Isocyanates and Amines – Sampling and Analytical Procedures

This thesis covers sampling and analytical procedures for isocyanates (R-NCO) and amines (R-NH2), two kinds of chemicals frequently used in association with the polymeric material polyurethane (PUR). Exposure to isocyanates may result in respiratory disorders and dermal sensitisation, and they are one of the main causes of occupational asthma. Several of the aromatic diamines associated with PUR production are classified as suspected carcinogens. Hence, the presence of these chemicals in different exposure situations must be monitored. In the context of determining isocyanates in air, the methodologies included derivatisation with the reagent di-n-butylamine (DBA) upon collection and subsequent determination using liquid chromatography (LC) and mass spectrometric detection (MS). A user-friendly solvent-free sampler for collection of airborne isocyanates was developed as an alternative to a more cumbersome impinger-filter sampling technique. The combination of the DBA reagent together with MS detection techniques revealed several new exposure situations for isocyanates, such as isocyanic acid during thermal degradation of PUR and urea-based resins. Further, a method for characterising isocyanates in technical products used in the production of PUR was developed. This enabled determination of isocyanates in air for which pure analytical standards are missing. Tandem MS (MS/MS) determination of isocyanates in air below 10-6 of the threshold limit values was achieved. As for the determination of amines, the analytical methods included derivatisation into pentafluoropropionic amide or ethyl carbamate ester derivatives and subsequent MS analysis. Several amines in biological fluids, as markers of exposure for either the amines themselves or the corresponding isocyanates, were determined by LC-MS/MS at amol level. In aqueous extraction solutions of flexible PUR foam products, toluene diamine and related compounds were found. In conclusion, this thesis demonstrates the usefulness of well characterised analytical procedures and techniques for determination of hazardous compounds. Without reliable and robust methodologies there is a risk that exposure levels will be underestimated or, even worse, that relevant compounds will be completely missed.

Differenziamento macrofagico: gli effetti dei polimeri sintetici

Research for new biocompatible and easily implantable materials continuously proposes new molecules and new substances with biological, chemical and physical characteristics, that are more and more adapted to aesthetic and reconstructive surgery and to the development of biomedical devices such as cardiovascular prostheses. Two classes of polymeric biomaterials seem to meet better these requirements: “hydrogels” , which includes polyalkylimide (PAI) and polyvinylalcohol (PVA) and “elastomers”, which includes polyurethanes (PUs). The first ones in the last decade have had a great application for soft tissue augmentation, due to their similarity to this tissue for their high water content, elasticity and oxygen permeability (Dini et al., 2005). The second ones, on the contrary, are widely used in cardiovascular applications (catheters, vascular grafts, ventricular assist devices, total artificial hearts) due to their good mechanical properties and hemocompatibility (Zdrahala R.J. and Zdrahala I.J., 1999). In the biocompatibility evaluation of these synthetic polymers, that is important for its potential use in clinical applications, a fundamental aspect is the knowledge of the polymers cytotoxicity and the effect of their interaction with cells, in particular with the cell populations involved in the inflammatory responses, i.e. monocyte/macrophages. In consideration of what above said, the aim of this study is the comprehension of the in vitro effect of PAI, PVA and PU on three cell lines that represent three different stages of macrophagic differentiation: U937 pro-monocytes, THP-1 monocytes and RAW 264.7 macrophages. Cytotoxicity was evaluated by measuring the rate of viability with MTT, Neutral Red and morphological analysis at light microscope in time-course dependent experiments. The influence of these polymers on monocyte/macrophage activation in terms of cells adhesion, monocyte differentiation in macrophages, antigens distribution, aspecific phagocytosis, fluid-phase endocitosis, pro-inflammatory cytokine (TNF-α, IL-1β, IL-6) and nitric oxide (NO) release was evaluated. In conclusion, our studies have indicated that the three different polymeric biomaterials are highly biocompatible, since they scarcely affected viability of U937, THP-1 and RAW 264.7 cells. Moreover, we have found that even though hydrogels and polyurethane influences monocyte/macrophage differentiation (depending on the particular type of cell and polymer), they are immunocompatible since they not induced significantly high cytokine release. For these reasons their clinical applications are strongly encouraged.

