Thermoelektrische und strukturelle Eigenschaften gefüllter Skutterudite, sowie Verbesserung ihres Gütefaktors durch Nanostrukturierung

Gefüllte Skutterudite mit der Summenformel MxCo4Sb12 sind vielversprechende thermoelektrische Materialien. Die Standardsynthese führt jedoch oft zur Bildung von MSbx, Sb, CoSb oder CoSb2 als Nebenphasen. In dieser Arbeit wird eine neue zweistufige Synthese vorgestellt, bei der die Bildung des Kieftits (CoSb3) getrennt von dem topotaktischen Füllen mit dem Metallatom M erfolgt. Dieser Ansatz erlaubt eine Durchführung der Reaktion bei niedrigeren Temperaturen mit kürzeren Reaktionszeiten. Ein geringer Antimon-Unterschuss im so erhaltenen Kieftit erhöht die Anzahl der Ladungsträger und unterdrückt die Bildung von Verunreinigungsphasen. Zunächst wurden Skutteruditproben mit der nominellen Zusammensetzung InxCo4Sb12 mit x = 0,12; 0,15; 0,18 und 0,20 in hoher Reinheit hergestellt und mit Spark Plasma Sintering (SPS) kompaktiert. Messaufnahmen mit Potential- und Seebeck-Mikrosonde und Rasterelektronenmikroskop zeigten eine hohe Probenhomogenität. Produkte waren nahezu phasenrein, was eine Untersuchung der Transporteigenschaften ohne Verfälschung durch Nebenphasen ermöglichte. Die quantitative Phasenanalyse mittels Synchrotron-Beugungsdaten zeigte < 0,1 % InSb bei In0,18Co4Sb12 und In0,20Co4Sb12, sowie eine lineare Korrelation zwischen dem wahren Füllgrad und der Gitterkonstante. Die Bindung von < 0,1 % InSb verringerte den Füllgrad der nominellen In0,20Co4Sb12-Probe auf x = 0,144. Die nominelle In0,18Co4Sb12-Probe mit dem wahren Gehalt x = 0,160 hatte den höchsten zT-Wert nahe eins bei 420 °C. Es konnte anschließend die Anwendbarkeit der Synthesemethode für Barium- und mehrfach gefüllte (Na+In) Skutterudite gezeigt werden. Die Na-gefüllte Probe war gegenüber der thermischen Behandlung in der SPS oder der Charakterisierung instabil. Alle Verbindungen wurden gesintert und ihre Transporteigenschaften wurden charakterisiert. Des weiterem wurde der Einfluss der Konzentration der Korngrenzen bei den Mischungen von zu Nanomaßstab vermahlenem In0,18Co4Sb12 (Partikelgrößen zwischen 20 und 100 nm) mit dem ursprünglichen Bulk untersucht. Proben mit verschiedenen Anteilen von Nanopulver wurden gesintert, ihre thermoelektrischen und strukturellen Eigenschaften wurden untersucht. Die Gütezahl zT von 1,39 bei 375 °C wurde bei der Probe mit gleichen Anteilen des Nano- und des unbehandelten Pulvers erreicht. Die Komposite mit Anteilen <10 % oder >75 % des Nanopulvers zeigten keine Verbesserung gegenüber der unbehandelten Verbindung.rn

Optische Experimente zur Untersuchung der Nichtgleichgewichtsdynamik kolloidaler Suspensionen

