Study of particle movement in the nearshore region of Lake Superior with radioisotope tracers

Biogeochemical processes in the coastal region, including the coastal area of the Great Lakes, are of great importance due to the complex physical, chemical and biological characteristics that differ from those on either the adjoining land or open water systems. Particle-reactive radioisotopes, both naturally occurring (210Pb, 210Po and 7Be) and man-made (137Cs), have proven to be useful tracers for these processes in many systems. However, a systematic isotope study on the northwest coast of the Keweenaw Peninsula in Lake Superior has not yet been performed. In this dissertation research, field sampling, laboratory measurements and numerical modeling were conducted to understand the biogeochemistry of the radioisotope tracers and some particulate-related coastal processes. In the first part of the dissertation, radioisotope activities of 210Po and 210Pb in a variability of samples (dissolved, suspended particle, sediment trap materials, surficial sediment) were measured. A completed picture of the distribution and disequilibrium of this pair of isotopes was drawn. The application of a simple box model utilizing these field observations reveals short isotope residence times in the water column and a significant contribution of sediment resuspension (for both particles and isotopes). The results imply a highly dynamic coastal region. In the second part of this dissertation, this conclusion is examined further. Based on intensive sediment coring, the spatial distribution of isotope inventories (mainly 210Pb, 137Cs and 7Be) in the nearshore region was determined. Isotope-based focusing factors categorized most of the sampling sites as non- or temporary depositional zones. A twodimensional steady-state box-in-series model was developed and applied to individual transects with the 210Pb inventories as model input. The modeling framework included both water column and upper sediments down to the depth of unsupported 210Pb penetration. The model was used to predict isotope residence times and cross-margin fluxes of sediments and isotopes at different locations along each transect. The time scale for sediment focusing from the nearshore to offshore regions of the transect was on the order of 10 years. The possibility of sediment longshore movement was indicated by high inventory ratios of 137Cs: 210Pb. Local deposition of fine particles, including fresh organic carbon, may explain the observed distribution of benthic organisms such as Diporeia. In the last part of this dissertation, isotope tracers, 210Pb and 210Po, were coupled into a hydrodynamic model for Lake Superior. The model was modified from an existing 2-D finite difference physical-biological model which has previously been successfully applied on Lake Superior. Using the field results from part one of this dissertation as initial conditions, the model was used to predict the isotope distribution in the water column; reasonable results were achieved. The modeling experiments demonstrated the potential for using a hydrodynamic model to study radioisotope biogeochemistry in the lake, although further refinements are necessary.

Short-term response of the Ca cycle of a montane forest in Ecuador to low experimental CaCl 2 additions

The tropical montane forests of the E Andean cordillera in Ecuador receive episodic Sahara-dust inputs particularly increasing Ca deposition. We added CaCl2 to isolate the effect of Ca deposition by Sahara dust to tropical montane forest from the simultaneously occurring pH effect. We examined components of the Ca cycle at four control plots and four plots with added Ca (2 × 5 kg ha–1 Ca annually as CaCl2) in a random arrangement. Between August 2007 and December 2009 (four applications of Ca), we determined Ca concentrations and fluxes in litter leachate, mineral soil solution (0.15 and 0.30 m depths), throughfall, and fine litterfall and Al concentrations and speciation in soil solutions. After 1 y of Ca addition, we assessed fine-root biomass, leaf area, and tree growth. Only < 3% of the applied Ca leached below the acid organic layer (pH 3.5–4.8). The added CaCl2 did not change electrical conductivity in the root zone after 2 y. In the second year of fertilization, Ca retention in the canopy of the Ca treatment tended to decrease relative to the control. After 2 y, 21% of the applied Ca was recycled to soil with throughfall and litterfall. One year after the first Ca addition, fine-root biomass had decreased significantly. Decreasing fine-root biomass might be attributed to a direct or an indirect beneficial effect of Ca on the soil decomposer community. Because of almost complete association of Al with dissolved organic matter and high free Ca2+ : Al3+ activity ratios in solution of all plots, Al toxicity was unlikely. We conclude that the added Ca was retained in the system and had beneficial effects on some plants.

New Patterns of Democracy in the Countries of the Comparative Study of Electoral Systems

The chapter introduces a new database on political-institutional patterns of democracy used in the contributions to the book. It provides an update and extension of Lijphart’s (1999, 2012) measurement of consensus and majoritarian democracy for the countries of the second wave of the CSES during the period 1997–2006, using 11 partly improved indicators. The chapter explores patterns of democracy by the means of factor analysis, construct additive indices, and present the resulting country scores of consensus and majoritarian democracy graphically. Two variants are presented, one featuring Lijphart’s (1999) classic ‘executives–parties’ and ‘federal–unitary’ dimensions, and another incorporating direct democracy into the framework, yielding an additional ‘cabinets–direct democracy’ dimension

The expanding role of immunopharmacology: IUPHAR Review 16

Drugs targeting the immune system such as corticosteroids, antihistamines and immunosuppressants have been widely exploited in the treatment of inflammatory, allergic and autoimmune disorders during the second half of the 20th century. The recent advances in immunopharmacological research have made available new classes of clinically relevant drugs. These comprise protein kinase inhibitors and biologics, such as monoclonal antibodies, that selectively modulate the immune response not only in cancer and autoimmunity but also in a number of other human pathologies. Likewise, more effective vaccines utilizing novel antigens and adjuvants are valuable tools for the prevention of transmissible infectious diseases and for allergen-specific immunotherapy. Consequently, immunopharmacology is presently considered as one of the expanding fields of pharmacology. Immunopharmacology addresses the selective regulation of immune responses and aims to uncover and exploit beneficial therapeutic options for typical and non-typical immune system-driven unmet clinical needs. While in the near future a number of new agents will be introduced, improving the effectiveness and safety of those currently in use is imperative for all researchers and clinicians working in the fields of immunology, pharmacology and drug discovery. The newly formed ImmuPhar (http://iuphar.us/index.php/sections-subcoms/immunopharmacology) is the Immunopharmacology Section of the International Union of Basic and Clinical Pharmacology (IUPHAR, http://iuphar.us/). ImmuPhar provides a unique international expert-lead platform that aims to dissect and promote the growing understanding of immune (patho)physiology. Moreover, it challenges the identification and validation of drug targets and lead candidates for the treatment of many forms of debilitating disorders, including, among others, cancer, allergies, autoimmune and metabolic diseases.