Idrogenazione selettiva del 5-idrossimetilfurfurale in fase omogenea: studio dell'attività catalitica del complesso di Shvo

Il presente lavoro di tesi è frutto di una collaborazione fra il Dipartimento di Chimica Fisica ed Inorganica (gruppo del Prof. Valerio Zanotti – Mattia Vaccari, Dr. Rita Mazzoni) ed il Dipartimento di Chimica Industriale e dei Materiali (gruppo del Prof. Angelo Vaccari – Dr. Thomas Pasini, Dr. Stefania Albonetti, Prof. Fabrizio Cavani) e si inserisce il un progetto volto a valutare l’attività e la selettività del catalizzatore di idrogenazione di Shvo 1, verso l’idrogenazione selettiva del doppio legame polare del 5-idrossimetilfurfurale (HMF) in fase omogenea. L’HMF è un composto di natura organica facilmente ottenibile dalle biomasse, il quale può essere impiegato come building block per ottenere prodotti ad alto valore aggiunto per la chimica fine o additivi per biocarburanti aventi un elevato potere calorifico. In particolare la nostra attenzione si è rivolta alla produzione del 2,5-diidrossimetilfurano (BHMF), un importante building block per la produzione di polimeri e schiume poliuretaniche. Il lavoro di tesi da me svolto ha riguardato la messa a punto di una nuova metodologia sintetica per la preparazione del catalizzatore di Shvo e lo studio della sua attività catalitica nella riduzione di HMF a BHMF. Il comportamento del catalizzatore è stato monitorato studiando la resa in BHMF in funzione di tutti i parametri di reazione: temperatura, pressione di H2, solvente, rapporto molare substrato/catalizzatore, concentrazione, tempo. Successivamente è stata valutata la possibilità di riciclare il catalizzatore recuperando il prodotto di estrazione con acqua, per precipitazione o eseguendo la reazione in miscela bifasica (toluene/H2O). The present work is a collaboration between the Department of Physics and Inorganic Chemistry (group of Prof. Valerio Zanotti - Mattia Vaccari, Dr. Rita Mazzoni) and the Department of Industrial Chemistry and Materials (Group of Prof. Angelo Vaccari - Dr. Thomas Pasini, Dr. Stefania Albonetti, Prof. Fabrizio Cavani), and it’s a project devoted to evaluate the activity and selectivity of the Shvo catalyst, in the selective hydrogenation of polar double bond of 5 -hydroxymethylfurfural (HMF) in homogeneous phase. The HMF is an organic compound easily obtained from biomass, which can be used as a building block for fine chemicals abd polymer production or additives for biofuels with a high calorific value. In particular, our attention turned to the production of 2.5-bishydroxymethylfuran (BHMF), an important building block for the production of polymers and polyurethane foams. This thesis has involved the development of a new synthetic methodology for the preparation of Shvo’s catalyst and the study of its catalytic activity in the reduction of HMF to BHMF. The behavior of the catalyst was monitored by studying the yield in BHMF as a function of all the reaction parameters: temperature, pressure of H2, solvent, substrate to catalyst molar ratio, concentration, time. Subsequently it was evaluated the possibility of recycling the catalyst recovering the product of extraction with water, by precipitation or performing the reaction in biphasic mixture (toluene/H2O).

Studio di catalisi termoattivate per compositi poliuretanici

One of the key processing parameters in thermoset composites manufacturing is to have an optimum balance between open time and cure time. Long open times followed with a fast cure profile (also referred as snap cure or “hockey stick” shaped profiles) are required on applications like Pultrusion, Filament Winding, Resin Transfer Molding (RTM) and Infusion. In this work, several factors affecting the reactivity of a base line polyurethane formulation were studied. The addition of different components such as internal mold release agents, cross-linker, polyols having different molecular structure and isocyanates having different functionality were studied. A literature search was conducted to identify the main catalyst packages existing in the market. The reactivity of catalyst based on tertiary amines, orgamometallic salts, and co-catalyst of amine-organometallic complexes was characterized. Addition of quelants agents such as thioglycerol and acetyl acetone to delay the catalyst activity were also considered. As a consequence of this work a vast reactivity map was generated. This should guide the formulation designer in future product generations for the further development of the mentioned applications. Recommendations on measurements systems and further areas of exploration are also given.