In der vorliegenden Forschungsarbeit wird die Konkurrenz von Kristallisation und Verglasung in metastabilen kolloidalen Hart-Kugel(HK)-Modellsystemen mit dynamischer und zeitaufgelöster statischer Lichtstreuung untersucht. Durch gleichzeitige Messungen mit beiden Methoden an derselben Probe gelang es, mit hoher Genauigkeit und aussagekräftiger Statistik nachzuweisen, dass in beiden Systemklassen eine starke Korrelation der strukturellen und dynamischen Eigenschaften vorliegt und diese Korrelation zu quantifizieren. Ein zentraler Teil der Arbeit bestand in dem Aufbau einer geeigneten Lichtstreuanlage mit der erstmalig Messungen der Dynamik und der Struktur simultan an derselben nicht-ergodischen Probe durchgeführt werden konnten. Für die dynamische Lichtstreuung wurde ein Flächendetektor (CCD-Kamera) verwendet. In Kombination mit einer speziellen Detektionsoptik ermöglicht dies, die gleichzeitige Detektion von Streulicht aus unterschiedlichen Probenbereichen (Subensembles). Damit kann gleichzeitig die Dynamik in unterschiedlichen Subensembles mit einer Auflösung von 15,8x15,8µm2 untersucht werden. Die Lichtstreuanlage wurde ausführlich charakterisiert und ihre korrekte Funktionsweise mithilfe von Vergleichsmessungen an etablierten Lichtstreuanlagen bestätigt. Die zeitliche Entwicklung der Dynamik und der Struktur von metastabilen Proben wurde unterhalb, am und oberhalb des Glasübergangs quantifiziert. Dabei zeigte das untersuchte kolloidale HK-Modellsystem alle typischen Eigenschaften eines HK-Systems. Die kristallisierenden Proben zeigten das etablierte zweistufige Kristallisationsszenario mit entsprechender Kristallisationskinetik und die Glasproben zeigten das erwartete Alterungsverhalten. Bei dem zweistufigen Kristallisationsszenario kommt es zuerst zur Nukleation einer metastabilen Zwischenphase von sogenannten Precursorn. In einer zweiten Stufe bilden sich Kristallite innerhalb dieser Precursor. Durch Vergleich zwischen kristallisierenden und verglasenden Proben konnte auch während der Verglasung die Bildung von Precursorn beobachtet werden. Die Korrelation zwischen der Anzahl an Precursorn und der Partikeldynamik legt die Vermutung nahe, dass das immer noch unverstandene Phänomen der Alterung von Gläsern mit der Bildung von Precursorn zusammenhängt. Verhinderte Kristallisation führt zu einer starken Verlangsamung der Partikeldynamik. Die Partikeldynamik einer Probe am Glasübergang zeigt, dass die Probe vor Einsetzen der Kristallisation eine glasartige Dynamik aufwies. Dies legt die Vermutung nahe, dass einkomponentige kolloidale HK-Gläser den Gleichgewichtszustand (Kristall) auf langen Zeitskalen erreichen können. Durch die Untersuchung der Partikeldynamik von metastabilen Proben in einzelnen Subensembles konnte eine heterogene Verteilung der Partikeldynamik nachgewiesen werden. Es existieren Bereiche, in denen die Partikeldynamik schneller oder langsamer ist als in anderen Bereichen. Gleichzeitig zeigen die Messungen der strukturellen Eigenschaften, dass metastabile Proben auch heterogen bezüglich ihrer Struktur sind. Mithilfe dieser Messungen konnte die zeitliche Entwicklung des Anteils an langsamen Partikeln und des Anteils an Partikeln innerhalb von Objekten höherer Ordnung (Precursor/Kristallite) bestimmt werden. Es zeigte sich eine direkte Korrelation zwischen dem Anteil an langsamen Partikeln und dem Anteil an Partikeln in Objekten höherer Ordnung. Die Untersuchung der Dynamik und der Struktur in einzelnen Subensembles lieferte einen weiteren Hinweis darauf, dass Subensembles, in denen eine stärker ausgeprägte strukturelle Ordnung vorliegt, auch bevorzugt eine langsamere Partikeldynamik aufweisen.

