Who participates in R&D subsidy programs? The case of spanish manufacturing firms.

Empirical evidence on the effectiveness of R&D subsidies to firms has produced mixed results so far. One possible explanation is that firms and project selection rules may be quite heterogeneous both across agencies and across industries, leading to different outcomes in terms of the induced additional private effort. Here we focus on the participation stage. Using a sample of Spanish firms, we test for differences across agencies and industries. Our results suggest that firms in the same industry face different hurdles to participate in different agencies’ programs, that participation patterns may reflect a combination of agency goals, and that patterns differ across high-tech and low-tech industries.

New business formation and employment growth: some evidence for the Spanish manufacturing industry

This paper explores the effects of new business formation on employment growth in Spanish manufacturing industries. New firms are believed to make an important contribution to economic growth but the extent of this contribution is unclear. We consider time lags of new firm formation as explanatory variables of employment change and identify how long the effect of new firm entries on employment lasts. Our main results show that the effects of new business formation are positive in the short term, negative in the medium term and positive in the long term, thus confirming the existence of indirect supply-side effects found in similar studies for other countries. Key words: regional growth, firm entry, time lags and Spanish economy. JEL classifications: L00, L60, R11, R12

Technical innovations at the service of cheaper labour in pre-industrial Europe. The Enlightened agenda to transform the gender division of labour in silk manufacturing

In 1749, Jacques de Vaucanson patented his or tour pour tirer la soie or spindle for silk reeling. In that same year he presented his invention to the Academy of the Sciences in Paris, of which he was a member1. Jacques de Vaucanson was born in Grenoble, France, in 1709, and died in Paris in 1782. In 1741 he had been appointed inspector of silk manufactures by Louis XV. He set about reorganizing the silk industry in France, in considerable difficulty at the time due to foreign competition. Given Vaucanson’s position, his invention was intended to replace the traditional Piémontes method, and had an immediate impact upon the silk industry in France and all over Europe.

Agglomeration and location: a nonparametric approach

The aim of this article is to assess the effects of several territorial characteristics, specifically agglomeration economies, on industrial location processes in the Spanish region of Catalonia. Theoretically, the level of agglomeration causes economies which favour the location of new establishments, but an excessive level of agglomeration might cause diseconomies, since congestion effects arise. The empirical evidence on this matter is inconclusive, probably because the models used so far are not suitable enough. We use a more flexible semiparametric specification, which allows us to study the nonlinear relationship between the different types of agglomeration levels and location processes. Our main statistical source is the REIC (Catalan Manufacturing Establishments Register), which has plant-level microdata on location of new industrial establishments. Keywords: agglomeration economies, industrial location, Generalized Additive Models, nonparametric estimation, count data models.

Does abdominoplasty with liposuction of the love handles yield a shorter scar? An analysis with abdominal 3D laser scanning.

The aim of this study was to evaluate the combination of abdominoplasty with liposuction of both flanks with regards to length of scar, complications, and patient's satisfaction. A retrospective analysis of 35 patients who underwent esthetic abdominoplasty at our institution between 2002 and 2004 was performed. Thirteen patients underwent abdominoplasty with liposuction of both flanks, 22 patients underwent conventional abdominoplasty. Liposuction of the flanks did not increase the rate of complications of the abdominoplasty procedures. We found a tendency toward shorter scars in patients who underwent abdominoplasty combined with liposuction of the flanks. Implementation of 3-dimensional laser surface scanning to objectify the postoperative outcomes, documented a comparable degree of flatness of the achieved body contouring in both procedures. 3-dimensional laser surface scanning can be a valuable tool to objectify assessment of postoperative results.

Prototipus de visualització d’informació vitivinícola en 3D

iii. El projecte final a consistit en la creació prototipus de SIG (Sistema d’informació Geogràfica) per l’empresa T-Systems. El sistema desenvolupat es troba format per un conjunt de serveis web 3D utilitzant ArcGIS Server 9.2, amb la informació de les parcel•les vitivinícoles del Priorat (Catalunya), i un client personalitzat a les necessitats de l’usuari final, utilitzant ArcGIS Explorer 410. Per programar les eines personalitzades s’ha utilitzat Visual Studio 2005 (Visual Basic .NET).