Nicht-wässrige Emulsionspolymerisationen

Die vorliegende Arbeit beschäftigt sich mit der Darstellung von Latexpartikeln in nicht-wässrigen Emulsionssystemen. Hintergrund der Untersuchungen war die Frage, ob es durch die Anwendung von nicht-wässrigen Emulsionen ermöglicht werden kann, sowohl wassersensitive Monomere als auch feuchtigkeitsempfindliche Polymerisationen zur Darstellung von Polymer-Latexpartikeln und deren Primärdispersionen einzusetzen. Das Basiskonzept der Arbeit bestand darin, nicht-wässrige Emulsionen auf der Basis zweier nicht mischbarer organischer Lösungsmittel unterschiedlicher Polarität auszubilden und anschließend die dispergierte Phase der Emulsion zur Synthese der Latexpartikel auszunutzen. Hierzu wurden verschiedene nicht-wässrige Emulsionssysteme erarbeitet, welche als dispergierte Phase ein polares und als kontinuierliche Phase ein unpolares Lösungsmittel enthielten. Auf Basis dieser Ergebnisse wurde in den nachfolgenden Untersuchungen zunächst die Anwendbarkeit solcher Emulsionen zur Darstellung verschiedener Acrylat- und Methacrylatpolymerdispersionen mittels radikalischer Polymerisation studiert. Um zu zeigen, dass die hier entwickelten nicht-wässrigen Emulsionen auch zur Durchführung von Stufenwachstumsreaktionen geeignet sind, wurden ebenfalls Polyester-, Polyamid- und Polyurethan-Latexpartikel dargestellt. Die Molekulargewichte der erhaltenen Polymere lagen bei bis zu 40 000 g/mol, im Vergleich zu wässrigen Emulsions- und Miniemulsions¬polymerisationssystemen sind diese um den Faktor fünf bis 30 höher. Es kann davon ausgegangen werden, dass hauptsächlich zwei Faktoren für die hohen Molekulargewichte verantwortlich sind: Zum einen die wasserfreien Bedingungen, welche die Hydrolyse der reaktiven Gruppen verhindern, und zum anderen die teilweise erfüllten Schotten-Baumann-Bedingungen, welche an der Grenzfläche zwischen dispergierter und kontinuierlicher Phase eine durch Diffusion kontrollierte ausgeglichene Stöchiometrie der Reaktionspartner gewährleisten. Somit ist es erstmals möglich, hochmolekulare Polyester, -amide und -urethane in nur einem Syntheseschritt als Primär¬dispersion darzustellen. Die Variabilität der nicht-wässrigen Emulsionen wurde zudem in weiteren Beispielen durch die Synthese von verschiedenen elektrisch leitfähigen Latices, wie z.B. Polyacetylen-Latexpartikeln, aufgezeigt. In dieser Arbeit konnte gezeigt werden, dass die entwickelten nicht-wässrigen Emulsionen eine äußerst breite Anwendbarkeit zur Darstellung von Polymer-Latexpartikeln aufweisen. Durch die wasserfreien Bedingungen erlauben die beschriebenen Emulsionsprozesse, Latexpartikel und entsprechende nicht-wässrige Dispersionen nicht nur traditionell radikalisch, sondern auch mittels weiterer Polymerisationsmechanismen (katalytisch, oxidativ oder mittels Polykondensation bzw. -addition) darzustellen.

Synthese organisch-anorganischer Hybridmaterialien in Mehrkomponenten-Lösungsmittelsystemen

