930 resultados para ANTIBACTERIAL
Resumo:
Prodigiosin is known for its immunomodulatory, antibacterial, antimycotic, antimalarial, algicidal and anticancer activities. Here, we reported the evaluation of prodigiosin pigment as a dyeing agent in rubber latex, paper and polymethyl methacrylate (PMMA) so that it can be considered as an alternative to synthetic pigments. Maximum color shade was obtained in rubber sheet prepared with 0.5 parts per hundred gram of rubber (phr) pigment and PMMA sheet incorporated with 0.08 μg pigment. Results indicate scope for utilization of prodigiosin as dye for PMMA and rubber and also prodigiosin dyed paper as a pH indicator. Further, being a natural and water insoluble pigment, it is ecofriendly
Resumo:
The study was carried out to understand the effect of silver-silica nanocomposite (Ag-SiO2NC) on the cell wall integrity, metabolism and genetic stability of Pseudomonas aeruginosa, a multiple drugresistant bacterium. Bacterial sensitivity towards antibiotics and Ag-SiO2NC was studied using standard disc diffusion and death rate assay, respectively. The effect of Ag-SiO2NC on cell wall integrity was monitored using SDS assay and fatty acid profile analysis while the effect on metabolism and genetic stability was assayed microscopically, using CTC viability staining and comet assay, respectively. P. aeruginosa was found to be resistant to β-lactamase, glycopeptidase, sulfonamide, quinolones, nitrofurantoin and macrolides classes of antibiotics. Complete mortality of the bacterium was achieved with 80 μgml-1 concentration of Ag-SiO2NC. The cell wall integrity reduced with increasing time and reached a plateau of 70 % in 110 min. Changes were also noticed in the proportion of fatty acids after the treatment. Inside the cytoplasm, a complete inhibition of electron transport system was achieved with 100 μgml-1 Ag-SiO2NC, followed by DNA breakage. The study thus demonstrates that Ag-SiO2NC invades the cytoplasm of the multiple drug-resistant P. aeruginosa by impinging upon the cell wall integrity and kills the cells by interfering with electron transport chain and the genetic stability
Resumo:
The Cochin estuary (CE), which is one of the largest wetland ecosystems, extends from Thanneermukkam bund in the south to Azhikode in the north. It functions as an effluent repository for more than 240 industries, the characteristics of which includes fertilizer, pesticide, radioactive mineral processing, chemical and allied industries, petroleum refining and heavy metal processing industries (Thyagarajan, 2004). Studies in the CE have been mostly on the spatial and temporal variations in the physical, chemical and biological characteristics of the estuary (Balachandran et al., 2006; Madhu et al., 2007; Menon et al., 2000; Qasim 2003;Qasim and Gopinathan 1969) . Although several monitoring programs have been initiated in the CE to understand the level of heavy metal pollution, these were restricted to trace metals distribution (Balachandran et al., 2005) or the influence of anthropogenic inputs on the benthos and phytoplankton (Madhu et al., 2007;Jayaraj, 2006). Recently, few studies were carried out on microbial ecology in the CE(Thottathil et al 2008a and b;Parvathi et al., 2009and 2011; Thomas et al., 2006;Chandran and Hatha, 2003). However, studies on metal - microbe interaction are hitherto not undertaken in this estuary. Hence, a study was undertaken at 3 sites with different level of heavy metal concentration tounderstand the abundance, diversity and mechanisms of resistance in metal resistant bacteria and its impact on the nutrient regeneration. The present work has also focused on the response of heavy metal resistant bacteria towards antibacterial agent’s antibiotics and silver nanoparticles
Resumo:
A nanocomposite is a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers (nm), or structures having nano-scale repeat distances between the different phases that make up the material. In the broadest sense this definition can include porous media, colloids, gels and copolymers, but is more usually taken to mean the solid combination of a bulk matrix and nano-dimensional phase(s) differing in properties due to dissimilarities in structure and chemistry. The mechanical, electrical, thermal, optical, electrochemical, catalytic properties of the nanocomposite will differ markedly from that of the component materials. Size limits for these effects have been proposed, <5 