A high-resolution map of direct and indirect connectivity of erosion risk areas to surface waters in Switzerland: A risk assessment tool for planning and policy-making

Off-site effects of soil erosion are becoming increasingly important, particularly the pollution of surface waters. In order to develop environmentally efficient and cost effective mitigation options it is essential to identify areas that bear both a high erosion risk and high connectivity to surface waters. This paper introduces a simple risk assessment tool that allows the delineation of potential critical source areas (CSA) of sediment input into surface waters concerning the agricultural areas of Switzerland. The basis are the erosion risk map with a 2 m resolution (ERM2) and the drainage network, which is extended by drained roads, farm tracks, and slope depressions. The probability of hydrological and sedimentological connectivity is assessed by combining soil erosion risk and extended drainage network with flow distance calculation. A GIS-environment with multiple-flow accumulation algorithms is used for routing runoff generation and flow pathways. The result is a high resolution connectivity map of the agricultural area of Switzerland (888,050 ha). Fifty-five percent of the computed agricultural area is potentially connected with surface waters, 45% is not connected. Surprisingly, the larger part of 34% (62% of the connected area) is indirectly connected with surface waters through drained roads, and only 21% are directly connected. The reason is the topographic complexity and patchiness of the landscape due to a dense road and drainage network. A total of 24% of the connected area and 13% of the computed agricultural area, respectively, are rated with a high connectivity probability. On these CSA an adapted land use is recommended, supported by vegetated buffer strips preventing sediment load. Even areas that are far away from open water bodies can be indirectly connected and need to be included in planning of mitigation measures. Thus, the connectivity map presented is an important decision-making tool for policy-makers and extension services. The map is published on the web and thus available for application.

Assessing and applying evidence-based interventions at the community level in India as a model policy to reduce neonatal mortality rates in Nigeria

Background. The United Nations' Millennium Development Goal (MDG) 4 aims for a two-thirds reduction in death rates for children under the age of five by 2015. The greatest risk of death is in the first week of life, yet most of these deaths can be prevented by such simple interventions as improved hygiene, exclusive breastfeeding, and thermal care. The percentage of deaths in Nigeria that occur in the first month of life make up 28% of all deaths under five years, a statistic that has remained unchanged despite various child health policies. This paper will address the challenges of reducing the neonatal mortality rate in Nigeria by examining the literature regarding efficacy of home-based, newborn care interventions and policies that have been implemented successfully in India. ^ Methods. I compared similarities and differences between India and Nigeria using qualitative descriptions and available quantitative data of various health indicators. The analysis included identifying policy-related factors and community approaches contributing to India's newborn survival rates. Databases and reference lists of articles were searched for randomized controlled trials of community health worker interventions shown to reduce neonatal mortality rates. ^ Results. While it appears that Nigeria spends more money than India on health per capita ($136 vs. $132, respectively) and as percent GDP (5.8% vs. 4.2%, respectively), it still lags behind India in its neonatal, infant, and under five mortality rates (40 vs. 32 deaths/1000 live births, 88 vs. 48 deaths/1000 live births, 143 vs. 63 deaths/1000 live births, respectively). Both countries have comparably low numbers of healthcare providers. Unlike their counterparts in Nigeria, Indian community health workers receive training on how to deliver postnatal care in the home setting and are monetarily compensated. Gender-related power differences still play a role in the societal structure of both countries. A search of randomized controlled trials of home-based newborn care strategies yielded three relevant articles. Community health workers trained to educate mothers and provide a preventive package of interventions involving clean cord care, thermal care, breastfeeding promotion, and danger sign recognition during multiple postnatal visits in rural India, Bangladesh, and Pakistan reduced neonatal mortality rates by 54%, 34%, and 15–20%, respectively. ^ Conclusion. Access to advanced technology is not necessary to reduce neonatal mortality rates in resource-limited countries. To address the urgency of neonatal mortality, countries with weak health systems need to start at the community level and invest in cost-effective, evidence-based newborn care interventions that utilize available human resources. While more randomized controlled studies are urgently needed, the current available evidence of models of postnatal care provision demonstrates that home-based care and health education provided by community health workers can reduce neonatal mortality rates in the immediate future.^