Die Funktionalisierung anorganischer Nanopartikel stellt einen Schlüsselschritt in der Herstellung von Nanokompositen dar. Nanokomposite erzielen ein wachsendes Interesse im Bereich der Polymer- und der Materialwissenschaften, da die Kombination mehrerer Materialien mit unterschiedlichen Eigenschaften, wie etwa die Kombination anorganischer Nanopartikel mit Polymeren, große Synergieeffekte erhoffen lässt.rnrnDer Einbau anorganischer Nanopartikel in polymere Matrixmaterialien zur Verbesserung oder Einführung mechanischer, optischer oder magnetischer Eigenschaften von Polymeren bedarf allerdings der Modifizierung der Oberfläche des anorganischen Materials, um die für die positiven Synergieeffekte essentielle Kompatibilität zwischen Füllstoff und Matrix zu erreichen.rnrnEine Vielzahl anorganischer Partikel ist bereits als wässrige Dispersion erhältlich (SiO2, Al2O3, CeO2, ZrO2, ...). Mehrkomponenten- Lösungsmittelsysteme ermöglichen den Transfer dieser Partikel in eine unpolare Umgebung und gleichzeitig deren Funktionalisierung mit amphiphilen Copolymeren. Aufgrund der reversiblen Schaltbarkeit dieser Lösungsmittelsysteme zwischen einem einphasigen und zweiphasigen Zustand werden die zu Beginn in zwei nichtmischbaren Phasen vorliegenden Reaktionspartner durch Übergang in einen einphasigen Zustand unter homogenen Bedingungen in Kontakt gebracht und durch eine erneute Phasentrennung isoliert.rnEin weiterer Vorteil dieser Lösungsmittelsysteme ist deren Tolerierung funktioneller Gruppen in den verwendeten amphiphilen Copolymeren, welche nicht in Wechselwirkung mit der Partikeloberfläche stehen. Beispielsweise können Amine in den amphiphilen Copolymeren für die Wechselwirkung der funktionalisierten Partikel mit einer Polyurethanmatrix dienen, Alkine können mittels einer 1,3-dipolaren Cycloaddition umgesetzt werden oder aber perfluorierten Seitenketten in den Seitenketten der amphiphilen Copolymere die Kompatibilisierung der funktionalisierten Partikel mit einem perfluorierten Polymer gewährleisten.

Abbaubare Polymere und Kupfer-katalysierte Reaktionen in Miniemulsion zum Aufbau funktioneller Nanopartikel und –kapseln

Die vorliegende Dissertation zeigte die Anwendung von funktionellen Monomeren um Nanokapseln und Nanopartikeln, die mit der Miniemulsionstechnik hergestellt wurden, eine Vielzahl von Eigenschaften zu verleihen. Hierbei wurden zum einen die Vorteile der Miniemulsionstechnik genutzt, die vor allem eine sehr große Bandbreite von Methoden und Monomeren erlaubt. Zum anderen wurden durch das Design der Monomere neue Polymere mit speziellen Eigenschaften synthetisiert.rnEs wurden abbaubare Polymere synthetisiert, die für Freisetzungs- und Sensorapplikationen verwendet werden konnten. Hierzu wurde durch die Verwendung von Dioxepanen die einfache Synthese von abbaubaren Polyester- und Copolyester-Nanopartikeln ermöglicht. Es konnte weiterhin gezeigt werden, das diese Partikel einen hydrophoben Wirkstoff, Paclitaxel, in eine Zelle schleusen können und ihn dort freisetzen.rnDurch die Verwendung tertiärer Diole konnten funktionale Polyurethane hergestellt werden, die eine einzigartige Abbaubarkeit durch die Zugabe von Säuren oder durch thermische Behandlung aufwiesen. Diese bisher in der Literatur unbekannte Klasse von Polyurethanen kann als Sensormaterial und für Opferschichten verwendet werden. rnWeiterhin wurde die Strukturbildung von Hybridblockcopolymeren in Nanopartikeln und Nanokapseln untersucht. Es wurden hierzu neuartige, aminfunktionalisierte Azoinitiatoren hergestellt, die zu Polyurethan-Makroazoinitiatoren weiterreagiert wurden. rnim Folgenden wurden mittels kontrollierten radikalische Polymerisationstechniken Basis der tertiären Carbamate Polyurethan-ATRP-Makroinitiatoren hergestellt. Diese wurden sowohl in Lösung wie auch in inverser Miniemulsion dazu verwendet, Blockterpolymere herzustellen. Es wurden durch unterschiedliche Miniemulsionstechniken Nanopartikel und Nanokapseln hergestellt, die allesamt eine Mikrophasenseparation zeigten, wodurch Kern-Schale-Strukturen erhalten wurden. rnDie Huisgen-Zykloaddition von Aziden und terminalen Alkinen wurde dazu ausgenutzt, um durch die Verwendung von Dialkinen und Diaziden an der Grenzfläche von Topfen in inverser Miniemulsion eine Polymerisation durchzuführen. Es wurden sehr hohe Polymerisationsgrade bei sehr milden Temperaturen durch den Einsatz eines grenzflächenaktiven Kupferkatalysators erreicht. Die hergestellten Nanokapseln wurden Des Weiteren konnte durch die Herstellung eines neuartigen Dipropiolatesters ein System beschrieben werden, das eine Polymerisation mit Diaziden an der Grenzfläche bei Raumtemperatur eingeht. rnWeiterhin wurde die kupferkatalysierte 1,3-Dipolare Zykloaddition von terminalen Alkinen und Aziden (Clickreaktion) dazu ausgenutzt, um Nanokapseln an der Oberfläche zu funktionalisieren. Hierzu wurden Azid- und Alkin funktionalisierte Monomere verwendet, die in inverser Miniemulsion an der Grenzfläche polymerisiert wurden. Die kovalente Anbindung und der Umsatz der von Alkinfunktionen an der Oberfläche wurde mittels eines fluorogenen Click-Farbstoffes (9-Azidomethylen-Anthracen) untersucht und durch Messung der Fluoreszenzverstärkung konnte eine Aussage über die umgesetzten Alkinfunktionen getroffen werden. rnAzidfunktionen konnten mit einem neuartigen kupferfreien System adressiert werden. Hierbei wurde durch den Umsatz mit Acetylensäure eine sehr einfache Funktionalisierung der Polyurethan-Nanokapseloberfläche mit Carboxylgruppen bei Raumtemperatur ohne den Einsatz von Katalysatoren oder einer inerten Atmosphäre erreicht. Die erfolgreiche Anbindung konnte mit Partikelladungsmessungen sowie Bestimmung des Zetapotentials verifiziert werden.rn

