Estudo dos solos da região metropolitana de Fortaleza para aplicação na engenharia rodoviária

O trabalho aqui apresentado é resultado de uma pesquisa onde se procurou caracterizar os solos da Região Metropolitana de Fortaleza (RMF). Inicialmente, o objetivo deixou de ser principal devido às limitações desse método quando aplicado aos solos da RMF. O objetivo principal do trabalho passou a ser estudar mais detalhadamente os solos que ocorrem na Região Metropolitana de Fortaleza à luz de métodos convencionais e não convencionais, para aplicação na engenharia rodoviária. Para tanto, foram estudados sessenta solos pertencentes às classes pedológicas que ocorrem na RMF. Esses solos foram submetidos a um programa experimental que envolveu a execução de ensaios \"convencionais\" e \"não convencionais\". A partir dos resultados experimentais foram estabelecidas correlações entre os valores de algumas propriedades de interesse à pavimentação realizadas em cilindro convencional e miniatura. Tentou-se determinar o valor de CBR de um solo, dispondo das cargas calculadas no ensaio mini-CBR, mas essa tarefa não logrou êxito. As amostras foram classificadas pelas classificações HBR e MCT para verificação da qualidade da previsão das propriedades dos solos obtidas por esses métodos e aqueles resultantes da execução dos ensaios de laboratório. Foi proposto, a partir da execução de ensaio de adsorção de azul de metileno, a inclusão no ábaco de três zonas para se caracterizar o comportamento dos solos da RMF. Os resultados experimentais permitiram, também, concluir que pode-se identificar os materiais com potencial de uso na pavimentação de sua classe pedológica.

Otimização da inativação fotodinâmica de E. coli por fotossensibilizadores veiculados por nanopartículas de sílica

A nanotecnologia tem sido aplicada para o desenvolvimento de materiais para diversas aplicações inclusive na inativação de patógenos. As nanopartículas de sílica (npSi) destacam-se pela alta área superficial, facilidade na alteração da superfície para aumento da eficiência adsortiva, penetrabilidade e toxicidade para bactérias gram-negativas sendo biocompatíveis para células de mamíferos e mais foto-estáveis que a maioria dos compostos orgânicos. Devido as suas vantagens, as npSi podem ser usadas para veicular fotossensibilizadores (FSs) uma vez que permitem sua utilização em solução aquosa em que os FSs geralmente são insolúveis. Além disso, o uso de FSs em vez de antibióticos, permite a inativação microbiológica pela Terapia Fotodinâmica sem que as bactérias adquiram resistência por mecanismos genéticos. Esse processo ocorre pela interação entre um FS, luz e oxigênio molecular produzindo oxigênio singleto que é extremamente reativo danificando estruturas celulares. O objetivo desse estudo foi otimizar a fotoinativação dinâmica de E .coli utilizando Azul de Metileno (AM) e Azul de Toluidina O (ATO) veiculados por npSi. As npSi foram preparadas pela metodologia sol-gel, caracterizadas por microscopia eletrônica de varredura (MEV) e submetidas à adsorção de AM e ATO em sua superfície. A presença de AM e ATO na superfície das npSi foram analisadas por espectroscopia no infravermelho; espectroscopia de fluorescência por raio-X e análise termogravimétrica. O planejamento experimental, iniciado pelo fatorial 23 e modelado ao composto central em busca das condições ótimas foi adotado pela primeira vez nessa aplicabilidade, visando a fotoinativação de E. coli empregando AM e ATO em solução e em seguida com npSi. AM e ATO veiculados por npSi permitem a fotoinativação em concentrações mais baixas de FS (20 e 51% respectivamente), causando desestruturação da integridade bacteriana demonstrada por MEV. Os resultados sugerem que a veiculação de AM e ATO por npSi é extremamente efetiva para a fotoinativação dinâmica de E. coli e que o planejamento composto central pode levar à completa inativação das bactérias.

