Patient-specific computational hemodynamics of intracranial aneurysms from 3D rotational angiography and CT angiography: an in vivo reproducibility study

Patient-specific simulations of the hemodynamics in intracranial aneurysms can be constructed by using image-based vascular models and CFD techniques. This work evaluates the impact of the choice of imaging technique on these simulations

Automated Segmentation of Cerebral Vasculature with Aneurysms in 3DRA and TOF-MRA using Geodesic Active Regions: an Evaluation Study

Purpose: To evaluate the suitability of an improved version of an automatic segmentation method based on geodesic active regions (GAR) for segmenting cerebral vasculature with aneurysms from 3D X-ray reconstruc-tion angiography (3DRA) and time of °ight magnetic resonance angiography (TOF-MRA) images available in the clinical routine.Methods: Three aspects of the GAR method have been improved: execution time, robustness to variability in imaging protocols and robustness to variability in image spatial resolutions. The improved GAR was retrospectively evaluated on images from patients containing intracranial aneurysms in the area of the Circle of Willis and imaged with two modalities: 3DRA and TOF-MRA. Images were obtained from two clinical centers, each using di®erent imaging equipment. Evaluation included qualitative and quantitative analyses ofthe segmentation results on 20 images from 10 patients. The gold standard was built from 660 cross-sections (33 per image) of vessels and aneurysms, manually measured by interventional neuroradiologists. GAR has also been compared to an interactive segmentation method: iso-intensity surface extraction (ISE). In addition, since patients had been imaged with the two modalities, we performed an inter-modality agreement analysis with respect to both the manual measurements and each of the two segmentation methods. Results: Both GAR and ISE di®ered from the gold standard within acceptable limits compared to the imaging resolution. GAR (ISE, respectively) had an average accuracy of 0.20 (0.24) mm for 3DRA and 0.27 (0.30) mm for TOF-MRA, and had a repeatability of 0.05 (0.20) mm. Compared to ISE, GAR had a lower qualitative error in the vessel region and a lower quantitative error in the aneurysm region. The repeatabilityof GAR was superior to manual measurements and ISE. The inter-modality agreement was similar between GAR and the manual measurements. Conclusions: The improved GAR method outperformed ISE qualitatively as well as quantitatively and is suitable for segmenting 3DRA and TOF-MRA images from clinical routine.

Determination and Evaluation of Alternative Methods for Managing and Controlling Highway-Related Dust Phase II—Demonstration Project, June 2005

The State of Iowa currently has approximately 69,000 miles of unpaved secondary roads. Due to the low traffic count on these unpaved o nts as ng e two dust ed d roads, paving with asphalt or Portland cement concrete is not economical. Therefore to reduce dust production, the use of dust suppressants has been utilized for decades. This study was conducted to evaluate the effectiveness of several widely used dust suppressants through quantitative field testing on two of Iowa’s most widely used secondary road surface treatments: crushed limestone rock and alluvial sand/gravel. These commercially available dust suppressants included: lignin sulfonate, calcium chloride, and soybean oil soapstock. These suppressants were applied to 1000 ft test sections on four unpaved roads in Story County, Iowa. Tduplicate field conditions, the suppressants were applied as a surface spray once in early June and again in late August or early September. The four unpaved roads included two with crushed limestone rock and two with alluvial sand/gravel surface treatmewell as high and low traffic counts. The effectiveness of the dust suppressants was evaluated by comparing the dust produced on treated and untreated test sections. Dust collection was scheduled for 1, 2, 4, 6, and 8 weeks after each application, for a total testiperiod of 16 weeks. Results of a cost analysis between annual dust suppressant application and biennial aggregate replacement indicated that the cost of the dust suppressant, its transportation, and application were relatively high when compared to that of thaggregate types. Therefore, the biennial aggregate replacement is considered more economical than annual dust suppressant application, although the application of annual dust suppressant reduced the cost of road maintenance by 75 %. Results of thecollection indicated that the lignin sulfonate suppressant outperformed calcium chloride and soybean oil soapstock on all four unpavroads, the effect of the suppressants on the alluvial sand/gravel surface treatment was less than that on the crushed limestone rock, the residual effects of all the products seem reasonably well after blading, and the combination of alluvial sand/gravel surface treatment anhigh traffic count caused dust reduction to decrease dramatically.

News, I-74 Iowa-Illinois Corridor Study, Issue 4, Winter 2005

Newsletter updating the corridor study of the Mississippi Bridge project for the states of Iowa and Illinois.

News, I-74 Iowa-Illinois Corridor Study, Issue 1 Spring 2001

Newsletter updating the corridor study of the Mississippi Bridge project for the states of Iowa and Illinois.

News, I-74 Iowa-Illinois Corridor Study, Issue 2, Winter 2002

Newsletter updating the corridor study of the Mississippi Bridge project for the states of Iowa and Illinois.

News, I-74 Iowa-Illinois Corridor Study, Issue 3, Fall 2003

Newsletter updating the corridor study of the Mississippi Bridge project for the states of Iowa and Illinois.