Herstellung hydrophiler Polyurethanpartikel und anisotroper Polymerpartikel

Hydrophile Polyurethanpartikel wurden mittels in inversen Miniemulsionen durchgeführten Polyadditionsreaktionen hergestellt. Wie durch FT-IR-Spektroskopie gezeigt wurde, konnte durch die Abwesenheit von Wasser in dem verwendeten System die Entstehung von Harnstoffbindungen vermieden werden. Das Molekulargewicht der erhaltenen Polyurethane konnte durch verschiedene Parameter, wie zum Beispiel die Hydrophobizität der kontinuierlichen Phase oder die Zugabe von DMSO zur dispersen Phase, beeinflusst werden. Die höchsten Molekulargewichte (Mn von bis zu 19000 g•mol-1) wurden mit Isopar M als kontinuierlicher Phase erhalten. Der zweite Teil der Arbeit beschäftigt sich mit der Herstellung anisotroper Polystyrolpartikel über eine Film-Dehnungs-Methode. Polystyrol/Polyvinylalkohol-Filme wurden oberhalb der Glasübergangstemperatur von Polystyrol und Polyvinylalkohol (Matrix) uniaxial oder biaxial gedehnt, wodurch ellipsenförmige oder scheibenförmige Partikel entstanden. Es zeigte sich, dass die Redispergierbarkeit der verstreckten Partikel in Wasser stark von deren Oberflächenfunktionalisierung abhängig war. Die beste Redispergierbarkeit (46%) wurde für Sulfonat-funktionalisierte Partikel erhalten. Als eine alternative Methode zur Herstellung anisotroper Polymerpartikel wurde im letzten Teil der vorliegenden Arbeit Elektrospinnen eingesetzt. Es konnte gezeigt werden, dass es prinzipiell möglich ist, ellipsenförmige PS-Partikel zu erhalten, deren Aspektverhältnis durch die Höhe der angelegten Spannung und den Abstand zwischen Spitze und Kollektor beeinflusst wurde. Neben PS-Partikeln konnten auch PMMA-Kapseln über Elektrospinnen verstreckt werden. Mittels der Film-Dehnungs-Methode konnte jedoch eine größere Vielfalt an Aspektverhältnissen hergestellt werden. Ein weiterer Nachteil gegenüber der Film-Dehnungs-Methode ist die relativ breite Größenverteilung der verstreckten Partikel. Jedoch ist Elektrospinnen im Gegensatz zur Film-Dehnungs-Methode ein kontinuierlicher Prozess und könnte auch für die Herstellung anisotroper Partikel von Polymeren mit einer hohen Glasübergangstemperatur verwendet werden.

