Valutazione delle politiche di sviluppo locale: una comparazione internazionale

Lo sviluppo locale rappresenta, non solo per gli economisti, un tema di analisi sempre più rilevante sia al livello istituzionale che al livello scientifico. La complessità degli aspetti inerenti lo sviluppo locale richiede il coinvolgimento di diverse discipline, in ambito economico, politico, sociale e ambientale e di tutti i livelli istituzionali. Parallelamente è cresciuta l’esigenza di processi valutativi coerenti e sistematici, basati su di un numero sempre maggiore di strumenti e metodologie di valutazione. Dall’orientamento della Commissione Europea emerge del resto con sempre maggiore evidenza il binomio fra politica di sviluppo locale e valutazione, che coinvolge i diversi livelli di governo. Il presente lavoro realizza un quadro delle politiche di sviluppo locale, partendo dal livello europeo fino ad arrivare al livello locale, ed una successiva analisi di metodologie e strumenti di valutazione consolidati e di frontiera. La considerazione della valutazione come strumento strategico per le politiche di sviluppo locale trova applicazione nella realizzazione di una analisi comparativa di due aree di montagna. Tali aree, identificate nell’Appennino Bolognese e nell’area montana della Contea di Brasov in Romania, pur collocate in paesi a diverso livello di sviluppo, risultano confrontabili, in termini di similitudini e criticità, al fine di trarre considerazioni di policy inerenti il disegno di adeguate politiche di riqualificazione, mettendo in luce l’importanza del processo valutativo e la necessità di contribuire a diffondere una vera e propria cultura della valutazione.

Stratigraphy and Palaeontology of the Late Cretaceous Wapiti Formation, west-central Alberta, Canada

A complete stratigraphic assessment and revision of the middle Campanian to upper Maastrichtian Wapiti Formation in north-western Alberta and north-eastern British Columbia is the main aim of this research project. The study area encompasses an area of approximately 200X180 km in the Grande Prairie County (west-central Alberta) and easternmost British Columbia, Canada. Results presented here indicate that the 1300m thick succession currently reported in the literature as “undifferentiated lithostratigraphic unit”, consists of five lithostratigraphic units and four unconformity-bounded depositional sequences; their study and description have been documented integrating several geological disciplines, including sequence stratigraphic methods, well-log signatures, facies analysis, and fossil associations. On the whole, particular attention has been given to 1) age and nature of both basal and upper contacts of the Wapiti Formation, 2) effective mappability of lithostratigraphic units and depositional sequences in western Alberta, and 3) the identification of previously undetermined maximum flooding surface of the Bearpaw seaway and Drumheller Marine Tongue, which are reference marine unit in central and southern Alberta. A second, but not less important, guideline for the project has been the rich paleontological record of the Wapiti deposits. Detailed paleoenvironmental and taxonomical information on old and new finds have been the base for correlation with well known associations of Alaska, southern Alberta, and Montana. Newly discovered rich fossil localities documented an extraordinarily diverse fauna during the latest Cretaceous, including dinosaurs, squamates, and fresh-water fishes and reptiles. Lastly, in order to better characterize the Wapiti Formation, major marker beds were described: these include several bentonites (altered volcanic ash deposits) which have been documented over an area of almost 30.000 km2, as well as four major coal zones, characterized by tabular coal seams with an overall thickness of 2 meters. Such marker beds represent a formidable tool for high-resolution chronology and regional correlations within the Late Cretaceous Alberta foreland basin.

The role of collective action in the provision of agri-environmental public goods: theoretical development through case studies in Italy

The thesis aims at analysing the role of collective action as a viable alternative to the traditional forms of intervention in agriculture in order to encourage the provision of agri-environmental public goods. Which are the main benefits of collective action, in terms of effectiveness and efficiency, compared to traditional market or public intervention policies? What are the drivers that encourage farmers to participate into collective action? To what extent it is possible to incorporate collective aspects into policies aimed at providing agri-environmental public goods? With the objective of addressing these research questions, the thesis is articulated in two levels: a theoretical analysis on the role of collective action in the provision of public goods and a specific investigation of two local initiative,s were an approach collective management of agro-environmental resources was successfully implemented. The first case study concerns a project named “Custodians of the Territory”, developed by the local agency in Tuscany “Comunità Montana Media Valle del Serchio”, which settled for an agreement with local farmers for a collective provision of environmental services related to the hydro-geological management of the district. The second case study is related to the territorial agri-environmental agreement experimented in Valdaso (Marche), where local farmers have adopted integrated pest management practices collectively with the aim of reducing the environmental impact of their farming practices. The analysis of these initiatives, carried out through participatory methods (Rapid Rural Appraisal), allowed developing a theoretical discussion on the role of innovative tools (such as co-production and co-management) in the provision of agri-environmental public goods. The case studies also provided some recommendations on the government intervention and policies needed to promote successful collective action for the provision of agri-environmental public goods.