The Chemical Mechanism of a Brown-Rot Decay Mimtic System and its Application in Paper Recycling Processes

This work is aimed at improving our current knowledge of the non-enzymatic inecl~anisins involved in brown-rot decay, as well as the exploration of potential applications of a brown-rot mimetic model system in paper recycling processes. The study was divided into two parts. The first part focussed on the chemical mechanisms involved in chelation and reduction of iron by a low molecular weight chelator (isolated from the brown-rot fungus Gloeophyllz~m tmbeum) and its model compound 2,3- dihydroxybenzoic acid (2,3-DHBA). Chelation as well as free radical generation mediated by this system were studied by ESR measurement. The results indicate that the effects of the chelator/iron ratio, the pH, and other reaction parameters on hydroxyl radical generation by a Fenton type system could be determined using ESR spin-trapping techniques. The results also support the hypothesis that superoxide radicals are involved in the chelator-mediated Fenton process. In the second part of the study, the effect of a chelator-mediated Fenton system for the improvement of deinking efficiency and the n~odification of fiber and paper properties was studied. For the deinking study, copy paper was laser printed with an identical standard pattern. Then repulping and flotation operations were performed to remove ink particles. Under properly controlled deinking conditions, the chelator mediated treatment (CMT) resulted in a reduction in dirt count over that of conventional deinking procedures with no significant loss of pulp strength. To study the effect of the chelator system treatment on the quality of pulp with different fines content, a fully bleached hardwood kraft pulp was beaten to different freeness levels and treated with the chelator-mediated free radical system. The result shows that virgin fiber and heavily beaten fiber respond differently to the free radical treatment. Unbeaten fibers become more flexible and easier to collapse after free radical treatment, while beaten fibers show a reduction in fines and small materials after mild free radical treatment.

Delineating the molecular basis of human genetic diseases: Epigenetic and functional studies

Identifying and characterizing the genes responsible for inherited human diseases will ultimately lead to a more holistic understanding of disease pathogenesis, catalyze new diagnostic and treatment modalities, and provide insights into basic biological processes. This dissertation presents research aimed at delineating the genetic and molecular basis of human diseases through epigenetic and functional studies and can be divided into two independent areas of research. The first area of research describes the development of two high-throughput melting curve based methods to assay DNA methylation, referred to as McMSP and McCOBRA. The goal of this project was to develop DNA methylation methods that can be used to rapidly determine the DNA methylation status at a specific locus in a large number of samples. McMSP and McCOBRA provide several advantages over existing methods, as they are simple, accurate, robust, and high-throughput making them applicable to large-scale DNA methylation studies. McMSP and McCOBRA were then used in an epigenetic study of the complex disease Ankylosing spondylitis (AS). Specifically, I tested the hypothesis that aberrant patterns of DNA methylation in five AS candidate genes contribute to disease susceptibility. While no statistically significant methylation differences were observed between cases and controls, this is the first study to investigate the hypothesis that epigenetic variation contributes to AS susceptibility and therefore provides the conceptual framework for future studies. ^ In the second area of research, I performed experiments to better delimit the function of aryl hydrocarbon receptor-interacting protein-like 1 (AIPL1), which when mutated causes various forms of inherited blindness such as Leber congenital amaurosis. A yeast two-hybrid screen was performed to identify putative AIPL1-interacting proteins. After screening 2 × 106 bovine retinal cDNA library clones, 6 unique putative AIPL1-interacting proteins were identified. While these 6 AIPL1 protein-protein interactions must be confirmed, their identification is an important step in understanding the functional role of AIPL1 within the retina and will provide insight into the molecular mechanisms underlying inherited blindness. ^

Lease Defaults and the Efficient Mitigation of Damages

The traditional law of leases imposed no duty on landlords to mitigate damages in the event of tenant breach, whereas the modern law of leases does. An economic model of leases, in which absentee tenants may or may not intend to breach, shows that the traditional rule promotes tenant investment in the property by discouraging landlord entry. In contrast, the modern rule prevents the property from being left idle by encouraging landlords to enter and re-let abandoned property. The model reflects the historic use of the traditional rule for agricultural leases, where absentee use was valuable, and the emergence of the modern rule for residential leases, where the primary use entails continuous occupation.

The Hospital Study of the City of Houston and Harris County

In 1941 the Texas Legislature appropriated $500,000 to the Board of Regents of the University of Texas to establish a cancer research hospital. The M. D. Anderson Foundation offered to match the appropriation with a grant of an equal sum and to provide a permanent site in Houston. In August, 1942 the Board of Regent of the University and the Trustees of the Foundation signed an agreement to embark on this project. This institution was to be the first one in the medical center, which was incorporated in October, 1945. The Board of Trustees of the Texas Medical Center commissioned a hospital survey to: - Define the needed hospital facilities in the area - Outline an integrated program to meet these needs - Define the facilities to be constructed - Prepare general recommendations for efficient progress The Hospital Study included information about population, hospitals, and other health care and education facilities in Houston and Harris County at that time. It included projected health care needs for future populations, education needs, and facility needs. It also included detailed information on needs for chronic illnesses, a school of public health, and nursing education. This study provides valuable information about the general population and the state of medicine in Houston and Harris County in the 1940s. It gives a unique perspective on the anticipated future as civic leaders looked forward in building the city and region. This document is critical to an understanding of the Texas Medical Center, Houston and medicine as they are today. SECTIONS INCLUDE: Abstract The Abstract was a summary of the 400 page document including general information about the survey area, community medical assets, and current and projected medical needs which the Texas Medical Center should meet. The 123 recommendations were both general (e.g., 12. “That in future planning, the present auxiliary department of the larger hospitals be considered inadequate to carry an added teaching research program of any sizable scope.”) and specific (e.g., 22. That 14.3% of the total acute bed requirement be allotted for obstetric care, reflecting a bed requirement of 522 by 1950, increasing to 1,173 by 1970.”) Section I: Survey Area This section basically addressed the first objective of the survey: “define the needed hospital facilities in the area.” Based on the admission statistics of hospitals, Harris County was included in the survey, with the recognition that growth from out-lying regional areas could occur. Population characteristics and vital statistics were included, with future trends discussed. Each of the hospitals in the area and government and private health organizations, such as the City-County Welfare Board, were documented. Statistics on the facilities use and capacity were given. Eighteen recommendations and observations on the survey area were given. Section II: Community Program This section basically addressed the second objective of the survey: “outline an integrated program to meet these needs.” The information from the Survey Area section formed the basis of the plans for development of the Texas Medical Center. In this section, specific needs, such as what medical specialties were needed, the location and general organization of a medical center, and the academic aspects were outlined. Seventy-four recommendations for these plans were provided. Section III: The Texas Medical Center The third and fourth objectives are addressed. The specific facilities were listed and recommendations were made. Section IV: Special Studies: Chronic Illness The five leading causes of death (heart disease, cancer, “apoplexy”, nephritis, and tuberculosis) were identified and statistics for morbidity and mortality provided. Diagnostic, prevention and care needs were discussed. Recommendations on facilities and other solutions were made. Section IV: Special Studies: School of Public Health An overview of the state of schools of public health in the US was provided. Information on the direction and need of this special school was also provided. Recommendations on development and organization of the proposed school were made. Section IV: Special Studies: Needs and Education Facilities for Nurses Nursing education was connected with hospitals, but the changes to academic nursing programs were discussed. The needs for well-trained nurses in an expanded medical environment were anticipated to result in significant increased demands of these professionals. An overview of the current situation in the survey area and recommendations were provided. Appendix A Maps, tables and charts provide background and statistical information for the previous sections. Appendix B Detailed census data for specific areas of the survey area in the report were included. Sketches of each of the fifteen hospitals and five other health institutions showed historical information, accreditations, staff, available facilities (beds, x-ray, etc.), academic capabilities and financial information.

