Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Estudo da incorporação da cal em composições binárias de solo-cimento para produção de tijolos maciços

The use of binders in the soil for the production of solid bricks is an old construction technique that has been used by several civilizations over time. At the same time, the need for environmental preservation and the tendency of scarcity of natural resources make the construction invest in researching new concepts, methods and materials for building systems for the sustainability of their economic activities. Thus arises the need to obtain building materials with low power consumption, capable of reducing the growing housing shortage of rural and urban population. Currently, research has been conducted on this topic to better understand the cementitious and pozzolanic reactions that occur in the formation of the microstructure of the soil-cement when added to other materials such as, for example, lime, and the relationship between microstructure and formed interfaces with the physical, mechanical and chemical analysis in compounds made from these ternary compositions. In this context, this study aimed to analyze the results of the influence of the incorporation of lime to the soil-cement to form a ternary mixture to produce soil-cement bricks and mortar without structural purposes. From the inclusion of contents of 6 %, 8 %, 10% and 12% lime to the soil, and soil-cement mixes in amounts of 2 %, 3 %, 4 % and 5 % were shaped-bodies of -cylindrical specimens to determine the optimum moisture content and maximum dry apparent specific weight. Then they were cured, and subjected to the tests of compressive strength, absorption and durability modified. Compositions obtained the best results in the tests performed on the bodies-of-proof cylindrical served as a parameter for molding of solid bricks, which underwent the same experimental methodology previously cited. The raw materials used, as well as compositions in which the bricks were molded solid, were characterized by physical and chemical tests, X-ray diffraction and scanning electron microscopy. The results obtained in the study indicate that the compositions studied, that showed the best results in terms of compressive strength, water absorption and durability ternary composition was soil, 10 % cement and 2 % lime

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

Influência da adição de cinza do bagaço de cana calcinada em sistemas de pastas para cimentação de poços petrolíferos

Cementing operation is one of the most important stages in the oil well drilling processes and has main function to form hydraulic seal between the various permeable zones traversed by the well. However, several problems may occur with the cement sheath, either during primary cementing or during the well production period. Cements low resistance can cause fissures in the cement sheath and compromise the mechanical integrity of the annular, resulting in contamination of groundwater and producing zones. Several researches show that biomass ash, in particular, those generated by the sugarcane industry have pozzolanic activity and can be added in the composition of the cementing slurries in diverse applications, providing improvements in mechanical properties, revenue and cement durability. Due to the importance of a low cost additive that increases the mechanical properties in a well cementing operations, this study aimed to potentiate the use of sugarcane bagasse ash as pozzolanic material, evaluate the mechanisms of action of this one on cement pastes properties and apply this material in systems slurries aimed to cementing a well with 800 m depth and geothermal gradient of 1.7 °F/100 ft, as much primary cementing operations as squeeze. To do this, the ash beneficiation methods were realized through the processes of grinding, sifting and reburning (calcination) and then characterization by X-ray fluorescence, XRD, TG / DTG, specific surface area, particle size distribution by laser diffraction and mass specific. Moreover, the ash pozzolanic activity added to the cement at concentrations of 0%, 20% and 40% BWOC was evaluated by pozzolanic activity index with lime and with Portland cement. The evaluation of the pozzolanic activity by XRD, TG / DTG and compressive strength confirmed the ash reactivity and indicated that the addition of 20% in the composition of cement slurries produces improvement 34% in the mechanical properties of the slurry cured. Cement slurries properties evaluated by rheological measurements, fluid loss, free fluid, slurry sedimentation, thickening time and sonic strength (UCA) were satisfactory and showed the viability of using the sugarcane ash in cement slurries composition for well cementing

Eutrofização e qualidade da água na piscicultura: consequências e recomendações

The eutrophication (cultural or anthropogenic) is induced by man and can have different origins, such as domestic sewage, industrial and agricultural activities, including the effluent still breeding systems of aquatic organisms. The expansion of aquaculture, with production of biomass and increase of nutrients in water may cause acceleration of productivity of algae, changing the ecology of aquatic systems. In addition, these waste water may present a risk to health through the transfer of pathogens from manure, plant residues, composted material, among others that are major sources of organic waste in some farming systems. Depending on the trophic level of fish ponds, which are dynamic environments, different planktonic species with short reproductive cycle and adapted to the changes contained in these systems can appear in high abundance. Water quality in the systems for raising fish is related to several factors, such as water source, management (liming, fertilizing, cleaning), cultivated species and quantity and composition of exogenous food. In order to minimize environmental impacts, there are techniques to improve the quality of water in fish farming systems and thus satisfactory answers can be obtained through the application of management practices. This paper aims to review the subject that deals with changes in water quality resulting from the activity of freshwater fish culture in Brazil. Search also recommend techniques of good management practices to minimize the impact generated by the activity.

