Nutrients distribution in diseased coffee leaf tissue

Knowing the structure and distribution of nutrients in plant tissues can clarify some mechanisms of pathogen attack in plants and plant defense against infection, thus helping management strategies. The aim of this study was verify differences in distribution of mineral nutrients in coffee leaf tissues around foliar lesions of bacterial blight of coffee, blister spot, cercospora leaf, phoma leaf spot and coffee leaf rust. Fragments of leaf tissue surrounding the lesions were dehydrated in silica gel, carbon covered and subjected to X-ray microanalysis (MAX). Thirty-three chemical elements were detected in leaf tissue; however, there was variation in potassium and calcium contents surrounding the lesions. The highest potassium content was found in asymptomatic tissues surrounding the lesions, decreasing toward the transition zone and reaching minimum content in symptomatic tissues. The highest calcium content was found in symptomatic tissues, decreasing toward the transition zone and reaching minimum content in asymptomatic tissues. Therefore, MAX can be used to analyze the composition and distribution of nutrients in plant tissues and, if associated with mineral nutrition, it may help understand host-pathogen relationships and plant disease management.

Nutrients in Amazonian Black Earth from Caxiuanã Region

Padrões de dispersão de nutrientes em terra preta Amazônica (TPA) podem dar informações sobre atividades antrópicas dos habitantes da Amazônia. Estudos sobre pH, fósforo disponível (P), matéria orgânica (MO) e os cátions trocáveis, Ca²⁺ e Mg²⁺, foram realizados em amostras de solos dos horizontes A₁ e A₂ ao longo de uma área com TPA (norte-sul e leste-oeste) em um sítio arqueológico denominado Ilha de Terra, na Unidade de Conservação Floresta Nacional de Caxiuanã, Município de Melgaço, Brasil. Os resultados indicaram que a MO e o Ca são os que apresentam maior dispersão. Correlações mais elevadas foram encontradas entre OM-Ca-Mg às proximidades da área central e levam a inferir que a dispersão geoquímica de MO, Ca, Mg e P em sítios arqueológicos com TPA está relacionada com atividades humanas pregressas.

Decomposição de resíduos vegetais de culturas de entressafra em sistema de semeadura direta e efeitos nos atributos químicos de um Latossolo e na produtividade de soja e milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência da sazonalidade sobre as águas estuarinas dos furos da ilha de Colares (baía do Marajó)

A caracterização das águas superficiais e intersticiais nos estuários é fundamental para desvendar as condições ambientais, qualidade ambiental e mudanças sazonais, que podem ocorrer em espaço menor como é o caso do furo da ilha de Colares. Este trabalho tem como objetivo mostrar a influência da sazonalidade nas águas estuarinas na foz Norte e Sul do furo da ilha de Colares e da contribuição das águas intersticiais para as águas superficiais. Os parâmetros físicos e químicos, e nutrientes contemplados são: índice pluviométrico (IP), temperatura, salinidade, pH, condutividade elétrica, sólidos totais dissolvidos, material particulado em suspensão, oxigênio dissolvido, profundidade de Secchi, nitrato, nitrito, N-amoniacal, fosfato, silicato e sulfato. A determinação destes parâmetros ocorreu de forma simultânea em cada foz do furo de Colares durante um ciclo de maré (13 horas) nos periodos chuvoso (10/04/2013) e menos chuvoso (05/10/2013). Os resultados revelam que a sazonalidade interfere nas condições abióticas das águas estuarinas do furo da ilha de Colares e deduz que o IP é o fator de maior efeito das mudanças dos parâmetros físicos e químicos e, sobretudo o maior responsável na mobilidade, disponibilidade e distribuição dos nutrientes dissolvidos, que foram encontrados em concentrações maiores no período chuvoso. Ainda os nutrientes nitrato e N-amoniacal foram considerados muito elevados na foz Norte, possivelmente relacionados com a influência de atividades antropogênica. Contudo foram considerados dentro dos limites estabelecidos pela Resolução 357 da CONAMA/05. Na foz Sul ocorreu níveis de pH fora do padrão estipulado pela Resolução da CONAMA, porém o fenômeno foi considerado natural visto que este em especifico se encontra distante de atividades antropogênicas. No período menos chuvoso o N-amoniacal foi considerado ausente na foz Norte e Sul. O manguezal foi considerado como fonte de salinidade, silicato e sulfato para as águas superficiais.