Development of Performance Properties of Ternary Mixes: Scoping Study, June 2005

Pozzolans and slag extend the market for concrete products by improving specific properties of the products, which allows the products to be constructed with materials or placed in environments that would have precluded the use of portland cement alone. In properly formulated concrete mixes, pozzolans and slag have been shown to enhance long-term strength, decrease permeability, increase durability, reduce thermal cracking of mass concrete, minimize or eliminate cracking related to alkali-silica reaction (ASR), and minimize or eliminate cracking related to sulfate attack. The purpose of this research project was to conduct a scoping study that could be used to evaluate the need for additional research in the area of supplementary cementitious materials (SCMs) that are used in concrete for highway applications. Special emphasis was given to the concept of using two or more SCMs in a single concrete mixture. The scope of the study was limited to a literature survey and panel discussions concerning issues relevant to the project. No laboratory work was conducted for this project. A problem statement with research plan was created that could be used to guide a pooled fund project.

Impact of a telenursing service on satisfaction and health outcomes of children with inflammatory rheumatic diseases and their families: a crossover randomized trial study protocol.

BACKGROUND: Pediatric rheumatic diseases have a significant impact on children's quality of life and family functioning. Disease control and management of the symptoms are important to minimize disability and pain. Specialist clinical nurses play a key role in supporting medical teams, recognizing poor disease control and the need for treatment changes, providing a resource to patients on treatment options and access to additional support and advice, and identifying best practices to achieve optimal outcomes for patients and their families. This highlights the importance of investigating follow-up telenursing (TN) consultations with experienced, specialist clinical nurses in rheumatology to provide this support to children and their families. METHODS/DESIGN: This randomized crossover, experimental longitudinal study will compare the effects of standard care against a novel telenursing consultation on children's and family outcomes. It will examine children below 16 years old, recently diagnosed with inflammatory rheumatic diseases, who attend the pediatric rheumatology outpatient clinic of a tertiary referral hospital in western Switzerland, and one of their parents. The telenursing consultation, at least once a month, by a qualified, experienced, specialist nurse in pediatric rheumatology will consist of providing affective support, health information, and aid to decision-making. Cox's Interaction Model of Client Health Behavior serves as the theoretical framework for this study. The primary outcome measure is satisfaction and this will be assessed using mixed methods (quantitative and qualitative data). Secondary outcome measures include disease activity, quality of life, adherence to treatment, use of the telenursing service, and cost. We plan to enroll 56 children. DISCUSSION: The telenursing consultation is designed to support parents and children/adolescents during the course of the disease with regular follow-up. This project is novel because it is based on a theoretical standardized intervention, yet it allows for individualized care. We expect this trial to confirm the importance of support by a clinical specialist nurse in improving outcomes for children and adolescents with inflammatory rheumatisms. TRIAL REGISTRATION: ClinicalTrial.gov identifier: NCT01511341 (December 1st, 2012).

Final Report for the Iowa Livestock Industry Waste Characterization and Methane Recovery Information Dissemination Project, 2003

The Iowa livestock industry generates large quantities of manure and other organic residues; composed of feces, urine, bedding material, waste feed, dilution water, and mortalities. Often viewed as a waste material, little has been done to characterize and determine the usefulness of this resource. The Iowa Department of Natural Resources initiated the process to assess in detail the manure resource and the potential utilization of this resource through anaerobic digestion coupled with energy recovery. Many of the pieces required to assess the manure resource already exist, albeit in disparate forms and locations. This study began by interpreting and integrating existing Federal, State, ISU studies, and other sources of livestock numbers, housing, and management information. With these data, models were analyzed to determine energy production and economic feasibility of energy recovery using anaerobic digestion facilities on livestock faxms. Having these data individual facilities and clusters that appear economically feasible can be identified specifically through the use of a GIs system for further investigation. Also livestock facilities and clusters of facilities with high methane recovery potential can be the focus of targeted educational programs through Cooperative Extension network and other outreach networks, providing a more intensive counterpoint to broadly based educational efforts.

News, I-74 Iowa-Illinois Corridor Study, Issue 5, Spring 2006

Newsletter updating the corridor study of the Mississippi Bridge project for the states of Iowa and Illinois.

Identifying and Implementing Effective Training for Hispanic Craft Workers, American Supervisors, and DOT Inspectors: Phase III of the Hispanic Workforce Research Project, May 2006

The number of Hispanic workers in the U.S. construction industry has been steadily increasing, and language and cultural barriers have sometimes arisen on the jobsite. Due in part to these barriers, the number of fatalities among Hispanics at construction sites in 2001 jumped 24%, while construction fatalities overall dropped 3%. This study, which constitutes Phase III of the Hispanic Workforce Research Project, addresses these language and cultural barriers by investigating the most effective way to deliver training material developed in Phases I and II to Hispanic workers, American supervisors, and department of transportation (DOT) inspectors. The research methodology consisted of assessing the needs and interests of potential and current course participants in terms of exploring innovative ways to deliver the training. The training courses were then adapted and delivered to fit the specific needs of each audience. During Phase III of this project, the research team delivered the courses described in the Phase I and II reports to eight highway construction companies and two DOT groups. The courses developed in Phases I and II consist of four construction-focused language training courses that can be part of an effective training program to facilitate integration among U.S. and Hispanic workers, increase productivity and motivation at the jobsite, and decrease the existing high mortality rate for Hispanic workers. Moreover, the research team developed a course for the construction season called Toolbox Integration Course for Hispanic workers and American supervisors (TICHA), which consists of nine 45-minute modules delivered to one construction company over 11 weeks in the summer of 2005.

