The Tnt1 family member Retrosol copy number and structure disclose retrotransposon diversification in different Solanum species

Eukaryotic genome expansion/retraction caused by LTR-retrotransposon activity is dependent on the expression of full length copies to trigger efficient transposition and recombination-driven events. The Tnt1 family of retrotransposons has served as a model to evaluate the diversity among closely related elements within Solanaceae species and found that members of the family vary mainly in their U3 region of the long terminal repeats (LTRs). Recovery of a full length genomic copy of Retrosol was performed through a PCR-based approach from wild potato, Solanum oplocense. Further characterization focusing on both LTR sequences of the amplified copy allowed estimating an approximate insertion time at 2 million years ago thus supporting the occurrence of transposition cycles after genus divergence. Copy number of Tnt1-like elements in Solanum species were determined through genomic quantitative PCR whereby results sustain that Retrosol in Solanum species is a low copy number retrotransposon (1-4 copies) while Retrolyc1 has an intermediate copy number (38 copies) in S. peruvianum. Comparative analysis of retrotransposon content revealed no correlation between genome size or ploidy level and Retrosol copy number. The tetraploid cultivated potato with a cellular genome size of 1,715 Mbp harbours similar copy number per monoploid genome than other diploid Solanum species (613-884 Mbp). Conversely, S. peruvianum genome (1,125 Mbp) has a higher copy number. These results point towards a lineage specific dynamic flux regarding the history of amplification/activity of Tnt1-like elements in the genome of Solanum species.

One, two or no record of late neoproterozoic glaciation in South-East Cameroon?

Severe climate changes culminating in at least three major glacial events have been recognized in the Neoproterozoic sedimentary record from many parts of the world Supportive to the global nature of these climatic shifts a considerable amount of data have been acquired from deposits exposed in Pan-African orogenic belts in southwestern and western Africa By comparison published data from the Pan-African belts in Central Africa are scarce We report here evidence of possibly two glacial events recorded in the Mintom Formation that is located on the margin of the Pan-African orogenic Yaounde belt in South-East Cameroon In the absence of reliable radiometric data only maximum and minimum age limits of 640 and 580 Ma respectively can at present be applied to the Mintom Formation The formation consists of two lithostratigraphic ensembles each subdivided in two members (i e in ascending stratigraphic order the Kol Metou Momibole and Atog Adjap Members) The basal ensemble exhibits a typical glacial to post-glacial succession It includes diamictites comprising cobbles and boulders in a massive argillaceous siltstone matrix and laminated siltstones followed by in sharp contact a 2 m-thick massive dolostone that yielded negative delta(13)C values (<-3 parts per thousand. V-PDB) similar to those reported for Marinoan cap carbonates elsewhere However uncertainty remains regarding the glacial influence on the siliciclastic facies because the diamictite is better explained as a mass-flow deposit and diagnostic features such as dropstones have not been seen in the overlying siltstones The Mintom Formation may thus provide an example of an unusual succession of non-glacial diamictite overlain by a truly glacial melt-related cap-carbonate We also report the recent discovery of ice-striated pavements on the structural surface cut in the Mintom Formation suggesting that glaciers developed after the latter had been deposited and deformed during the Pan-African orogeny Striations which consistently exhibit two principal orientations (N60 and N110) were identified in two different localities in the west of the study area on siltstones of the Kol Member and in the east on limestones of the Atog Adjap Member respectively N60-oriented striae indicate ice flow towards the WSW Assigning an age to these features remains problematical because they were not found associated with glaciogenic deposits Two hypotheses can equally be envisaged e either the striated surfaces are correlated (1) to the Gaskiers (or Neoproterozoic post-Gaskiers) glaciation and represent the youngest Ediacaran glacial event documented in the southern Yaounde belt or (2) to the Late Ordovician Hirnantian (Saharan) glaciation thereby providing new data about Hirnantian ice flows in Central Africa (C) 2010 Elsevier Ltd All rights reserved

Detaljhandelns användande av frontlinjepersonalen, som betydelsefull faktor för kundrelationer och skapande av intäkt