Contribution to the quality improvement of the antenna measurement using post-processing techniques = Contribución a la mejora de la calidad de medida de antena usando técnicas de post-procesado

One important task in the design of an antenna is to carry out an analysis to find out the characteristics of the antenna that best fulfills the specifications fixed by the application. After that, a prototype is manufactured and the next stage in design process is to check if the radiation pattern differs from the designed one. Besides the radiation pattern, other radiation parameters like directivity, gain, impedance, beamwidth, efficiency, polarization, etc. must be also evaluated. For this purpose, accurate antenna measurement techniques are needed in order to know exactly the actual electromagnetic behavior of the antenna under test. Due to this fact, most of the measurements are performed in anechoic chambers, which are closed areas, normally shielded, covered by electromagnetic absorbing material, that simulate free space propagation conditions, due to the absorption of the radiation absorbing material. Moreover, these facilities can be employed independently of the weather conditions and allow measurements free from interferences. Despite all the advantages of the anechoic chambers, the results obtained both from far-field measurements and near-field measurements are inevitably affected by errors. Thus, the main objective of this Thesis is to propose algorithms to improve the quality of the results obtained in antenna measurements by using post-processing techniques and without requiring additional measurements. First, a deep revision work of the state of the art has been made in order to give a general vision of the possibilities to characterize or to reduce the effects of errors in antenna measurements. Later, new methods to reduce the unwanted effects of four of the most commons errors in antenna measurements are described and theoretical and numerically validated. The basis of all them is the same, to perform a transformation from the measurement surface to another domain where there is enough information to easily remove the contribution of the errors. The four errors analyzed are noise, reflections, truncation errors and leakage and the tools used to suppress them are mainly source reconstruction techniques, spatial and modal filtering and iterative algorithms to extrapolate functions. Therefore, the main idea of all the methods is to modify the classical near-field-to-far-field transformations by including additional steps with which errors can be greatly suppressed. Moreover, the proposed methods are not computationally complex and, because they are applied in post-processing, additional measurements are not required. The noise is the most widely studied error in this Thesis, proposing a total of three alternatives to filter out an important noise contribution before obtaining the far-field pattern. The first one is based on a modal filtering. The second alternative uses a source reconstruction technique to obtain the extreme near-field where it is possible to apply a spatial filtering. The last one is to back-propagate the measured field to a surface with the same geometry than the measurement surface but closer to the AUT and then to apply also a spatial filtering. All the alternatives are analyzed in the three most common near-field systems, including comprehensive noise statistical analyses in order to deduce the signal-to-noise ratio improvement achieved in each case. The method to suppress reflections in antenna measurements is also based on a source reconstruction technique and the main idea is to reconstruct the field over a surface larger than the antenna aperture in order to be able to identify and later suppress the virtual sources related to the reflective waves. The truncation error presents in the results obtained from planar, cylindrical and partial spherical near-field measurements is the third error analyzed in this Thesis. The method to reduce this error is based on an iterative algorithm to extrapolate the reliable region of the far-field pattern from the knowledge of the field distribution on the AUT plane. The proper termination point of this iterative algorithm as well as other critical aspects of the method are also studied. The last part of this work is dedicated to the detection and suppression of the two most common leakage sources in antenna measurements. A first method tries to estimate the leakage bias constant added by the receiver’s quadrature detector to every near-field data and then suppress its effect on the far-field pattern. The second method can be divided into two parts; the first one to find the position of the faulty component that radiates or receives unwanted radiation, making easier its identification within the measurement environment and its later substitution; and the second part of this method is able to computationally remove the leakage effect without requiring the substitution of the faulty component. Resumen Una tarea importante en el diseño de una antena es llevar a cabo un análisis para averiguar las características de la antena que mejor cumple las especificaciones fijadas por la aplicación. Después de esto, se fabrica un prototipo de la antena y el siguiente paso en el proceso de diseño es comprobar si el patrón de radiación difiere del diseñado. Además del patrón de radiación, otros parámetros de radiación como la directividad, la ganancia, impedancia, ancho de haz, eficiencia, polarización, etc. deben ser también evaluados. Para lograr este propósito, se necesitan técnicas de medida de antenas muy precisas con el fin de saber exactamente el comportamiento electromagnético real de la antena bajo prueba. Debido a esto, la mayoría de las medidas se realizan en cámaras anecoicas, que son áreas cerradas, normalmente revestidas, cubiertas con material absorbente electromagnético. Además, estas instalaciones se pueden emplear independientemente de las condiciones climatológicas y permiten realizar medidas libres de interferencias. A pesar de todas las ventajas de las cámaras anecoicas, los resultados obtenidos tanto en medidas en campo lejano como en medidas en campo próximo están inevitablemente afectados por errores. Así, el principal objetivo de esta Tesis es proponer algoritmos para mejorar la calidad de los resultados obtenidos en medida de antenas mediante el uso de técnicas de post-procesado. Primeramente, se ha realizado un profundo trabajo de revisión del estado del arte con el fin de dar una visión general de las posibilidades para caracterizar o reducir los efectos de errores en medida de antenas. Después, se han descrito y validado tanto teórica como numéricamente nuevos métodos para reducir el efecto indeseado de cuatro de los errores más comunes en medida de antenas. La base de todos ellos es la misma, realizar una transformación de la superficie de medida a otro dominio donde hay suficiente información para eliminar fácilmente la contribución de los errores. Los cuatro errores analizados son ruido, reflexiones, errores de truncamiento y leakage y las herramientas usadas para suprimirlos son principalmente técnicas de reconstrucción de fuentes, filtrado espacial y modal y algoritmos iterativos para extrapolar funciones. Por lo tanto, la principal idea de todos los métodos es modificar las transformaciones clásicas de campo cercano a campo lejano incluyendo pasos adicionales con los que los errores pueden ser enormemente suprimidos. Además, los métodos propuestos no son computacionalmente complejos y dado que se aplican en post-procesado, no se necesitan medidas adicionales. El ruido es el error más ampliamente estudiado en esta Tesis, proponiéndose un total de tres alternativas para filtrar una importante contribución de ruido antes de obtener el patrón de campo lejano. La primera está basada en un filtrado modal. La segunda alternativa usa una técnica de reconstrucción de fuentes para obtener el campo sobre el plano de la antena donde es posible aplicar un filtrado espacial. La última es propagar el campo medido a una superficie con la misma geometría que la superficie de medida pero más próxima a la antena y luego aplicar también un filtrado espacial. Todas las alternativas han sido analizadas en los sistemas de campo próximos más comunes, incluyendo detallados análisis estadísticos del ruido con el fin de deducir la mejora de la relación señal a ruido lograda en cada caso. El método para suprimir reflexiones en medida de antenas está también basado en una técnica de reconstrucción de fuentes y la principal idea es reconstruir el campo sobre una superficie mayor que la apertura de la antena con el fin de ser capaces de identificar y después suprimir fuentes virtuales relacionadas con las ondas reflejadas. El error de truncamiento que aparece en los resultados obtenidos a partir de medidas en un plano, cilindro o en la porción de una esfera es el tercer error analizado en esta Tesis. El método para reducir este error está basado en un algoritmo iterativo para extrapolar la región fiable del patrón de campo lejano a partir de información de la distribución del campo sobre el plano de la antena. Además, se ha estudiado el punto apropiado de terminación de este algoritmo iterativo así como otros aspectos críticos del método. La última parte de este trabajo está dedicado a la detección y supresión de dos de las fuentes de leakage más comunes en medida de antenas. El primer método intenta realizar una estimación de la constante de fuga del leakage añadido por el detector en cuadratura del receptor a todos los datos en campo próximo y después suprimir su efecto en el patrón de campo lejano. El segundo método se puede dividir en dos partes; la primera de ellas para encontrar la posición de elementos defectuosos que radian o reciben radiación indeseada, haciendo más fácil su identificación dentro del entorno de medida y su posterior substitución. La segunda parte del método es capaz de eliminar computacionalmente el efector del leakage sin necesidad de la substitución del elemento defectuoso.