Infrastructure Development of Railway in Cambodia: A Long Term Strategy

Infrastructure development means for the making of living environment, transport and communications, disaster prevention and national land conservation, agriculture, forestry and fisheries, and energy production and supply. Transport infrastructure development in Cambodia involved with (1) road, (2) railway, (3) port, inland-water way and (4) aviation. All model of transport infrastructure have special different kinds of importance. Railway is different from other base important of railways are transport passengers and traffic freight especially transport for heavy goods in huge capacity and in long distance by safer and faster. Transport in Cambodia for traffic freight export import base from Thailand and other via Sisophon and Shihanoukvill port. Traffic is increasing rapidly during nowadays railway condition in adequate of demand required. This is why Railway is selected as the topic of this paper to prevent monopoly of road transport. This paper, does review about infrastructure development plan for Railway in Cambodia as a long term strategy by review and analysis forecast on the previous performance of Royal Railways of Cambodia (RRC) transport traffic involved with condition of infrastructure development of railway in Cambodia. And also review the plan of development RRC but just only detail a plan of rehabilitation that is immediately needed. Suggest some recommendation at the last part. As Cambodia is a member country of ASEAN and also Mekong sub-region. For make sure that transport networks work effectively with a progress of economic integration, we make clear what is important for infrastructure development of railway in Cambodia from the standpoint of the development plan of Mekong sub-region. This paper is organized by 4 sections. Section 1 review about Infrastructure Development of Railway in Cambodia (IDRC) Historical Background, Follow by Section 2 will review the Current Situation of IDRC and some analysis of transport performance from previous years, Then Section 3 review of the focusing on traffic transport of RRC in the future, Section 4 review Infrastructure Development of Railway in Cambodia Future plans in long term; at last conclusion and recommendation. In section 1 does review history background of RRC from the rail first begun. But why is needed to review? Because of history background is involved infrastructure development of RRC in present time. History background made big gaps constraint and obstacle for socioeconomic development and poverty reduction, also left Cambodia with tragedy and left developed behind. After that remain infrastructure development needs huge fund and long time for restoration, reconstruction, rehabilitation and development into new technology as most of world practice.

Metodología para la evaluación de la consistencia del trazado de carreteras interurbanas de dos carriles

La consistencia del trazado puede interpretarse como la relación entre las características geométricas de una carretera y lo que espera encontrar el conductor que circula por ella. Si hay una correspondencia entre estos dos aspectos, la conducción puede hacerse de modo continuo, sin sobresaltos, lo que incide favorablemente sobre la seguridad en la circulación. Si bien hay una serie de recomendaciones desde el punto de vista geométrico para obtener trazados consistentes, esto no siempre se logra, y sólo en los últimos años se ha iniciado el estudio de metodologías para evaluar ésto, tanto en vías existentes como en vías proyectadas. La mayor parte de estas metodologías sólo considera el trazado en planta, olvidándose del trazado en alzado y de la coordinación entre los mismos. En esta Tesis doctoral se ha desarrollado una metodología para evaluar la consistencia del trazado en carreteras interurbanas de dos carriles que considera dichos aspectos. Para ello, se hizo un análisis exhaustivo de los índices de trazado, los cuales evalúan las características geométricas en planta y en alzado. Los índices se correlacionaron con la accidentalidad, para determinar cuál de ellos tiene mayor incidencia, encontrándose que es el cambio de curvatura vertical (VCCR); a este índice se le estableció un rango de calificación. Como elemento de evaluación complementario de análisis se seleccionó el perfil de velocidades de operación, procedimiento que ha sido probado en diferentes investigaciones, y del cual se desarrolló un modelo aplicado a Colombia. Para la coordinación de trazados en planta y alzado se evaluaron diferentes combinaciones geométricas, algunas de las cuales generaron reapariciones del trazado. Se ha definido un nuevo índice (Irt) que permite determinar numéricamente la posibilidad de que se presente esta situación, indeseable desde el punto de vista de la seguridad vial. La combinación de estos tres elementos permite una evaluación integral de los diferentes aspectos que inciden sobre la consistencia del trazado de una carretera. La metodología desarrollada se aplicó en el estudio de consistencia del trazado en algunas carreteras españolas y colombianas, ubicadas en distintos tipos de terreno. ABSTRACT Geometric Design Consistency can be defined as the relationship between the geometric characteristics of a road and what the driver expects to find when driving. If there is a correspondence between these two aspects, driving is smoother and unexpected events are minimized, which increases traffic safety conditions. Although from the geometric point of view there are several recommendations to ensure consistent designs, this is not always successfully applied. The study of methods to evaluate design consistency in existing and future routes has only begun in recent years. Most existing methods only consider the horizontal alignment of the road and overlook both the vertical alignment and the coordination that must exist between the vertical and the horizontal. The present Doctoral Thesis proposes a method to evaluate the geometric design consistency of a two-lane rural highway which considers all three of these aspects: the horizontal alignment, the vertical alignment and the coordination that must exist between them. In order to achieve this, several different alignment indices, that evaluate horizontal and vertical geometric characteristics, were thoroughly analyzed to determine their correlation with traffic accidents. The Vertical Curvature Change Rate (VCCR) index showed the highest correlation, and rating thresholds for this index have been established. To complement the evaluation, the operating speed profile, was chosen. This procedure has been extensively tested by several researchers. An operating speed prediction model adapted to Colombia was developed. To study the coordination between the horizontal and the vertical alignments of the road, several geometric combinations of the two were used. Some of these combinations generate undesirable losses of visibility. For this reason, a new index (Irt) was defined to numerically detect those cases, which are undesirable from the point of view of traffic safety. The combination of these three factors allows a comprehensive evaluation of the different aspects that affect the geometric design consistency of a highway. The methodology was applied to some Spanish and Colombian roads located in different types of terrain.