Low glyphosate rates do not affect Citrus limonia (L.) Osbeck seedlings

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Glyphosate has low toxicity to citrus plants growing in the field

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

EFEITO do ÁCIDO GIBERÉLICO (AG3) NA FLORAÇÃO E PRODUÇÃO da LIMA ÁCIDA 'TAHITI' (Citrus latifolia Tan.)

A floração nos citros, assim como em outras fruteiras, é um dos fatores determinantes para a produção. A possibilidade de inibição ou redução da florada normal e alteração da época de produção para a lima 'Tahiti' é fator primordial para determinar sua rentabilidade econômica. O presente trabalho teve como objetivo avaliar o efeito do ácido giberélico sobre a florada, número de flores formadas, da lima ácida 'Tahiti', nas condições do Estado de São Paulo durante dois anos, buscando inibir a florada normal e observar o efeito desta inibição sobre produções temporãs. O delineamento experimental foi em blocos casualizados (5 blocos) com 3 plantas por tratamento. Foi utilizada uma planta como bordadura entre os tratamentos e uma linha de plantas entre os blocos. Os tratamentos foram: testemunha, 20, 40 e 80 mg/L de ácido giberélico (AG3) + 10 ml/L de espalhante adesivo, e o pH da água utilizada foi 6,2. As plantas foram tratadas com ácido giberélico durante o inverno (estação seca) após 50 dias sem irrigação no primeiro ano e 60 dias no segundo. O ácido giberélico reduziu o número de flores formadas (-81%) e aumentou a produção de frutos temporões (+59,77% ou +16,04 kg/pl).

Alterações anatômicas induzidas pelo cálcio na parede celular de frutos de goiabeira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desbaste da limeira-ácida-'Tahiti' (Citrus latifolia Tanaka) com TPA e efeitos na produção

Foram avaliadas concentrações de 0; 10; 20; 40 e 80 mg/L do 3,5,6-TPA (Ácid 3,5,6-tricloro-2-piridil- oxiacético), em sua formulação éster, para desbaste de frutos novos da limeira-ácida-'Tahiti' (Citrus latifolia Tanaka), nas condições ecológicas do Estado de São Paulo. O 3,5,6-TPA, na concentração 10mg/L, foi o tratamento mais eficaz para uso na cultura. Concentrações maiores causaram severos danos às plantas. Essa concentração, aplicada logo após a florada de outubro, reduziu em 65% a produção do mês de fevereiro seguinte. Todavia, as produções dos meses subseqüentes não diferiram entre si. A concentração de 10mg/L causou alongamento dos frutos, aumento da espessura da casca e redução do Brix, na época da colheita.

Enxertia em citros por substituição de ápice caulinar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito de níveis crescentes de calagem no crescimento e estado nutricional de fedegoso

A distribuição e desenvolvimento de plantas, a exemplo daquelas que infestam as áreas agrícolas, é influenciada por diversos fatores, a como aqueles ligados às caraterísticas do solo, naturais ou impostas pelo homem. Assim, o presente trabalho de pesquisa foi desenvolvido em condições de casa-de-vegetação com o objetivo de estudar o efeito de níveis crescentes de calagem no crescimento e estado nutricional de Senna obtusifolia, planta daninha comum em ecossistemas agrícolas. O delineamento experimental adotado foi o inteiramente casualizado, com seis tratamentos e quatro repetições. Os tratamentos constituíram-se em quantidades de calcário dolomítico calcinado com 38% de CaO e 20% de MgO, com um poder de neutralização total (PRNT) de 104%: 0, 2, 4, 6, 8 e 10 t/ha. As parcelas experimentais constituíram-se de recipientes de plástico com capacidade de 5 litros, preenchidos com terra coletada na camada arável de um latossolo vermelho escuro distrófico, A moderado, textura média. Após um período de crescimento de 56 dias as plantas foram coletadas e separadas em seus componentes vegetativos, sendo colocados a secar em estufa de circulação forçada de ar (70ºC por 72 horas) para determinação do peso seco. O material foi pesado e moído e analisado a nível de composição de nutrientes. Os resultados mostraram efeitos negativos dos níveis crescentes de calcário, sobre o crescimento das plantas de S. obtusifolia, evidenciando-se decréscimos nos valores da matéria seca acumulada a partir da dose de 4 t/ha de calcário (pH 5,8), com efeitos mais marcantes nas raízes. A aplicação de doses crescentes de calcário promoveu um aumento progressivo nos teores de Ca e Mg no solo, o que talvez possa ter estimulado a competição entre cátions, reduzindo a absorção do K. Os elementos N e P foram os mais absorvidos pela planta.