Next-state comfort in learning a vertical stick transportation sequence

Over the last decade, the end-state comfort effect (e.g., Rosenbaum et al., 2006) has received a considerable amount of attention. However, some of the underlying mechanisms are still to be investigated, amongst others, how sequential planning affects end-state comfort and how this effect develops over learning. In a two-step sequencing task, e.g., postural comfort can be planned on the intermediate position (next state) or on the actual end position (final state). It might be hypothesized that, in initial acquisition, next state’s comfort is crucial for action planning but that, in the course of learning, final state’s comfort is taken more and more into account. To test this hypothesis, a variant of Rosenbaum’s vertical stick transportation task was used. Participants (N = 16, right-handed) received extensive practice on a two-step transportation task (10,000 trials over 12 sessions). From the initial position on the middle stair of a staircase in front of the participant, the stick had to be transported either 20 cm upwards and then 40 cm downwards or 20 cm downwards and then 40 cm upwards (N = 8 per subgroup). Participants were supposed to produce fluid movements without changing grasp. In the pre- and posttest, participants were tested on both two-step sequencing tasks as well as on 20 cm single-step upwards and downwards movements (10 trials per condition). For the test trials, grasp height was calculated kinematographically. In the pretest, large end/next/final-state comfort effects for single-step transportation tasks and large next-state comfort effects for sequenced tasks were found. However, no change in grasp height from pre- to posttest could be revealed. Results show that, in vertical stick transportation sequences, the final state is not taken into account when planning grasp height. Instead, action planning seems to be solely based on aspects of the next action goal that is to be reached.

Retrospective analysis of stored dried blood spots from children with cystic fibrosis and matched controls to assess the performance of a proposed newborn screening protocol in Switzerland

Newborn screening (NBS) for Cystic Fibrosis (CF) has been introduced in many countries, but there is no ideal protocol suitable for all countries. This retrospective study was conducted to evaluate whether the planned two step CF NBS with immunoreactive trypsinogen (IRT) and 7 CFTR mutations would have detected all clinically diagnosed children with CF in Switzerland.

Conformationally Controlled Electron Delocalization in n-Type Rods: Synthesis, Structure, and Optical, Electrochemical, and Spectroelectrochemical Properties of Dicyanocyclophanes

A series of dicyanobiphenyl-cyclophanes 1-6 with various pi-backbone conformations and characteristic n-type semiconductor properties is presented. Their synthesis, optical, structural, electrochemical, spectroelectrochemical, and packing properties are investigated. The X-ray crystal structures of all n-type rods allow the systematic correlation of structural features with physical properties. In addition, the results are supported by quantum mechanical calculations based on density functional theory. A two-step reduction process is observed for all n-type rods, in which the first step is reversible. The potential gap between the reduction processes depends linearly on the cos(2) value of the torsion angle phi between the pi-systems. Similarly, optical absorption spectroscopy shows that the vertical excitation energy of the conjugation band correlates with the cos(2) value of the torsion angle phi. These correlations demonstrate that the fixed intramolecular torsion angle phi is the dominant factor determining the extent of electron delocalization in these model compounds, and that the angle phi measured in the solid-state structure is a good proxy for the molecular conformation in solution. Spectroelectrochemical investigations demonstrate that conformational rigidity is maintained even in the radical anion form. In particular, the absorption bands corresponding to the SOMO-LUMO+i transitions are shifted bathochromically, whereas the absorption bands corresponding to the HOMO-SOMO transition are shifted hypsochromically with increasing torsion angle phi.

Structural aspects of redox-mediated electron tunneling (Dedicated to the memory of professor Alexander M. Kuznetsov)

We investigated structural aspects of electron transfer (ET) in tunneling junctions (Au(1 1 1)vertical bar FcN vertical bar solution gap vertical bar Au STM tip) with four different redox-active N-thioalk(ano)ylferrocenes (FcN) embedded. The investigated molecules consist of a redox-active ferrocene (Fc) moiety connected via alkyl spacers with N = 4, 6, 8 and 11 carbon atoms to a thiol anchoring group. We found that for short FcNs (N = 4, 6,8) the redox-mediated ET response increases with the increase of the alkyl chain length, while no enhancement of the ET was observed for Fc1 1. The model of two-step ET with partial vibrational relaxation by Kuznetsov and Ulstrup was used to rationalize these results. The theoretical ET steps were assigned to two processes: (1) electron tunneling from the Fc group to the Au tip through the electrolyte layer and (2) electron transport from the Au(1 1 1) substrate to the Fc group through the organic adlayer. We argue that for the three short FcNs, the first process represents the rate-limiting step. The increase of the length of the alkyl chain leads to an approach of the Fc group to the STM tip, and consequently accelerates the first El' step. In case of the Fcl 1 junctions the rather high thickness of the organic layer leads to a decrease of the rate of the second ET step. In consequence, the contribution of the redox-mediated current enhancement to the total tunneling current appears to be insignificant. Our work demonstrates the importance of combined structural and transport approaches for the understanding of Er processes in electrochemical nanosystems. (C) 2010 Elsevier B.V. All rights reserved.

