Analysis of chromium behaviour and speciation during the electrodialytic process

The interest in chromium (Cr) arises from the widespread use of this heavy metal in various industrial processes that cause its release as liquid, solid and gaseous waste into the environment. The impact of Cr on the environment and living organisms primarily depends on its chemical form, since Cr(III) is an essential micronutrient for humans, other animals and plants, and Cr(VI) is highly toxic and a known human carcinogen. This study aimed to evaluate if the electrodialytic process (ED) is an appropriate treatment for Cr removal, through a critical overview of Cr speciation, before and after the ED experiments, to assess possible Cr(III)-Cr(VI) interconversions during the treatment. ED was the treatment technique applied to two types of matrices containing Cr: chromate copper arsenate (CCA) contaminated soil and municipal solid waste incineration (MSWI) fly ash. In order to study Cr remediation, three EDR set-ups were used: a new set-up, the combined cell (2/3C or 3/2C), with three compartments, alternating current between two anodes and different initial experimental conditions, one set-up with three compartments (3C cell) and the other set-up with two compartments (2C cell). The Cr removal rates obtained in this study were between 10-36% for the soil, and 1-13% for the fly ash. The highest Cr removal rates were achieved in the 26 days experiments: 36% for the soil, 13% for the fly ash. Regarding the 13 days experiments, the highest Cr removal rates were attained with the 2/3C set-up: 24% for the soil, 5% for the fly ash. The analysis of Cr(VI) was performed before and after ED experiments to evaluate eventual changes in Cr speciation during the treatment. This analysis was conducted by two methods: USEPA Method 3060A, for the extraction of Cr(VI); and Hach Company Method 8023, for the detection of Cr(VI). Despite the differences in Cr total concentration, both matrices presented a similar speciation, with Cr(III) being the main species found and Cr(VI) less than 3% of Cr total, before and after the treatment. For fly ash, Cr(VI) was initially below the detection limit of the method and remained that way after the treatment. For soil, Cr(VI) decreased after the treatment. Oxidation of Cr(III) to Cr(VI) did not occur during the ED process since there was no increase in Cr(VI) in the matrices after the treatment. Hence, the results of this study indicate that ED is an appropriate technique to remediate matrices containing Cr because it contributes to Cr removal, without causing Cr(III)-Cr(VI) interconversions.

Development of process control strategies exploiting knowledge from systems biology: application to MDCK suspension cells

Madine Darby Canine Kidney (MDCK) cell lines have been extensively evaluated for their potential as host cells for influenza vaccine production. Recent studies allowed the cultivation of these cells in a fully defined medium and in suspension. However, reaching high cell densities in animal cell cultures still remains a challenge. To address this shortcoming, a combined methodology allied with knowledge from systems biology was reported to study the impact of the cell environment on the flux distribution. An optimization of the medium composition was proposed for both a batch and a continuous system in order to reach higher cell densities. To obtain insight into the metabolic activity of these cells, a detailed metabolic model previously developed by Wahl A. et. al was used. The experimental data of four cultivations of MDCK suspension cells, grown under different conditions and used in this work came from the Max Planck Institute, Magdeburg, Germany. Classical metabolic flux analysis (MFA) was used to estimate the intracellular flux distribution of each cultivation and then combined with partial least squares (PLS) method to establish a link between the estimated metabolic state and the cell environment. The validation of the MFA model was made and its consistency checked. The resulted PLS model explained almost 70% of the variance present in the flux distribution. The medium optimization for the continuous system and for the batch system resulted in higher biomass growth rates than the ones obtained experimentally, 0.034 h-1 and 0.030 h-1, respectively, thus reducing in almost 10 hours the duplication time. Additionally, the optimal medium obtained for the continuous system almost did not consider pyruvate. Overall the proposed methodology seems to be effective and both proposed medium optimizations seem to be promising to reach high cell densities.