Morphology control in metallocene-catalyzed polyolefin synthesis

The main aim of the work presented in this dissertation was the morphology control in metallocene-catalyzed polyolefin synthesis. This was studied by selective immobilization techniques on a variety of supports such as porous polyurethane particles (Chapter 3), electrospun fibers (Chapter 4 and 5), inorganic-organic hybrid core-shell particles (Chapter 6) and hollow silica particles (Chapter 7). Another aspect of this dissertation was modulating a catalytic activity by controlling a size of boron-based cocatalysts (Chapter 8).

Non-aqueous dispersions of particles and their applications

In the current work, three studies about non-aqueous dispersions of particles were carried out by using an amphiphilic block copolymer poly(isoprene)-block-poly(methyl methacrylate) (PI-b-PMMA) as stabilizer:rn1. Dispersions of polyurethane and polyurea porous particles for polymer compositesrn2. Dispersions of PMMA and PU particles with PDI dye for study of Single Molecule Spectroscopy Detectionrn3. Dispersions of graphene nanosheets for polymer compositesrnrnIn the first study, highly porous polyurethane and polyurea particles were prepared in a non-aqueous emulsion. The preparation of porous particles consisted of two parts: At first, a system was developed where the emulsion had high stability for the polymerization among diisocyanate, diol and water. In the second part, porous particles were prepared by using two methods fission/fusion and combination by which highly porous particles were obtained. In this study, the applications of porous particles were also investigated where polyurethane particles were tested as filling material for polymer composites and as catalyst carrier for polyethylene polymerization. rnrnIn the second study, PMMA and PU particles from one non-aqueous emulsion were investigated via single molecule fluorescence detection. At first the particles were loaded with PDI dye, which were detected by fluorescence microscopy. The distribution and orientation of the PDI molecules in the particles were successfully observed by Single Molecule Fluorescence Detection. The molecules were homogenously distributed inside of the particles. In addition they had random orientation, meaning that no aggregations of dye molecules were formed. With the results, it could be supposed that the polymer chains were also homogenously distributed in the particles, and that the conformation was relatively flexible. rnrnIn the third part of the study, graphene nanosheets with high surface area were dispersed in an organic solvent with low boiling point and low toxicity, THF, stabilized with a block copolymer PI-b-PMMA. The dispersion was used to prepare polymer composites. It was shown that the modified graphene nanosheets had good compatibility with the PS and PMMA matrices. rn

Strukturbildung in Polyurethandispersionen und -filmen

Mechanische Eigenschaften nach Verfilmen sind häufig die wichtigsten Anforderungen für Polyurethandispersionen, so werden beispielsweise in den Hauptanwendungen im Beschichtungs- und Klebstoffsektor oftmals hohe Festigkeiten benötigt. Diese Anforderungen werden in der Dissertation durch eine gezielte Strukurbildung in den Polymeren adressiert. Mit einer hohen Kontrolle über den Polymeraufbau, durch die Ausbildung von kristallinen Bereichen, sowie mit phasenseparierten Morphologien werden drei Konzepte für die Modifikation der mechanischen Eigenschaften vorgestellt: Eine chemische bzw. kovalente Vernetzung wird mit funktionalisierten Polyurethanen erreicht, die physikalische Vernetzung kann reversibel die mechanische Festigkeit von Filmen erhöhen und Hybride mit kontrollierter Morphologie zeigen eine Kombination von Vorteilen ihrer Einzelbestandteile. Ferner zeichnen sich die synthetisierten Polyurethane gegenüber anderen Polymerklassen durch ihre relativ einfache Synthese und die Möglichkeit zur Herstellung multifunktionaler Materialien aus.