Short-term response of the Ca cycle of a montane forest in Ecuador to low experimental CaCl2 additions

The tropical montane forests of the E Andean cordillera in Ecuador receive episodic Sahara- dust inputs particularly increasing Ca deposition. We added CaCl2 to isolate the effect of Ca deposition by Sahara dust to tropical montane forest from the simultaneously occurring pH effect. We examined components of the Ca cycle at four control plots and four plots with added Ca (2 × 5 kg ha?1 Ca annually as CaCl2) in a random arrangement. Between August 2007 and December 2009 (four applications of Ca), we determined Ca concentrations and fluxes in litter leachate, mineral soil solution (0.15 and 0.30 m depths), throughfall, and fine litterfall and Al con- centrations and speciation in soil solutions. After 1 y of Ca addition, we assessed fine-root bio- mass, leaf area, and tree growth. Only < 3% of the applied Ca leached below the acid organic layer (pH 3.5?4.8). The added CaCl2 did not change electrical conductivity in the root zone after 2 y. In the second year of fertilization, Ca retention in the canopy of the Ca treatment tended to decrease relative to the control. After 2 y, 21% of the applied Ca was recycled to soil with throughfall and litterfall. One year after the first Ca addition, fine-root biomass had decreased significantly. Decreasing fine-root biomass might be attributed to a direct or an indirect beneficial effect of Ca on the soil decomposer community. Because of almost complete association of Al with dissolved organic matter and high free Ca2+ : Al3+ activity ratios in solution of all plots, Al toxicity was unlikely. We conclude that the added Ca was retained in the system and had benefi- cial effects on some plants.

Business, development and inclusive supply chains. Exploring pathways for the sustainable incorporation of the poor as suppliers in agrifood supply chains