Plasma PCSK9 concentrations during an oral fat load and after short term high-fat, high-fat high-protein and high-fructose diets

Background PCSK9 (Proprotein Convertase Subtilisin Kexin type 9) is a circulating protein that promotes hypercholesterolemia by decreasing hepatic LDL receptor protein. Under non interventional conditions, its expression is driven by sterol response element binding protein 2 (SREBP2) and follows a diurnal rhythm synchronous with cholesterol synthesis. Plasma PCSK9 is associated to LDL-C and to a lesser extent plasma triglycerides and insulin resistance. We aimed to verify the effect on plasma PCSK9 concentrations of dietary interventions that affect these parameters. Methods We performed nutritional interventions in young healthy male volunteers and offspring of type 2 diabetic (OffT2D) patients that are more prone to develop insulin resistance, including: i) acute post-prandial hyperlipidemic challenge (n=10), ii) 4 days of high-fat (HF) or high-fat/high-protein (HFHP) (n=10), iii) 7 (HFruc1, n=16) or 6 (HFruc2, n=9) days of hypercaloric high-fructose diets. An acute oral fat load was also performed in two patients bearing the R104C-V114A loss-of-function (LOF) PCSK9 mutation. Plasma PCSK9 concentrations were measured by ELISA. For the HFruc1 study, intrahepatocellular (IHCL) and intramyocellular lipids were measured by 1H magnetic resonance spectroscopy. Hepatic and whole-body insulin sensitivity was assessed with a two-step hyperinsulinemic-euglycemic clamp (0.3 and 1.0 mU.kg-1.min-1). Findings HF and HFHP short-term diets, as well as an acute hyperlipidemic oral load, did not significantly change PCSK9 concentrations. In addition, post-prandial plasma triglyceride excursion was not altered in two carriers of PCSK9 LOF mutation compared with non carriers. In contrast, hypercaloric 7-day HFruc1 diet increased plasma PCSK9 concentrations by 28% (p=0.05) in healthy volunteers and by 34% (p=0.001) in OffT2D patients. In another independent study, 6-day HFruc2 diet increased plasma PCSK9 levels by 93% (p<0.0001) in young healthy male volunteers. Spearman’s correlations revealed that plasma PCSK9 concentrations upon 7-day HFruc1 diet were positively associated with plasma triglycerides (r=0.54, p=0.01) and IHCL (r=0.56, p=0.001), and inversely correlated with hepatic (r=0.54, p=0.014) and whole-body (r=−0.59, p=0.0065) insulin sensitivity. Conclusions Plasma PCSK9 concentrations vary minimally in response to a short term high-fat diet and they are not accompanied with changes in cholesterolemia upon high-fructose diet. Short-term high-fructose intake increased plasma PCSK9 levels, independent on cholesterol synthesis, suggesting a regulation independent of SREBP-2. Upon this diet, PCSK9 is associated with insulin resistance, hepatic steatosis and plasma triglycerides.