Dynamic analysis of road vehicle-bridge systems under turbulent wind by means of Finite Element Models

When an automobile passes over a bridge dynamic effects are produced in vehicle and structure. In addition, the bridge itself moves when exposed to the wind inducing dynamic effects on the vehicle that have to be considered. The main objective of this work is to understand the influence of the different parameters concerning the vehicle, the bridge, the road roughness or the wind in the comfort and safety of the vehicles when crossing bridges. Non linear finite element models are used for structures and multibody dynamic models are employed for vehicles. The interaction between the vehicle and the bridge is considered by contact methods. Road roughness is described by the power spectral density (PSD) proposed by the ISO 8608. To consider that the profiles under right and left wheels are different but not independent, the hypotheses of homogeneity and isotropy are assumed. To generate the wind velocity history along the road the Sandia method is employed. The global problem is solved by means of the finite element method. First the methodology for modelling the interaction is verified in a benchmark. Following, the case of a vehicle running along a rigid road and subjected to the action of the turbulent wind is analyzed and the road roughness is incorporated in a following step. Finally the flexibility of the bridge is added to the model by making the vehicle run over the structure. The application of this methodology will allow to understand the influence of the different parameters in the comfort and safety of road vehicles crossing wind exposed bridges. Those results will help to recommend measures to make the traffic over bridges more reliable without affecting the structural integrity of the viaduct

Integration of Timetable Planning and Rolling Stock in Rapid Transit Networks

The aim of this paper is to propose an integrated planning model to adequate the offered capacity and system frequencies to attend the increased passenger demand and traffic congestion around urban and suburban areas. The railway capacity is studied in line planning, however, these planned frequencies were obtained without accounting for rolling stock flows through the rapid transit network. In order to provide the problem more freedom to decide rolling stock flows and therefore better adjusting these flows to passenger demand, a new integrated model is proposed, where frequencies are readjusted. Then, the railway timetable and rolling stock assignment are also calculated, where shunting operations are taken into account. These operations may sometimes malfunction, causing localized incidents that could propagate throughout the entire network due to cascading effects. This type of operations will be penalized with the goal of selectively avoiding them and ameliorating their high malfunction probabilities. Swapping operations will also be ensured using homogeneous rolling stock material and ensuring parkings in strategic stations. We illustrate our model using computational experiments drawn from RENFE (the main Spanish operator of suburban passenger trains) in Madrid, Spain. The results show that through this integrated approach a greater robustness degree can be obtained

Sustainable Air Traffic Management System Development Methodology

As it is defined in ATM 2000+ Strategy (Eurocontrol 2001), the mission of the Air Traffic Management (ATM) System is: “For all the phases of a flight, the ATM system should facilitate a safe, efficient, and expedite traffic flow, through the provision of adaptable ATM services that can be dimensioned in relation to the requirements of all the users and areas of the European air space. The ATM services should comply with the demand, be compatible, operate under uniform principles, respect the environment and satisfy the national security requirements.” The objective of this paper is to present a methodology designed to evaluate the status of the ATM system in terms of the relationship between the offered capacity and traffic demand, identifying weakness areas and proposing solutions. The first part of the methodology relates to the characterization and evaluation of the current system, while a second part proposes an approach to analyze the possible development limit. As part of the work, general criteria are established to define the framework in which the analysis and diagnostic methodology presented is placed. They are: the use of Air Traffic Control (ATC) sectors as analysis unit, the presence of network effects, the tactical focus, the relative character of the analysis, objectivity and a high level assessment that allows assumptions on the human and Communications, Navigation and Surveillance (CNS) elements, considered as the typical high density air traffic resources. The steps followed by the methodology start with the definition of indicators and metrics, like the nominal criticality or the nominal efficiency of a sector; scenario characterization where the necessary data is collected; network effects analysis to study the relations among the constitutive elements of the ATC system; diagnostic by means of the “System Status Diagram”; analytical study of the ATC system development limit; and finally, formulation of conclusions and proposal for improvement. This methodology was employed by Aena (Spanish Airports Manager and Air Navigation Service Provider) and INECO (Spanish Transport Engineering Company) in the analysis of the Spanish ATM System in the frame of the Spanish airspace capacity sustainability program, although it could be applied elsewhere.