Syftet med denna studie var att komma fram till om kedjeföretag inom detaljhandeln intagit ett serviceperspektiv, där fokus ligger på relationer. Detta genom att undersöka hur aktörerna använder sin frontlinjepersonal. En kvalitativ flerfallstudie har genomförts där tre kedjeföretag bidragit med information rörande transaktions- eller relationsorienterad försäljning, medarbetarskap och betraktande av frontlinjepersonalen. Utgångspunkten för analys av fallstudierna har varit två intervjuer per företag. Dels med butikens högste chef samt med en medarbetare. Det teoretiska ramverket i denna studie rörande medarbetarskap, skapande av värde/nytta för kund samt intern marknadsföring som möjliggör att kund upplever hög tjänstekvalité, signalerar ett tankesätt inom ett serviceperspektiv och används för att svara på syftet. Huruvida kedjeföretagen intagit ett serviceperspektiv fullt ut, är inte möjligt att konkludera i denna småskaliga forskningsuppsats. Vidare forskning är nödvändig. Resultatet från de undersökta företagen i denna studie visar på tendenser till att utveckla ett serviceperspektiv med fokus på goda kundrelationer, vilket är det som skall ge framgång. De undersökta kedjeföretagen skiljer sig dock åt vad gäller intagandet av ett serviceperspektiv. Exempelvis förlitar sig ett företag alltjämt till lågt pris och produktens egenskaper som primära faktorer för intäktsskapande, medan andra premierar det personliga mötet.

A Reappraisal in Sao Paulo, Brazil (2008) of "The Ecology of Medical Care:" The "One Per Thousand's Rule"

BACKGROUND AND OBJECTIVES: Medical ecology is a conceptual framework introduced in 1961 to describe the relationship and utilization of health care services by a given population. We applied this conception to individuals enrolled in a private health maintenance organization (HMO) in Sao Paulo, Brazil, with the aim of describing the utilization of primary health care, verifying the frequency of various symptoms, and identifying the roles of different health care sources. METHODS: This was a cross-sectional telephone survey among a random sample of people enrolled in a private HMO. We interviewed a random sample of non-pregnant adults over age 18 using 10 questions about symptoms and health care use during the month prior to interview. RESULTS: The final sample consisted of 1,065 participants (mean age 68 years, 68% female). From this sample, 424 (39.8%) reported the presence of symptoms, 311 (29.2%) had a medical office consult, 104 (9.8%) went directly to an emergency medical department, 63 (5.9%) were hospitalized, 22 (2.1%) used complementary medicine resources, seven (0.7%) were referred to home care, and one (0.1%) was admitted to an academic hospital. CONCLUSIONS: The proportion of study participants referred to an academic care center was similar to that observed in previous "medical ecology" studies in different populations.

Analisi funzionale dei recettori per le neurotrofine p75NTR e Trka in neuroblastoma

The biological complexity of NGF action is achieved by binding two distinct Neurotrophin receptors, TrkA and p75NTR. While several reports have provided lines of evidence on the interaction between TrkA and p75NTR at the plasma membrane, much fewer data are available on the consequence of such an interaction in terms of intracellular signaling. In this study, we have focused on how p75NTR may affect TrkA downstream signaling with respect to neuronal differentiation. Here, we have shown that cooperation between p75NTR and TrkA results in an increased NGF-mediated TrkA autophosphorylation, leads to a sustained activation of ERK1/2 and accelerates neurite outgrowth. Interestingly, neurite outgrowth is concomitant with a selective enhancement of the AP-1 activity and the transcriptional activation of genes such as GAP-43 and p21(CIP/WAF), known to be involved in the differentiation process. Collectively, our results unveil a functional link between the specific expression profile of neurotrophin receptors in neuronal cells and the NGF-mediated regulation of the differentiation process possibly through a persistent ERKs activation and the selective control of the AP-1 activity. In our studies we discuss the functional role of the neurotrophin receptor p75NTR and TrkA in a ligand-dependent signal transduction. It is known that p75NTR is also involved in the mediation of cell death ligand dependent. Here we show for the first time that the membrane receptor p75NTR, upon binding to b- Amyloid (Ab) peptide, is able to transduce a cytotoxic signal through a mechanism very similar to the one adopted by Tumor Necrosis Factor Receptor 1 (TNFR1), when activated by TNFa. We define that in neuroblastoma cell line Ab cytotoxicity signals through a pathway depending on p75NTR death domain (DD), mostly through some specific conserved residues. We identified that TRADD is the first interactor recruiting to the membrane and activates JNK and NF-kB transcription factors. Since Ab is defined as the most important aetiologic element associated with the Alzheimer’s Disease (AD), characterization of the mechanism involved in the mediation of the neurodegeneration can suggest also new therapeutic approaches.

