Fuelwood collection and consumption: a case study in Lupeta Tanzania

Fuelwood is a major resource in rural areas. Fuelwood collection and consumption habits were monitored in Lupeta, Tanzania through household interviews and fuelwood collection walks. Social dimensions, economic aspects of fuelwood, and alternative fuel sources were also examined. The study found that for all wealth classes, fuelwood is the primary source of fuel used within the village, with the middle and upper classes occasionally supplementing fuelwood with charcoal. Women collect and consume fuelwood for cooking. The majority of women (69%) prefer to use charcoal because fuelwood collection is labor intensive and time consuming. While the use of charcoal would provide more time for other required household activities, local economic constraints inhibit their adoption. The fuel shift from biomass fuels to transition fuels is happening slowly in Lupeta from fuelwood to charcoal. As fuelwood becomes scarcer, improved methods will need to be adopted or the fuel source will change.

A comparison of pixel and object-based land cover classification. A case study of the Asmara region, Eritrea

In this paper we compare the performance of two image classification paradigms (object- and pixel-based) for creating a land cover map of Asmara, the capital of Eritrea and its surrounding areas using a Landsat ETM+ imagery acquired in January 2000. The image classification methods used were maximum likelihood for the pixel-based approach and Bhattacharyya distance for the object-oriented approach available in, respectively, ArcGIS and SPRING software packages. Advantages and limitations of both approaches are presented and discussed. Classifications outputs were assessed using overall accuracy and Kappa indices. Pixel- and object-based classification methods result in an overall accuracy of 78% and 85%, respectively. The Kappa coefficient for pixel- and object-based approaches was 0.74 and 0.82, respectively. Although pixel-based approach is the most commonly used method, assessment and visual interpretation of the results clearly reveal that the object-oriented approach has advantages for this specific case-study.

Anti-Americanism in Europe: Theoretical Mechanisms and Empirical Evidence

One of the most popular explanations for post-9/11 anti-Americanism argues that resentment against America and Americans is mainly a function of the US government’s unpopular actions. The present article challenges this interpretation: first, it argues that neither the vitality of the resentment in times when the United States had no influence in the respective parts of the world nor its recent radical manifestations are accounted for in a political reductionist framework. In fact, specific traditions of anti-Americanism have an influence on the negative attitudes observed today, as a comparison between Britain, France, Germany, and Poland reveals. Second, this article suggests an alternative theoretical approach. Anti-Americanism can be explained by two basic mechanisms: it functions as a strategy to project denied and disliked self-concepts onto an external object, and it offers an interpretation frame for complex social processes that allows to reduce cognitive dissonance. Multivariate analyses based on empirical data collected in the Pew surveys of 2002 and 2007 show the fruitfulness of our theoretical approach.

The Dissociation of Location and Object Working Memory using fMRI and MEG

Visual working memory (VWM) involves maintaining and processing visual information, often for the purpose of making immediate decisions. Neuroimaging experiments of VWM provide evidence in support of a neural system mainly involving a fronto-parietal neuronal network, but the role of specific brain areas is less clear. A proposal that has recently generated considerable debate suggests that a dissociation of object and location VWM occurs within the prefrontal cortex, in dorsal and ventral regions, respectively. However, re-examination of the relevant literature presents a more robust distribution suggestive of a general caudal-rostral dissociation from occipital and parietal structures, caudally, to prefrontal regions, rostrally, corresponding to location and object memory, respectively. The purpose of the present study was to identify a dissociation of location and object VWM across two imaging methods (magnetoencephalography, MEG, and functional magnetic imaging, fMRI). These two techniques provide complimentary results due the high temporal resolution of MEG and the high spatial resolution of fMRI. The use of identical location and object change detection tasks was employed across techniques and reported for the first time. Moreover, this study is the first to use matched stimulus displays across location and object VWM conditions. The results from these two imaging methods provided convergent evidence of a location and object VWM dissociation favoring a general caudal-rostral rather than the more common prefrontal dorsal-ventral view. Moreover, neural activity across techniques was correlated with behavioral performance for the first time and provided convergent results. This novel approach of combining imaging tools to study memory resulted in robust evidence suggesting a novel interpretation of location and object memory. Accordingly, this study presents a novel context within which to explore the neural substrates of WM across imaging techniques and populations.

X-ray image calibration and its application to clinical orthopedics.