Real time passenger information systems and quality of bus services

One of the main problems in urban areas is the steady growth in car ownership and traffic levels. Therefore, the challenge of sustainability is focused on a shift of the demand for mobility from cars to collective means of transport. For this end, buses are a key element of the public transport systems. In this respect Real Time Passenger Information (RTPI) systems help citizens change their travel behaviour towards more sustainable transport modes. This paper provides an assessment methodology which evaluates how RTPI systems improve the quality of bus services in two European cities, Madrid and Bremerhaven. In the case of Madrid, bus punctuality has increased by 3%. Regarding the travellers perception, Madrid raised its quality of service by 6% while Bremerhaven increased by 13%. On the other hand, the users ́ perception of Public Transport (PT) image increased by 14%.

Neighborhood mobility: A Long-Gone Pardigm? Approaching proximity and land use mix using data from home based surveys.

El WCTR es un congreso de reconocido prestigio internacional en el ámbito de la investigación del transporte y aunque las actas publicadas están en formato digital y sin ISSN ni ISBN, lo consideramos lo suficientemente importante como para que se considere en los indicadores. Policies trying to increase walking within urban mobility modal split usually highlight the importance of the functional patterns and the environmental quality of the urban space as major drivers of citizens modal choices. Functional characteristics would be mainly associated to an appropriate mix of land uses within neighbourhoods, whereas environmental quality would be associated to the characteristics of urban spaces. The purpose of this research is threefold: first, to identify relevant proxy indicators, which could characterize pedestrian-friendly land use mix and environmental quality. Second, to assess, for both traits, existing disparities among neighbourhoods in a major metropolitan area. And finally, to explore the association between both indicators and children mobility patterns: according to their built environment, which neighbourhoods have a greater proportion of children and, how is their mobility? Using data from the 2004 household mobility survey in the 128 neighbourhoods of the municipality of Madrid, this paper concludes that potentially favourable conditions at the neighbourhood level seem to have only a modest influence in,mobility patterns , in terms of both, selection of closer destinations and a higher share of walking within modal split. The citys policy choices, with intensive investment in road and public transport infrastructure may explain why short-distance mobility is not as important as it could have been expected in those neighbourhoods with more pedestrian-friendly conditions. The metropolitan transport system is providing mobility conditions, which make far-away destinations attractive to most citizens.

Generating descriptions that summarize geospatial and temporal data

Effective data summarization methods that use AI techniques can help humans understand large sets of data. In this paper, we describe a knowledge-based method for automatically generating summaries of geospatial and temporal data, i.e. data with geographical and temporal references. The method is useful for summarizing data streams, such as GPS traces and traffic information, that are becoming more prevalent with the increasing use of sensors in computing devices. The method presented here is an initial architecture for our ongoing research in this domain. In this paper we describe the data representations we have designed for our method, our implementations of components to perform data abstraction and natural language generation. We also discuss evaluation results that show the ability of our method to generate certain types of geospatial and temporal descriptions.

Evaluación del ruido ambiental en espacios naturales protegidos: implicaciones para su gestión