El panorama global está cambiando, y esto influye sobre la forma en la que entendemos y tratamos de alcanzar un desarrollo humano sostenible. El crecimiento de la población conlleva una mayor presión sobre los recursos, pero también supone una mayor cantidad de mano de obra y de talento; la concentración en áreas urbanas está cambiando las dinámicas sociales y desafiando los canales de comercialización tradicionales, pero también genera nuevos mercados y fomenta la innovación; los cambios en la economía global están reduciendo los tradicionales desequilibrios de poder entre los países occidentales y el resto del mundo; y las crecientes interconexiones crean nuevos riesgos pero también oportunidades para lanzar iniciativas de alcance global. Todas estas tendencias nos están obligando a repensar qué es el desarrollo humano y de qué manera deberíamos afrontar el reto de la pobreza. Es comúnmente aceptado que la globalización implica interdependencia y que, para conseguir un desarrollo humano sostenible, la colaboración entre actores de distintos ámbitos es necesaria. Se observa una creciente convergencia de temas, intereses y soluciones en torno al desarrollo sostenible, incluso en diferentes países y sectores, lo que está facilitando la colaboración estratégica entre empresas, gobiernos y sociedad civil. Existen pocas duda a día de hoy sobre el papel fundamental que las empresas deben desempeñar en la transición mundial hacia la sostenibilidad ambiental y la erradicación de la pobreza. Las empresas están evolucionando desde un enfoque tradicional centrado en la maximización de beneficios económicos hacia un enfoque holístico que integra la sostenibilidad y la responsabilidad social como parte del núcleo de negocio de las compañías. En el ámbito medioambiental, muchas empresas ya han comenzado a actuar y tratan de reducir sus emisiones, sus desechos y su consumo de energía. Sin embargo la contribución de las empresas a la reducción de la pobreza no está tan clara. Actualmente en torno a 1,2 miles de millones de personas viven en situación de extrema pobreza. La mayoría de estas personas aún vive en zonas rurales donde la mayor parte de la población activa trabaja en el sector agrícola. Por lo tanto, mejorar las oportunidades y reducir los riesgos de los productores más vulnerables en el sector de la agricultura puede ser un motor de desarrollo rural y reducción de la pobreza, especialmente en países de bajo nivel de desarrollo cuyas economías están fundamentalmente basadas en la agricultura. Algunas empresas comienzan a incluir a los pobres en sus operaciones como consumidores, proveedores y emprendedores. Esta tesis se centra en las potenciales oportunidades relacionadas con la incorporación sostenible de los pobres como proveedores de productos y/o de mano de obra. La colaboración entre empresas y productores vulnerables de países en desarrollo es un tema relativamente nuevo y todavía poco estudiado. La pregunta que guía esta tesis es: “¿Cómo pueden las empresas facilitar la inclusión sostenible en cadenas de suministro de productores vulnerables de los países menos desarrollados?”. Para responder a la pregunta anterior, la autora ha aplicado una metodología de casos de estudio. Esta metodología se considera apropiada porque la investigación sobre cadenas de suministro inclusivas es todavía escasa y porque es necesario entender en profundidad un fenómeno de la vida real, y para ello es fundamental conocer su contexto. En primer lugar, se realiza una revisión de literatura para identificar las proposiciones y los constructos teóricos que guiarán la posterior recogida de datos. La revisión de literatura se divide en dos partes: una más general que explora la dimensión social de la sostenibilidad en cadenas de suministro, y una más específica que se centra en la incorporación de los pobres como proveedores en cadenas de suministro. A lo largo de la última década, ha habido un crecimiento exponencial de los estudios académicos sobre la sostenibilidad de las cadenas de suministro, pero la mayoría de los esfuerzos se han dirigido hacia la dimensión medioambiental de la sostenibilidad. Por lo tanto la revisión de literatura, que se presenta en la Sección 3.1 (página 35) y que profundiza en la sostenibilidad social de las cadenas de suministro, puede considerarse una contribución en sí misma. Esta revisión de literatura revela que la investigación sobre aspectos sociales en cadenas de suministro está cobrando impulso en distintas áreas de conocimiento, principalmente en los ámbitos de investigación sobre “gestión de cadenas de suministro”, “responsabilidad social corporativa” y “estudios del desarrollo”. La investigación existente sobre sostenibilidad social de cadenas de suministro se centra en tres temas: aclarar la definición de sostenibilidad social; analizar la implementación de estrategias de sostenibilidad social en cadenas de suministro; y estudiar el apoyo de las em presas líderes a proveedores vulnerables para facilitar su transición hacia la sostenibilidad. Un marco conceptual que resume los principales hallazgos de esta primera parte de la revisión de literatura es planteado en la Figura 7 (página 48). No obstante, en el área de investigación que está emergiendo en torno a la sostenibilidad social de las cadenas de suministro, los estudios relacionados con la reducción de la pobreza son aún escasos. Además se aprecia una falta de contribuciones desde y sobre los países menos desarrollados, así como una clara tendencia a reflejar la visión de las empresas líderes de las cadenas de suministro, olvidando la perspectiva de los proveedores. La segunda parte de la revisión de literatura presentada en la Sección 3.2 (página 51) profundiza en tres líneas de investigación que exploran, desde distintas perspectivas, la inclusión de los pobres en cadenas de suministro. Estas líneas son “Global Value Chains” (GVC), “Base of the Pyramid” (BoP) y “Sustainable Supply Chain Management” (SSCM). La investigación en GVC analiza las cadenas de suministro desde la perspectiva de la globalización económica y el comercio internacional, poniendo especial énfasis en las implicaciones para los países en desarrollo y las comunidades vulnerables. GVC caracteriza las cadenas de suministro según la forma en la que son gobernadas, las oportunidades de mejora que existen para los productores que forman parte de la cadena y el grado de inclusión o exclusión de las comunidades más pobres y vulnerables. La investigación en BoP explora las relaciones comerciales entre empresas y comunidades pobres. La premisa fundamental del concepto BoP es la posibilidad de combinar la generación de beneficios con la reducción de la pobreza. La propuesta original es que mediante la venta de productos y servicios a las comunidades pobres de países en desarrollo, la pobreza puede ser reducida al tiempo que las empresas incrementan sus beneficios, especialmente las grandes empresas multinacionales. Esta idea ha ido evolucionando y, a día de hoy, los investigadores BoP consideran la incorporación de los pobres no sólo como consumidores sino también como empleados, proveedores y co-creadores. La investigación en SSCM ha estado fundamentalmente orientada al estudio de la dimensión medioambiental de la sostenibilidad de cadenas de suministro. Sin embargo, la creciente externalización de la producción a países en desarrollo y las demandas de los grupos de interés para que las empresas aborden todos los aspectos de la sostenibilidad han llevado a los académicos de SSCM a reconocer la importancia de integrar asuntos relacionados con la reducción de la pobreza en sus investigaciones. Algunos estudios comienzan a apuntar los principales retos a los que se enfrentan las empresas para colaborar con productores vulnerables en sus cadenas de suministro. Estos retos son: falta de comunicación, altos costes de transacción y el incremento de la complejidad de las operaciones. Las contribuciones de estas tres líneas de investigación son complementarias para el estudio de las cadenas de suministro inclusivas. Sin embargo, raramente han sido consideradas conjuntamente, ya que pertenecen a ámbitos de conocimiento distintos. Esta tesis integra las aportaciones de GVC, BoP y SSCM en un marco conceptual para la creación y gestión de cadenas de suministro inclusivas. Este marco conceptual para cadenas de suministro inclusivas queda representado en la Figura 9 (página 68). El marco conceptual refleja las motivaciones que llevan a las empresas a colaborar con productores vulnerables, los retos a los que se enfrentan al hacerlo, y los caminos o estrategias que están siguiendo para construir y operar cadenas de suministro inclusivas de manera que sean beneficiosas tanto para la empresa como para los productores vulnerables. A fin de validar y refinar el marco conceptual propuesto, tres casos de estudio se llevan a cabo. Las cadenas de suministro analizadas por los casos de estudio pertenecen al sector agrícola y sus principales proveedores se encuentran en países de África subsahariana. Múltiples métodos de recolección de datos y triangulación son utilizados para mejorar la fiabilidad de los datos. La autora desarrolló trabajos de campo en Senegal, Etiopía y Tanzania. Estos viajes permitieron enriquecer el proceso de recogida de información mediante entrevistas semiestructuradas y conversaciones informales con los principales actores de la cadena de suministro y mediante la observación directa de los procesos y las interacciones entre productores vulnerables y empresas. El Caso de estudio A (Sección 5.1 en página 96) es un caso de estudio único. Analiza la cadena de suministro local de verduras en Senegal. La organización focal es Manobi, una empresa senegalesa que provee servicios de bajo coste a emprendedores locales del sector agrícola. El Caso de estudio A proporciona un interesante análisis del funcionamiento de una cadena de suministro local en un país en desarrollo y muestra como la provisión de servicios profesionales puede mejorar el desempeño de productores vulnerables. El Caso de estudio B (Sección 5.2 en página 122) es un caso de estudio único. Analiza la cadena de suministro global de flor cortada con origen en Etiopía. La organización focal es EHPEA, la Asociación Etíope de Productores y Exportadores Hortícolas, cuya misión es promover y salvaguardar la posición competitiva del sector agrícola etíope en el mercado global. El Caso de estudio B ayuda a comprender mejor la perspectiva de los proveedores respecto a los requerimiento de sostenibilidad del mercado global. También muestra cómo la inclusión de los productores en el proceso de desarrollo de un estándar privado facilita su implementación posterior. El Caso de estudio C (Sección 5.3 en página 143) es un caso de estudio múltiple. Analiza la cadena de suministro global de café especial con origen en Tanzania. Las organizaciones focales son comerciantes que conectan de manera directa a pequeños agricultores de café en países en desarrollo con empresas tostadoras de café en países desarrollados. El Caso de estudio C muestra cómo un pequeño agricultor puede proveer un producto “premium” al mercado global, y participar en un segmento diferenciado del mercado a través de una cadena de suministro transparente y eficiente. Las aportaciones empíricas de los casos de estudio ayudan a validar y mejorar el marco conceptual sobre cadenas de suministro inclusivas (ver discusión en el Capítulo 6 en página 170). El resultado es la propuesta de una nueva versión del marco conceptual representado en la Figura 40 (página 195). Los casos de