Strategie insediative, economiche e scambi culturali nell'Appennino bolognese e romagnolo nell'eta' del Bronzo

Il seguente lavoro analizza lo sviluppo dell’occupazione territoriale dell’area collinare e montana del bolognese e della Romagna nell’età del Bronzo. Si sono censite le attestazioni archeologiche relative all’età del Bronzo nell’area di studio, per analizzare le tendenze insediative e le loro eventuali modificazioni nel corso del tempo, onde individuare le strategie alla base del scelta del luogo da insediare e le eventuali vie di percorrenza. Attraverso l’analisi tipologica del materiale rinvenuto nei vari contesti si è cercato di determinare le influenze culturali provenienti dal centro Italia o dalla zona terramaricola. Per raggiungere questo obbiettivo si sono analizzati i dati di archivio della Soprintendenza ai beni archeologici dell’Emilia Romagna e l’Archivio Renato Scarani, protagonista delle ricerche archeologiche in Emilia Romagna per il periodo degli anni ’50-’70 del XX secolo, recentemente acquisito dall’Università di Bologna. Ai dati desunti dagli archivi, che in molti casi hanno chiarito le vicende concernenti le indagini ed i posizionamenti di molti dei siti segnalati ed esplorati tra la seconda metà del XIX e gli anni ’70 del XX secolo, che costituiscono la maggioranza del campione analizzato, si sono aggiunti i dati recentemente acquisiti a seguito degli scavi a Monterenzio Località Chiesa Vecchia (Bo), uno dei siti più importanti (per stratigrafia conservata e per contesto territoriale) dell'Appennino Bolognese.

Progettazione e verifica di una pavimentazione stradale

Il presente elaborato ha lo scopo di descrivere il dimensionamento e la seguente verifica di una pavimentazione stradale per una strada montana di categoria C2, il cui progetto di massima è stato realizzato nell’ A.S: 2012/2013. La sovrastruttura stradale è costituita da un insieme di strati che, partendo dal piano di viabile, raggiungono la sommità del rilevato o il piano di posa nelle sezioni in trincea. La sua funzione principale consiste nel ripartire i carichi, applicati in superficie dai veicoli, in modo da renderli compatibili con la portanza del sottofondo. Poiché le sollecitazioni si smorzano con la profondità, i materiali degli strati devono avere caratteristiche fisico-meccaniche diverse in funzione dell’intensità e del tipo di sollecitazione prevalente. Una sovrastruttura stradale deve rispondere ad alcuni requisiti fondamentali: - Portanza: rappresenta l’attitudine a sopportare carichi senza subire deformazioni elastiche e plastiche oltre una soglia limite. È affidata principalmente agli strati profondi e condiziona la vita utile della sovrastruttura; - Aderenza: è un fattore fondamentale per il raggiungimento degli obiettivi di sicurezza della circolazione ed è collegata alle caratteristiche compositive e alla tessitura dello strato superficiale; - Regolarità: da essa dipendono il comfort di marcia e la sicurezza del moto; - Drenabilità: anch’essa connessa alle esigenze di sicurezza e dipendente dalla composizione delle miscele utilizzate; - Visibilità: funzione del colore e delle caratteristiche di assorbimento della luce del materiale costituente il tappeto superficiale, anch’essa strettamente collegata ai requisiti di sicurezza. La piattaforma stradale (descritta all’interno del capitolo 2) è costituita da due corsie, una per ogni senso di marcia, della larghezza di 3.50 metri, una banchina laterale di 1.25 metri e un ciglio di 0.75 metri per ogni senso di marcia.