Esta Tesis Doctoral trata sobre la caracterización acústica de los ecosistemas naturales y la evaluación del impacto ambiental del ruido antropogénico sobre sus potenciales receptores en estos lugares, incluidos los receptores no humanos y sus efectos ecológicos, además, analiza las implicaciones para su gestión a distintas escalas y se lleva a cabo una valoración económica. Este trabajo ofrece soluciones para caracterizar los paisajes sonoros de forma compatible con distintas escalas de trabajo, nivel de esfuerzo técnico y en contextos de recursos limitados que haga viable su tratamiento como cualquier otra variable ambiental en el ámbito de la conservación y gestión del medio natural. Se han adaptado herramientas y metodologías propias de disciplinas como la acústica ambiental, bioacústica y ecología del paisaje, para servir a los objetivos específicos de la evaluación y gestión de los paisajes sonoros y el ruido ambiental en amplias extensiones geográficas. Se ha establecido un método general de muestreo sistemático para trabajo de campo y también se han adaptado métodos de modelización informática, que permiten analizar escenarios sonoros dinámicos en el tiempo y en el espacio, desde localizaciones puntuales hasta la escala del paisaje. Es posible elaborar cartografía ambiental con esta información y se ha representado gráficamente la zona de influencia de distintas fuentes de ruido sobre la calidad de distintos hábitats faunísticos. Se recomienda el uso del indicador del nivel de presión sonora equivalente (Leq) por su operatividad en medición y modelización, y su adaptabilidad a cualquier dimensión espacial y temporal que se requiera, por ejemplo en función del paisaje, actividades o especies que se establezcan como objeto de análisis. Se ha comprobado que las voces y conversaciones de parte de los excursionistas en zonas de reposo, observación y descanso (Laguna Grande de Peñalara) es la fuente de ruido que con mayor frecuencia identifican los propios visitantes (51%) y causa un incremento del nivel de presión sonora equivalente de unos 4,5 dBA sobre el nivel correspondiente al ambiente natural (Lnat). También se ha comprobado que carreteras con bajo nivel de tráfico (IMD<1000) pueden causar estrés fisiológico sobre la fauna y afectar a la calidad de sus hábitats. La isófona de 30 dBA del índice Leq (24h) permite dividir a los corzos de la zona de estudio en dos grupos con diferente nivel de estrés fisiológico, más elevado en los que se sitúan más cerca de la carretera con mayor volumen de tráfico y se expone a mayores niveles de ruido. Por otro lado, ha sido posible delimitar una zona de exclusión para la nidificación de buitre negro alrededor de las carreteras, coincidente con la isófona Leq (24h) de 40 dBA que afecta al 11% de su hábitat potencial. Además se ha llevado a cabo una novedosa valoración económica de la contaminación acústica en espacios naturales protegidos, mediante el análisis de la experiencia sonora de los visitantes del antiguo Parque Natural de Peñalara, y se ha constatado su disposición al pago de una entrada de acceso a estos lugares (aproximadamente 1 euro) si redundara en una mejora de su estado de conservación. En conclusión, los espacios naturales protegidos pueden sufrir un impacto ambiental significativo causado por fuentes de ruido localizadas en su interior pero también lejanas a ellos, que se sitúan fuera del ámbito de competencias de sus gestores. Sucesos sonoros como el sobrevuelo de aviones pueden incrementar en aproximadamente 8 dBA el nivel de referencia Lnat en las zonas tranquilas del parque. Se recomienda llevar a cabo una gestión activa del medio ambiente sonoro y se considera necesario extender la investigación sobre los efectos ecológicos del ruido ambiental a otros lugares y especies animales. ABSTRACT This PhD Thesis deals with acoustic characterization of natural ecosystems and anthropogenic noise impact assessment on potential receivers, including non-human receivers and their ecological effects. Besides, its management implications at different scales are analyzed and an economic valuation is performed. This study provides solutions for characterizing soundscapes in a compatible way with different working scales, level of technical effort and in a context of limited resources, so its treatment becomes feasible as for any other environmental variable in conservation and environmental management. Several tools and methodologies have been adapted from a variety of disciplines such as environmental acoustics, bioacoustics and landscape ecology, to better serve the specific goals of assessing and managing soundscapes and environmental noise in large areas. A procedure has been established for systematic field measurement surveys and noise common computer modelling methods have also been adapted in order to analyze dynamic soundscapes across time and space, from local to landscape scales. It is possible to create specific thematic cartography as for instance delimiting potential influence zone from different noise sources on animal habitats quality. Use of equivalent continuous sound pressure level index (Leq) is recommended because it provides great flexibility in operation for noise measurement and modelling, and because of its adaptability to any required temporal and spatial dimension, for instance landscape, activities or the target species established as study subjects. It has been found that human voices and conversations in a resting and contemplation area (Laguna Grande de Peñalara) is the most frequently referred noise source by national park visitors (51 %) when asked. Human voices alter this recreational area by increasing the sound pressure level approximately 4.5 dBA over the natural ambient level (Lnat). It has also been found that low traffic roads (AADT<1000 ) may cause physiological stress on wildlife and affect the quality of their habitats. It has also been possible to define a road-effect zone by noise mapping, which suggests an effective habitat loss within the Leq (24h) 30 dBA isophone in case of Roe deer and also divide the study area in two groups with different physiological stress level, higher for those exposed to higher noise levels and traffic volume. On the other hand, it has been possible to determine an exclusion area for Cinereous vulture nesting surrounding roads which is coincident with the Leq (24h) 40 dBA isophone and affects 11 % of the vulture potential habitat. It has also been performed an economic estimation of noise pollution impact on visitors’ perception and results showed that visitors would be willing to pay an entrance fee of approximately 1 euro if such payment is really bringing an improvement of the conservation status. In conclusion, protected areas may be significantly affected by anthropogenic noise sources located within the park borders but perturbations may also be caused by large-distance noise sources outside the park managers’ jurisdiction. Aircraft overflight events disrupted quietness and caused Leq increases of almost 8 dBA during a monitoring period with respect to Lnat reference levels in the park quiet areas. It is recommended to actively manage the acoustic environment. Finally, further research on ecological impacts of environmental noise needs to be extended to other species and places.

