measured within each of the 3 quadrats using a systematic 5 point method. For each quadrat, frequency of occurrence for each benthic category was converted to a percentage of the total number of points (5 per quadrat). Data are presented as the average of the 3 quadrats at each point. Polygons of discrete seagrass meadow/habitat type boundaries were created using the on-screen digitising functions of ArcGIS (ESRI Inc.), differentiated on the basis of colour, texture, and the geomorphic and geographical context. The resulting seagrass and benthic cover data of each survey point and for each seagrass meadow/habitat type was linked to GPS coordinates, saved as an ArcMap point and polygon shapefile, respectively, and projected to Universal Transverse Mercator WGS84 Zone 55 South.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The International Bathymetric Chart of the Southern Ocean (IBCSO) Version 1.0 is a new digital bathymetric model (DBM) portraying the seafloor of the circum-Antarctic waters south of 60° S. IBCSO is a regional mapping project of the General Bathymetric Chart of the Oceans (GEBCO). IBCSO Version 1.0 DBM has been compiled from all available bathymetric data collectively gathered by more than 30 institutions from 15 countries. These data include multibeam and single beam echo soundings, digitized depths from nautical charts, regional bathymetric gridded compilations, and predicted bathymetry. Specific gridding techniques were applied to compile the DBM from the bathymetric data of different origin, spatial distribution, resolution, and quality. The IBCSO Version 1.0 DBM has a resolution of 500 x 500 m, based on a polar stereographic projection, and is publicly available together with a digital chart for printing from the project website (http://www.ibcso.org) and from the two data sets shown at the bottom of this page.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Based on data from R.V. Pelagia, R.V. Sonne and R.V. Meteor multibeam sonar surveys, a high resolution bathymetry was generated for the Mozambique Ridge. The mapping area is divided into five sheets, one overview and four sub-sheets. The boundaries are (west/east/south/north): Sheet 1: 28°30' E/37°00' E/36°20' S/24°50' S; Sheet 2: 32°45' E/36°45' E/28°20' S/25°20' S; Sheet 3: 31°30' E/36°45' E/30°20' S/28°10' S; Sheet 4: 30°30' E/36°30' E/33°15' S/30°15' S; Sheet 5: 28°30' E/36°10' E/36°20' S/33°10' S. Each sheet was generated twice: one from swath sonar bathymetry only, the other one is completed with depths from ETOPO2 predicted bathymetry. Basic outcome of the investigation are Digital Terrain Models (DTM), one for each sheet with 0.05 arcmin (~91 meter) grid spacing and one for the entire area (sheet 1) with 0.1 arcmin grid spacing. The DTM's were utilized for contouring and generating maps. The grid formats are NetCDF (Network Common Data Form) and ASCII (ESRI ArcGIS exchange format). The Maps are formatted as jpg-images and as small sized PNG (Portable Network Graphics) preview images. The provided maps have a paper size of DIN A0 (1189 x 841 mm).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper presents a new tool for large-area photo-mosaicking (LAPM tool). This tool was developed specifically for the purpose of underwater mosaicking, and it is aimed at providing end-user scientists with an easy and robust way to construct large photo-mosaics from any set of images. It is notably capable of constructing mosaics with an unlimited number of images on any modern computer (minimum 1.30 GHz, 2 GB RAM). The mosaicking process can rely on both feature matching and navigation data. This is complemented by an intuitive graphical user interface, which gives the user the ability to select feature matches between any pair of overlapping images. Finally, mosaic files are given geographic attributes that permit direct import into ArcGIS. So far, the LAPM tool has been successfully used to construct geo-referenced photo-mosaics with photo and video material from several scientific cruises. The largest photo-mosaic contained more than 5000 images for a total area of about 105,000 m**2. This is the first article to present and to provide a finished and functional program to construct large geo-referenced photo-mosaics of the seafloor using feature detection and matching techniques. It also presents concrete examples of photo-mosaics produced with the LAPM tool.