A homeopathic remedy from arnica, marigold, St. John's wort and comfrey accelerates in vitro wound scratch closure of NIH 3T3 fibroblasts

Background Drugs of plant origin such as Arnica montana, Calendula officinalis or Hypericum perforatum have been frequently used to promote wound healing. While their effect on wound healing using preparations at pharmacological concentrations was supported by several in vitro and clinical studies, investigations of herbal homeopathic remedies on wound healing process are rare. The objective of this study was to investigate the effect of a commercial low potency homeopathic remedy Similasan® Arnica plus Spray on wound closure in a controlled, blind trial in vitro. Methods We investigated the effect of an ethanolic preparation composed of equal parts of Arnica montana 4x, Calendula officinalis 4x, Hypericum perforatum 4x and Symphytum officinale 6x (0712–2), its succussed hydroalcoholic solvent (0712–1) and unsuccussed solvent (0712–3) on NIH 3T3 fibroblasts. Cell viability was determined by WST-1 assay, cell growth using BrdU uptake, cell migration by chemotaxis assay and wound closure by CytoSelect ™Wound Healing Assay Kit which generated a defined “wound field”. All assays were performed in three independent controlled experiments. Results None of the three substances affected cell viability and none showed a stimulating effect on cell proliferation. Preparation (0712–2) exerted a stimulating effect on fibroblast migration (31.9%) vs 14.7% with succussed solvent (0712–1) at 1:100 dilutions (p < 0.001). Unsuccussed solvent (0712–3) had no influence on cell migration (6.3%; p > 0.05). Preparation (0712–2) at a dilution of 1:100 promoted in vitro wound closure by 59.5% and differed significantly (p < 0.001) from succussed solvent (0712–1), which caused 22.1% wound closure. Conclusion Results of this study showed that the low potency homeopathic remedy (0712–2) exerted in vitro wound closure potential in NIH 3T3 fibroblasts. This effect resulted from stimulation of fibroblasts motility rather than of their mitosis.

Finnish Miners versus Ivy League Capitalists

Finnish immigrants were recruited to work in the copper mines of Michigan by Boston capitalists intimately associated with Harvard. Boston capitalists defined the culture of capitalism in the United States. They extended their culture across the continent as they acquired mines and railroads. Finnish workers encountered Ivy League capitalism in Michigan, Minnesota, Idaho, Montana, Wyoming, Colorado, Utah and Arizona—often with the same interrelated group of capitalists. The two groups continually met in explosive confrontations in Montana, Michigan, Minnesota, and Arizona. To the Ivy League capitalists, Finns were terrorists who threatened the American social order. For the Finns, it was a war for social justice. In my presentation, I will trace the experience of Finnish workers in corporations controlled by Ivy League capitalists from the first strike at Calumet & Hecla in 1873 to the Red Scare of 1919-1921.

Finnish Americans and the Farm Revolt of the 1930s

Farm protest in the United States attracted widespread attention in the 1930s as militant farmers interfered with foreclosure sales, demonstrated at county court houses and state capitals, and blocked highways and stopped trains to prevent crops and livestock from going to market in an effort to raise farm prices. The best known of the protest groups was the Farmers Holiday Association, which was formed in 1932. Prior to the Holiday, however, a left-wing group organized by Communists in 1930 known as the United Farmers League (UFL) gained an initial following in the cutover country of the Upper Peninsula of Michigan, northern Wisconsin, northern Minnesota, and parts of the Dakotas and northeast Montana. Finnish Americans dominated the UFL in the Upper Midwest and in a few locales in the Dakotas. Evidence for this high level of influence comes from the fact that the head of the Communist Party’s Agrarian Department was Henry Puro, a key figure in Finnish American Communist circles and a member of the Party’s Politburo. This paper will focus on Finnish American involvement in the UFL and, to a lesser extent, the broader-based Farmers Holiday movement.