Novel Ti/Ta2O5-SnO2 electrodes for water electrolysis and electrocatalytic oxidation of organics

Mixed metal oxide (MMO) electrodes have been applied to different technologies including chlorine production, organic compounds oxidation, water electrolysis, electroplating, etc. due to their catalytic, optical and electronic properties. Most of the existing MMO electrodes contain either toxic metals or precious metals of the platinum group. The aim of this study was to develop environmentally friendly and cost-effective MMO electrodes for water and organic compounds oxidation. Ti/Ta2O5-SnO2 electrodes of different nominal composition were prepared, and electrochemically and physically characterized. For water oxidation, Ti/SnO2 electrode with 5 at.% of Ta produced the highest electroactivity. Ti/SnO2 electrode with 7.5 at.% of Ta showed the best performance for the oxidation of methylene blue (MB). The electrocatalytic activity of the Ti/Ta2O5-SnO2 electrodes increased with the number of active layers. The maximum current of water oxidation reached 3.5 mA at 2.5 V when the electrode was covered with ten layers of Ta2O5. In case of the oxidation of 0.1 mM MB, eight and ten active layers of Ta2O5 significantly increased the electrode activity. The prepared electrodes have been found applicable for both water electrolysis and organic compounds oxidation.

Linear low-density polyethylene colored with a nanoclay-based pigment: Morphology and mechanical, thermal, and colorimetric properties

In this study, a novel kind of hybrid pigment based on nanoclays and dyes was synthesized and characterized. These nanoclay-based pigments (NCPs) were prepared at the laboratory with sodium montmorillonite nanoclay (NC) and methylene blue (MB). The cation-exchange capacity of NC exchanged with MB was varied to obtain a wide color gamut. The synthesized nanopigments were thoroughly characterized. The NCPs were melt-mixed with linear low-density polyethylene (PE) with an internal mixer. Furthermore, samples with conventional colorants were prepared in the same way. Then, the properties (mechanical, thermal, and colorimetric) of the mixtures were assessed. The PE–NCP samples developed better color properties than those containing conventional colorants and used as references, and their other properties were maintained or improved, even at lower contents of dye compared to that with the conventional colorants.

Characterisation of montmorillonites simultaneously modified with an organic dye and an ammonium salt at different dye/salt ratios. Properties of these modified montmorillonites EVA nanocomposites

In this work, a sodium montmorillonite (Na+-Mt) was modified with two molecules simultaneously, an organic dye, methylene blue (MB), and ethyl hexadecyl dimethyl ammonium (EHDDMA). The synthesised organo-montmorillonites (OMt) combining different proportions of the two molecules were thoroughly characterised and mixed with ethylene vinyl acetate copolymer (EVA) in order to check the ability of these OMt as pigments and reinforcing additives. The synthesised OMt combining both surfactants, MB and EHDDMA, present higher interlayer distances than those with only MB, which were employed in previous works as nanopigments. When these OMt were incorporated in the EVA matrix, the obtained clay polymer nanocomposites (CPN) showed a high exfoliation degree of the OMt in the polymer, in such a way that at 80% of the cationic exchange capacity (CEC) of the Mt exchanged with EHDDMA, most of the OMt was exfoliated. Moreover, all the obtained CPN showed an increase in the Young's Moduli compared to the EVA reference, and especially those containing higher amounts of MB. The thermal stability of the CPN also increases with the MB content, compared to other CPN including conventional surfactants. The hiding power and colouring power achieved in the CPN are higher even with a much lower load of MB when EHDDMA is exchanged in the Mt.

Consumo de oxigénio em bivalves

Os organismos vivos obtêm energia degradando moléculas orgânicas através da respiração celular. Esse processo pode ocorrer com ou sem consumo de oxigénio. Em muitos seres vivos com células complexas, a respiração celular ocorre com consumo de oxigénio pelo que se designa de respiração aeróbia. O consumo de oxigénio pode ser observado utilizando uma substância indicadora de presença/ausência de O2. O indicador utilizado neste experiencia foi o azul-de-metileno que muda de cor conforme está na forma reduzida ou na forma oxidada. Os resultados mostram que ocorreu a redução do azul-de-metileno, o que significa que o oxigénio foi consumido. O objetivo desta atividade é observar a mobilização de energia em bivalves (Scrobicularria plana) vulgarmente chamada de Lambujinha através do consumo de O2.