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Glacier thickness is an important factor in the course of glacier retreat in a warming climate. Thiese study data presents the results (point data) of GPR surveys on 66 Austrian mountain glaciers carried out between 1995 and 2014. The glacier areas range from 0.001 to 18.4 km**2, and their ice thickness has been surveyed with an average density of 36 points/km**2 . The glacier areas and surface elevations refer to the second Austrian glacier inventory (mapped between 1996 and 2002). According to the glacier state recorded in the second glacier inventory, the 64 glaciers cover an area of 223.3±3.6 km**3. Maps of glacier thickness have been calculated by Fischer and Kuhn (2013) with a mean thickness of 50±3 m and contain an glacier volume of 11.9±1.1 km**3. The mean maximum ice thickness is 119±5 m. The ice thickness measurements have been carried out with the transmitter of Narod and Clarke (1994) combined with restively loaded dipole antennas (Wu and King, 1965; Rose and Vickers, 1974) at central wavelengths of 6.5 (30 m antenna length) and 4.0 MHz (50 m antenna length). The signal was recorded trace by trace with an oscilloscope. 168 m/µs as used by Haeberli et al. (1982), Bauder (2001), and Narod and Clarke (1994), the signal velocity in air is assumed to be 300 m/µs. Details on the method can be are found in Fischer and Kuhn (2013), as well as Span et al. (2005) and Fischer et al. (2007).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Vast portions of Arctic and sub-Arctic Siberia, Alaska and the Yukon Territory are covered by ice-rich silty to sandy deposits that are containing large ice wedges, resulting from syngenetic sedimentation and freezing. Accompanied by wedge-ice growth in polygonal landscapes, the sedimentation process was driven by cold continental climatic and environmental conditions in unglaciated regions during the late Pleistocene, inducing the accumulation of the unique Yedoma deposits up to >50 meters thick. Because of fast incorporation of organic material into syngenetic permafrost during its formation, Yedoma deposits include well-preserved organic matter. Ice-rich deposits like Yedoma are especially prone to degradation triggered by climate changes or human activity. When Yedoma deposits degrade, large amounts of sequestered organic carbon as well as other nutrients are released and become part of active biogeochemical cycling. This could be of global significance for future climate warming as increased permafrost thaw is likely to lead to a positive feedback through enhanced greenhouse gas fluxes. Therefore, a detailed assessment of the current Yedoma deposit coverage and its volume is of importance to estimate its potential response to future climate changes. We synthesized the map of the coverage and thickness estimation, which will provide critical data needed for further research. In particular, this preliminary Yedoma map is a great step forward to understand the spatial heterogeneity of Yedoma deposits and its regional coverage. There will be further applications in the context of reconstructing paleo-environmental dynamics and past ecosystems like the mammoth-steppe-tundra, or ground ice distribution including future thermokarst vulnerability. Moreover, the map will be a crucial improvement of the data basis needed to refine the present-day Yedoma permafrost organic carbon inventory, which is assumed to be between 83±12 (Strauss et al., 2013, doi:10.1002/2013GL058088) and 129±30 (Walter Anthony et al., 2014, doi:10.1038/nature13560) gigatonnes (Gt) of organic carbon in perennially-frozen archives. Hence, here we synthesize data on the circum-Arctic and sub-Arctic distribution and thickness of Yedoma for compiling a preliminary circum-polar Yedoma map. For compiling this map, we used (1) maps of the previous Yedoma coverage estimates, (2) included the digitized areas from Grosse et al. (2013) as well as extracted areas of potential Yedoma distribution from additional surface geological and Quaternary geological maps (1.: 1:500,000: Q-51-V,G; P-51-A,B; P-52-A,B; Q-52-V,G; P-52-V,G; Q-51-A,B; R-51-V,G; R-52-V,G; R-52-A,B; 2.: 1:1,000,000: P-50-51; P-52-53; P-58-59; Q-42-43; Q-44-45; Q-50-51; Q-52-53; Q-54-55; Q-56-57; Q-58-59; Q-60-1; R-(40)-42; R-43-(45); R-(45)-47; R-48-(50); R-51; R-53-(55); R-(55)-57; R-58-(60); S-44-46; S-47-49; S-50-52; S-53-55; 3.: 1:2,500,000: Quaternary map of the territory of