nm for catalytic activity, <20 nm for making a hard magnetic material soft, <50 nm for refractive index changes, and <100 nm for achieving superparamagnetism, mechanical strengthening or restricting matrix dislocation movement. Conducting polymers have attracted much attention due to high electrical conductivity, ease of preparation, good environmental stability and wide variety of applications in light-emitting, biosensor chemical sensor, separation membrane and electronic devices. The most widely studied conducting polymers are polypyrrole, polyaniline, polythiophene etc. Conducting polymers provide tremendous scope for tuning of their electrical conductivity from semiconducting to metallic region by way of doping and are organic electro chromic materials with chemically active surface. But they are chemically very sensitive and have poor mechanical properties and thus possessing a processibility problem. Nanomaterial shows the presence of more sites for surface reactivity, they possess good mechanical properties and good dispersant too. Thus nanocomposites formed by combining conducting polymers and inorganic oxide nanoparticles possess the good properties of both the constituents and thus enhanced their utility. The properties of such type of nanocomposite are strongly depending on concentration of nanomaterials to be added. Conducting polymer composites is some suitable composition of a conducting polymer with one or more inorganic nanoparticles so that their desirable properties are combined successfully. The composites of core shell metal oxide particles-conducting polymer combine the electrical properties of the polymer shell and the magnetic, optical, electrical or catalytic characteristics of the metal oxide core, which could greatly widen their applicability in the fields of catalysis, electronics and optics. Moreover nanocomposite material composed of conducting polymers & oxides have open more field of application such as drug delivery, conductive paints, rechargeable batteries, toners in photocopying, smart windows, etc.The present work is mainly focussed on the synthesis, characterization and various application studies of conducting polymer modified TiO2 nanocomposites. The conclusions of the present work are outlined below, Mesoporous TiO2 was prepared by the cationic surfactant P123 assisted hydrothermal synthesis route and conducting polymer modified TiO2 nanocomposites were also prepared via the same technique. All the prepared systems show XRD pattern corresponding to anatase phase of TiO2, which means that there is no phase change occurring even after conducting polymer modification. Raman spectroscopy gives supporting evidence for the XRD results. It also confirms the incorporation of the polymer. The mesoporous nature and surface area of the prepared samples were analysed by N2 adsorption desorption studies and the mesoporous ordering can be confirmed by low angle XRD measurementThe morphology of the prepared samples was obtained from both SEM & TEM. The elemental analysis of the samples was performed by EDX analysisThe hybrid composite formation is confirmed by FT-IR spectroscopy and X-ray photoelectron spectroscopyAll the prepared samples have been used for the photocatalytic degradation of dyes, antibiotic, endocrine disruptors and some other organic pollutants. Photocatalytic antibacterial activity studies were also performed using the prepared systemsAll the prepared samples have been used for the photocatalytic degradation of dyes, antibiotic, endocrine disruptors and some other organic pollutants. Photocatalytic antibacterial activity studies were also performed using the prepared systems Polyaniline modified TiO2 nanocomposite systems were found to have good antibacterial activity. Thermal diffusivity studies of the polyaniline modified systems were carried out using thermal lens technique. It is observed that as the amount of polyaniline in the composite increases the thermal diffusivity also increases. The prepared systems can be used as an excellent coolant in various industrial purposes. Nonlinear optical properties (3rd order nonlinearity) of the polyaniline modified systems were studied using Z scan technique. The prepared materials can be used for optical limiting Applications. Lasing studies of polyaniline modified TiO2 systems were carried out and the studies reveal that TiO2 - Polyaniline composite is a potential dye laser gain medium.