User-centric product derivation in software product lines

Software Product Line (SPL) engineering aims at achieving efficient development of software products in a specific domain. New products are obtained via a process which entails creating a new configuration specifying the desired product’s features. This configuration must necessarily conform to a variability model, that describes the scope of the SPL, or else it is not viable. To ensure this, configuration tools are used that do not allow invalid configurations to be expressed. A different concern, however, is making sure that a product addresses the stakeholders’ needs as best as possible. The stakeholders may not be experts on the domain, so they may have unrealistic expectations. Also, the scope of the SPL is determined not only by the domain but also by limitations of the development platforms. It is therefore possible that the desired set of features goes beyond what is possible to currently create with the SPL. This means that configuration tools should provide support not only for creating valid products, but also for improving satisfaction of user concerns. We address this goal by providing a user-centric configuration process that offers suggestions during the configuration process, based on the use of soft constraints, and identifying and explaining potential conflicts that may arise. Suggestions help mitigating stakeholder uncertainty and poor domain knowledge, by helping them address well known and desirable domain-related concerns. On the other hand, automated conflict identification and explanation helps the stakeholders to understand the trade-offs required for realizing their vision, allowing informed resolution of conflicts. Additionally, we propose a prototype-based approach to configuration, that addresses the order-dependency issues by allowing the complete (or partial) specification of the features in a single step. A subsequent resolution process will then identify possible repairs, or trade-offs, that may be required for viabilization.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Implementation of membrane processes for improvement of the detection of food contaminants

The EM3E Master is an Education Programme supported by the European Commission, the European Membrane Society (EMS), the European Membrane House (EMH), and a large international network of industrial companies, research centres and universities (http://www.em3e.eu)

On the labor share the long-run equilibrium and its adjustment process

This research computes an Equilibrium Labor Share using a VECM for a panel of 19 countries, analyzes what determines the speed at which the labor share adjusts towards that equilibrium and decomposes this adjustment in terms of real wages and employment. Results suggest that the speed at which a country adjusts decreases with employment protection legislation and labor taxes. Most countries’ labor shares adjustment is made through real wages changes instead of changing employment, suggesting that wage moderation policies may play an important role on the adjustment process without harming employment. Keywords: Equilibrium

Sexing the human skull through the mastoid process

OBJECTIVE: The purpose of this study was to evaluate the significance for sex determination of the measurement of the area formed by the xerographic projection of 3 craniometric points related to the mastoid process: the porion, asterion, and mastoidale points. METHOD: Sixty skulls, 30 male and 30 female, were analyzed. A xerographic copy of each side of the skull was obtained. On each xerographic copy, the craniometric points were marked to demarcate a triangle. The area (mm²) of the demarcated triangle for each side of the skull (right (D) and left (E) sides) was determined, and the total value of these measures (T) was calculated. RESULTS: Concerning the right area of the male and female skulls, 60% of the values overlapped; for the left area, 51.67% overlapped, and for the total area, 36.67% overlapped. The analysis of the differences between the sexes in the areas studied was significant for the 3 areas. Regarding the total area, which is the preferred measurement because of the asymmetry between the sides of the skull, the value of the mean was 1505.32 mm² for male skulls, which was greater than the maximum value obtained in the female skulls. The value of the mean for female skulls was 1221.24 mm², less than the minimum value obtained for the male skulls. CONCLUSIONS: This study demonstrates a significant result in the 3 studied areas, (D), (E), and (T). The total area values show less overlapping of values between the sexes, and therefore can be used for sexing human skulls. For the population studied, values of the total area that were greater than or equal to 1447.40 mm² belonged to male crania (95% confidence). Values for this area that were less than or equal to 1260.36 mm² belonged to female crania (95% confidence).

On the labor share the long-run equilibrium and its adjustment process

This research computes an Equilibrium Labor Share using a VECM for a panel of 19 countries, analyzes what determines the speed at which the labor share adjusts towards that equilibrium and decomposes this adjustment in terms of real wages and employment. Results suggest that the speed at which a country adjusts decreases with employment protection legislation and labor taxes. Most countries’ labor shares adjustment is made through real wages changes instead of changing employment, suggesting that wage moderation policies may play an important role on the adjustment process without harming employment.

