Structural change of laser-irradiated Ge2Sb2Te5 films studied by electrical property measurement

Sheet resistance of laser-irradiated Ge2Sb2Te5 thin films prepared by magnetron sputtering was measured by the four-point probe method. With increasing laser power the sheet resistance undergoes an abrupt drop from 10(7) to 10(3) Omega/square at about 580 mW. The abrupt drop in resistance is due to the structural change from amorphous to crystalline state as revealed by X-ray diffraction (XRD) study of the samples around the abrupt change point. Crystallized dots were also formed in the amorphous Ge2Sb2Te5 films by focused short pulse laser-irradiated, the resistivities at the crystallized dots and the non-crystallized area are 3.375 x 10(-3) and 2.725 Omega m, sheet resistance is 3.37 x 10(4) and 2.725 x 10(7) Omega/square respectively, deduced from the I-V Curves that is obtained by conductive atomic force microscope (C-AFM). (C) 2008 Elsevier B.V. All rights reserved.

Guided-mode resonant grating filter with an antireflective surface for the multiple channels

In this paper, a new type of guided-mode resonant grating (GMRG) filter with an antireflective surface called the 'moth-eye structure' for the multiple channels is presented by using rigorous coupled-wave analysis (RCWA) and the S-matrix method. Long range, low sidebands and multiple channels are found when the GMRG filters with antireflective surface are illuminated with incident polarization light. It is calculated that the multiple channel phenomenon can be shown when the depth of antireflective surface is increased. Moreover, the wavelengths of the multiple channels can be easily shifted by changing the depth of the homogenous layer which is under the antireflective surface, and the optical properties of GMRG filters such as low sideband reflection and narrow band are not badly spoiled when the depth is changed.

Surface relief resonant Brewster niters with multiple channels

In this paper, a new type of resonant Brewster filters (RBF) with surface relief structure for the multiple channels is first presented by using the rigorous coupled-wave analysis and the S-matrix method. By tuning the depth of homogeneous layer which is under the surface relief structure, the multiple channels phenomenon is obtained. Long range, extremely low sidebands and multiple channels are found when the RBF with surface relief structure is illuminated with Transverse Magnetic incident polarization light near the Brewster angle calculated with the effective media theory of sub wavelength grating. Moreover, the wavelengths of RBF with surface relief structure can be easily shifted by changing the depth of homogeneous layer while its optical properties such as low sideband reflection and narrow band are not spoiled when the depth is changed. Furthermore, the variation of the grating thickness does not effectively change the resonant wavelength of RBF, but have a remarkable effect on its line width, which is very useful for designing such filters with different line widths at desired wavelength.

Etymological notes on Aleut (III). With methodological notes on (Eskimo-Aleut) historical linguistics