Art en tres dimensions: construcció de renders 3D amb renders 3D studio max

Treball de recerca realitzat per un alumne d’ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l’any 2008. Existeixen diversos programes informàtics per a la generació d’imatges en format 3D. S’analitza breument l’oferta del mercat actual de la tecnologia de programari més emprada en la producció de gràfics 3D amb ordinador, identificant les vessants positives i negatives de cadascun. Posteriorment s’examina en profunditat el programa 3D Studio Max, per tal de conèixer-ne les eines de creació d’escenes virtuals i les seves funcionalitats. Finalment s’han desenvolupat projectes d’escenaris 3D en els quals es puguin aplicar els coneixements tècnics obtinguts en la recerca, sempre conceptualitzant aquestes propostes amb un cert criteri artístic.

Productivity growth and competition in Spanish manufacturing firms: What has happened in recent years?

This paper addresses the issue of the relationship between productivity and market competition. In comparison to the economies of other European countries, the Spanish economy has been growing, while productivity growth has stagnated. Here we provide empirical evidence about the relationship between productivity and market competition from Spanish manufacturing firms at firm level between 1994 and 2004. Correcting for selection bias, our study pays special attention to the patterns of productivity growth between openness and non-openness firms. When market competition increases the effect on firms operating in domestic markets is positive but when the level of competition is high incentives to invest in innovation and productivity gains disappear. The empirical relationship between competition and productivity is an inverted U-shape, where productivity growth is highest at intermediate levels of competition. The productivity growth of firms operating in international markets is higher than that of non-openness firms, but when market competition rises they moderate their productivity growth. Our empirical results suggest that the correct competition policy in the Spanish economy should remove the barriers to competition in internal markets in order to increase the incentives for manufacturing firms to invest in innovation and productivity growth.

The Estimation of Technical Efficiency Effects Models with an Example Applied to the Thai Manufacturing Sector

This paper does two things. First, it presents alternative approaches to the standard methods of estimating productive efficiency using a production function. It favours a parametric approach (viz. the stochastic production frontier approach) over a nonparametric approach (e.g. data envelopment analysis); and, further, one that provides a statistical explanation of efficiency, as well as an estimate of its magnitude. Second, it illustrates the favoured approach (i.e. the ‘single stage procedure’) with estimates of two models of explained inefficiency, using data from the Thai manufacturing sector, after the crisis of 1997. Technical efficiency is modelled as being dependent on capital investment in three major areas (viz. land, machinery and office appliances) where land is intended to proxy the effects of unproductive, speculative capital investment; and both machinery and office appliances are intended to proxy the effects of productive, non-speculative capital investment. The estimates from these models cast new light on the five-year long, post-1997 crisis period in Thailand, suggesting a structural shift from relatively labour intensive to relatively capital intensive production in manufactures from 1998 to 2002.

Two different 3D biogeochemical models for the NW mediterranean sea: validation with Meris data and intercomparison

Report for the scientific sojourn carried out at the University of New South Wales from February to June the 2007. Two different biogeochemical models are coupled to a three dimensional configuration of the Princeton Ocean Model (POM) for the Northwestern Mediterranean Sea (Ahumada and Cruzado, 2007). The first biogeochemical model (BLANES) is the three-dimensional version of the model described by Bahamon and Cruzado (2003) and computes the nitrogen fluxes through six compartments using semi-empirical descriptions of biological processes. The second biogeochemical model (BIOMEC) is the biomechanical NPZD model described in Baird et al. (2004), which uses a combination of physiological and physical descriptions to quantify the rates of planktonic interactions. Physical descriptions include, for example, the diffusion of nutrients to phytoplankton cells and the encounter rate of predators and prey. The link between physical and biogeochemical processes in both models is expressed by the advection-diffusion of the non-conservative tracers. The similarities in the mathematical formulation of the biogeochemical processes in the two models are exploited to determine the parameter set for the biomechanical model that best fits the parameter set used in the first model. Three years of integration have been carried out for each model to reach the so called perpetual year run for biogeochemical conditions. Outputs from both models are averaged monthly and then compared to remote sensing images obtained from sensor MERIS for chlorophyll.