One-step elettrosintesi: un metodo alternativo per sintetizzare nanoparticelle di Pt

La maggiore richiesta energetica di questi anni, associata alla diminuzione delle riserve di combustibile fossile e ai problemi di inquinamento ambientale hanno spinto il settore scientifico verso la ricerca di nuovi dispositivi che presentino elevata efficienza e quantità di emissioni ridotta. Tra questi, le celle a combustibile (fuel cells) alimentate con idrogeno o molecole organiche come etanolo, acido formico e metanolo, hanno particolare rilevanza anche se attualmente risultano particolarmente costose. Una delle principali sfide di questi ultimi anni è ridurne i costi e aumentarne l'efficienza di conversione in energia. Per questo scopo molti sforzi vengono condotti verso l'ottimizzazione dei catalizzatori a base di Pt spostando l’attenzione verso sistemi nanostrutturati ad elevata attività catalitica e buona stabilità. Durante questo lavoro di tesi si è affrontato lo studio relativo alla preparazione di elettrodi modificati con PtNPs ottenute per elettrodeposizione, un metodo semplice ed efficace per poterne controllare i parametri di deposizione e crescita e per ottenere direttamente le nanoparticelle sulla superficie dell’elettrodo. Come materiale elettroattivo si è utilizzato un foglio di grafite, denominato (Pure Graphite Sheet = PGS). Tale superficie elettrodica, meno costosa e più conduttiva rispetto all’ITO, si presenta sotto forma di fogli flessibili resistenti ad alte temperature e ad ambienti corrosivi e quindi risulta conveniente qualora si pensi ad un suo utilizzo su scala industriale. In particolare è stato studiato come la variazione di alcuni parametri sperimentali quali: i) il tempo di elettrodeposizione e ii) la presenza di stabilizzanti tipo: KI, acido dodecil benzene sulfonico (DBSA), poli vinil pirrolidone (PVP) o poliossietilene ottilfenil etere (Triton-X100) e iii) la concentrazione degli stessi stabilizzanti, potessero influire sulle dimensioni ed eventualmente sulla morfologia delle PtNPs. in fase di elettrodeposizione. L’elettrosintesi è stata effettuata per via cronoamperometria. I film di PtNPs sono stati caratterizzati utilizzando tecniche di superficie quali microscopia a scansione elettronica (SEM) e Voltammetria Ciclica (CV). Al fine di valutare le capacità elettrocatalitiche delle diverse PtNPs ottenute si è studiata la reazione di ossidazione del metanolo in ambiente acido.

Trattamenti ad aria calda per la decontaminazione superficiale delle uova in guscio