Resumo:
Andrographis paniculata, commonly known as Kalmegh, is used both in Ayurvedic and Unani system of medicines because of its immunological, antibacterial and hepatoprotective properties. This study was carried out to investigate the influence of four harvesting times (120,135,150 days after planting and at seed maturity) and four planting distances (30×15, 30×10, 20×15 and 20×10 cm) on growth, dry herbage biomass, seed yield and quality traits of Andrographis paniculata at CCS Haryana Agricultural University, Hisar, India in the two years 2005 and 2006. The treatments were laid out in a split plot design with three replications. The maximum values for dry herbage biomass yield (5.14 t ha^(-1)), net returns (760.00 EUR ha^(-1)), B:C ratio (2.59), andrographolide content (2.63%) and total yield (135.00 kg ha^(-1)) were detected 135 days after planting with an optimum planting distance of 30×15 cm. However, the maximum iron content was estimated 120 days after planting. The highest dry herbage (4.58 t ha^(-1)) and maximum seed yield (19.7 kg ha^(-1)) were registered at plants that were lined out with a distance of 20×10 cm.
Resumo:
En Colombia el manejo de pacientes en los diferentes servicios hospitalarios han presentado inconvenientes en el combate de infecciones por bacterias y la resistencia de las mismas; el Staphylococcus aureus Escherichia coli y Pseudomonas aeruginosa, han demostrado evolución en la creación de generaciones resistentes y también han participado junto con la Salmonella y el B.cereus en brotes por ETAS como principales microorganismos causales. En el presente estudio se analizó el aceite esencial de la Conobea scoparioides para evaluar su actividad frente a cinco cepas bacterianas. Se obtuvo el AE y se prepararon las bacterias aplicándose pruebas de sensibilidad y no paramétricas para determinar el porcentaje de inhibición, la evaluación de la MIC y comparar la efectividad del aceite vs la estreptomicina. El aceite esencial presentó actividad principalmente contra el B. cereus con el mayor % de inhibición y una MIC de 3.2 ug/ml, caso diferente presentó P. aeruginosa con un % de crecimiento por encima del 50% presentando una MIC de 16.7 ug/ml. Finalmente podemos concluir que se presentó mayor actividad frente a bacterias gram positivas como el caso del B. cereus que en gram negativas con MIC bajas. Estos resultados permite comparar la actividad de la conobea con estudios recientes bajo la misma modalidad que permiten identificar nuevas plantas con actividad biológica y percibir que la conobea es efectiva en mayor proporción frente a bacterias gram positivas.
Resumo:
New hetaryl- and alkylidenerhodanine derivatives 3a-d, 3e, and 4a-d were prepared from heterocyclic aldehydes 1a-d or acetaldehyde 1e. The treatment of several rhodanine derivatives 3a-d and 3e with piperidine or morpholine in THF under reflux, afforded (Z)-5-(hetarylmethylidene)-2-(piperidin-1-yl) thiazol-4(5H)-ones and 2-morpholinothiazol-4(5H)-ones 5a-d, 6a-d, and (Z)-5-ethylidene-2-morpholinothiazol-4(5H)-one (5e), respectively, in good yields. Structures of all compounds were determined by IR, 1D and 2D NMR and mass spectrometry. Several of these compounds were screened by the U.S. National Cancer Institute (NCI) to assess their antitumor activity against 60 different human tumor cell lines. Compound 3c showed high activity against HOP-92 (Non-Small Cell Lung Cancer), which was the most sensitive cell line, with GI(50) = 0.62 mu M and LC50 > 100 mu M from the in vitro assays. In vitro antifungal activity of these compounds was also determined against 10 fungal strains. Compound 3e showed activity against all fungal strains tested, but showed high activity against Saccharomyces cerevisiae (MIC 3.9 mu g/mL).
Resumo:
El aumento en la resistencia bacteriana es un problema global que afecta también a nuestro país y que puede llevar a fracasos terapéuticos, peores desenlaces clínicos, uso de terapia combinada, mayor riesgo de interacciones medicamentosas y de reacciones adversas asi como a aumento de los costos del tratamiento. Tigeciclina, un nuevo antibiótico de la clase de las glicilciclinas ha mostrado una promisoria actividad antibacteriana in vitro contra bacterias comunes incluyendo multiresistentes que cada vez son más prevalentes en nuestro país especialmente a nivel hospitalario. Este estudio fue desarrollado para determinar la actividad de tigeciclina en nuestro medio y conocer su potencial utilidad.