X-ray imaging is one of the most commonly used medical imaging modality. Albeit X-ray radiographs provide important clinical information for diagnosis, planning and post-operative follow-up, the challenging interpretation due to its 2D projection characteristics and the unknown magnification factor constrain the full benefit of X-ray imaging. In order to overcome these drawbacks, we proposed here an easy-to-use X-ray calibration object and developed an optimization method to robustly find correspondences between the 3D fiducials of the calibration object and their 2D projections. In this work we present all the details of this outlined concept. Moreover, we demonstrate the potential of using such a method to precisely extract information from calibrated X-ray radiographs for two different orthopedic applications: post-operative acetabular cup implant orientation measurement and 3D vertebral body displacement measurement during preoperative traction tests. In the first application, we have achieved a clinically acceptable accuracy of below 1° for both anteversion and inclination angles, where in the second application an average displacement of 8.06±3.71 mm was measured. The results of both applications indicate the importance of using X-ray calibration in the clinical routine.

Post-Empire Imaginaries? Anglophone Literature, History, and the Demise of Empires

Empires as political entities may be a thing of the past, but as a concept, empire is alive and kicking. From heritage tourism and costume dramas to theories of the imperial idea(l): empire sells. Post-Empire Imaginaries? Anglophone Literature, History, and the Demise of Empires presents innovative scholarship on the lives and legacies of empires in diverse media such as literature, film, advertising, and the visual arts. Though rooted in real space and history, the post-empire and its twin, the post-imperial, emerge as ungraspable ideational constructs. The volume convincingly establishes empire as welcoming resistance and affirmation, introducing post-empire imaginaries as figurations that connect the archives and repertoires of colonial nostalgia, postcolonial critique, post-imperial dreaming.

Effects of ground semen collection on weight bearing on hindquarters, libido, and semen parameters in stallions

Collection of semen on the ground from the standing stallion represents an alternative method to dummy mount semen collection and is of increasing popularity for sport stallions, males suffering from health problems, or in studs without a dummy or suitable mare at disposal. Our aim was to collect and compare spermatological and physiological data associated with traditional and ground semen collection. Twelve of 23 Franches-Montagnes stallions were selected to carry out semen collection on a dummy and while standing in a crossed experimental protocol. Semen quantity and quality parameters, weight bearing on hindquarters, and behavioral and libido data were recorded. Ground versus dummy mount semen collection was accompanied by lower seminal volume (15.9 ± 14.6 vs. 22.0 ± 13.3 mL; P < 0.01) and lower total sperm count (4.913 ± 2.721 × 10(9) vs. 6.544 ± 2.856 × 10(9) sperm; P < 0.001). No significant differences were found concerning sperm motility and viability. Time to ejaculation was longer, and the number of attempts to ejaculation was higher (P = 0.053) in the standing position compared with the mount on the dummy. A higher (P < 0.01) amount of tail flagging was manifested by the stallions during ejaculation on the dummy compared to when standing. There was no difference in weight bearing on hindquarters when comparing dummy collection (51.2 ± 2.5%) and standing collection (48.9 ± 5.5%). Ground semen collection can be considered as a viable option for stallions that cannot mount a dummy or a mare. However, it requires training and may be not easily accepted by all stallions. Owners should be advised that ground semen collection is associated with significantly lower sperm numbers than with dummy mount semen collection.

Radiocarbon dating of modern peat profiles: Pre- and post-bomb C-14 variations in the construction of age-depth models

We present studies of 9 modern (up to 400-yr-old) peat sections from Slovenia, Switzerland, Austria, Italy, and Finland. Precise radiocarbon dating of modern samples is possible due to the large bomb peak of atmospheric 14C concentration in 1963 and the following rapid decline in the 14C level. All the analyzed 14C profiles appeared concordant with the shape of the bomb peak of atmospheric 14C concentration, integrated over some time interval with a length specific to the peat section. In the peat layers covered by the bomb peak, calendar ages of individual peat samples could be determined almost immediately, with an accuracy of 23 yr. In the pre-bomb sections, the calendar ages of individual dated samples are determined in the form of multi-modal probability distributions of about 300 yr wide (about AD 16501950). However, simultaneous use of the post-bomb and pre-bomb 14C dates, and lithological information, enabled the rejection of most modes of probability distributions in the pre-bomb section. In effect, precise age-depth models of the post-bomb sections have been extended back in time, into the wiggly part of the 14C calibration curve.