In order to improve the animal welfare, the Council Directive 1999/74/EC (defining minimum standards for the welfare of laying hens) will ban conventional cage systems since 2012, in favour of enriched cages or floor systems. As a consequence an increased risk of bacterial contamination of eggshell is expected (EFSA, 2005). Furthermore egg-associated salmonellosis is an important public health problem throughout the world (Roberts et al., 1994). In this regard the introduction of efficient measures to reduce eggshell contamination by S. Enteritidis or other bacterial pathogens, and thus to prevent any potential or additional food safety risk for Human health, may be envisaged. The hot air pasteurization can be a viable alternative for the decontamination of the surface of the egg shell. Few studies have been performed on the decontamination power of this technique on table eggs (Hou et al, 1996; James et al., 2002). The aim of this study was to develop innovative techniques to remove surface contamination of shell eggs by hot air under natural or forced convection. Initially two simplified finite element models describing the thermal interaction between the air and egg were developed, respectively for the natural and forced convection. The numerical models were validated using an egg simulant equipped by type-K thermocouple (Chromel/Alumel). Once validated, the models allowed the selection of a thermal cycle with an inner temperature always lower than 55°C. Subsequently a specific apparatus composed by two hot air generators, one cold air generator and rolling cylinder support, was built to physically condition the eggs. The decontamination power of the thermal treatments was evaluated on shell eggs experimentally inoculated with either Salmonella Enteritidis, Escherichia coli, Listeria monocytogenes and on shell eggs containing only the indigenous microflora. The applicability of treatments was further evaluated by comparing quality traits of treated and not treated eggs immediately after the treatment and after 28 days of storage at 20°C. The results showed that the treatment characterized by two shots of hot air at 350°C for 8 sec, spaced by a cooling interval of 32 (forced convection), reduce the bacterial population of more than 90% (Salmonella enteritidis and Listeria monocytogenes). No statistically significant results were obtained comparing E. coli treated and not treated eggs as well as indigenous microflora treated and not treated eggs. A reduction of 2.6 log was observed on Salmonella enteritidis load of eggs immediately after the treatment in oven at 200°C for 200 minutes (natural convection). Furthermore no detrimental effects on quality traits of treated eggs were recorded. These results support the hot air techniques for the surface decontamination of table eggs as an effective industrial process.

Studio numerico e sperimentale delle miscele di aggregati per i conglomerati bituminosi

I crescenti volumi di traffico che interessano le pavimentazioni stradali causano sollecitazioni tensionali di notevole entità che provocano danni permanenti alla sovrastruttura. Tali danni ne riducono la vita utile e comportano elevati costi di manutenzione. Il conglomerato bituminoso è un materiale multifase composto da inerti, bitume e vuoti d'aria. Le proprietà fisiche e le prestazioni della miscela dipendono dalle caratteristiche dell'aggregato, del legante e dalla loro interazione. L’approccio tradizionalmente utilizzato per la modellazione numerica del conglomerato bituminoso si basa su uno studio macroscopico della sua risposta meccanica attraverso modelli costitutivi al continuo che, per loro natura, non considerano la mutua interazione tra le fasi eterogenee che lo compongono ed utilizzano schematizzazioni omogenee equivalenti. Nell’ottica di un’evoluzione di tali metodologie è necessario superare questa semplificazione, considerando il carattere discreto del sistema ed adottando un approccio di tipo microscopico, che consenta di rappresentare i reali processi fisico-meccanici dai quali dipende la risposta macroscopica d’insieme. Nel presente lavoro, dopo una rassegna generale dei principali metodi numerici tradizionalmente impiegati per lo studio del conglomerato bituminoso, viene approfondita la teoria degli Elementi Discreti Particellari (DEM-P), che schematizza il materiale granulare come un insieme di particelle indipendenti che interagiscono tra loro nei punti di reciproco contatto secondo appropriate leggi costitutive. Viene valutata l’influenza della forma e delle dimensioni dell’aggregato sulle caratteristiche macroscopiche (tensione deviatorica massima) e microscopiche (forze di contatto normali e tangenziali, numero di contatti, indice dei vuoti, porosità, addensamento, angolo di attrito interno) della miscela. Ciò è reso possibile dal confronto tra risultati numerici e sperimentali di test triassiali condotti su provini costituiti da tre diverse miscele formate da sfere ed elementi di forma generica.

Per un'archeologia del lavoro in eta' protobizantina. Organizzazione e committenza del cantiere edilizio attraverso i marchi dei marmorari