Long-term evaluation of myoblast seeded patches implanted on infarcted rat hearts

Cell transplantation presents great potential for treatment of patients with severe heart failure. However, its clinical application was revealed to be more challenging than initially expected in experimental studies. Further investigations need to be undertaken to define the optimal treatment conditions. We previously reported on the epicardial implantation of a bio-engineered construct of skeletal myoblast-seeded polyurethane and its preventive effect on progression toward heart failure. In the present study, we present a long-term evaluation of this functional outcome. Left anterior descending coronary ligation was performed in female Lewis rats. Two weeks later, animals were treated with either epicardial implantation of biograft, acellular scaffold, sham operation, or direct intramyocardial skeletal myoblast injection. Functional assessments were performed with serial echocardiographies every 3 months and end point left ventricle pressure was assessed. Hearts were then harvested for histological examinations. Myocardial infarction induced a slow and progressive reduction in fractional shortening after 3 months. Progression toward heart failure was significantly prevented for up to 6 months after injection of myoblasts and for up to 9 months following biograft implantation. Nevertheless, this effect vanished after 12 months, with immunohistological examinations revealing an absence of the transplanted myoblasts within the scaffold. We demonstrated that tissue therapy is superior to cell therapy for stabilization of heart function. However, beneficial effects are transient.

An Investigation On The Use Of Microalgae For Biogas Enrichment

There is a need for biomethane capture and carbon dioxide sequestration to mitigate evident global climate change. This research work investigated the potential for microalgae to remove CO2 from biogas as a biotechnical method for upgrading the thermal value for subsequent compression, liquification, or introduction to natural gas pipelines. Because biogas is largely methane, the effect of high methane environments on mixed microalgae was explored and found that specific carbon utilization rates were not statistically different when microalgae were exposed to biogas environments (70% v/v CH4) , relative to high CO2 environment. The uses of conventional bubbled column photobioreactors (PBR) were assessed for CO2 removal and subsequent CH4 enrichment. A continuously-bubbled biogas PBR (cB-PBR5) and intermittently-bubbled biogas PBR (iB-PBR) experienced CO2 loading rates of about 1664 and 832 mg C/L*day and showed 30.0 and 60.1 % carbon removal, respectively. However, a lack of biogas enrichment and issues associated growth inhibition due to high CO2 environments as well as stripping the dissolved gases, namely oxygen and nitrogen, from the bulk liquid and introduction to the outlet gas prompted the consideration for gas/liquid separation using nonporous hollow-fiber (HF) membranes for CO2 transfer. The potential for two non-porous HF membrane materials [polydimethylsiloxane (PDMS) and composite polyurethane (PU)] were modeled along fiber length using a mechanistic model based on polymeric material transport properties (Gilmore et al., 2009). Based on a high CO2:CH4 permeability selectivity for PU of 76.2 the model predicted gas enrichment along an 8.5 cm fiber length. Because PDMS permeability selectivity is low (3.5), evident gas transfer was not predicated along a 34.3 cm length. Both of these HF materials were implemented in hollow-fiber membrane-carbonated biofilm (HFMcB) PBRs for microalgal-mediated biogas enrichment. Phototrophic biofilm colonization occurred on the membrane, where CO2 concentration was greatest. The presence of a biofilm demonstrated greater resiliency to high CO2 environments, compared to the conventional PBRs. However, as the PDMS model predicted, the PDMS HFMcBs did not demonstrate gas enrichment. These reactors received CO2 loading rates of 200 mg C/L*day based on PDMS permeability flux and showed approximately 65% removal of the total C transferred across the membrane. Thus, the HFMcBs demonstrated controlled carbonation of the bulk liquid via a nonporous HF membrane. Likewise, the experimental PU HFMcB did not show gas enrichment yet this result should be further explored due to the high permeability selectivity of the polymeric material. Chemical stratifications, namely pH and dissolved O2, present in a PDMS membrane-carbonated biofilm were analyzed using electrochemical microsensors. Results indicated that high DO (20 mg L-1) exists at surface of the biofilm where light availability is greatest and low pH microenvironments (pH=5.40) exist deep in the biofilm where the diffusive flux of CO2 drives transfer through the biofilm. The presence of a 400-600 ¿m liquid phase boundary layer was evident from microsensor profiles. Cryosectioning of the biofilm samples showed the biofilm to be approximately 1.17 ± 0.07 mm thick, suggesting that the high localized concentration of biomass associated with the phototrophic biofilm aided in overcoming inhibition in a microenvironment dominated by CO2(aq). Challenges of biofilm detachment and PBR fouling as well as microalgal growth inhibition in the presence of high CO2 content remain for applications of microalgae for biogas enrichment.