Dinâmica sazonal de nutrientes em estuário amazônico

Este artigo mostra a distribuição dos nutrientes no estuário do rio Paracauari, durante um ciclo hidrológico amazônico (2008), e no final do período de La Niña (abril de 2008). Esse estuário é influenciado por clima tropical úmido e meso-marés (3 a 4m), semi-diurna. A amostragem foi realizada em 10 estações em três períodos sazonais distintos: chuvoso (março), intermediário (junho) e menos chuvoso (setembro). Medimos “in situ” os parâmetros físico-químicos utilizando uma sonda multiparâmetro; analisamos os nutrientes dissolvidos (nitrato, nitrito, n-amoniacal, fosfato e silicato) por espectofotometria e o material particulado em suspensão por gravimetria. Observamos amplas variações sazonais nas concentrações dos parâmetros estudados. A temperatura da água (média de 28,58 ºC) é bastante homogênea, típica das águas tropicais. O pH variou de ácido (5,80) à alcalino (7,86) e a salinidade entre 0,06 a 7,56 ambos com valores máximos na foz, devido à maior influência marinha. As águas são mal oxigenadas no período chuvoso (2,35 mg.L-1) e bem no menos chuvoso (6,55 mg.L-1). As concentrações de material particulado em suspensão e de nutrientes foram máximas no período chuvoso devido ao aporte natural proveniente das áreas adjacentes.

Cycling of nutrients and silicon in pigeonpea and pearl millet monoculture and intercropping

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diurnal and nocturnal measurements of PAH, nitro-PAH, and oxy-PAH compounds in atmospheric particulate matter of a sugar cane burning region

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative study for hardwood and softwood forest biomass: Chemical characterization, combustion phases and gas and particulate matter emissions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of Physicochemical Surface Conditioning Methods for Adhesion of bis-GMA Resin Cement to Particulate Filler Composite and Surface Characterization

This study compared the effect of physicochemical surface conditioning methods on the adhesion of bis-GMA-based resin cement to particulate filler composite (PFC) used for indirect dental restorations. PFC blocks (N (block)=54, n (block)=9 per group) were polymerized and randomly subjected to one of the following surface conditioning methods: a) No conditioning (Control-C), b) Hydrofluoric acid (HF)etching for 60s (AE60), c) HF for 90s (AE90), d) HF for 120s (AE120), e) HF for 180s (AE180), and f) air-abrasion with 30 mu m silica-coated alumina particles (AB). The conditioned surfaces were silanized with an MPS silane, and an adhesive resin was applied. Resin composite blocks were bonded to PFC using resin cement and photo-polymerized. PFC-cement-resin composite blocks were cut under coolant water to obtain bar specimens (1mmx0.8mm). Microtensile bond strength test (mu TBS)was performed in a universal testing machine (1mm/min). After debonding, failure modes were classified using stereomicroscopy. Surface characterization was performed on a set of separate specimen surfaces using Scanning Electron Microscopy (SEM), X-Ray Dispersive Spectroscopy (XDS), X-Ray Photoelectron Spectroscopy (XPS), and Fourier Transform-Raman Spectroscopy (FT-RS). Mean mu TBS (MPa) of C (35.6 +/- 4.9) was significantly lower than those of other groups (40.2 +/- 5.6-47.4 +/- 6.1) (p<0.05). The highest mu TBS was obtained in Group AB (47.4 +/- 6.1). Prolonged duration of HF etching increased the results (AE180: 41.9 +/- 7), but was not significantly different than that of AB (p>0.05). Failure types were predominantly cohesive in PFC (34 out of 54) followed by cohesive failure in the cement (16 out of 54). Degree of conversion (DC) of the PFC was 63 +/- 10%. SEM analysis showed increased irregularities on PFC surfaces with the increased etching time. Chemical surface analyses with XPS and FT-RS indicated 11-70% silane on the PFC surfaces that contributed to improved bond strength compared to Group C that presented 5% silane, which seemed to be a threshold. Group AB displayed 83% SiO2 and 17% silane on the surfaces.