The Changing Inter-Industry Wage Structure of the Organised Manufacturing Sector in India, 1973-74 to 2003-04

This study examines the inter-industry wage structure of the organised manufacturing sector in India for the period 1973-74 to 2003-04 by estimating the growth of average real wages for production workers by industry. In order to estimate the growth rates, the study adopts a methodological framework that differs from other studies in that the time series properties of the concerned variables are closely considered in order to obtain meaningful estimates of growth that are unbiased and (asymptotically) efficient. Using wage data on 51 manufacturing industries at three digit level of the National Industrial Classification 1998 (India), our estimation procedure obtains estimates of growth of real wages per worker that are deterministic in nature by accounting for any potential structural break(s). Our findings show that the inter-industry wage structure in India has changed a lot in the period 1973-74 to 2003-04 and that it provides some evidence that the inter-industry wage differences have become more pronounced in the post-reforms period. Thus this paper provides new evidence from India on the need to consider the hypothesis that industry affiliation is potentially an important determinant of wages when studying any relationship between reforms and wages.

3D geoelectrical monitoring to follow hydric soil behaviour during rainfall

RESUME Durant les dernières années, les méthodes électriques ont souvent été utilisées pour l'investigation des structures de subsurface. L'imagerie électrique (Electrical Resistivity Tomography, ERT) est une technique de prospection non-invasive et spatialement intégrée. La méthode ERT a subi des améliorations significatives avec le développement de nouveaux algorithmes d'inversion et le perfectionnement des techniques d'acquisition. La technologie multicanale et les ordinateurs de dernière génération permettent la collecte et le traitement de données en quelques heures. Les domaines d'application sont nombreux et divers: géologie et hydrogéologie, génie civil et géotechnique, archéologie et études environnementales. En particulier, les méthodes électriques sont souvent employées dans l'étude hydrologique de la zone vadose. Le but de ce travail est le développement d'un système de monitorage 3D automatique, non- invasif, fiable, peu coûteux, basé sur une technique multicanale et approprié pour suivre les variations de résistivité électrique dans le sous-sol lors d'événements pluvieux. En raison des limitations techniques et afin d'éviter toute perturbation physique dans la subsurface, ce dispositif de mesure emploie une installation non-conventionnelle, où toutes les électrodes de courant sont placées au bord de la zone d'étude. Le dispositif le plus approprié pour suivre les variations verticales et latérales de la résistivité électrique à partir d'une installation permanente a été choisi à l'aide de modélisations numériques. Les résultats démontrent que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle et plus apte à détecter les variations latérales et verticales de la résistivité électrique, et cela malgré la configuration non-conventionnelle des électrodes. Pour tester l'efficacité du système proposé, des données de terrain ont été collectées sur un site d'étude expérimental. La technique de monitorage utilisée permet de suivre le processus d'infiltration 3D pendant des événements pluvieux. Une bonne corrélation est observée entre les résultats de modélisation numérique et les données de terrain, confirmant par ailleurs que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle. La nouvelle technique de monitorage 3D de résistivité électrique permet de caractériser les zones d'écoulement préférentiel et de caractériser le rôle de la lithologie et de la pédologie de manière quantitative dans les processus hydrologiques responsables d'écoulement de crue. ABSTRACT During the last years, electrical methods were often used for the investigation of subsurface structures. Electrical resistivity tomography (ERT) has been reported to be a useful non-invasive and spatially integrative prospecting technique. The ERT method provides significant improvements, with the developments of new inversion algorithms, and the increasing efficiency of data collection techniques. Multichannel technology and powerful computers allow collecting and processing resistivity data within few hours. Application domains are numerous and varied: geology and hydrogeology, civil engineering and geotechnics, archaeology and environmental studies. In particular, electrical methods are commonly used in hydrological studies of the vadose zone. The aim of this study was to develop a multichannel, automatic, non-invasive, reliable and inexpensive 3D monitoring system designed to follow electrical resistivity variations in soil during rainfall. Because of technical limitations and in order to not disturb the subsurface, the proposed measurement device uses a non-conventional electrode set-up, where all the current electrodes are located near the edges of the survey grid. Using numerical modelling, the most appropriate arrays were selected to detect vertical and lateral variations of the electrical resistivity in the framework of a permanent surveying installation system. The results show that a pole-dipole array has a better resolution than a pole-pole array and can successfully follow vertical and lateral resistivity variations despite the non-conventional electrode configuration used. Field data are then collected at a test site to assess the efficiency of the proposed monitoring technique. The system allows following the 3D infiltration processes during a rainfall event. A good correlation between the results of numerical modelling and field data results can be observed since the field pole-dipole data give a better resolution image than the pole-pole data. The new device and technique makes it possible to better characterize the zones of preferential flow and to quantify the role of lithology and pedology in flood- generating hydrological processes.