Analysis of a controversial decision process: the case of the pumped hydro storage power plant Atdorf in Germany

Based on the report for the unit “Métodos Interactivos de Participação e Decisão A” (Interactive methods of participation and decision A), coordinated by Prof. Lia Maldonado Teles de Vasconcelos and Prof. Nuno Miguel Ribeiro Videira Costa. This unit was provided for the PhD Program in Technology Assessment in 2015/2016.

The interception process in tropical rain forests: a literature review and critique (*).

A review of the literature on measurements of rain water interception processes by forests is made. Information on Africa, Central and South America, and Asia is given. A general analysis is made and the need to further the measurements under field conditions is stressed.

The role of α2,3- and α2,6-sialylation

RESUMO: Os glicoconjugados que decoram a superfície celular e os lípidos e proteínas secretados ocupam o ponto de encontro onde normalmente ocorrem interacções críticas homólogas (hospedeiro-hospedeiro) e heterólogas (hospedeiro-patogénio). Apesar de ser largamente aceite que os glicanos são parte integrante do processo de imunidade, continua a não ser claro qual o papel que os glicanos, em toda a sua diversidade, tomam no quadro geral da imunidade. Os glicanos, que são frequentemente terminados por resíduos de ácido siálico, podem ser alterados por factores externos, tais como patogénios, ou por acontecimentos fisiológicos celulares específicos. Normalmente em posição terminal, as glico-estruturas que contêm ácido siálico assumem um papel fundamental numa quantidade substancial de receptores imunes envolvidos na adesividade e tráfico celular, tal como as Selectinas e as Siglecs, das quais se sabe apresentarem uma relevante função imune. À altura do início desta tese, era sabido que os ácidos siálicos expressos à superfície das células poderiam modular mecanismos importantes nas respostas imunes adaptativas. Considerando a posição de charneira que as células dendríticas (DCs) ocupam na transição da resposta imune inata para a adaptativa, antecipámos que os ácidos siálicos poderiam também modular mecanismos relevantes nas DCs humanas. As DCs têm uma função muito relevante na verificação e captura antigénica, migração para os gânglios linfáticos e apresentação antigénica aos linfócitos, uma sequência de funções que conduz, em ultima instância, à indução da resposta inata adaptativa. Considerando estas premissas, a nossa hipótese principal foi que os ácidos siálicos podem influenciar funções relevantes das DCs, tais como captura de antigénios, maturação, migração para os gânglios linfáticos e apresentação antigénica às células Para testar esta hipótese, dividimos o trabalho em quatro partes: 1) Analisámos os glicanos sialilados de superfície, expressos durante a diferenciação de monócitos humanos em DCs (moDCs). Os nossos dados mostraram que a expressão dos glicanos com ligações em O (O-glicanos) e sialilados em α2,3, assim como glicanos com ligações em N (N-glicanos) sialilados em α2,6 e α2,3 aumentou durante o processo de diferenciação das moDCs. Contribuindo para esta nova configuração glicosídica, três sialiltransferases (STs) poderão estar envolvidas: a ST6Gal-1 correlaciona-se com a expressão aumentada de N-glicanos sialilados em α2,6; a ST3Gal-1 contribui para a sialilação em α2,3 de O-glicanos, em especial de antigénios T; e a ST3Gal-4 poderá ser responsável pelo aumento de N-glicanos sialilados em α2,3. Após estímulo e consequente maturação das moDCs, ambos os níveis de expressão génica de ST6Gal-1 e ST3Gal-4 são negativamente modificados sendo, também, que a expressão de ST3Gal-1 varia consoante o estímulo. 2) Estudámos posteriormente as consequências da modulação dos ácidos siálicos de superfície nas funções das DCs. Observámos que a remoção dos ácidos siálicos de superfície diminui significativamente a capacidade de macropinocitose e endocitose mediada por receptores nas moDCs. Em contrapartida, o tratamento com sialidase aumentou significativamente a capacidade das moDCs para fagocitar Escherichia coli. Determinou-se também que este mecanismo requer a existência de ácido siálico presente nas E. coli indicando um mecanismo de interacção hospedeiro-patogénio dependente de ácido siálico em ambas as partes envolvidas. As moDCs tratadas com sialidase também apresentam um nível superior de expressão de moléculas de MHC e moléculas co-estimulatórias, sugerindo um fenótipo celular mais maduro. Recorrendo ao modelo de ratinho, utilizaram-se DCs derivadas de células da medula (BMDCs) de ratinhos deficientes em ST3Gal-1 e ST6Gal-1. Estes ensaios revelaram que quer a endocitose quer a maturação são influenciadas por modificações 37 nos glicanos sialilados em α2,3 ou α2,6. A detecção e quantificação de proteínas Nglicosiladas e sialiladas em α2,6 apontou para um potencial envolvimento de integrinas β2 nestes mecanismos. 