Myoblast-seeded biodegradable scaffolds to prevent post-myocardial infarction evolution toward heart failure

OBJECTIVE(S): Even though the mechanism is not clearly understood, direct intramyocardial cell transplantation has demonstrated potential to treat patients with severe heart failure. We previously reported on the bioengineering of myoblast-based constructs. We investigate here the functional outcome of infarcted hearts treated by implantation of myoblast-seeded scaffolds. METHODS: Adult Lewis rats with echocardiography-confirmed postinfarction reduced ejection fraction (48.3% +/- 1.1%) were randomized to (1) implantation of myoblast-seeded polyurethane patches at the site of infarction (PU-MyoB, n = 11), (2) implantation of nonseeded polyurethane patches (PU, n = 11), (3) sham operation (Sham, n = 12), and (4) direct intramyocardial myoblast injection (MyoB, n = 11). Four weeks later, the functional assessment by echocardiography was repeated, and we additionally performed left ventricular catheterization plus histologic studies. RESULTS: The ejection fraction significantly decreased in the PU (39.1% +/- 2.3%; P = .02) and Sham (39.9% +/- 3.5%; P = .04) groups, whereas it remained stable in the PU-MyoB (48.4% +/- 3.1%) and MyoB (47.9% +/- 3.0%) groups during the observation time. Similarly, left ventricular contractility was significantly higher in groups PU-MyoB (4960 +/- 266 mm Hg/s) and MyoB (4748 +/- 304 mm Hg/s) than in groups PU (3909 +/- 248 mm Hg/s, P = .01) and Sham (4028 +/- 199 mm Hg/s, P = .01). Immunohistology identified a high density of myoblasts within the seeded scaffolds without any migration toward the host cardiac tissue and no evidence of cardiac cell differentiation. CONCLUSIONS: Myoblast-seeded polyurethane scaffolds prevent post-myocardial infarction progression toward heart failure as efficiently as direct intramyocardial injection. The immunohistologic analysis suggests that an indirect mechanism, potentially a paracrine effect, may be assumed.

Fabrication of nanoparticles by short-distance sputter deposition

During the past decades, tremendous research interests have been attracted to investigate nanoparticles due to their promising catalytic, magnetic, and optical properties. In this thesis, two novel methods of nanoparticle fabrication were introduced and the basic formation mechanisms were studied. Metal nanoparticles and polyurethane nanoparticles were separately fabricated by a short-distance sputter deposition technique and a reactive ion etching process. First, a sputter deposition method with a very short target-substrate distance is found to be able to generate metal nanoparticles on the glass substrate inside a RIE chamber. The distribution and morphology of nanoparticles are affected by the distance, the ion concentration and the process time. Densely-distributed nanoparticles of various compositions are deposited on the substrate surface when the target-substrate distance is smaller than 130mm. It is much less than the atoms’ mean free path, which is the threshold in previous research for nanoparticles’ formation. Island structures are formed when the distance is increased to 510mm, indicating the tendency to form continuous thin film. The trend is different from previously-reported sputtering method for nanoparticle fabrication, where longer distance between the target and the substrate facilitates the formation of nanoparticle. A mechanism based on the seeding effect of the substrate is proposed to interpret the experimental results. Secondly, in polyurethane nanoparticles’ fabrication, a mechanism is put forward based on the microphase separation phenomenon in block copolymer thin film. The synthesized polymers have formed dispersed and continuous phases because of the different properties between segments. With harder mechanical property, the dispersed phase is remained after RIE process while the continuous phase is etched away, leading to the formation of nanoparticles on the substrate. The nanoparticles distribution is found to be affected by the heating effect, the process time and the plasma power. Superhydrophilic property is found on samples with these two types of nanoparticles. The relationship between the nanostructure and the hydrophilicity is studied for further potential applications.