Neighbourhood mobility: a longgone Paradigm? Approaching "proximity" and "land use mix" using data from home-based surveys

Policies trying to increase walking within urban mobility modal split usually highlight the importance of the functional patterns and the environmental quality of the urban space as major drivers of citizens modal choices. Functional characteristics would be mainly associated to an appropriate mix of land uses within neighbourhoods, whereas environmental quality would be associated to the characteristics of urban spaces. The purpose of this research is threefold: first, to identify relevant proxy indicators, which could characterize pedestrian-friendly land use mix and environmental quality. Second, to assess, for both traits, existing disparities among neighbourhoods in a major metropolitan area. And finally, to explore the association between both indicators and children mobility patterns: according to their built environment, which neighbourhoods have a greater proportion of children and, how is their mobility? Using data from the 2004 household mobility survey in the 128 neighbourhoods of the municipality of Madrid, this paper concludes that potentially favourable conditions at the neighbourhood level seem to have only a modest influence in,mobility patterns , in terms of both, selection of closer destinations and a higher share of walking within modal split. The city s policy choices, with intensive investment in road and public transport infrastructure may explain why short-distance mobility is not as important as it could have been expected in those neighbourhoods with more pedestrian-friendly conditions. The metropolitan transport system is providing mobility conditions, which make far-away destinations attractive to most citizens.

Optimización del peaje en autopistas interurbanas que compiten con carreteras convencionales libres de pago : una perspectiva de eficiencia y equidad

En algunos países, como por ejemplo España, es común que entre un origen y un destino existan dos carreteras paralelas en las que existen ciertas diferencias. La más importante es que una de las vías es una autopista que ofrece a los usuarios una mayor comodidad y un menor tiempo de viaje a cambio del pago de un peaje, el cual no es necesario abonar en la carretera convencional paralela. Así, el problema de la tarificación vial ha sido estudiado en diversas ocasiones. Existe un amplio consenso en que para lograr el máximo bienestar social, los usuarios deben internalizar las externalidades que producen y no perciben a través de un peaje. Sin embargo, dicho peaje puede perjudicar a los usuarios con bajos ingresos. Dependiendo del objetivo (por ejemplo, maximizar el bienestar, maximizar la equidad social, la amortización de la construcción de la carretera, etc) el peaje óptimo podría variar sustancialmente. La literatura académica acerca de los peajes, la eficiencia y la equidad es vasta y diversa. Sin embargo, hemos encontrado una deficiencia en dicha literatura sobre el peaje óptimo, en corredores donde una carretera y una autopista con diferentes características de calidad compiten para capturar el tráfico. Particularmente no se ha encontrado ninguna investigación acerca del establecimiento del peaje que maximice el bienestar social o la equidad para distintas distribuciones del valor del tiempo de viaje (VTT), caracterizadas por su media y varianza. Por ello, el principal objetivo de la investigación es estimar la influencia que tiene la distribución de la renta de una sociedad sobre el peaje óptimo. La presente tesis doctoral trata de obtener, por medio de una metodología robusta, las diferentes políticas de peajes que los planificadores de transporte deberían llevar a cabo según la riqueza y cohesión social de los potenciales usuarios del corredor, la demanda y el objetivo que se busque con dicha tarificación, esto es, maximizar el bienestar social o la equidad. Adicionalmente también se obtienen los peajes óptimos dependiendo de si el corredor se encuentra totalmente tarificado o únicamente se debe pagar un peaje por circular en la autopista. In some countries, such as Spain, it is very common that in the same corridor there are two roads with the same origin and destination but with some differences. The most important contrast is that one is a toll highway which offers a better quality than the parallel road in exchange of a price. The users decide if the price of the toll worth to pay for the advantages offered. The problem of road pricing has been largely studied. It is well acknowledged that in order to achieve the maximum social welfare, users must internalize the externalities they produce and do not perceive through a toll. However, that toll can harm users with low income. Depending on the objective (e.g. maximize welfare, maximize social equity, amortize the construction of the road, etc) the optimal toll might vary substantially. The academic literature about pricing, efficiency and equity is vast and diverse. However, as far as we have found, there is a gap in the literature regarding the optimal price where a road and a highway with different quality characteristics compete for capturing the traffic in a corridor. Particularly we did not find any research estimating the optimal welfare price or the optimal equity price for different Value of Travel Time (VTT) distributions characterized by different VTT average and variance. The objective of the research is to fill this gap. In this research a theoretical model in order to obtain the optimal price in a toll highway that competes for capturing the traffic with a conventional road is developed. This model is done from the welfare and equity perspective and for non‐usual users who decide over the expectation of free flow conditions. The model is finally applied to the variables we want to focus on: average value of travel time (VTT) which is strongly related with income, dispersion of this VTT, different kind of distributions of VTT and traffic levels, from free flow to congestion. Furthermore, we also obtain the optimal tolls with the corridor completely charged or with untolled alternative.