Towards greater accuracy in individual-tree mortality regression

Background mortality is an essential component of any forest growth and yield model. Forecasts of mortality contribute largely to the variability and accuracy of model predictions at the tree, stand and forest level. In the present study, I implement and evaluate state-of-the-art techniques to increase the accuracy of individual tree mortality models, similar to those used in many of the current variants of the Forest Vegetation Simulator, using data from North Idaho and Montana. The first technique addresses methods to correct for bias induced by measurement error typically present in competition variables. The second implements survival regression and evaluates its performance against the traditional logistic regression approach. I selected the regression calibration (RC) algorithm as a good candidate for addressing the measurement error problem. Two logistic regression models for each species were fitted, one ignoring the measurement error, which is the “naïve” approach, and the other applying RC. The models fitted with RC outperformed the naïve models in terms of discrimination when the competition variable was found to be statistically significant. The effect of RC was more obvious where measurement error variance was large and for more shade-intolerant species. The process of model fitting and variable selection revealed that past emphasis on DBH as a predictor variable for mortality, while producing models with strong metrics of fit, may make models less generalizable. The evaluation of the error variance estimator developed by Stage and Wykoff (1998), and core to the implementation of RC, in different spatial patterns and diameter distributions, revealed that the Stage and Wykoff estimate notably overestimated the true variance in all simulated stands, but those that are clustered. Results show a systematic bias even when all the assumptions made by the authors are guaranteed. I argue that this is the result of the Poisson-based estimate ignoring the overlapping area of potential plots around a tree. Effects, especially in the application phase, of the variance estimate justify suggested future efforts of improving the accuracy of the variance estimate. The second technique implemented and evaluated is a survival regression model that accounts for the time dependent nature of variables, such as diameter and competition variables, and the interval-censored nature of data collected from remeasured plots. The performance of the model is compared with the traditional logistic regression model as a tool to predict individual tree mortality. Validation of both approaches shows that the survival regression approach discriminates better between dead and alive trees for all species. In conclusion, I showed that the proposed techniques do increase the accuracy of individual tree mortality models, and are a promising first step towards the next generation of background mortality models. I have also identified the next steps to undertake in order to advance mortality models further.

Reflection, refraction, and rejection : copper smelting heritage and the execution of environmental policy

This dissertation examines the global technological and environmental history of copper smelting and the conflict that developed between historic preservation and environmental remediation at major copper smelting sites in the United States after their productive periods ended. Part I of the dissertation is a synthetic overview of the history of copper smelting and its environmental impact. After reviewing the basic metallurgy of copper ores, the dissertation contains successive chapters on the history of copper smelting to 1640, culminating in the so-called German, or Continental, processing system; on the emergence of the rival Welsh system during the British industrial revolution; and on the growth of American dominance in copper production the late 19th and early 20th centuries. The latter chapter focuses, in particular, on three of the most important early American copper districts: Michigan’s Keweenaw Peninsula, Tennessee’s Copper Basin, and Butte-Anaconda, Montana. As these three districts went into decline and ultimately out of production, they left a rich industrial heritage and significant waste and pollution problems generated by increasingly more sophisticated technologies capable of commercially processing steadily growing volumes of decreasingly rich ores. Part II of the dissertation looks at the conflict between historic preservation and environmental remediation that emerged locally and nationally in copper districts as they went into decline and eventually ceased production. Locally, former copper mining communities often split between those who wished to commemorate a region’s past importance and develop heritage tourism, and local developers who wished to clear up and clean out old industrial sites for other purposes. Nationally, Congress passed laws in the 1960s and 1970s mandating the preservation of historical resources (National Historic Preservation Act) and laws mandating the cleanup of contaminated landscapes (CERCLA, or Superfund), objectives sometimes in conflict – especially in the case of copper smelting sites. The dissertation devotes individual chapters to the conflicts that developed between environmental remediation, particularly involving the Environmental Protection Agency and the heritage movement in the Tennessee, Montana, and Michigan copper districts. A concluding chapter provides a broad model to illustrate the relationship between industrial decline, federal environmental remediation activities, and the growth of heritage consciousness in former copper mining and smelting areas, analyzes why the outcome varied in the three areas, and suggests methods for dealing with heritage-remediation issues to minimize conflict and maximize heritage preservation.

Copper Commando Index – vol. 1

Index for volume 1 (Aug. 1942-Aug. 1945) lists personal names, places, subjects; page and issue numbers.

Copper Commando Index – vol. 2

Index for volume 2 (Aug. 1942-Aug. 1945) lists personal names, places, subjects; page and issue numbers.