estudio también proporcionan interesantes aportaciones en relación a la gestión de cadenas de suministro inclusivas y muestran las perspectivas de distintos actores implicados. Esta tesis arroja luz sobre el papel de las empresas en la creación y la gestión de cadenas de suministro inclusivas llevando a cabo una revisión de literatura multidisciplinar y analizando tres casos de estudio en países africanos. Como resultado, esta tesis presenta una serie de contribuciones empíricas y teóricas al ámbito de investigación emergente en torno a las cadenas de suministro inclusivas (Capítulo 7). Esta tesis también pretende ser útil a profesionales que deseen facilitar la incorporación de los pobres como proveedores en condiciones justas y beneficiosas. ABSTRACT The global outlook is changing, and this is influencing the way we understand and try to achieve sustainable human development. Population growth entails increasing pressure over resources, but it also provides greater workforce and talent; concentration in urban areas is changing social dynamics and challenging traditional marketing channels, but also creating news markets and driving innovation; the global economy shift is rebalancing the traditional power imbalance between Western countries and the rest of the world, making new opportunities to arise; and interconnections and global interdependence create new risks but also opportunities for launching initiatives with a global reach. All these trends are impelling us to rethink what development is and in which way poverty alleviation should be approached. It is generally agreed that globalization implies interdependence and, in order to achieve sustainable human development, collaboration of all actors is needed. A convergence of issues, interests and solutions related to sustainable development is being observed across countries and sectors, encouraging strategic collaboration among companies, governments and civil society. There is little doubt nowadays about the crucial role of the private sector in the world’s path towards environmental sustainability and poverty alleviation. Businesses are evolving from a “business as usual” stance to a more sustainable and responsible approach. In the environmental arena, many companies have already “walk the talk”, implementing environmental management systems and trying to reduce emissions and energy consumption. However, regarding poverty alleviation, their contribution is less clear. There are around 1.2 billion people living in extreme poverty. Most of this people still live in rural areas where the agricultural sector employs a big part of the active population. Therefore, improving opportunities and reducing risks for vulnerable producers in the agri-food sector can be a primary engine of rural development and poverty alleviation, particularly in the poor, agriculture-based economies of least developed countries. Some companies are beginning to include the poor into their operations as consumers, suppliers and entrepreneurs. This thesis focuses specifically on the potential opportunities related to the sustainable incorporation of the poor as suppliers of products and/or labor. Business collaboration with vulnerable producers in developing countries is a relatively new trend and it is still understudied. The overall question guiding this thesis is: “How can businesses facilitate the sustainable inclusion of vulnerable producers from least developed countries into supply chains?”. In order to answer the research question, the author has applied a case study research strategy. This methodology is considered appropriate because research about inclusive supply chains is still at an early stage, and because there is a need to understand a real-life phenomenon in depth, but such understanding encompasses important contextual conditions. First, a literature review is conducted, in order to identify the research propositions and theoretical constructs that will guide the data collection. The literature review is divided in two parts: a more general one that explores the social dimension of sustainability of supply chains, and a more specific one that focuses on the incorporation of the poor as suppliers in supply chains. During the last decade, there has been an exponential growth of studies in the field of supply chain sustainability, but research efforts have traditionally been directed towards the analysis of the environmental dimension. Therefore, the literature review presented in Section 3.1 (page 35) that delves into social sustainability of supply chains can be considered a contribution in itself. This literature review reveals that the investigation of social issues in supply chains is gaining momentum and comes from different academic disciplines, namely Supply Chain Management, Corporate Social Responsibility and Development Studies. Existing research about social sustainability of supply chains focuses on three issues: clarify the definition of social sustainability; analyze the implementation of social sustainability strategies in supply chains; and study lead companies’ support to vulnerable suppliers in their transition towards sustainability. A conceptual framework that outlines the main findings that emerge from this first part of literature review is proposed in Figure 7 (page 48). Nevertheless, in this nascent field of social sustainability of supply chains, studies related to poverty alleviation are still scarce. Moreover, a lack of contributions from and about least developed countries has been observed, as well as a tendency to reflect on the lead firms’ standpoint, neglecting the suppliers’ perspective. The second part of the literature review (Section 3.2 in page 51) delves into three research streams that are exploring the inclusion of the poor into supply chains from different viewpoints. These research streams are Global Value Chains (GVC), Base of the Pyramid (BoP) and Sustainable Supply Chain Management (SSCM). GVC research discusses the dynamics of economic globalization and international trade, putting special emphasis in the implications for developing countries and vulnerable communities. GVC characterizes supply chains by the way they are governed, the upgrading opportunities that exist for producers in the chain and the degree of inclusion or exclusion of impoverished communities. BoP research explores trading relationships between businesses and impoverished communities. The core premise of the BoP concept is the possibility to combine profits with poverty alleviation. The original BoP proposition is that by marketing innovative products and services to poor communities in developing countries, poverty would be reduced and companies would increase their benefits, especially multinational companies. This idea has evolved to consider the incorporation of the poor to business activities not only as consumers, but also as employees, entrepreneurs and co-creators. The SSCM school of thought has mainly focused on studying the environmental dimension of supply chain sustainability, neglecting the consideration of the social perspective. However, in recent years, increasing outsourcing of production to developing countries and stakeholders’ demands for a more holistic approach to business sustainability have led SSCM scholars to acknowledge the importance of integrating poverty concerns in this field’s research agenda. Some SSCM studies identify the main operational challenges for companies which engage with vulnerable suppliers in their supply chains: missing communication, higher transactional and operational costs and increased complexity. Contributions from these three research streams are complementary for the study of inclusive supply chains. However, they have been rarely considered together, since they belong to different research areas. This thesis seeks to play a dovetailing role in this scenario by proposing a conceptual framework for creating and operating inclusive supply chains that builds on contributions from GVC, SSCM and BoP research. This framework for inclusive supply chains is depicted in Figure 9 (page 68), and explains the motivations that drive businesses to collaborate with vulnerable suppliers, the chal lenges they face in doing so, and the pathways they are following in order to build and operate inclusive supply chains profitably for both buying companies and vulnerable suppliers. In order to validate and refine the proposed framework, three case studies are carried out. The supply chains analyzed by the case studies belong to the agri-food sector and source from Sub-Saharan African countries. Multiple data collection methods and triangulation are used in order to improve reliability of findings. The author carried out field work in Senegal, Ethiopia and Tanzania. These travels enriched the data collection process, providing semi-structured interviews and informal conversations with the main actors in the supply chains, as well as direct observation of processes and interactions among companies and vulnerable suppliers. Case study A (Section 5.1 in page 96) is a single case study. It analyzes a local supply chain in Senegal providing vegetables to the local market. The focal organization is Manobi, a Senegalese inclusive business which provides affordable ICT services to local entrepreneurs in the agri-food sector. Case study A provides interesting insights into the dynamics of local supply chains and how professional services can help to improve their performance. Case study B (Section 5.2 in page 122) is a single case study. It analyzes a global supply chain with origin in Ethiopia providing cut flowers to the global commodity market. The focal organization is EHPEA, Ethiopian Horticulture Producers and Exporters Association, whose mission is to promote and safeguard the competitive position of the Ethiopian horticulture sector within the global market. Case study B helps to better understand the suppliers’ perspective regarding global market sustainability requirements and shows how the inclusion of suppliers in the process of development of a private standard has a positive impact in its implementation. Case study C (Section 5.3 in page 143) is a multiple case study. It analyzes a global supply chain with origin in Tanzania providing coffee to the global niche market of specialty coffee. The focal organizations are traders who are directly connecting smallholder coffee farmers in developing countries to coffee roasters in developed countries. Case study C shows how smallholder farmers can supply a premium product and be incorporated in a differentiated market segment through a transparent and efficient supply chain. The empirical findings from the case studies help to validate and refine the conceptual framework (see discussion in Chapter 6). The proposal of a new version of the conceptual framework is depicted in Figure 40 (page 195). The case studies also provide interesting insights related to the management of inclusive supply chains and show the perspectives of the different actors involved. This thesis sheds some light on the role of businesses in the creation and operation of inclusive supply chains by carrying out a cross-disciplinary literature review and analyzing three case studies in African countries. In doing so, this thesis presents a series of theoretical and empirical contributions to the emerging academic field of inclusive supply chains (Chapter 7). This thesis also intends to be useful to practitioners willing to improve the incorporation of the poor as suppliers in fair and profitable conditions.