Russian Federation, 4.: Alaska Permafrost Map). The digitalization was done using GIS techniques (ArcGIS) and vectorization of raster Images (Adobe Photoshop and Illustrator). Data on Yedoma thickness are obtained from boreholes and exposures reported in the scientific literature. The map and database are still preliminary and will have to undergo a technical and scientific vetting and review process. In their current form, we included a range of attributes for Yedoma area polygons based on lithological and stratigraphical information from the original source maps as well as a confidence level for our classification of an area as Yedoma (3 stages: confirmed, likely, or uncertain). In its current version, our database includes more than 365 boreholes and exposures and more than 2000 digitized Yedoma areas. We expect that the database will continue to grow. In this preliminary stage, we estimate the Northern Hemisphere Yedoma deposit area to cover approximately 625,000 km². We estimate that 53% of the total Yedoma area today is located in the tundra zone, 47% in the taiga zone. Separated from west to east, 29% of the Yedoma area is found in North America and 71 % in North Asia. The latter include 9% in West Siberia, 11% in Central Siberia, 44% in East Siberia and 7% in Far East Russia. Adding the recent maximum Yedoma region (including all Yedoma uplands, thermokarst lakes and basins, and river valleys) of 1.4 million km² (Strauss et al., 2013, doi:10.1002/2013GL058088) and postulating that Yedoma occupied up to 80% of the adjacent formerly exposed and now flooded Beringia shelves (1.9 million km², down to 125 m below modern sea level, between 105°E - 128°W and >68°N), we assume that the Last Glacial Maximum Yedoma region likely covered more than 3 million km² of Beringia. Acknowledgements: This project is part of the Action Group "The Yedoma Region: A Synthesis of Circum-Arctic Distribution and Thickness" (funded by the International Permafrost Association (IPA) to J. Strauss) and is embedded into the Permafrost Carbon Network (working group Yedoma Carbon Stocks). We acknowledge the support by the European Research Council (Starting Grant #338335), the German Federal Ministry of Education and Research (Grant 01DM12011 and "CarboPerm" (03G0836A)), the Initiative and Networking Fund of the Helmholtz Association (#ERC-0013) and the German Federal Environment Agency (UBA, project UFOPLAN FKZ 3712 41 106).

Relevância:

10.00% 10.00%

Publicador:

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Austrian glacier inventory 1969 was compiled from airborne photogrammetry dating from September and October 1969. It includes not only area and surface elevation, but also a number of other parameters as aspect, maximum and minimum elevation, position, ablation and accumulation area. The dataset published here are the orginal results. In course of the compilation of the second Austrian glacier inventory, the photogrammetric data partly has been reanalysed. While in this data set snow areas connected to the glaciers and snow patches in the upper parts of the glacier have not been added to the glacier area, the second glacier inventory included the snow patches.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The increasing complexity of current software systems is encouraging the development of self-managed software architectures, i.e. systems capable of reconfiguring their structure at runtime to fulfil a set of goals. Several approaches have covered different aspects of their development, but some issues remain open, such as the maintainability or the scalability of self-management subsystems. Centralized approaches, like self-adaptive architectures, offer good maintenance properties but do not scale well for large systems. On the contrary, decentralized approaches, like self-organising architectures, offer good scalability but are not maintainable: reconfiguration specifications are spread and often tangled with functional specifications. In order to address these issues, this paper presents an aspect-oriented autonomic reconfiguration approach where: (1) each subsystem is provided with self-management properties so it can evolve itself and the components that it is composed of; (2) self-management concerns are isolated and encapsulated into aspects, thus improving its reuse and maintenance. Povzetek: Predstavljen je pristop s samo-preoblikovanjem programske arhitekture.