Low correlation between self-report and medical record documentation of urinary tract infection symptoms.

BACKGROUND Correlations between symptom documentation in medical records and patient self-report (SR) vary depending on the condition studied. Patient symptoms are particularly important in urinary tract infection (UTI) diagnosis, and this correlation for UTI symptoms is currently unknown. METHODS This is a cross-sectional survey study in hospitalized patients with Escherichia coli bacteriuria. Patients were interviewed within 24 hours of diagnosis for the SR of UTI symptoms. We reviewed medical records for UTI symptoms documented by admitting or treating inpatient physicians (IPs), nurses (RNs), and emergency physicians (EPs). The level of agreement between groups was assessed using Cohen κ coefficient. RESULTS Out of 43 patients, 34 (79%) self-reported at least 1 of 6 primary symptoms. The most common self-reported symptoms were urinary frequency (53.5%); retention (41.9%); flank pain, suprapubic pain, and fatigue (37.2% each); and dysuria (30.2%). Correlation between SR and medical record documentation was slight to fair (κ, 0.06-0.4 between SR and IPs and 0.09-0.5 between SR and EDs). Positive agreement was highest for dysuria and frequency. CONCLUSION Correlation between self-reported UTI symptoms and health care providers' documentation was low to fair. Because medical records are a vital source of information for clinicians and researchers and symptom assessment and documentation are vital in distinguishing UTI from asymptomatic bacteriuria, efforts must be made to improve documentation.

The contributions of the hippocampal formation, perirhinal cortex and areas TH/TF to object, spatial and contextual recognition memory in primates

Adult monkeys (Macaca mulatta) with lesions of the hippocampal formation, perirhinal cortex, areas TH/TF, as well as controls were tested on tasks of object, spatial and contextual recognition memory. ^ Using a visual paired-comparison (VPC) task, all experimental groups showed a lack of object recognition relative to controls, although this impairment emerged at 10 sec with perirhinal lesions, 30 sec with areas TH/TF lesions and 60 sec with hippocampal lesions. In contrast, only perirhinal lesions impaired performance on delayed nonmatching-to-sample (DNMS), another task of object recognition memory. All groups were tested on DNMS with distraction (dDNMS) to examine whether the use of active cognitive strategies during the delay period could enable good performance on DNMS in spite of impaired recognition memory (revealed by the VPC task). Distractors affected performance of animals with perirhinal lesions at the 10-sec delay (the only delay in which their DNMS performance was above chance). They did not affect performance of animals with areas TH/TF lesions. Hippocampectomized animals were impaired at the 600-sec delay (the only delay at which prevention of active strategies would likely affect their behavior). ^ While lesions of areas TH/TF impaired spatial location memory and object-in-place memory, hippocampal lesions impaired only object-in-place memory. The pattern of results for perirhinal cortex lesions on the different task conditions indicated that this cortical area is not critical for spatial memory. ^ Finally, all three lesions impaired contextual recognition memory processes. The pattern of impairment appeared to result from the formation of only a global representation of the object and background, and suggests that all three areas are recruited for associating information across sources. ^ These results support the view that (1) the perirhinal cortex maintains storage of information about object and the context in which it is learned for a brief period of time, (2) areas TH/TF maintain information about spatial location and form associations between objects and their spatial relationship (a process that likely requires additional time) and (3) the hippocampal formation mediates associations between objects, their spatial relationship and the general context in which these associations are formed (an integrative function that requires additional time). ^

Goals, plans, and behavior changes: A relevant part of the post-treatment cancer experience