[EN] The goal of this contribution is twofold: on the one hand, to review two relatively recent contributions in the field of Eskimo-Aleut historical linguistics in which it is proposed that Eskimo-Aleut languages are related genealogically to Wakashan (Holst 2004) and?/or Nostratic (Krougly-Enke 2008). These contributions can be characterized by saying that their authors have taken little care to be diligent and responsible in the application of the comparative method, and that their familiarity with the languages involved is insufficient. Eskimo-Aleut languages belong to a very exclusive group of language families that have been (and still are) used, sometimes compulsively, in the business of so-called “long-range comparisons”. Those carrying out such studies are very often unaware of the most basic facts regarding the philological and linguistic traditions of those languages, as a result of what mountains of very low quality works with almost no-relevancy for the specialist grow every year to the desperation of the scientific community, whose attitude toward them ranges from the most profound indifference to the toughest (and most explicit) critical tone. Since Basque also belongs to this group of “compare-with-everything-you-come- across” languages, it is my intention to provide the Basque readership with a sort of “pedagogical case” to show that little known languages, far from underrepresented in the field, already have a very long tradition in historical and comparative linguistics, i.e. nobody can approach them without previous acquaintance with the materials. Studies dealing with the methodological inappropriateness of the Moscow School’s Nostratic hypothesis or the incorrectness of many of the proposed new taxonomic Amerindian subfamilies (several of them involving the aforementioned Wakashan languages), that is to say, the frameworks on which Krougly-Enke and Holst work, respectively, are plenty (i.a. Campbell 1997: 260-329, Campbell & Poser 2008: 234-96), therefore there is no reason to insist once more on the very same point. This is the reason why I will not discuss per se Eskimo-Aleut–Wakashan or Eskimo-Aleut–Nostratic. On the contrary, I will focus attention upon very concrete aspects of Krougly-Enke and Holst´s proposals, i.e. when they work on “less ambitious” problems, for example, dealing with the minutiae of internal facts or analyzing certain words from the sole perspective of Eskimo-Aleut materials (in other words, those cases in which even they do not invoke the ad hoc help of Nostratic stuff). I will try to explain why some of their proposals are wrong, demonstrate where the problem lies, and fix it if possible. In doing so, I will propose new etymologies in an attempt at showing how we may proceed. The main difference between this and handbook examples lies in the reality of what we are doing: this is a pure etymological exercise from beginning to end. I will try to throw a bit of light on a couple of problematic questions regarding Aleut historical phonology, demonstrating how much work should be done at the lowest level of the Eskimo-Aleut pyramid; it is technically impossible to reach the peak of the pyramid without having completed the base. As far as Aleut is regarded, I will mainly profit not only from the use of the traditional philological analysis of Aleut (and, eventually, of Eskimo) materials, but also of diachronic typology, bringing into discussion what in my opinion seems useful, and in some cases I think decisive, parallels. It is worth noting that this paper makes up yet another part of a series of exploratory works dealing with etymological aspects of the reconstruction of Proto-Eskimo-Aleut, with special emphasis on Aleut (vid. i.a. Alonso de la Fuente 2006/2007, 2008a, 2008b, 2010a), whose main goal is to become the solid basis for an etymological dictionary of the Aleut language, currently in progress.

Diving behavior of immature Steller sea lions (Eumetopias jubatus)

Understanding the ontogenetic relationship between juvenile Steller sea lions (Eumetopias jubatus) and their foraging habitat is key to understanding their relationship to available prey and ultimately their survival. We summarize dive and movement data from 13 young-of-the-year (YOY) and 12 yearling Steller sea lions equipped with satellite dive recorders in the Gulf of Alaska and Aleutian Islands (n=18), and Washington (n=7) from 1994 to 2000. A total of 1413 d of transmission (x =56.5 d, range: 14.5–104.1 d) were received. We recorded 222,073 dives, which had a mean depth of 18.4 m (range of means: 5.8−67.9 m; SD=16.4). Alaska YOY dived for shorter periods and at shallower depths (mean depth=7.7 m, mean duration=0.8 min, mean maximum depth=25.7 m, and maximum depth=252 m) than Alaska yearlings (x =16.6 m, 0=1.1 min, x = 63.4 m, 288 m), whereas Washington yearlings dived the longest and deepest (mean depth=39.4 m, mean duration=1.8 min, mean maximum depth=144.5 m, and maximum depth=328 m). Mean distance for 564 measured trips was 16.6 km; for sea lions ≤10 months of age, trip distance (7.0 km) was significantly less than for those >10 months of age (24.6 km). Mean trip duration for 10 of the 25 sea lions was 12.1 h; for sea lions ≤10 months of age, trip duration was 7.5 h and 18.1 h for those >10 months of age. We identified three movements types: long-range trips (>15 km and >20 h), short-range trips (<15 km and <20 h) during which the animals left and returned to the same site, and transits to other haul-out sites. Long-range trips started around 9 months of age and occurred most frequently around the assumed time of weaning, whereas short-range trips happened almost daily (0.9 trips/day, n=426 trips). Transits began as early as 7 months of age, occurred more often after 9 months of age, and ranged between 6.5 and 454 km. The change in dive characteristics coincided with the assumed onset of weaning. These yearling sea lion movement patterns and dive characteristics suggest that immature Steller sea lions are as capable of making the same types of movements as adults.