3) O efeito da sialilação em α2,6 na migração das DCs para os gânglios linfáticos foi também analisado. Observámos que BMDCs deficientes para ST6Gal-1 apresentam uma redução de cerca de 50% nos níveis de migração das DCs para os gânglios linfáticos, tal como aferido em ensaios de inflamação in situ e estudos de transferência adoptiva de células. Uma redução dos níveis deste tipo de migração foi também observada quando BMDCs nativas foram transferidas para ratinhos receptores deficientes em ST6Gal-1. São, contudo, necessários mais ensaios de forma a identificar as moléculas envolvidas neste processo. 4) Por último, analisámos o impacto da sialilação na estimulação antigénica das DCs às células T. Assim, concluiu-se que moDCs tratadas com sialidase apresentam um nível de expressão superior de IL-12, TNF-ɑ, IL-6 e IL-10, e activação do factor de transcrição nuclear kappa B (NF-κB). As DCs tratadas com sialidase induziram uma maior proliferação nas células T, com expressão correspondente de interferão-γ. Este dado sugere que a remoção de ácidos siálicos de superfície contribui para o desenvolvimento de uma resposta pro-inflamatória do tipo 1 por células T auxiliares (resposta Th1). Considerando estes dados no seu todo, concluímos que o ácido siálico tem um papel marcante nas funções imunes das DCs. Alterações à concentração de ácido siálico à superfície das células podem alterar a endocitose/fagocitose, maturação, migração para os tecidos e gânglios linfáticos e capacidade estimulatória para com as células T. Complementando estes dados, as ligações glicosídicas de ácidos siálicos criados por ST6Gal-1 e ST3Gal-1 são funcionalmente relevantes. A modulação programada da sialilação do glicocálice, mediada por sialidases individuais ou sialiltransferases é uma possibilidade aceitável para a melhoria da fagocitose por DCs e da sua potência imunológica. Este facto tem um significado particular para imunoterapias baseadas em DCs, podendo provar-se decisivo para a sua eficiência e aplicabilidade num futuro muito próximo.-------------------------------ABSTRACT: Glycans decorating cell surface and secreted proteins and lipids occupy the junction where critical host–host and host-pathogen interactions occur. In spite of the wide acceptance that glycans are centrally implicated in immunity, exactly how glycans and their variety and variability contribute to the overall immune response remains poorly defined. Glycans, frequently terminated by sialic acid residues, may be modified by external factors such as pathogens or upon specific physiological cellular events. The terminal, privileged positions of sialic acid-modified structures makes them key, fundamental determinants for a number of immune receptors with known involvement in cellular adhesiveness and cell trafficking, such as Selectins and Siglecs, with known relevant immune functions. At the time this thesis was initiated, it was established that sialic acids expressed at cell surface could modulate important mechanisms of the adaptive immune responses. Given the key role of dendritic cells (DCs) in the transition from innate to the adaptive immune responses, we anticipated that sialic acids could also modulate important mechanisms of human DCs. DCs have a relevant role in antigen screening and uptake, migration to lymph nodes and antigen presentation to lymphocytes, ultimately triggering the adaptive immune response. Therefore, our primary hypothesis was that sialic acids may modulate DC functions, such as antigen uptake, maturation, homing to lymph nodes and antigen presentation to T cells. To test this hypothesis, we divided our work in four parts. 1) Surface sialylated glycans expressed during differentiation from human monocytes to DCs (moDCs) were analyzed. Our data showed that α2,3-sialylated O-glycans and α2,6- and α2,3-sialylated N-glycans expression increased during moDC differentiation. Three main sialyltransferases (STs) are committed with this new glycan configuration: ST6Gal- 1 correlates with the increased expression of α2,6-sialylated N-glycans; ST3Gal-1 32 contributes for the α2,3-sialylation of O-glycans, especially T antigens; and ST3Gal-4 may contribute for the increased α2,3-sialylated N-glycans. Upon moDC maturation, ST6Gal-1 and ST3Gal-4 are downregulated and ST3Gal-1 is altered in a stimulus dependent manner. 