Hepatocellular toxicity of clopidogrel: Mechanisms and risk factors

Clopidogrel is a prodrug used widely as a platelet aggregation inhibitor. After intestinal absorption, approximately 90% is converted to inactive clopidogrel carboxylate and 10% via a two-step procedure to the active metabolite containing a mercapto group. Hepatotoxicity is a rare but potentially serious adverse reaction associated with clopidogrel. The aim of this study was to find out the mechanisms and susceptibility factors for clopidogrel-associated hepatotoxicity. In primary human hepatocytes, clopidogrel (10 and 100μM) was cytotoxic only after cytochrome P450 (CYP) induction by rifampicin. Clopidogrel (10 and 100μM) was also toxic for HepG2 cells expressing human CYP3A4 (HepG2/CYP3A4) and HepG2 cells co-incubated with CYP3A4 supersomes (HepG2/CYP3A4 supersome), but not for wild-type HepG2 cells (HepG2/wt). Clopidogrel (100μM) decreased the cellular glutathione content in HepG2/CYP3A4 supersome and triggered an oxidative stress reaction (10 and 100µM) in HepG2/CYP3A4, but not in HepG2/wt. Glutathione depletion significantly increased the cytotoxicity of clopidogrel (10 and 100µM) in HepG2/CYP3A4 supersome. Co-incubation with 1μM ketoconazole or 10mM glutathione almost completely prevented the cytotoxic effect of clopidogrel in HepG2/CYP3A4 and HepG2/CYP3A4 supersome. HepG2/CYP3A4 incubated with 100μM clopidogrel showed mitochondrial damage and cytochrome c release, eventually promoting apoptosis and/or necrosis. In contrast to clopidogrel, clopidogrel carboxylate was not toxic for HepG2/wt or HepG2/CYP3A4 up to 100µM. In conclusion, clopidogrel incubated with CYP3A4 is associated with the formation of metabolites that are toxic for hepatocytes and can be trapped by glutathione. High CYP3A4 activity and low cellular glutathione stores may be risk factors for clopidogrel-associated hepatocellular toxicity.

[In Process Citation]

Elevated transaminases in asymptomatic patients can be detected in more than 5 % of the investigations. If there are no obvious reasons, the finding should be confirmed within the next 3 months. Frequent causes are non-alcoholic fatty liver disease (NAFLD), non-alcoholic steatohepatitis (NASH), alcohol, hepatitis B or C, hemochromatosis and drugs or toxins. Rarer causes are autoimmune hepatitis, M. Wilson and α1-antitrypsine deficiency. There are also non-hepatic causes such as celiac disease or hemolysis and myopathies in the case of an exclusive increase of ASAT. I recommend a two-step investigational procedure; the more frequent causes are examined first before the rare causes are studied. The value of the proposed investigations is discussed.

Effectively Selecting a Target Population for a Future Comparative Study

When comparing a new treatment with a control in a randomized clinical study, the treatment effect is generally assessed by evaluating a summary measure over a specific study population. The success of the trial heavily depends on the choice of such a population. In this paper, we show a systematic, effective way to identify a promising population, for which the new treatment is expected to have a desired benefit, using the data from a current study involving similar comparator treatments. Specifically, with the existing data we first create a parametric scoring system using multiple covariates to estimate subject-specific treatment differences. Using this system, we specify a desired level of treatment difference and create a subgroup of patients, defined as those whose estimated scores exceed this threshold. An empirically calibrated group-specific treatment difference curve across a range of threshold values is constructed. The population of patients with any desired level of treatment benefit can then be identified accordingly. To avoid any ``self-serving'' bias, we utilize a cross-training-evaluation method for implementing the above two-step procedure. Lastly, we show how to select the best scoring system among all competing models. The proposals are illustrated with the data from two clinical trials in treating AIDS and cardiovascular diseases. Note that if we are not interested in designing a new study for comparing similar treatments, the new procedure can also be quite useful for the management of future patients who would receive nontrivial benefits to compensate for the risk or cost of the new treatment.

Glycoprotein VI is a major collagen receptor for platelet activation: it recognizes the platelet-activating quaternary structure of collagen, whereas CD36, glycoprotein IIb/IIIa, and von Willebrand factor do not