Background. Colorectal cancer (CRC) survivors have to manage treatment side effects, psychosocial issues, and co-morbidities, as well as modify their lifestyles to decrease risk of recurrence and prolong life. Identifying survivors’ goals and key factors that influence their goals will highlight the issues cancer survivors face post-treatment and the resources needed to help them engage in health-promoting behaviors.^ Objectives and methods. This dissertation examines the health-related goals of post-treatment CRC survivors using two studies: (1) a qualitative study to identify and describe the health goals of CRC survivors during the transition from active treatment to post-treatment survivorship and follow-up care; and (2) a cross-sectional survey to identify CRC survivors’ goals, and key factors that influence their goals.^ Results. (1) The 41 qualitative interviews indicated participants’ health-related goals were to be healthy, get back to normal, and not have a cancer recurrence. Most of the CRC survivors reported they maintained healthy behaviors, made healthy behavior changes, or had goals to change their behavior. Respondents were empowered to improve their health by maintaining follow-up care and regular health screenings, and many were managing treatment side effects in an effort to improve functional abilities. (2) The cross-sectional study found that CRC survivors’ most prevalent goals were related to healthy behaviors (i.e., eat a healthy diet and engage in physical activity), and cancer care or disease management (i.e., keep up with health screenings and monitor symptoms). Goals that survivors identified as important were similar to goals they perceived were important to their providers (i.e., goals related to cancer care, disease management). Certain goals were statistically associated with age, barriers to achieving goals, social support and health-related quality of life.^ Conclusions. CRC survivors have health-promoting goals post-treatment and are interested in making health behavior changes. Goals ranged from cancer care/surveillance and disease management to healthy lifestyle modifications. Patients may need help resolving or managing treatment side effects or co-morbidities prior to implementing health promoting behaviors. Healthcare providers’ recommendations may be a powerful resource to encourage survivors to engage in health-promoting behaviors. Self-management and goal setting support could be an appropriate strategy to assist patients with achieving their post-treatment health goals.^

A method for Kinematic Calibration of a Parallel Robot by using one camera in hand and a spherical object

The main purpose of robot calibration is the correction of the possible errors in the robot parameters. This paper presents a method for a kinematic calibration of a parallel robot that is equipped with one camera in hand. In order to preserve the mechanical configuration of the robot, the camera is utilized to acquire incremental positions of the end effector from a spherical object that is fixed in the word reference frame. The positions of the end effector are related to incremental positions of resolvers of the motors of the robot, and a kinematic model of the robot is used to find a new group of parameters which minimizes errors in the kinematic equations. Additionally, properties of the spherical object and intrinsic camera parameters are utilized to model the projection of the object in the image and improving spatial measurements. Finally, the robotic system is designed to carry out tracking tasks and the calibration of the robot is validated by means of integrating the errors of the visual controller.

On-Chip Thermal Monitoring: Design, Placement and Interconnection of Temperature Sensors