La ricerca riguarda lo studio del cantiere edilizio protobizantino, con particolare riferimento al ciclo della lavorazione del marmo. Quest’ultimo viene analizzato sotto il profilo amministrativo, tecnico, sociale ed artigianale. L’elemento guida della ricerca sono i marchi dei marmorari, sigle apposte da funzionari e maestranze durante il processo produttivo. Dapprima, fonti letterarie ed epigrafiche, tra cui le sigle di cava e officina su marmo, vengono esaminate per ricostruire il sistema alto-imperiale di amministrazione delle cave e di gestione dei flussi marmorei, nonché l’iter tecnico-artigianale adottato per la produzione dei manufatti. Il confronto con i dati disponibili per la tarda antichità, con particolare riferimento alle cave di Proconneso, evidenzia una sostanziale continuità della prassi burocratico-amministrativa, mentre alcuni cambiamenti si riscontrano nell’ambito produttivo-artigianale. Il funzionamento degli atelier marmorari viene approfondito attraverso lo studio dei marchi dei marmorari. Si tratta di caratteri greci singoli, multipli o monogrammi. Una ricognizione sistematica delle sigle dalla pars Orientalis dell’impero, reperite in bibliografia o da ricognizioni autoptiche, ha portato alla raccolta di circa 2360 attestazioni. Per esse si propone una classificazione tipologica tra sigle di cava, stoccaggio, officina. Tra le sigle di cava si annoverano sigle di controllo, destinazione/committenza, assemblaggio/posizionamento. Una particolare attenzione è riservata alle sigle di officina, riferibili ad un nome proprio di persona, ovvero al πρωτομαΐστωρ, il capo-bottega che supervisionava il lavoro dei propri artigiani e fungeva da garante del prodotto consegnato alla committenza. Attraverso lo studio comparato delle sigle reperite a Costantinopoli e in altri contesti si mette in luce la prassi operativa adottata dagli atelier nei processi di manifattura, affrontando anche il problema delle maestranze itineranti. Infine, sono analizzate fonti scritte di varia natura per poter collocare il fenomeno del marmo in un contesto socio-economico più ampio, con particolare riferimento alle figure professionali ed artigianali coinvolte nei cantieri e al problema della committenza.

Computer aided design and finite element modeling to predict bulk mechanical properties of bone scaffolds using triply periodic minimal surfaces (progettazione assistita al calcolatore ed analisi con il metodo degli elementi finiti per predire il comportamento meccanico di scaffolds ossei creati con l'uso di superfici minime periodiche in tre direzioni)

The aim of Tissue Engineering is to develop biological substitutes that will restore lost morphological and functional features of diseased or damaged portions of organs. Recently computer-aided technology has received considerable attention in the area of tissue engineering and the advance of additive manufacture (AM) techniques has significantly improved control over the pore network architecture of tissue engineering scaffolds. To regenerate tissues more efficiently, an ideal scaffold should have appropriate porosity and pore structure. More sophisticated porous configurations with higher architectures of the pore network and scaffolding structures that mimic the intricate architecture and complexity of native organs and tissues are then required. This study adopts a macro-structural shape design approach to the production of open porous materials (Titanium foams), which utilizes spatial periodicity as a simple way to generate the models. From among various pore architectures which have been studied, this work simulated pore structure by triply-periodic minimal surfaces (TPMS) for the construction of tissue engineering scaffolds. TPMS are shown to be a versatile source of biomorphic scaffold design. A set of tissue scaffolds using the TPMS-based unit cell libraries was designed. TPMS-based Titanium foams were meant to be printed three dimensional with the relative predicted geometry, microstructure and consequently mechanical properties. Trough a finite element analysis (FEA) the mechanical properties of the designed scaffolds were determined in compression and analyzed in terms of their porosity and assemblies of unit cells. The purpose of this work was to investigate the mechanical performance of TPMS models trying to understand the best compromise between mechanical and geometrical requirements of the scaffolds. The intention was to predict the structural modulus in open porous materials via structural design of interconnected three-dimensional lattices, hence optimising geometrical properties. With the aid of FEA results, it is expected that the effective mechanical properties for the TPMS-based scaffold units can be used to design optimized scaffolds for tissue engineering applications. Regardless of the influence of fabrication method, it is desirable to calculate scaffold properties so that the effect of these properties on tissue regeneration may be better understood.