Genetically engineered silk and genipin-enhanced fibrin hydrogel for annulus fibrosus repair

INTRODUCTION: Around 80% of people are affected by low back pain at least once in their life, often caused by trauma provoking intervertebral disc (IVD) herniation and/or IVD degeneration. Apart from some promising approaches for nucleus pulposus repair, so far no treatment or repair is available for the outer fibrous tissue, annulus fibrosus (AF). We aimed for sealing and repairing an AF injury in a bovine IVD organ culture model in vitro over 14 days under different loading conditions. For this purpose, a silk fleece composite from Bombyx mori silk was combined with genipin-enhanced fibrin hydrogel [1]. METHODS: Bovine IVDs of 12-17 months old animals were isolated by first removing all surrounding tissue, followed by cutting out the IVDs [2]. Culturing of discs occurred in high glucose Dulbecco's Modified Eagle Medium (HG-DMEM) supplemented with 5% serum as previously described. On the next day, injury was induced using a 2mm biopsy punch (Polymed, Switzerland). The formed cavity was filled with (0.4%) genipin-enhanced human based fibrin hydrogel (35- 55mg/mL human fibrinogen, Baxter, Austria) and sealed with a silk fleece-membrane composite (Spintec Engineering, Germany). Different culture conditions were applied: free swelling, static diurnal load of 0.2MPa for 8h/d and complex loading at 0.2MPa compression combined with ± 2° torsion at 0.2Hz for 8h/d. Complex loading was applied by a custom built 2 degree of freedom bioreactor [3]. After 14 days of culture cell activity was determined with resazurin assay. Additionally, glycosaminoglycan (dimethyl-methylene blue), DNA (Hoechst) and collagen content (hydroxy-proline) were determined. Finally, real-time qPCR of major IVD marker genes was performed. RESULTS: The silk seal closing the injury site could successfully withstand the forces of all three loading conditions with no misplacement over the two weeks’ culture. Nevertheless, disc height of the repaired discs did not significantly differ from the injured group. The disc phenotype could be maintained as demonstrated by biochemical analysis of gene expression, cell activity, DNA-, collagen- and GAG content. The silk itself was evaluated to be highly biocompatible for hMSC, as revealed by cytotoxicity assays. DISCUSSION & CONCLUSIONS: The silk can be considered a highly-elastic and biocompatible material for AF closure and the genipin-enhanced fibrin hydrogel has also good biomechanical properties. However, the cyto-compatibility of genipin seems rather poor and other hydrogels and/or cross-linkers should be looked into. REFERENCES: 1 C.C. Guterl et al. (2014) Characterization of Mechanics and Cytocompatibility of Fibrin Genipin Annulus Fibrosus Sealant with the Addition of Cell Adhesion Molecules, Tissue Eng Part A 2 S.C. Chan, B. Gantenbein-Ritter (2012) Preparation of intact bovine tail intervertebral discs for organ culture, J Vis Exp 3 B Gantenbein et al. (2015) Organ Culture Bioreactors - Platforms to Study Human Intervertebral Disc Degeneration and Regenerative Therapy, Curr Stem Cell Res Ther [epub ahead of print] ACKNOWLEDGEMENTS: This project is supported by the Gebert Rüf Stiftung project # GRS-028/13.