Resumo:
Aquesta tesi doctoral està basada en el desenvolupament de nous agents antimicrobians derivats del pèptid híbrid cecropina A-melitina WKLFKKILKVL-NH2 (Pep3) que siguin sostenibles i útils per al control de malalties de plantes. Es van dissenyar i sintetitzar més de 133 anàlegs de Pep3 mitjançant química combinatòria. Es van obtenir anàlegs de Pep3 amb una elevada activitat contra fitopatògens i que presentaven baixa toxicitat. Els millors anàlegs van presentar eficàcies comparables amb pesticides de referència en la prevenció d'infeccions causades per fitopatògens. Es va estudiar el mecanisme d'acció de KKLFKKILKYL-NH2 (BP100) investigant la seva interacció amb models de membrana mitjançant tècniques espectroscòpiques. Es va observar la capacitat de BP100 a induir la permeabilització, la neutralització, i l'agregació de vesícules lipídiques aniòniques a una determinada concentració llindar. Es va deduir una equació que relaciona la CMI d'un pèptid antimicrobià amb la constant de partició i la concentració llindar en la membrana.
Resumo:
O uso de plantas medicinais é uma tendência generalizada na medicina popular. O género Plectranthus pertence à família das Lamiaceae tal como a salva (Salvia), o manjericão (Ocimum) e a hortelã (Mentha), que apresentam uma grande diversidade de usos etnobotânicos. No presente trabalho, foram avaliadas as atividades antimicrobiana e antioxidante de extractos de cinco espécies do género Plectranthus: P. hadiensis (vd), P. madagascarensis, P. neochilus, P. verticillatus e P. barbatus. Os extractos foram obtidos por diversos métodos: infusão, decocção, ultra-sons, micro-ondas e maceração (10% m/v de planta seca) com dois solventes diferentes (água e acetona). O método de infusão permitiu obter a maior quantidade de extrato seco a partir da planta Plectranthus barbatus (22 ± 1,0 – 33 ± 3,0 mg/mL). A actividade antimicrobiana dos extratos obtidos foi determinada usando o método da difusão em poço e foi testada contra três bactérias Gram-positivas e duas bactérias Gram-negativas. Só os extratos acetónicos de P. madagascarensis, P. verticillatus e P. hadiensis (vd) demonstraram ser ativos e exclusivamente em bactérias Gram-positivas. O extrato de P. madagascarensis demonstrou a maior actividade antibacteriana com halos de inibição entre 23 e 36 mm. A atividade antioxidante dos extratos foi determinada qualitativamente usando o método do radical 2,2-difenil-1-picril-hidrazina (DPPH) em ccd obtiveram-se resultados positivos na maioria dos extractos estudados.
Resumo:
Wydział Chemii: Pracownia Chemii Bioorganicznej
Resumo:
Surfactin is a bacterial lipopeptide produced by Bacillus subtilis and is a powerful surfactant, having also antiviral, antibacterial and antitumor properties. The recovery and purification of surfactin from complex fermentation broths is a major obstacle to its commercialization; therefore, a two-step membrane filtration process was developed using a lab scale tangential flow filtration (TFF) unit with 10 kDa MWCO regenerated cellulose (RC) and polyethersulfone (PES)membranes at three different transmembrane pressure (TMP) of 1.5 bar, 2.0 bar and 2.5 bar. Two modes of filtrations were studied, with and without cleaning of membranes prior to UF-2. In a first step of ultrafiltration (UF-1), surfactin was retained effectively by membranes at above its critical micelle concentration (CMC); subsequently in UF-2, the retentate micelles were disrupted by addition of 50% (v/v) methanol solution to allow recovery of surfactin in the permeate. Main protein contaminants were effectively retained by the membrane in UF-2. Flux of permeates, rejection coefficient (R) of surfactin and proteinwere measured during the filtrations. Overall the three different TMPs applied have no significant effect in the filtrations and PES is the more suitable membrane to selectively separate surfactin from fermentation broth, achieving high recovery and level of purity. In addition this two-step UF process is scalable for larger volume of samples without affecting the original functionality of surfactin, although membranes permeability can be affected due to exposure to methanolic solution used in UF-2.