Dallo spreco alimentare alla creazione di capitale sociale. Definizione di strumenti metodologici per la valutazione dell'impatto sociale dei progetti di recupero alimentare

Ogni anno in Europa milioni di tonnellate di cibo vengono gettate via. Una stima pubblicata dalla Commissione europea afferma che, nei 27 Stati membri, 89 milioni di tonnellate di cibo, o di 179 kg pro capite, vengono scartati. Lo spreco si verifica lungo tutta la catena di agro alimentare; la riduzione dei rifiuti alimentari è diventata una delle priorità dell'agenda europea. La ricerca si concentra su un caso studio, Last Minute Market, un progetto di recupero di sprechi alimentari. L'impatto di questo progetto dal punto di vista economico e ambientale è già stato calcolato. Quello che verrà analizzato è l'impatto di questa iniziativa sulla comunità e in particolare sul capitale sociale, definito come "l'insieme di norme e reti che consentono l'azione collettiva". Obiettivo del presente lavoro è, quindi, quello di eseguire, attraverso la somministrazione di un questionario a diversi stakeholder del progetto, un’analisi confrontabile con quella del 2009 e di verificare a distanza di cinque anni, se l'iniziativa Last Minute Market abbia prodotto una crescita di capitale sociale nella comunità interessata da questa iniziativa. Per riassumere l’influenza del progetto sul capitale sociale in un indice sintetico, viene calcolato quello che verrà chiamato indice di "affidabilità del progetto" (definito in statistica, la "capacità di un prodotto, un sistema o un servizio di fornire le prestazioni richieste, per un certo periodo di tempo in condizioni predeterminate").

Geometrical optimization of a short-stem hip implant for the reduction of proximal stress shielding (ottimizzazione geometrica di uno stelo corto di protesi d?anca per la riduzione della schermatura del carico prossimale)

Nowadays the number of hip joints arthroplasty operations continues to increase because the elderly population is growing. Moreover, the global life expectancy is increasing and people adopt a more active way of life. For this reasons, the demand of implant revision operations is becoming more frequent. The operation procedure includes the surgical removal of the old implant and its substitution with a new one. Every time a new implant is inserted, it generates an alteration in the internal femur strain distribution, jeopardizing the remodeling process with the possibility of bone tissue loss. This is of major concern, particularly in the proximal Gruen zones, which are considered critical for implant stability and longevity. Today, different implant designs exist in the market; however there is not a clear understanding of which are the best implant design parameters to achieve mechanical optimal conditions. The aim of the study is to investigate the stress shielding effect generated by different implant design parameters on proximal femur, evaluating which ranges of those parameters lead to the most physiological conditions.

Analisi sperimentale sull'utilizzo del Microsoft Kinect One come sistema di Body Tracking per la realta virtuale in riabilitazione

In questo progetto di tesi sarà innanzitutto presentato il Kinect One e sarà fatta una panoramica sull’uso della realtà virtuale in ambito riabilitativo. In seguito sarà analizzato l’algoritmo di Body tracking, valutandone il comportamento in diverse situazioni pratiche e poi stimandone la precisione in statica. Sarà presentato un filtraggio per limitare il rumore in tempo reale e valutarne i pro ed i contro in funzione delle caratteristiche impostabili. Saranno presentate inoltre le metodologie con cui gli algoritmi integrati del Kinect permettono di ricavare una stima dell’orientamento delle parti anatomiche nello spazio ed alcune considerazioni circa le implicazioni pratiche di tali metodologie, anche in base alle osservazioni sul campo ottenute durante i mesi di realizzazione di questo progetto. Lo scopo è determinare se e come sia possibile utilizzare il Microsoft Kinect One come unico sistema di motion tracking del paziente in applicazioni cliniche di riabilitazione, quali limiti ci sono nel suo utilizzo e quali categorie di scenari e prove potrebbe supportare.

Projection structure of a member of the amino acid/polyamine/organocation transporter superfamily