Gestión intelectual de las prácticas comunicativas en arquitectura : S, M, L, XL, el gran evento = The intellectual management of communication practices in architecture : S, M, L, XL, the big event

La tesis doctoral se centra en la posibilidad de entender que la práctica de arquitectura puede encontrar en las prácticas comunicativas un apoyo instrumental, que sobrepasa cualquier simplificación clásica del uso de los medios como una mera aplicación superficial, post-producida o sencillamente promocional. A partir de esta premisa se exponen casos del último cuarto del siglo XX y se detecta que amenazas como el riesgo de la banalización, la posible saturación de la imagen pública o la previsible asociación incorrecta con otros individuos en presentaciones grupales o por temáticas, han podido influir en un crecimiento notable de la adquisición de control, por parte de los arquitectos, en sus oportunidades mediáticas. Esto es, como si la arquitectura hubiera empezado a superar y optimizar algo inevitable, que las fórmulas expositivas y las publicaciones, o más bien del exponer(se) y publicar(se), son herramientas disponibles para activar algún tipo de gestión intelectual de la comunicación e información circulante sobre si misma. Esta práctica de “autoedición” se analiza en un periodo concreto de la trayectoria de OMA -Office for Metropolitan Architecture-, estudio considerado pionero en el uso eficiente, oportunista y personalizado de los medios. Así, la segunda parte de la tesis se ocupa del análisis de su conocida monografía S,M,L,XL (1995), un volumen que contó con gran participación por parte de sus protagonistas durante la edición, y de cuyo proceso de producción apenas se había investigado. Esta publicación señaló un punto de inflexión en su género alterando todo formato y restricciones anteriores, y se ha convertido en un volumen emblemático para la disciplina que ninguna réplica posterior ha podido superar. Aquí se presenta a su vez como el desencadenante de la construcción de un “gran evento” que concluye en la transformación de la identidad de OMA en 10 años, paradójicamente entre el nacimiento de la Fundación Groszstadt y el arranque de la actividad de AMO, dos entidades paralelas clave anexas a OMA. Este planteamiento deviene de cómo la investigación desvela que S,M,L,XL es una pieza más, central pero no independiente, dentro de una suma de acciones e individuos, así como otras publicaciones, exposiciones, eventos y también artículos ensayados y proyectos, en particular Bigness, Generic City, Euralille y los concursos de 1989. Son significativos aspectos como la apertura a una autoría múltiple, encabezada por Rem Koolhaas y el diseñador gráfico Bruce Mau, acompañados en los agradecimientos de la editora Jennifer Sigler y cerca de una centena de nombres, cuyas aportaciones no necesariamente se basan en la construcción de fragmentos del libro. La supresión de ciertos límites permite superar también las tareas inicialmente relevantes en la edición de una publicación. Un objetivo general de la tesis es también la reflexión sobre relaciones anteriormente cuestionadas, como la establecida entre la arquitectura y los mercados o la economía. Tomando como punto de partida la idea de “design intelligence” sugerida por Michael Speaks (2001), se extrae de sus argumentos que lo esencial es el hallazgo de la singularidad o inteligencia propia de cada estudio de arquitectura o diseño. Asimismo se explora si en la construcción de ese tipo de fórmulas magistrales se alojaban también combinaciones de interés y productivas entre asuntos como la eficiencia y la creatividad, o la organización y las ideas. En esta dinámica de relaciones bidireccionales, y en ese presente de exceso de información, se fundamenta la propuesta de una equivalencia más evidenciada entre la “socialización” del trabajo del arquitecto, al compartirlo públicamente e introducir nuevas conversaciones, y la relación inversa a partir del trabajo sobre la “socialización” misma. Como si la consciencia sobre el uso de los medios pudiera ser efectivamente instrumental, y contribuir al desarrollo de la práctica de arquitectura, desde una perspectiva idealmente comprometida e intelectual. ABSTRACT The dissertation argues the possibility to understand that the practice of architecture can find an instrumental support in the practices of communication, overcoming any classical simplification of the use of media, generally reduced to superficial treatments or promotional efforts. Thus some cases of the last decades of the 20th century are presented. Some threats detected, such as the risk of triviality, the saturation of the public image or the foreseeable wrong association among individuals when they are introduced as part of thematic groups, might have encouraged a noticeable increase of command taken by architects when there is chance to intervene in a media environment. In other words, it can be argued that architecture has started to overcome and optimize the inevitable, the fact that exhibition formulas and publications, or simply the practice of (self)exhibition or (self)publication, are tools at our disposal for the activation of any kind of intellectual management of communication and circulating information about itself. This practice of “self-edition” is analyzed in a specific timeframe of OMA’s trajectory, an office that is considered as a ground-breaking actor in the efficient and opportunistic use of media. Then the second part of the thesis dissects their monograph S,M,L,XL (1995), a volume in which its main characters were deeply involved in terms of edition and design, a process barely analyzed up to now. This publication marked a turning point in its own genre, disrupting old formats and traditional restrictions. It became such an emblematic volume for the discipline that none of the following attempts of replica has ever been able to improve this precedent. Here, the book is also presented as the element that triggers the construction of a “big event” that concludes in the transformation of OMA identity in 10 years. Paradoxically, between the birth of the Groszstadt Foundation and the early steps of AMO, both two entities parallel and connected to OMA. This positions emerge from how the research unveils that S,M,L,XL is one more piece, a key one but not an unrelated element, within a sum of actions and individuals, as well as other publications, exhibitions, articles and projects, in particular Bigness, Generic City, Euralille and the competitions of 1989. Among the remarkable innovations of the monograph, there is an outstanding openness to a regime of multiple authorship, headed by Rem Koolhaas and the graphic designer Bruce Mau, who share the acknowledgements page with the editor, Jennifer Sigler, and almost 100 people, not necessarily responsible for specific fragments of the book. In this respect, the dissolution of certain limits made possible that the expected tasks in the edition of a publication could be trespassed. A general goal of the thesis is also to open a debate on typically questioned relations, particularly between architecture and markets or economy. Using the idea of “design intelligence”, outlined by Michael Speaks in 2001, the thesis pulls out its essence, basically the interest in detecting the singularity, or particular intelligence of every office of architecture and design. Then it explores if in the construction of this kind of ingenious formulas one could find interesting and useful combinations among issues like efficiency and creativity, or organization and ideas. This dynamic of bidirectional relations, rescued urgently at this present moment of excess of information, is based on the proposal for a more evident equivalence between the “socialization” of the work in architecture, anytime it is shared in public, and the opposite concept, the work on the proper act of “socialization” itself. As if a new awareness of the capacities of the use of media could turn it into an instrumental force, capable of contributing to the development of the practice of architecture, from an ideally committed and intelectual perspective.