Effective continuing professional development for translating shared decision making in primary care: A study protocol.

Background: Shared decision making (SDM) is a process by which a healthcare choice is made jointly by the healthcare professional and the patient. SDM is the essential element of patient-centered care, a core concept of primary care. However, SDM is seldom translated into primary practice. Continuing professional development (CPD) is the principal means by which healthcare professionals continue to gain, improve, and broaden the knowledge and skills required for patient-centered care. Our international collaboration seeks to improve the knowledge base of CPD that targets translating SDM into the clinical practice of primary care in diverse healthcare systems. Methods: Funded by the Canadian Institutes of Health Research (CIHR), our project is to form an international, interdisciplinary research team composed of health services researchers, physicians, nurses, psychologists, dietitians, CPD decision makers and others who will study how CPD causes SDM to be practiced in primary care. We will perform an environmental scan to create an inventory of CPD programs and related activities for translating SDM into clinical practice. These programs will be critically assessed and compared according to their strengths and limitations. We will use the empirical data that results from the environmental scan and the critical appraisal to identify knowledge gaps and generate a research agenda during a two-day workshop to be held in Quebec City. We will ask CPD stakeholders to validate these knowledge gaps and the research agenda. Discussion: This project will analyse existing CPD programs and related activities for translating SDM into the practice of primary care. Because this international collaboration will develop and identify various factors influencing SDM, the project could shed new light on how SDM is implemented in primary care.

Relying on the agent in charge of production for project evaluation

I study the optimal project choice when the principal relies on the agent in charge of production for project evaluation. The principal has to choose between a safe project generating a fixed revenue and a risky project generating an uncertain revenue. The agent has private information about the production cost under each project but also about the signal regarding the profitability of the risky project. If the signal favoring the adoption of the risky project is goods news to the agent, integrating production and project evaluation tasks does not generate any loss compared to the benchmark in which the principal herself receives the signal. By contrast, if it is bad news, task integration creates an endogenous reservation utility which is type-dependent and thereby generates countervailing incentives, which can make a bias toward either project optimal. Our results can offer an explanation for why good firms can go bad and a rationale for the separation of day-to-day operating decisions from long-term strategic decisions stressed by Williamson.

Survey on batch-to-batch variation in spray paints: a collaborative study

This study represents the most extensive analysis of batch-to-batch variations in spray paint samples to date. The survey was performed as a collaborative project of the ENFSI (European Network of Forensic Science Institutes) Paint and Glass Working Group (EPG) and involved 11 laboratories. Several studies have already shown that paint samples of similar color but from different manufacturers can usually be differentiated using an appropriate analytical sequence. The discrimination of paints from the same manufacturer and color (batch-to-batch variations) is of great interest and these data are seldom found in the literature. This survey concerns the analysis of batches from different color groups (white, papaya (special shade of orange), red and black) with a wide range of analytical techniques and leads to the following conclusions. Colored batch samples are more likely to be differentiated since their pigment composition is more complex (pigment mixtures, added pigments) and therefore subject to variations. These variations may occur during the paint production but may also occur when checking the paint shade in quality control processes. For these samples, techniques aimed at color/pigment(s) characterization (optical microscopy, microspectrophotometry (MSP), Raman spectroscopy) provide better discrimination than techniques aimed at the organic (binder) or inorganic composition (fourier transform infrared spectroscopy (FTIR) or elemental analysis (SEM - scanning electron microscopy and XRF - X-ray fluorescence)). White samples contain mainly titanium dioxide as a pigment and the main differentiation is based on the binder composition (Csingle bondH stretches) detected either by FTIR or Raman. The inorganic composition (elemental analysis) also provides some discrimination. Black samples contain mainly carbon black as a pigment and are problematic with most of the spectroscopic techniques. In this case, pyrolysis-GC/MS represents the best technique to detect differences. Globally, Py-GC/MS may show a high potential of discrimination on all samples but the results are highly dependent on the specific instrumental conditions used. Finally, the discrimination of samples when data was interpreted visually as compared to statistically using principal component analysis (PCA) yielded very similar results. PCA increases sensitivity and could perform better on specific samples, but one first has to ensure that all non-informative variation (baseline deviation) is eliminated by applying correct pre-treatments. Statistical treatments can be used on a large data set and, when combined with an expert's opinion, will provide more objective criteria for decision making.