The L-arginine/agmatine antiporter AdiC is a key component of the arginine-dependent extreme acid resistance system of Escherichia coli. Phylogenetic analysis indicated that AdiC belongs to the amino acid/polyamine/organocation (APC) transporter superfamily having sequence identities of 15-17% to eukaryotic and human APC transporters. For functional and structural characterization, we cloned, overexpressed, and purified wild-type AdiC and the point mutant AdiC-W293L, which is unable to bind and consequently transport L-arginine. Purified detergent-solubilized AdiC particles were dimeric. Reconstitution experiments yielded two-dimensional crystals of AdiC-W293L diffracting beyond 6 angstroms resolution from which we determined the projection structure at 6.5 angstroms resolution. The projection map showed 10-12 density peaks per monomer and suggested mainly tilted helices with the exception of one distinct perpendicular membrane spanning alpha-helix. Comparison of AdiC-W293L with the projection map of the oxalate/formate antiporter from Oxalobacter formigenes, a member from the major facilitator superfamily, indicated different structures. Thus, two-dimensional crystals of AdiC-W293L yielded the first detailed view of a transport protein from the APC superfamily at sub-nanometer resolution.

Servizi Sociali Territoriali e Università: Esempi di Sinergie Possibili per un Percorso di Qualità

Although – or because – social work education in Italy has for some 15 years now been exclusively in the domain of the university the relationship between the academic world and that of practice has been highly tenuous. Research is indeed being conducted by universities, but rarely on issues that are of immediate practice relevance. This means that forms of practice develop and become established habitually which are not checked against rigorous standards of research and that the creation of knowledge at academic level pays scant attention to the practice implications of social changes. This situation has been made even worse by the dwindling resources both in social services and at the level of the universities which means that bureaucratic procedures or imports of specialisations from other disciplines frequently dominate the development of practice instead of a theory-based approach to methodology. This development does not do justice to the actual requirements of Italian society faced with ever increasing post-modern complexity which is reflected also in the nature of social problems because it implies a continuation of a faith in modernity with its idea of technical, clear-cut solutions while social relations have decidedly moved beyond that belief. This discrepancy puts even greater strain on the personnel of welfare agencies and does ultimately not satisfy the ever increasing demands for quality and accountability of services on the part of users and the general public. Social workers badly lack fundamental theoretical reference points which could guide them in their difficult work to arrive at autonomous, situation-specific methodological answers not based on procedures but on analytical knowledge. Thirty years ago, in 1977, a Presidential Decree created the legal basis for the establishment of social service departments at the level of municipalities which created opportunities for the direct involvement of the community in the fight against exclusion. For this potential to be fully utilized it would have required the bringing together of three dimensions, the organizational structure, the opportunities for learning and research in the territory and the contribution by the professional community. As this did not occur social services in Italy still often retain the character of charity which does not concern itself with the actual causes of poverty and exclusion. This in turn affects the relationship with citizens in general who cannot develop trust in those services. Through uncritical processes of interaction Edgar Morin’s dictum manifests itself which is that without resorting to critical reflection on complexity interventions can often have an effect that totally the opposite to the original intention. An important element in setting up a dynamic interchange between academia and practice is the placement on professional social work courses. Here the looping of theory to practice and back to theory etc. can actually take place under the right organizational and conceptual conditions, more so than in abstract, and for practitioners often useless debates about the theory-practice connection. Furthermore, research projects at the University of Florence Social Work Department for instance aim at fostering theoretical reflection at the level of and with the involvement of municipal social service agencies. With a general constructive disposition towards research and some financial investment students were facilitated to undertake social service practice related research for their degree theses for instance in the city of Pistoia. In this way it was also possible to strengthen the confidence and professional identity of social workers as they became aware of the contribution their own discipline can make to practice-relevant research instead of having to move over to disciplines like psychology for those purposes. Examples of this fruitful collaboration were presented at a conference in Pistoia on 25 June 2007. One example is a thesis entitled ‘The object of social work’ and examines the difficult development of definitions of social work and comes to the conclusion that ‘nothing is more practical than a theory’. Another is on coping abilities as a necessary precondition for the utilization of resources supplied by social services in exceptional circumstances. Others deal with the actual sequence of interventions in crisis situations, and one very interestingly looks at time and how it is being constructed often differently by professionals and clients. At the same time as this collaboration on research gathers momentum in the Toscana, supervision is also being demanded more forcefully as complementary to research and with the same aim of profiling more strongly the professional identity of social work. Collaboration between university and social service filed is for mutual benefit. At a time when professional practice is under threat of being defined from the outside through bureaucratic prescriptions a sound grounding in theory is a necessary precondition for competent practice.