Espécies ácidas gasosas e íons majoritários no material particulado atmosférico de uma região agriícola do Mato Grosso

Pós-graduação em Química - IQ

Effects of litter manipulation in a tropical Eucalyptus plantation on leaching of mineral nutrients, dissolved organic nitrogen and dissolved organic carbon

Although many studies have shown that soil solution chemistry can be a reliable indicator of biogeochemical cycling in forest ecosystems, the effects of litter manipulations on the fluxes of dissolved elements in gravitational soil solutions have rarely been investigated. We estimated the fluxes of NH4-N, NO3-N, K, Ca, Mg, Na, Cl, dissolved organic nitrogen (DON) and dissolved organic carbon (DOC) over the first two years after re-planting Eucalyptus trees in the coastal area of Congo. Two treatments were replicated in two blocks after clear-cutting 7-year-old stands: in treatment R, all the litter above the mineral soil was removed before planting, and in a double slash (DS) treatment, the amount of harvest residues was doubled. The soil solutions were sampled down to a depth of 4 m and the water fluxes were estimated using the Hydrus 1D model parameterized from soil moisture measurements in 4 plots. Isotopic and spectroscopic analytical techniques were used to assess the changes in dissolved organic matter (DOM) properties throughout the transfer in the soil. The first year after planting, the fluxes of NH4-N, K, Ca, Mg, Na, Cl and DOC in the topsoil of the DS treatment were 2-5 times higher than in R, which showed that litter was a major source of dissolved nutrients. Nutrient fluxes in gravitational solutions decreased sharply in the second year after planting, irrespective of the soil depth, as a result of intense nutrient uptake by Eucalyptus trees. Losses of dissolved nutrients were noticeably low in these Eucalyptus plantations despite a low cation exchange capacity, a coarse soil texture and large amounts of harvest residues left on-site at the clear cut in the DS treatment. All together, these results clarified the strong effect of litter manipulation observed on eucalypt growth in Congolese sandy soils. DOM fluxes, as well as changes in delta C-13, C:N and aromaticity of DOM throughout the soil profile showed that the organic compounds produced in the litter layer were mainly consumed by microorganisms or retained in the topsoil. Below a depth of 15 cm, most of the DOC and the DON originated from the first 2 cm of the soil and the exchanges between soil solutions and soil organic matter were low. (C) 2014 Elsevier B.V. All rights reserved.

The physicochemical characterization and in vivo response of micro/nanoporous bioactive ceramic particulate bone graft materials

In this study, the physicochemical characteristics of calcium phosphate based bioactive ceramics of different compositions and blends presenting similar micro/nanoporosity and micrometer scale surface texture were characterized and evaluated in an in vivo model. Prior to the animal experiment, the porosity, surface area, particle size distribution, phase quantification, and dissolution of the materials tested were evaluated. The bone regenerative properties of the materials were evaluated using a rabbit calvaria model. After 2, 4, and 8 weeks, the animals were sacrificed and all samples were subjected to histologic observation and histomorphometric analysis. The material characterization showed that all materials tested presented variation in particle size, porosity and composition with different degrees of HA/TCP/lower stoichiometry phase ratios. Histologically, the calvarial defects presented temporal bone filling suggesting that all material groups were biocompatible and osteoconductive. Among the different materials tested, there were significant differences found in the amount of bone formation as a function of time. At 8 weeks, the micro/nanoporous material presenting similar to 55,TCP:45%,HA composition ratio presented higher amounts of new bone regeneration relative to other blends and a decrease in the amount of soft tissue infiltration. (C) 2014 Elsevier B.V. All rights reserved.

Fibrolytic enzyme production of Myceliophthora thermophila M.7.7. using inexpensive carbon sources and mineral nutrients

This study investigated the effect of inexpensive carbon and nitrogen sources on enzyme production by Myceliophthora thermophila M.7.7 in solid-state fermentation. Three kinds of lignocellulosic waste (corn straw, sugarcane bagasse and sugarcane straw) and six nitrogen sources (urea, calcium nitrate, analytical ammonium sulphate, yeast extract, agricultural fertilizer NPK 20-05-20 and fertilizing grade ammonium sulphate) were tested. Some physical-chermical parameters of the fermentation, such as temperature, initial pH and moisture content of the substrate on enzyme production, were evoluated. The maximum activities of xylanase (446.9 U/ml) endoglucanase (94.7 U/ml) and beta-glucosidase (2.8 U/ml) were observed in a mixture of corn straw and wheat bran (1:1 w/w) as the carbon source using fertilizer grade ammonium sulphate as the nitrogen source. This production occurred for an incubation period of 96 h, at 40°C, with initial moisture content of 70% and pH 5.0. These results have significant interest since they could be used for the future production of enzymes in a low-cost industrial process.

Peat humic substances enriched with nutrients for agricultural applications: competion between nutrients and non-essential metals present in tropical soils

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)