Recovery and purification of surfactin from fermentation broth by a two-step ultrafiltration process
Resumo:
Surfactin is a bacterial lipopeptide produced by Bacillus subtilis and it is a powerful surfactant, having also antiviral, antibacterial and antitumor properties. The recovery and purification of surfactin from complex fermentation broths is a major obstacle to its commercialization; therefore, two-step membrane filtration processes were evaluated using centrifugal and stirred cell devices while the mechanisms of separation were investigated by particle size and surface charge measurements. In a first step of ultrafiltration (UF-1), surfactin was retained effectively by membranes at above its critical micelle concentration (CMC); subsequently in UF-2, the retentate micelles were disrupted by addition of 50% (v/v) methanol solution to allow recovery of surfactin in the permeate. Main protein contaminants were effective]), retained by the membrane in UF-2. Ultrafiltration was carried out either using centrifugal devices with 30 and 10 kDa MWCO regenerated cellulose membranes, or a stirred cell device with 10 kDa MWCO polyethersulfone (PES) and regenerated cellulose (RC) membranes. Total rejection of surfactin was consistently observed in UF-1, while in UF-2 PES membranes had the lowest rejection coefficient of 0.08 +/- 0.04. It was found that disruption of surfactin micelles, aggregation of protein contaminants and electrostatic interactions in UF-2 can further improve the selectivity of the membrane based purification technique. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
Antioxidant properties in food are dependent on various parameters. These include the pH value and interactions with food components, including proteins or metal ions. food components affect antioxidant stability and also influence the properties of microorganisms and their viability. This paper describes an investigation of the effect of pH on the antioxidant and antibacterial properties of caffeic acid in different media. The pH values studied, using an oil-in-water emulsion as model system, were 3, 5 (with and without phosphate buffer), and 9. Effects of mixtures of caffeic acid, bovine serum albumin (BSA), and Fe (III) on oxidative deterioration in the emulsion samples were studied. The results show that the antioxidant activity of caffeic acid was increased by the presence of BSA. This effect was pH dependent and was affected by the presence of iron Ions. Antibacterial properties were also pH dependent. The minimum concentration of caffeic acid required to inhibit some microorganisms in the pH range of 5 to 7 was determined. A concentration of 0.41% (w/w) caffeic acid was enough to inhibit the growth of some of the studied microorganisms in the pH range of 5 to 7. However, near-neutral pH concentrations higher than 0.4% were needed to inhibit some microorganisms, including Listeria monocytogenes, E. coli, and Staphylococcus aureus, in the medium.
Resumo:
As part of an on-going project to characterize compounds from immature conifer cones with antibacterial or modulatory activity against multidrug-resistant (MDR) strains of Staphylococcus aureus, eight compounds were isolated from the cones of Chatnaecyparis lawsoniana. The active compounds were mainly diterpenes, with minimum inhibitory concentrations ranging from 4 to 128 mu g/ml against MDR effluxing S. aureus strains and two epidemic methicillin-resistant (EMRSA) clinical isolates. The compounds extracted were the diterpenes ferruginol, pisiferol and its epimer 5-epipisiferol, formosanoxide, trans-communic acid and torulosal, the sesquiterpene oplopanonyl acetate and the germacrane 4 beta-hydroxygermacra-1(10)-5-diene. Some of these compounds also exhibited modulatory activity in potentiating antibiotic activity against effluxing strains and ferruginol, used at a sub-inhibitory concentration, resulted in an 80-fold potentiation of oxacillin activity against strain EMRSA-15. An efflux inhibition assay using an S. aureus strain possessing the MDR NorA efflux pump resulted in 40% inhibition of ethidium bromide efflux at 10 mu M ferruginol (2.86 mu g/ml). We report the H-1 and C-13 NMR data for the cis A/B ring junction epimer of pisiferol which we have named 5-epipisiferol. We also unambiguously assign all H-1 and C-13 NMR resonances for trans-communic acid. (c) 2006 Elsevier Ltd. All rights reserved.