2) We subsequently analyzed the consequences of the modulation of cell surface sialic acids in DC functions. We observed that removing surface sialic acid by sialidase significantly decreased the capacity of moDCs to micropinocytose and receptormediated endocytose. In contrast, treatment with a sialidase significantly improved the capacity of moDCs to phagocytose Escherichia coli. The improved phagocytosis mechanism required E. coli sialic acids, indicating a mechanism of host–pathogen interaction dependent on sialic acid moieties. Sialidase-treated moDCs have increased expression of MHC and co-stimulatory molecules, suggesting a more mature phenotype. Experiments using mouse bone marrow-derived DCs (BMDCs) from ST3Gal-1-/- and ST6Gal-1-/- strains indicated that endocytosis and maturation are influenced by changes in either α2,3 or α2,6-sialylated glycans. The analysis of α2,6-sialylated, N-glycosylated proteins, strongly suggested the potential involvement of β2 integrins, underlying these mechanisms. 3) The effect of α2,6-sialylation in DC homing to lymph nodes was also analyzed. We observed that BMDCs deficient for ST6Gal-1 have an almost 50% reduction in DC homing, as assayed by in situ inflammation and adoptive transfer studies. A reduction in DC homing was also observed when wild type BMDCs were transferred into ST6Gal-1-/- recipient mice. Further investigations are necessary to identify the molecules involved in this process. 4) Finally, we also analyzed the impact of sialylation on DCs ability to prime T cells. Sialidase-treated moDCs show increased gene expression of IL-12, TNF-α, IL-6 and IL- 10 cytokines, and activation of the transcription factor nuclear factor-κB. Sialidase33 treated DCs induced a higher proliferative response of T cells with concomitant higher expression of interferon-γ, suggesting that the clearance of cell surface sialic acids contributes to the development of a T helper type 1 proinflammatory response. Together, our data strongly support sialic acid’s relevance in DC immune functions. Alterations of cell surface sialic acid content can alter the endocytosis/phagocytosis, maturation, migration/homing and the ability for T cell priming in human DCs. Moreover, sialic acid linkages created by ST6Gal-1 and ST3Gal-1 are functionally relevant. The engineering of cell surface sialylation, mediated by individual sialidases or sialyltransferases is a likely possibility to fine tune DC phagocytosis and immunological potency, with particular significance to DC-based therapies.

Millennium BCP: Optimization of the branches closure process

Nowadays, a significant number of banks in Portugal are facing a bank-branch restructuring problem, and Millennium BCP is not an exception. The closure of branches is a major component of profit maximization through the reduction in operational and personnel costs but also an opportunity to approach the idea of “baking of future” and start thinking on the benefits of the digital era. This dissertation centers on a current high-impact organizational problem addressed by the company and consists in a proposal of optimization to the model that Millennium BCP uses. Even though measures of performance are usually considered the most important elements in evaluating the viability of branches, there is evidence suggesting that other general factors can be important to assess branch potential, such as the influx on branches, business dimensions of a branch and its location, which will be addressed in this project.

Assessing fraud risk of selecção, contratação e manutenção de fornecedores process of Sonae Investimentos

The present Work Project (WP) is the result of Sonae’s concern with fraud risk, seeking to implement a method that formally describes and evaluates it in its various forms. In a context of limited human, capital, time and tools’ resources, the Internal Audit (IA) department of the company developed a framework to raise the awareness of top management and identify which processes of its value chain present a higher level of exposure to fraud, with the purpose of redirecting attention to those and prioritizing the creation of new mechanisms to monitor its KPIs’ dynamics.