Limitations of microbial hydrocarbon degradation at the Amon Mud Volcano (Nile Deep Sea Fan)

The Amon mud volcano (MV), located at 1250 m water depth on the Nile Deep Sea Fan, is known for its active emission of methane and non-methane hydrocarbons into the hydrosphere. Previous investigations showed a low efficiency of hydrocarbon-degrading anaerobic microbial communities inhabiting the Amon MV center in the presence of sulphate and hydrocarbons in the seeping subsurface fluids. By comparing spatial and temporal patterns of in situ biogeochemical fluxes, temperature gradients, pore water composition and microbial activities over three years, we investigated why the activity of anaerobic hydrocarbon degraders can be low despite high energy supplies. We found that the central dome of the Amon MV, as well as a lateral mud flow at its base, showed signs of recent exposure of hot subsurface muds lacking active hydrocarbon degrading communities. In these highly disturbed areas, anaerobic degradation of methane was less than 2% of the methane flux. Rather high oxygen consumption rates compared to low sulphide production suggest a faster development of more rapidly growing aerobic hydrocarbon degraders in highly disturbed areas. In contrast, the more stabilized muds surrounding the central gas and fluid conduits hosted active anaerobic hydrocarbon-degrading microbial communities. Furthermore, within three years, cell numbers and hydrocarbon degrading activity increased at the gas-seeping sites. The low microbial activity in the hydrocarbon-vented areas of Amon mud volcano is thus a consequence of kinetic limitations by heat and mud expulsion, whereas most of the outer mud volcano area is limited by hydrocarbon transport.

Depth profiles of dissolved sulfide and sulfate in the pore water of hydrocarbon seep sediments offshore Pakistan

The interaction between fluid seepage, bottom water redox, and chemosynthetic communities was studied at cold seeps across one of the world's largest oxygen minimum zones (OMZ) located at the Makran convergent continental margin. Push cores were obtained from seeps within and below the core-OMZ with a remotely operated vehicle. Extracted sediment pore water was analyzed for sulfide and sulfate concentrations. Depending on oxygen availability in the bottom water, seeps were either colonized by microbial mats or by mats and macrofauna. The latter, including ampharetid polychaetes and vesicomyid clams, occurred in distinct benthic habitats, which were arranged in a concentric fashion around gas orifices. At most sites colonized by microbial mats, hydrogen sulfide was exported into the bottom water. Where macrofauna was widely abundant, hydrogen sulfide was retained within the sediment. Numerical modeling of pore water profiles was performed in order to assess rates of fluid advection and bioirrigation. While the magnitude of upward fluid flow decreased from 11 cm yr**-1 to <1 cm yr**-1 and the sulfate/methane transition (SMT) deepened with increasing distance from the central gas orifice, the fluxes of sulfate into the SMT did not significantly differ (6.6-9.3 mol m**-2 yr**-1). Depth-integrated rates of bioirrigation increased from 120 cm yr**-1 in the central habitat, characterized by microbial mats and sparse macrofauna, to 297 cm yr**-1 in the habitat of large and few small vesicomyid clams. These results reveal that chemosynthetic macrofauna inhabiting the outer seep habitats below the core-OMZ efficiently bioirrigate and thus transport sulfate down into the upper 10 to 15 cm of the sediment. In this way the animals deal with the lower upward flux of methane in outer habitats by stimulating rates of anaerobic oxidation of methane (AOM) with sulfate high enough to provide hydrogen sulfide for chemosynthesis. Through bioirrigation, macrofauna engineer their geochemical environment and fuel upward sulfide flux via AOM. Furthermore, due to the introduction of oxygenated bottom water into the sediment via bioirrigation, the depth of the sulfide sink gradually deepens towards outer habitats. We therefore suggest that - in addition to the oxygen levels in the water column, which determine whether macrofaunal communities can develop or not - it is the depth of the SMT and thus of sulfide production that determines which chemosynthetic communities are able to exploit the sulfide at depth. We hypothesize that large vesicomyid clams, by efficiently expanding the sulfate zone down into the sediment, could cut off smaller or less mobile organisms, as e.g. small clams and sulfur bacteria, from the sulfide source.

Aunt Harriet's household hints; an almanac of practical information,

Mode of access: Internet.

John Paul Jones: man of action,

Bibliography: p. 292-293.

Benjamin Franklin, the first civilized American

"Thirteenth printing"

Water surfactant no.3, study number 32. Report of a study conducted by Analytical Reference Service

Mode of access: Internet.

It can be done : poems of inspiration /

4th printing.

Campfires and battlefields : a pictorial narrative of the Civil War /

Includes index.