La temperatura es una preocupación que juega un papel protagonista en el diseño de circuitos integrados modernos. El importante aumento de las densidades de potencia que conllevan las últimas generaciones tecnológicas ha producido la aparición de gradientes térmicos y puntos calientes durante el funcionamiento normal de los chips. La temperatura tiene un impacto negativo en varios parámetros del circuito integrado como el retardo de las puertas, los gastos de disipación de calor, la fiabilidad, el consumo de energía, etc. Con el fin de luchar contra estos efectos nocivos, la técnicas de gestión dinámica de la temperatura (DTM) adaptan el comportamiento del chip en función en la información que proporciona un sistema de monitorización que mide en tiempo de ejecución la información térmica de la superficie del dado. El campo de la monitorización de la temperatura en el chip ha llamado la atención de la comunidad científica en los últimos años y es el objeto de estudio de esta tesis. Esta tesis aborda la temática de control de la temperatura en el chip desde diferentes perspectivas y niveles, ofreciendo soluciones a algunos de los temas más importantes. Los niveles físico y circuital se cubren con el diseño y la caracterización de dos nuevos sensores de temperatura especialmente diseñados para los propósitos de las técnicas DTM. El primer sensor está basado en un mecanismo que obtiene un pulso de anchura variable dependiente de la relación de las corrientes de fuga con la temperatura. De manera resumida, se carga un nodo del circuito y posteriormente se deja flotando de tal manera que se descarga a través de las corrientes de fugas de un transistor; el tiempo de descarga del nodo es la anchura del pulso. Dado que la anchura del pulso muestra una dependencia exponencial con la temperatura, la conversión a una palabra digital se realiza por medio de un contador logarítmico que realiza tanto la conversión tiempo a digital como la linealización de la salida. La estructura resultante de esta combinación de elementos se implementa en una tecnología de 0,35 _m. El sensor ocupa un área muy reducida, 10.250 nm2, y consume muy poca energía, 1.05-65.5nW a 5 muestras/s, estas cifras superaron todos los trabajos previos en el momento en que se publicó por primera vez y en el momento de la publicación de esta tesis, superan a todas las implementaciones anteriores fabricadas en el mismo nodo tecnológico. En cuanto a la precisión, el sensor ofrece una buena linealidad, incluso sin calibrar; se obtiene un error 3_ de 1,97oC, adecuado para tratar con las aplicaciones de DTM. Como se ha explicado, el sensor es completamente compatible con los procesos de fabricación CMOS, este hecho, junto con sus valores reducidos de área y consumo, lo hacen especialmente adecuado para la integración en un sistema de monitorización de DTM con un conjunto de monitores empotrados distribuidos a través del chip. Las crecientes incertidumbres de proceso asociadas a los últimos nodos tecnológicos comprometen las características de linealidad de nuestra primera propuesta de sensor. Con el objetivo de superar estos problemas, proponemos una nueva técnica para obtener la temperatura. La nueva técnica también está basada en las dependencias térmicas de las corrientes de fuga que se utilizan para descargar un nodo flotante. La novedad es que ahora la medida viene dada por el cociente de dos medidas diferentes, en una de las cuales se altera una característica del transistor de descarga |la tensión de puerta. Este cociente resulta ser muy robusto frente a variaciones de proceso y, además, la linealidad obtenida cumple ampliamente los requisitos impuestos por las políticas DTM |error 3_ de 1,17oC considerando variaciones del proceso y calibrando en dos puntos. La implementación de la parte sensora de esta nueva técnica implica varias consideraciones de diseño, tales como la generación de una referencia de tensión independiente de variaciones de proceso, que se analizan en profundidad en la tesis. Para la conversión tiempo-a-digital, se emplea la misma estructura de digitalización que en el primer sensor. Para la implementación física de la parte de digitalización, se ha construido una biblioteca de células estándar completamente nueva orientada a la reducción de área y consumo. El sensor resultante de la unión de todos los bloques se caracteriza por una energía por muestra ultra baja (48-640 pJ) y un área diminuta de 0,0016 mm2, esta cifra mejora todos los trabajos previos. Para probar esta afirmación, se realiza una comparación exhaustiva con más de 40 propuestas de sensores en la literatura científica. Subiendo el nivel de abstracción al sistema, la tercera contribución se centra en el modelado de un sistema de monitorización que consiste de un conjunto de sensores distribuidos por la superficie del chip. Todos los trabajos anteriores de la literatura tienen como objetivo maximizar la precisión del sistema con el mínimo número de monitores. Como novedad, en nuestra propuesta se introducen nuevos parámetros de calidad aparte del número de sensores, también se considera el consumo de energía, la frecuencia de muestreo, los costes de interconexión y la posibilidad de elegir diferentes tipos de monitores. El modelo se introduce en un algoritmo de recocido simulado que recibe la información térmica de un sistema, sus propiedades físicas, limitaciones de área, potencia e interconexión y una colección de tipos de monitor; el algoritmo proporciona el tipo seleccionado de monitor, el número de monitores, su posición y la velocidad de muestreo _optima. Para probar la validez del algoritmo, se presentan varios casos de estudio para el procesador Alpha 21364 considerando distintas restricciones. En comparación con otros trabajos previos en la literatura, el modelo que aquí se presenta es el más completo. Finalmente, la última contribución se dirige al nivel de red, partiendo de un conjunto de monitores de temperatura de posiciones conocidas, nos concentramos en resolver el problema de la conexión de los sensores de una forma eficiente en área y consumo. Nuestra primera propuesta en este campo es la introducción de un nuevo nivel en la jerarquía de interconexión, el nivel de trillado (o threshing en inglés), entre los monitores y los buses tradicionales de periféricos. En este nuevo nivel se aplica selectividad de datos para reducir la cantidad de información que se envía al controlador central. La idea detrás de este nuevo nivel es que en este tipo de redes la mayoría de los datos es inútil, porque desde el punto de vista del controlador sólo una pequeña cantidad de datos |normalmente sólo los valores extremos| es de interés. Para cubrir el nuevo nivel, proponemos una red de monitorización mono-conexión que se basa en un esquema de señalización en el dominio de tiempo. Este esquema reduce significativamente tanto la actividad de conmutación sobre la conexión como el consumo de energía de la red. Otra ventaja de este esquema es que los datos de los monitores llegan