Urban trees and atmospheric pollutants in big cities: Effects in Madrid

Una investigación sobre la mejora de la contaminación del aire (CA) por medio de arbolado urbano se realizó en Madrid, una ciudad con casi 4 M de habitantes, 2,8 M de vehículos y casi 3 M de árboles de mantenimiento público. La mayoría de los árboles estaban en dos bosques periurbanos. Los 650.000 restantes era pies de alineación y parques. Los taxones estudiados fueron Platanus orientalis (97.205 árboles), Ulmus sp. (70.557), Pinus pinea (49.038), Aesculus hippocastanum (22.266), Cedrus sp. (13.678) y Quercus ilex (1.650), de calles y parques. Muestras foliares se analizaron en diferentes épocas del año, así como datos de contaminación por PM10 de 28 estaciones de medición de la contaminación durante 30 años, y también la intensidad del tráfico (IMD) en 2.660 calles. La acumulación de metales pesados (MP) sobre hojas y dentro de estas se estimó en relación con la CA y del suelo y la IMD del tráfico. La concentración media de Ba, Cd, Cr, Cu, Mn, Ni, Pb y Zn en suelo (materia seca) alcanzó: 489,5, 0,7, 49,4, 60,9, 460,9, 12,8, 155,9 y 190,3 mg kg-1 respectivamente. Los árboles urbanos, particularmente coníferas (debido a la mayor CA en invierno) contribuyen significativamente a mejorar la CA sobre todo en calles con alta IMD. La capacidad de las seis sp. para capturar partículas de polvo en su superficies foliares está relacionada con la IMD del tráfico y se estimó en 16,8 kg/año de MP tóxicos. Pb y Zn resultaron ser buenos marcadores antrópicos en la ciudad en relación con el tráfico, que fue la principal fuente de contaminación en los árboles y suelos de Madrid. Las especies de árboles variaron en función de su capacidad para capturar partículas (dependiendo de las propiedades de sus superficies foliares) y acumular los MP absorbidos de los suelos. Las concentraciones foliares de Pb y Zn estuvieron por encima de los límites establecidos en diferentes sitios de la ciudad. La microlocalización de Zn mediante microscópico mostró la translocación al xilema y floema. Se detectaron puntos de contaminación puntual de Cu and Cr en antiguos polígonos industriales y la distribución espacial de los MP en los suelos de Madrid mostró que en incluso en zonas interiores del El Retiro había ciertos niveles elevados de [Pb] en suelo, tal vez por el emplazamiento la Real Fábrica de Porcelana en la misma zona hace 200 años. Distintas áreas del centro de la ciudad también alcanzaron niveles altos de [Pb] en suelo. Según los resultados, el empleo de una combinación de Pinus pinea con un estrato intermedio de Ulmus sp. y Cedrus sp. puede ser la mejor recomendación como filtro verde eficiente. El efecto del ozono (O3) sobre el arbolado en Madrid fue también objeto de este estudio. A pesar de la reducción de precursores aplicada en muchos países industrializados, O3 sigue siendo la principal causa de CA en el hemisferio norte, con el aumento de [O3] de fondo. Las mayores [O3] se alcanzaron en regiones mediterráneas, donde el efecto sobre la vegetación natural es compensado por el xeromorfismo y la baja conductancia estomática en respuesta los episodios de sequía estival característicos de este clima. Durante una campaña de monitoreo, se identificaron daños abióticos en hojas de encina parecidos a los de O3 que estaban plantadas en una franja de césped con riego del centro de Madrid. Dada la poca evidencia disponible de los síntomas de O3 en frondosas perennifolias, se hizo un estudio que trató de 1) confirman el diagnóstico de daño de O3, 2) investigar el grado de los síntomas en encinas y 3) analizar los factores ambientales que contribuyeron a los daños por O3, en particular en lo relacionado con el riego. Se analizaron los marcadores macro y micromorfológicos de estrés por O3, utilizando las mencionadas encinas a modo de parcela experimental. Los síntomas consistieron en punteado intercostal del haz, que aumentó con la edad. Además de un punteado subyacente, donde las células superiores del mesófilo mostraron reacciones características de daños por O3. Las células próximas a las zonas dañadas, presentaron marcadores adicionales de estrés oxidativo. Estos marcadores morfológicos y micromorfológicos de estrés por O3 fueron similares a otras frondosas caducifolias con daños por O3. Sin embargo, en nuestro caso el punteado fue evidente con AOT40 de 21 ppm•h, asociada a riego. Análisis posteriores mostraron que los árboles con riego aumentaron su conductancia estomática, con aumento de senescencia, manteniéndose sin cambios sus características xeromórficas foliares. Estos hallazgos ponen de relieve el papel primordial de la disponibilidad de agua frente a las características xeromórficas a la hora de manifestarse los síntomas en las células por daños de O3 en encina. ABSTRACT Research about air pollution mitigation by urban trees was conducted in Madrid (Spain), a southern European city with almost 4 M inhabitants, 2.8 M daily vehicles and 3 M trees under public maintenance. Most trees were located in two urban forests, while 650'000 trees along urban streets and in parks. The urban taxa included Platanus orientalis (97'205 trees), Ulmus sp. (70’557), Pinus pinea (49'038), Aesculus hippocastanum (22’266), Cedrus sp. (13'678 and Quercus ilex (1'650) along streets and parks. Leave