Characterisation of technology roadmaps: Purpose and format

A report on characterisation of technology roadmaps, its purpose and formats are presented. A fast-start process is developed to support the initiation of technology roadmapping in firms to address the industrial needs. The purpose of each roadmap is related to a number of planning aims: product, capability, integration, strategic, long-range, programme and process planning. The second set of categories are related to the format of the roadmap, based on observed structure: multiple or single layers, bars, tables, graphs, pictorial forms, flow diagrams and text. It is concluded that technology roadmaps processes a great potential for supporting the development and implementation of business product and technology strategy.

Mutation analysis of a large Chinese pedigree with congenital preaxial polydactyly

Mutations in the long-range limb-specific cis-regulator (ZRS) could cause ectopic shh gene expression and are responsible for preaxial polydactyly (PPD). In this study, we analyzed a large Chinese isolated autosomal dominant PPD pedigree. By fine mapping

Evidence for Positive Selection on the Osteogenin (BMP3) Gene in Human Populations

Background: Human skeletal system has evolved rapidly since the dispersal of modern humans from Africa, potentially driven by selection and adaptation. Osteogenin (BMP3) plays an important role in skeletal development and bone osteogenesis as an antagonist of the osteogenic bone morphogenetic proteins, and negatively regulates bone mineral density. Methodology/Principal Findings: Here, we resequenced the BMP3 gene from individuals in four geographically separated modern human populations. Features supportive of positive selection in the BMP3 gene were found including the presence of an excess of nonsynonymous mutations in modern humans, and a significantly lower genetic diversity that deviates from neutrality. The prevalent haplotypes of the first exon region in Europeans demonstrated features of long-range haplotype homogeneity. In contrast with findings in European, the derived allele SNP Arg192Gln shows higher extended haplotype homozygosity in East Asian. The worldwide allele frequency distribution of SNP shows not only a high-derived allele frequency in Asians, but also in Americans, which is suggestive of functional adaptation. Conclusions/Significance: In conclusion, we provide evidence for recent positive selection operating upon a crucial gene in skeletal development, which may provide new insight into the evolution of the skeletal system and bone development.

Remote Wireless Communications for Construction Management: A Case Study

The recent advances in urban wireless communications and protocols that spurred the development of city-wide wireless infrastructure motivated this research, since in many cases, construction sites are not conveniently located for wired connectivity. Large scale transportation projects for example, such as new highways, railroad tracks and the networks of utilities (power-lines, phone lines, mobile towers, etc) that usually follow them are constructed in areas where wired infrastructure for data exchange is often expensive and time-consuming to deploy. The communication difficulties that can be encountered in such construction sites can be addressed with a wireless communications link between the construction site and the decision-making office. This paper presents a case study on long-range, wireless communications suitable for data exchange between construction sites and engineering headquarters. The purpose of this study was to define the requirements for a reliable wireless communications model where common types of electronic construction data will be exchanged in a fast and efficient manner, and construction site personnel will be able to interact and share knowledge, information and electronic resources with the office staff.

An analytical model for guided wave inspection optimization for prismatic structures of any cross section.

This paper presents an analytical modeling technique for the simulation of long-range ultrasonic guided waves in structures. The model may be used to predict the displacement field in a prismatic structure arising from any excitation arrangement and may therefore be used as a tool to design new inspection systems. It is computationally efficient and relatively simple to implement, yet gives accuracy similar to finite element analysis and semi-analytical finite element analysis methods. The model has many potential applications; one example is the optimization of part-circumferential arrays where access to the full circumference of the pipe is restricted. The model has been successfully validated by comparison with finite element solutions. Experimental validation has also been carried out using an array of piezoelectric transducer elements to measure the displacement field arising from a single transducer element in an 88.9-mm-diameter pipe. Good agreement has been obtained between the two models and the experimental data.