directamente ordenados al controlador. Si este tipo de señalización se aplica a sensores que realizan conversión tiempo-a-digital, se puede obtener compartición de recursos de digitalización tanto en tiempo como en espacio, lo que supone un importante ahorro de área y consumo. Finalmente, se presentan dos prototipos de sistemas de monitorización completos que de manera significativa superan la características de trabajos anteriores en términos de área y, especialmente, consumo de energía. Abstract Temperature is a first class design concern in modern integrated circuits. The important increase in power densities associated to recent technology evolutions has lead to the apparition of thermal gradients and hot spots during run time operation. Temperature impacts several circuit parameters such as speed, cooling budgets, reliability, power consumption, etc. In order to fight against these negative effects, dynamic thermal management (DTM) techniques adapt the behavior of the chip relying on the information of a monitoring system that provides run-time thermal information of the die surface. The field of on-chip temperature monitoring has drawn the attention of the scientific community in the recent years and is the object of study of this thesis. This thesis approaches the matter of on-chip temperature monitoring from different perspectives and levels, providing solutions to some of the most important issues. The physical and circuital levels are covered with the design and characterization of two novel temperature sensors specially tailored for DTM purposes. The first sensor is based upon a mechanism that obtains a pulse with a varying width based on the variations of the leakage currents on the temperature. In a nutshell, a circuit node is charged and subsequently left floating so that it discharges away through the subthreshold currents of a transistor; the time the node takes to discharge is the width of the pulse. Since the width of the pulse displays an exponential dependence on the temperature, the conversion into a digital word is realized by means of a logarithmic counter that performs both the timeto- digital conversion and the linearization of the output. The structure resulting from this combination of elements is implemented in a 0.35_m technology and is characterized by very reduced area, 10250 nm2, and power consumption, 1.05-65.5 nW at 5 samples/s, these figures outperformed all previous works by the time it was first published and still, by the time of the publication of this thesis, they outnumber all previous implementations in the same technology node. Concerning the accuracy, the sensor exhibits good linearity, even without calibration it displays a 3_ error of 1.97oC, appropriate to deal with DTM applications. As explained, the sensor is completely compatible with standard CMOS processes, this fact, along with its tiny area and power overhead, makes it specially suitable for the integration in a DTM monitoring system with a collection of on-chip monitors distributed across the chip. The exacerbated process fluctuations carried along with recent technology nodes jeop-ardize the linearity characteristics of the first sensor. In order to overcome these problems, a new temperature inferring technique is proposed. In this case, we also rely on the thermal dependencies of leakage currents that are used to discharge a floating node, but now, the result comes from the ratio of two different measures, in one of which we alter a characteristic of the discharging transistor |the gate voltage. This ratio proves to be very robust against process variations and displays a more than suficient linearity on the temperature |1.17oC 3_ error considering process variations and performing two-point calibration. The implementation of the sensing part based on this new technique implies several issues, such as the generation of process variations independent voltage reference, that are analyzed in depth in the thesis. In order to perform the time-to-digital conversion, we employ the same digitization structure the former sensor used. A completely new standard cell library targeting low area and power overhead is built from scratch to implement the digitization part. Putting all the pieces together, we achieve a complete sensor system that is characterized by ultra low energy per conversion of 48-640pJ and area of 0.0016mm2, this figure outperforms all previous works. To prove this statement, we perform a thorough comparison with over 40 works from the scientific literature. Moving up to the system level, the third contribution is centered on the modeling of a monitoring system consisting of set of thermal sensors distributed across the chip. All previous works from the literature target maximizing the accuracy of the system with the minimum number of monitors. In contrast, we introduce new metrics of quality apart form just the number of sensors; we consider the power consumption, the sampling frequency, the possibility to consider different types of monitors and the interconnection costs. The model is introduced in a simulated annealing algorithm that receives the thermal information of a system, its physical properties, area, power and interconnection constraints and a collection of monitor types; the algorithm yields the selected type of monitor, the number of monitors, their position and the optimum sampling rate. We test the algorithm with the Alpha 21364 processor under several constraint configurations to prove its validity. When compared to other previous works in the literature, the modeling presented here is the most complete. Finally, the last contribution targets the networking level, given an allocated set of temperature monitors, we focused on solving the problem of connecting them in an efficient way from the area and power perspectives. Our first proposal in this area is the introduction of a new interconnection hierarchy level, the threshing level, in between the monitors and the traditional peripheral buses that applies data selectivity to reduce the amount of information that is sent to the central controller. The idea behind this new level is that in this kind of networks most data are useless because from the controller viewpoint just a small amount of data |normally extreme values| is of interest. To cover the new interconnection level, we propose a single-wire monitoring network based on a time-domain signaling scheme that significantly reduces both the switching activity over the wire and the power consumption of the network. This scheme codes the information in the time domain and allows a straightforward obtention of an ordered list of values from the maximum to the minimum. If the scheme is applied to monitors that employ TDC, digitization resource sharing is achieved, producing an important saving in area and power consumption. Two prototypes of complete monitoring systems are presented, they significantly overcome previous works in terms of area and, specially, power consumption.