samples were analysed sequentially in different seasons, PM10 data from 28 air monitoring stations during 30 years and traffic density estimated from 2’660 streets. Heavy metal (HM) accumulation on the leaf surface and within leaves was estimated per tree related to air and soil pollution, and traffic intensity. Mean concentration of Ba, Cd, Cr, Cu, Mn, Ni, Pb and Zn in topsoil samples (dry mass) amounted in Madrid: 489.5, 0.7, 49.4, 60.9, 460.9, 12.8, 155.9 and 190.3 mg kg-1 respectively. Urban trees, particularly conifers (due to higher pollution in winter) contributed significantly to alleviate air pollution especially near to high ADT roads. The capacity of the six urban street trees species to capture air-born dust on the foliage surface as related to traffic intensity was estimated to 16.8 kg of noxious metals from exhausts per year. Pb and Zn pointed to be tracers of anthropic activity in the city with vehicle traffic as the main source of diffuse pollution on trees and soils. Tree species differed by their capacity to capture air-borne dust (by different leaf surface properties) and to allocate HM from soils. Pb and Zn concentrations in the foliage were above limits in different urban sites and microscopic Zn revelation showed translocation in xylem and phloem tissue. Punctual contamination in soils by Cu and Cr was identified in former industrial areas and spatial trace element mapping showed for central Retiro Park certain high values of [Pb] in soils even related to a Royal pottery 200 years ago. Different areas in the city centre also reached high levels [Pb] in soils. According to the results, a combination of Pinus pinea with understorey Ulmus sp. and Cedrus sp. layers can be recommended for the best air filter efficiency. The effects of ozone (O3) on trees in different areas of Madrid were also part of this study. Despite abatement programs of precursors implemented in many industrialized countries, ozone remained the main air pollutant throughout the northern hemisphere with background [O3] increasing. Some of the highest ozone concentrations were measured in regions with a Mediterranean climate but the effect on the natural vegetation is alleviated by low stomatal uptake and frequent leaf xeromorphy in response to summer drought episodes characteristic of this climate. During a bioindication survey, abiotic O3-like injury was identified in foliage. Trees were growing on an irrigated lawn strip in the centre of Madrid. Given the little structural evidence available for O3 symptoms in broadleaved evergreen species, a study was undertaken in 2007 with the following objectives 1) confirm the diagnosis, 2) investigate the extent of symptoms in holm oaks growing in Madrid and 3) analyse the environmental factors contributing to O3 injury, particularly, the site water supply. Therefore, macro- and micromorphological markers of O3 stress were analysed, using the aforementioned lawn strip as an intensive study site. Symptoms consisted of adaxial and intercostal stippling increasing with leaf age. Underlying stippling, cells in the upper mesophyll showed HR-like reactions typical of ozone stress. The surrounding cells showed further oxidative stress markers. These morphological and micromorphological markers of ozone stress were similar to those recorded in deciduous broadleaved species. However, stippling became obvious already at an AOT40 of 21 ppm•h and was primarily found at irrigated sites. Subsequent analyses showed that irrigated trees had their stomatal conductance increased and leaf life-span reduced whereas their leaf xeromorphy remained unchanged. These findings suggest a central role of water availability versus leaf xeromorphy for ozone symptom expression by cell injury in holm oak.

How varies optimal welfare pricing with income distribution? The case of the untolled alternative.

In some countries, such as Spain, it is very common that in the same corridor there are two roads with the same origin and destination but with some differences. The most important contrast is that one is a toll highway which offers a better quality than the parallel road in exchange of a price. The users decide if the price of the toll is worth to pay for the advantages offered. This problem is known as the untolled alternative and it has been largely studied in the academic literature, particularly related to economic efficiency and the optimal welfare toll. However, there is a gap in the literature academic regarding how it affects income distribution to the optimal toll. The main objective of the paper is to fill this gap. In this paper a theoretical model in order to obtain the optimal welfare price in a toll highway that competes for capturing the traffic with a conventional road is developed. This model is done for non-usual users who decide over the expectation of free flow conditions. This model is finally applied to the variables we want to focus on: average value of travel time (VTT) which is strongly related with income, dispersion of this VTT and traffic levels, from free flow to congestion. Derived from the results, we conclude that the higher the average VTT the higher the optimal price, the higher the dispersion of this VTT the lower the optimal price and finally, the more the traffic the higher the optimal toll.