The extended environment of mononuclear metal centers in protein structures

The objectives of this and the following paper are to identify commonalities and disparities of the extended environment of mononuclear metal sites centering on Cu, Fe, Mn, and Zn. The extended environment of a metal site within a protein embodies at least three layers: the metal core, the ligand group, and the second shell, which is defined here to consist of all residues distant less than 3.5 Å from some ligand of the metal core. The ligands and second-shell residues can be characterized in terms of polarity, hydrophobicity, secondary structures, solvent accessibility, hydrogen-bonding interactions, and membership in statistically significant residue clusters of different kinds. Findings include the following: (i) Both histidine ligands of type I copper ions exclusively attach the Nδ1 nitrogen of the histidine imidazole ring to the metal, whereas histidine ligands for all mononuclear iron ions and nearly all type II copper ions are ligated via the Nɛ2 nitrogen. By contrast, multinuclear copper centers are coordinated predominantly by histidine Nɛ2, whereas diiron histidine contacts are predominantly Nδ1. Explanations in terms of steric differences between Nδ1 and Nɛ2 are considered. (ii) Except for blue copper (type I), the second-shell composition favors polar residues. (iii) For blue copper, the second shell generally contains multiple methionine residues, which are elements of a statistically significant histidine–cysteine–methionine cluster. Almost half of the second shell of blue copper consists of solvent-accessible residues, putatively facilitating electron transfer. (iv) Mononuclear copper atoms are never found with acidic carboxylate ligands, whereas single Mn2+ ion ligands are predominantly acidic and the second shell tends to be mostly buried. (v) The extended environment of mononuclear Fe sites often is associated with histidine–tyrosine or histidine–acidic clusters.

Highly conserved features of DNA binding between two divergent members of the Myb family of transcription factors

Bas1p, a divergent yeast member of the Myb family of transcription factors, shares with the proteins of this family a highly conserved cysteine residue proposed to play a role in redox regulation. Substitutions of this residue in Bas1p (C153) allowed us to establish that, despite its very high conservation, it is not strictly required for Bas1p function: its substitution with a small hydrophobic residue led to a fully functional protein in vitro and in vivo. C153 was accessible to an alkylating agent in the free protein but was protected by prior exposure to DNA. The reactivity of cysteines in the first and third repeats was much lower than in the second repeat, suggesting a more accessible conformation of repeat 2. Proteolysis protection, fluorescence quenching and circular dichroism experiments further indicated that DNA binding induces structural changes making Bas1p less accessible to modifying agents. Altogether, our results strongly suggest that the second repeat of the DNA-binding domain of Bas1p behaves similarly to its Myb counterpart, i.e. a DNA-induced conformational change in the second repeat leads to formation of a full helix–turn–helix-related motif with the cysteine packed in the hydrophobic core of the repeat.

Cis-acting requirements in flanking DNA for the programmed elimination of mse2.9: a common mechanism for deletion of internal eliminated sequences from the developing macronucleus of Tetrahymena thermophila

During macronuclear development in the ciliated protozoan Tetrahymena thermophila, extensive DNA deletions occur, eliminating thousands of internal eliminated sequences (IESs). Using an rDNA-based transformation assay we have analyzed the role during DNA deletion of DNA flanking mse2.9, an IES within the second intron of a gene encoding an as yet incompletely characterized protein. We establish that a cis-acting sequence for mse2.9 deletion acts at a distance to specify deletion boundaries. A complex sequence element necessary for efficient and accurate mse2.9 deletion is located in the region 47–81 bp from the right side of mse2.9. The ability of a variety of IES flanking sequences to rescue a processing deficient mse2.9 construct indicates that some cis-acting signal is shared among different IESs. In addition, the short intronic sequence that flanks mse2.9 is able to direct efficient and accurate processing. Despite no obvious sequence similarity between mse2.9 and other IESs, we suggest that a common mechanism is used to delete different families of IESs in Tetrahymena.