Feo, inútil, inestable: pensamiento crítico contemporáneo y procesos proyectivos en arquitectura = Ugly, useless, unstable: contemporary critical thought and projective processes in architecture

La presente tesis doctoral persigue dos objetivos simultáneos: Determinar el alcance de los criterios clásicos para la evaluación de arquitectura y poner en crisis la prevalencia de esos mismos criterios dentro del marco crítico y productivo actual. En concreto, esta tesis se interroga sobre la posible contribución de determinadas corrientes del pensamiento post-estructuralista y neo-materialista a las tareas de expansión y transformación de los criterios clásicos antes mencionados. Asimismo, se plantea la oportunidad de formalizar estas incorporaciones conceptuales como metodologías para el proyectar arquitectónico. La tesis emplea un análisis pormenorizado de las cualidades implícitas en la triada Firmitas, Utilitas, Venustas elaborada por Vitruvio como vehículo para calibrar la influencia de los paradigmas de pensamiento clásico en nuestras posiciones críticas contemporáneas. Como reacción al carácter dominante de dichos paradigmas, y con la ayuda de una compilación selectiva de ejemplos procedentes de los campos artístico y arquitectónico, la presente tesis procede a examinar y clasificar diversas estrategias arquitectónicas basadas en la no conformidad con los criterios clásicos de evaluación de la disciplina. A la hora de realizar esta tarea, y con el objetivo de superar el dualismo trascendental que caracteriza la gran mayoría de dichos criterios clásicos, se propone un modelo analítico y multidimensional que formula las instancias arquitectónicas como posibles posiciones dentro de un extenso continuo combinatorio de cualidades formales, estructurales y organizativas. Este modelo conceptual permite replantear el aparente antagonismo entre los principios de Vitruvio y sus opuestos, estableciendo en su lugar un dominio operativo continuo de producción arquitectónica. Esta operación abre una ventana de oportunidad para expandir los límites del marco crítico actual más allá de las fronteras establecidas por nuestra herencia clásica. En consecuencia con esta voluntad, la presente tesis pretende habilitar un ámbito para el análisis crítico de las estrategias que caracterizan ciertas corrientes del proyectar contemporáneo, pero también contribuir a informar nuevas aproximaciones metodológicas al proceso de proyecto, desplazando progresivamente su foco desde lo descriptivo hacia lo proyectivo. ABSTRACT This doctoral thesis attempts to simultaneously determine the scope of the classical criteria for the evaluation of architecture and challenge their prevalence within the current framework of architectural production and criticism. It examines how specific strands of post-structuralism and neo-materialism may contribute to both the expansion and the transformation of these criteria and, in doing so, sets itself the goal of mobilising these conceptual incorporations as explicit design methodologies. A detailed analysis of the formal, structural and organisational qualities implicit in Vitruvius’ triad Firmitas, Utilitas, Venustas is used as a starting point to determine the influence of classical paradigms in our current critical positions. As a reaction to this critical pervasiveness, and supported by a curated collection of artistic and architectural works, diverse approaches to non-compliance with the classical criteria of assessment are examined and classified. In order to facilitate this endeavour -and to overcome the transcendental dualism of most classical critical approaches in architecture- this thesis puts forward an analytical, multidimensional model that formulates architectural instances as possible positions within a larger combinatory continuum of formal, structural and organisational qualities. Using this conceptual model, the apparent antagonism between Vitruvius’ principles and its non-compliant opposites is reframed as a continuous operative domain of architectural production, which in turn opens up a window of opportunity to expand the limits of our critical framework beyond the boundaries of classical paradigms. In doing so, this thesis attempts not only to foster a better understanding of some of the strategic approaches that characterise contemporary systems of architectural production, but also to inform future methodological approaches to architectural design, hence situating itself beyond the domain of the descriptive and moving towards the projective.