Effect of citrus sudden death on yield and quality of sweet orange cultivars in Brazil

Citrus sudden death (CSD) has greatly affected sweet orange cultivars grafted on Rangpur lime in São Paulo and Minas Gerais States, Brazil. To characterize and quantify CSD damage, fruit yield and quality were assessed in each combination of sweet orange cultivar (Hamlin, Pera, Natal, and Valencia), age class (3 to 5, 6 to 10, and 11 to 15 years old), and CSD severity class (0 = no symptom, 1 = initial symptoms, and 2 = severe symptoms). For each combination, 10 trees were harvested and 20 fruit were taken for quality analysis. Damage was characterized by reduc_ tion of: (i) total weight of fruit/tree (36 and 67% for severity class 1 and 2, respectively), (ii) number of fruit/tree (27 and 55%), (iii) fruit size (13 and 25% in diameter and height [stem to styler distance]), (iv) fruit weight (32 and 56%), (v) total soluble solids (TSS)/fruit (18 and 42%), and increase of (vi) Brix (14 and 34%), (vii) acidity (16 and 41%), and (viii) TSS/90-1b. box (21 and 33%). There was no alteration on Brix/acidity ratio and percentage of juice on fruit of affected trees. Sweet orange cultivars did not differ in percentage of reduction or increase of all yield and quality variables, with the exception of Pera, which expressed increases of Brix and acidity. For more severe affected trees, the youngest plants showed a higher reduction in fruit number/tree, whereas plants 6 to 10 years old showed a higher increase in fruit acidity and TSS/box. However, no differences in percentage of reduction or increase for other variables were observed among different age classes. The damage to the above probably was associated with reduced water absorption capacity of CSD-affected trees.

Danos da morte súbita dos citros sobre a produção de laranja

A Morte Súbita dos Citros (MSC) afeta laranjeiras doces (Citrus sinensis) e algumas tangerineiras (Citrus reticulata) enxertadas em limoeiro 'Cravo' (Citrus limonia) no norte do Estado de São Paulo e sul do Triângulo Mineiro. O progresso da doença nos pomares têm causado grande preocupação para o agronegócio citrícola. Para caracterizar e quantificar os danos causados pela MSC, a produção de frutos (peso total e número de frutos por planta e tamanho dos frutos) foi avaliada em quatro talhões para cada combinação variedade ('Hamlin', 'Pêra', 'Natal' e 'Valência') / classe de idade (três a cinco anos, seis a dez anos e 11 a 15 anos). em cada talhão, as plantas foram classificadas de acordo com a severidade de MSC (0 = sadia, 1 = sintomas iniciais e 2 = sintomas severos). Para cada nível de severidade foram colhidas dez plantas escolhidas ao acaso. Os danos foram caracterizados pela redução do peso total de frutos por planta (28% e 50% para o nível 1 e 2, respectivamente), do número total de frutos por planta (12% e 26% para o nível 1 e 2, respectivamente) e do tamanho do fruto (22% e 41% para nível 1 e 2, respectivamente). As variedades de laranja não diferiram em relação à porcentagem de redução para todas as variáveis de produção avaliadas. As plantas mais jovens tiveram a maior redução no número total de frutos por planta e as plantas com mais de cinco anos de idade tiveram as maiores reduções no tamanho dos frutos. As classes de idade não diferiram na porcentagem de redução do peso total de frutos por planta.

Geostatistical characterization of the spatial distribution of Xylella fastidiosa sharpshooter vectors on citrus

A distribuição espacial das espécies de cigarrinhas (Dilobopterus costalimai Young, Acrogonia sp. e Oncometopia facialis Signoret), vetoras da Xylella fastidiosa, agente causal da Clorose Variegada dos Citros, foi estudada com o uso da geoestatística. As avaliações foram feitas em um pomar comercial de laranja 'Pêra' (Citrus sinensis [L.] Osb.), objetivando estabelecer meios para melhor controle dos vetores e da doença. O monitoramento da ocorrência das cigarrinhas no pomar foi feito através de amostragens mensais, utilizando-se armadilhas adesivas amarelas de 3 x 5, distribuídas uniformemente em 50 pontos na área, dispostas em laranjeiras à altura de 1,5 m do solo e substituídas mensalmente. Acrogonia sp. foi a espécie prevalente nas amostragens. Os resultados possibilitaram ajustar modelos aos semivariogramas da distribuição espacial das três espécies no pomar estudado. Durante os três anos consecutivos de amostragem, as populações de Acrogonia sp., D. costalimai e O. facialis apresentaram modelos de distribuição agregada somente nos meses de verão, inverno e primavera, respectivamente, mostrando a necessidade de monitoramento constante desses vetores para reduzir a sua população em épocas favoráveis ao seu desenvolvimento. Através de parâmetros geoestatísticos foi possível calcular a área de agregação das cigarrinhas no pomar. A espécie Acrogonia sp. apresentou área média de agregação de 15.760 m², enquanto para O. facialis e D. costalimai foi possível constatar áreas médias de agregação de 11.555 m² e 10.980 m², respectivamente. Esses resultados indicaram que para um levantamento seguro de cigarrinhas é necessário pelo menos dispor de uma armadilha por hectare.