Simple collagen-related peptides (CRPs) containing a repeat Gly-Pro-Hyp sequence are highly potent platelet agonists. Like collagen, they must exhibit tertiary (triple-helical) and quaternary (polymeric) structure to activate platelets. Platelet signaling events induced by the peptides are the same as most of those induced by collagen. The peptides do not recognize the alpha 2 beta 1 integrin. To identify the signaling receptor involved, we have evaluated the response to the CRP, Gly-Lys-Hyp(Gly-Pro-Hyp)10-Gly-Lys-Hyp-Gly of platelets with defined functional deficiencies. These studies exclude a primary recognition role for CD36, von Willebrand factor (vWF), or glycoprotein (GP) IIb/IIIa. Thus, both CD36 and vWF-deficient platelets exhibited normal aggregation, normal fibrinogen binding, and normal expression of CD62 and CD63, measured by flow cytometry, in response to the peptide, and there was normal expression of CD62 and CD63 on thrombasthenic platelets. In contrast, GPVI-deficient platelets were totally unresponsive to the peptide, indicating that this receptor recognizes the Gly-Pro-Hyp sequence in collagen. GPVI-deficient platelets showed some fibrinogen binding in response to collagen but failed to aggregate and to express CD62 and CD63. Collagen, but not CRP-XL, contains binding sites for alpha 2 beta 1. Therefore, it is possible that collagen still induces some signaling via alpha 2 beta 1, leading to activation of GPIIb/IIIa. Our findings are consistent with a two-site, two-step model of collagen interaction with platelets involving recognition of specific sequences in collagen by an adhesive receptor such as alpha 2 beta 1 to arrest platelets under flow and subsequent recognition of another specific collagen sequence by an activatory receptor, namely GPVI.

Crystal structure of the platelet glycoprotein Ib(alpha) N-terminal domain reveals an unmasking mechanism for receptor activation

Glycoprotein Ib (GPIb) is a platelet receptor with a critical role in mediating the arrest of platelets at sites of vascular damage. GPIb binds to the A1 domain of von Willebrand factor (vWF-A1) at high blood shear, initiating platelet adhesion and contributing to the formation of a thrombus. To investigate the molecular basis of GPIb regulation and ligand binding, we have determined the structure of the N-terminal domain of the GPIb(alpha) chain (residues 1-279). This structure is the first determined from the cell adhesion/signaling class of leucine-rich repeat (LRR) proteins and reveals the topology of the characteristic disulfide-bonded flanking regions. The fold consists of an N-terminal beta-hairpin, eight leucine-rich repeats, a disulfide-bonded loop, and a C-terminal anionic region. The structure also demonstrates a novel LRR motif in the form of an M-shaped arrangement of three tandem beta-turns. Negatively charged binding surfaces on the LRR concave face and anionic region indicate two-step binding kinetics to vWF-A1, which can be regulated by an unmasking mechanism involving conformational change of a key loop. Using molecular docking of the GPIb and vWF-A1 crystal structures, we were also able to model the GPIb.vWF-A1 complex.

ATP modeling of internal transformer faults for relay performance testing

Transformers are very important elements of any power system. Unfortunately, they are subjected to through-faults and abnormal operating conditions which can affect not only the transformer itself but also other equipment connected to the transformer. Thus, it is essential to provide sufficient protection for transformers as well as the best possible selectivity and sensitivity of the protection. Nowadays microprocessor-based relays are widely used to protect power equipment. Current differential and voltage protection strategies are used in transformer protection applications and provide fast and sensitive multi-level protection and monitoring. The elements responsible for detecting turn-to-turn and turn-to-ground faults are the negative-sequence percentage differential element and restricted earth-fault (REF) element, respectively. During severe internal faults current transformers can saturate and slow down the speed of relay operation which affects the degree of equipment damage. The scope of this work is to develop a modeling methodology to perform simulations and laboratory tests for internal faults such as turn-to-turn and turn-to-ground for two step-down power transformers with capacity ratings of 11.2 MVA and 290 MVA. The simulated current waveforms are injected to a microprocessor relay to check its sensitivity for these internal faults. Saturation of current transformers is also studied in this work. All simulations are performed with the Alternative Transients Program (ATP) utilizing the internal fault model for three-phase two-winding transformers. The tested microprocessor relay is the SEL-487E current differential and voltage protection relay. The results showed that the ATP internal fault model can be used for testing microprocessor relays for any percentage of turns involved in an internal fault. An interesting observation from the experiments was that the SEL-487E relay is more sensitive to turn-to-turn faults than advertized for the transformers studied. The sensitivity of the restricted earth-fault element was confirmed. CT saturation cases showed that low accuracy CTs can be saturated with a high percentage of turn-to-turn faults, where the CT burden will affect the extent of saturation. Recommendations for future work include more accurate simulation of internal faults, transformer energization inrush, and other scenarios involving core saturation, using the newest version of the internal fault model. The SEL-487E relay or other microprocessor relays should again be tested for performance. Also, application of a grounding bank to the delta-connected side of a transformer will increase the zone of protection and relay performance can be tested for internal ground faults on both sides of a transformer.

DESIGN AND SYNTHESIS OF MULTIFUNCTIONAL POLYMERIC MICELLES FOR GENE-DIRECTED ENZYME PRODRUG THERAPY

Gene-directed enzyme prodrug therapy is a form of cancer therapy in which delivery of a gene that encodes an enzyme is able to convert a prodrug, a pharmacologically inactive molecule, into a potent cytotoxin. Currently delivery of gene and prodrug is a two-step process. Here, we propose a one-step method using polymer nanocarriers to deliver prodrug, gene and cytotoxic drug simultaneously to malignant cells. Prodrugs acyclovir, ganciclovir and 5-doxifluridine were used to directly to initiate ring-opening polymerization of epsilon-caprolactone, forming a hydrophobic prodrug-tagged poly(epsilon-caprolactone) which was further grafted with hydrophilic polymers (methoxy poly(ethylene glycol), chitosan or polyethylenemine) to form amphiphilic copolymers for micelle formation. Successful synthesis of copolymers and micelle formation was confirmed by standard analytical means. Conversion of prodrugs to their cytotoxic forms was analyzed by both two-step and one-step means i.e. by first delivering gene plasmid into cell line HT29 and then challenging the cells with the prodrug-tagged micelle carriers and secondly by complexing gene plasmid onto micelle nanocarriers and delivery gene and prodrug simultaneously to parental HT29 cells. Anticancer effectiveness of prodrug-tagged micelles was further enhanced by encapsulating chemotherapy drugs doxorubicin or SN-38. Viability of colon cancer cell line HT29 was significantly reduced. Furthermore, in an effort to develop a stealth and targeted carrier, CD47-streptavidin fusion protein was attached onto the micelle surface utilizing biotin-streptavidin affinity. CD47, a marker of self on the red blood cell surface, was used for its antiphagocytic efficacy, results showed that micelles bound with CD47 showed antiphagocytic efficacy when exposed to J774A.1 macrophages. Since CD47 is not only an antiphagocytic ligand but also an integrin associated protein, it was used to target integrin alpha(v)beta(3), which is overexpressed on tumor-activated neovascular endothelial cells. Results showed that CD47-tagged micelles had enhanced uptake when treated to PC3 cells which have high expression of alpha(v)beta(3). The synthesized multifunctional polymeric micelle carriers developed could offer a new platform for an innovative cancer therapy regime.

Highly Efficient Non-palladium Catalyzed Controlled Synthesis and X-ray Analysis of Functionalized 1,2-Diaryl-, 1,2,3-Triaryl- and 1,2,3,4-Tetraarylbenzene

A general, two-step highly efficient synthesis of 1,2-diaryl-, 1,2,3-triaryl- and 1,2,3,4-tetraarylbenzenes from simple stitching of alpha-oxo-ketene-S,S-acetals and active methylene compounds via a ‘lactone intermediate’ is described. This procedure offers easy access to highly functionalized arylated-benzenes containing sterically demanding groups in good to excellent yields. The novelty of the procedure lies in the fabrication of aromatic compounds with desired conformational flexibility along the molecular axis in a transition metal-free environment through easily accessible precursors. The crystal analysis of these arylated-benzene scaffolds showed that the peripheral aryl rings are arranged in propeller-like fashion with respect to the central benzene rings. Examination of the crystal packing in the structure of a 1,2,3,4-tetraarylbenzene 12c revealed a “N…pi interaction” between molecules related by a two-fold screw axis running in a direction. It is interesting that the repeat of the array of N…pi interaction around the axis of the 1,2,3,4-tetraarylbenzene 12c enforces the molecules in a helical pattern.