NUTRITIONAL AND AMINO ACID ANALYSIS OF RAW, PARTIALLY FERMENTED AND COMPLETELY FERMENTED LOCUST BEAN ( Parkia biglobosa ) SEEDS

The nutritional and amino acid analysis of raw and fermented seeds of Parkia biglobosa were carried out. Parameters investigated include moisture, crude protein, crude fat, ash, crude fibre and mineral contents; and the effect of the degree of fermentation on these parameters was also investigated. The amino acid compositions of all the samples were evaluated and amino acid quality determined by calculating amino acid scores and the predicted protein efficiency ratio (P-PER). Results showed that the proximate composition was significantly affected by fermentation, although there was little difference between the parameters for the partially fermented and completely fermented samples. Based on dry matter percentage, protein content was in the 39.77 – 43.74 % range while crude fibre ranged between 5.55 – 7.42 %. The ash content was lowest in the raw sample (2.34 %), while the fermented samples had ash contents between 4.27 and 8.33 % for the fully fermented and the partially fermented seeds, respectively. The fat content increased from 8.65 % in the raw seed to 24.4 % and 27.6 % for the partially and completely fermented samples, respectively. Results of the amino acid analysis showed that the partially fermented sample had the lowest quantities of all amino acids determined and had lysine as the limiting amino acid, whereas the raw and completely fermented samples had very similar amino acid profile with amino acid scores of 100, indicating that there are no limiting amino acids. All the samples were rich in essential amino acids. The P-PER also showed that the partially fermented sample had the lowest protein efficiency while the raw seed had the highest. Mineral contents generally increased from the raw, through the partially fermented, to the completely fermented seeds and results showed the samples to be good sources of potassium (K), calcium (Ca), manganese (Mn) and copper (Cu) in addition to being complementary sources of other metals. Locust bean seed does not accumulate lead and is, therefore, safe for consumption without the potential of food poisoning.

Role of phospholipase A(2) and tyrosine kinase in Clostridium difficile toxin A-induced disruption of epithelial integrity, histologic inflammatory damage and intestinal secretion

Clostridium difficile-associated disease causes diarrhea to fulminant colitis and death. We investigated the role of phospholipase A(2) (PLA(2)) inhibitors, aristolochic acid (AA), bromophenacyl bromide BPB and quinacrine (QUIN) on the C. difficile toxin A-induced disruption of epithelial integrity, histologic inflammatory damage and intestinal secretion. Toxin A caused severe hemorrhagic and inflammatory fluid secretion at 6-8 h in rabbit ileal segments, an effect that was significantly inhibited by QUIN (71%, P < 0.01), AA (87%, P < 0.0001) or by BPB (51%, P < 0.01). The secretory effect of toxin A was also inhibited in segments adjacent to those with AA (89%, P < 0.01). Furthermore, QUIN or AA substantially reduced the histologic damage seen after 6-8 h in rabbit ileal segments. The cyclooxygenase inhibitor, indomethacin, also significantly inhibited (96%; n = 6) the secretory effects of toxin A in ligated rabbit intestinal segments. The destruction by toxin A of F-actin at the light junctions of T-84 cell monolayers was not inhibited by AA or BPB. AA or QUIN had no effect on the T-84 cell tissue resistance reduction over 8-24 h after toxin A exposure. All the inhibitors were shown to be effective in the doses administered direct in ileal loops to inhibit PLA(2) activity. The data suggest that PLA(2) is involved in the major pathway of toxin A-induced histologic inflammatory damage and hemorrhagic fluid secretion. Cop. right (C) 2008 John Wiley & Sons, Ltd.

Renal and cardiovascular effects of Bothrops marajoensis venom and phospholipase A(2)

Bothrops marajoensis is found in the savannah of Marajo Island in the State of Par S and regions of Amapa State, Brazil. The aim of the work was to study the renal and cardiovascular effects of the B. marajoensis venom and phospholipase A(2) (PLA(2)). The venom was fractionated by Protein Pack 5PW. N-terminal amino acid sequencing of sPLA(2) showed amino acid identity with other lysine K49sPLA(2)s of snake venom. B. marajoensis venom (30 mu g/mL) decreased the perfusion pressure, renal vascular resistance, urinary flow, glomerular filtration rate and sodium tubular transport. PLA(2) did not change the renal parameters. The perfusion pressure of the mesenteric bed did not change after infusion of venom. In isolated heart, the venom decreased the force of contraction and increased PP but did not change coronary flow. In the arterial pressure, the venom and PLA(2) decreased mean arterial pressure and cardiac frequency. The presence of atrial flutter and late hyperpolarisation reversed, indicating QRS complex arrhythmia and dysfunction in atrial conduction. In conclusion, B. marajoensis venom and PLA(2) induce hypotension and bradycardia while simultaneously blocking electrical conduction in the heart. Moreover, the decrease in glomerular filtration rate, urinary flow and electrolyte transport demonstrates physiological changes to the renal system. (C) 2009 Elsevier Ltd. All rights reserved.

Avaliação do impacto de poluentes estrogénicos em peixes

Dissertação de Mestrado, Biologia Marinha, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Estudos comparativos do ciclo de regeneração de diferentes tipos de silicoaluminofosfatos

Different types of heterogeneous catalysts of the silicoaluminophosphate type, (SAPO-5, SAPO-11, SAPO-31, SAPO-34 and SAPO-41), molecular sieves with a: AFI, AEL, ATO, CHA and AFO structure, respectively, were synthesized through the hydrothermal method. Using sources such as hydrated alumina (pseudobohemita), phosphoric acid, silica gel, water, as well as, different types of organic structural templates, such as: cetyltrimethylammonium bromide (CTMABr), di-isopropylamine (DIPA), di-n- propylamine (DNPA) and tetraethylammonium hydroxide (TEOS), for the respective samples. During the preparation of the silicoaluminophosphates, the crystallization process of the samples occurred at a temperature of approximately 200 ° C, ranging through periods of 18-72 h, when it was possible to obtain pure phases for the SAPOs. The materials were furthermore washed with deionized water, dried and calcined to remove the molecules of the templates. Subsequently the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared region (FT-IR), specific surface area and thermal analysis via TG/DTG. The acidic properties were determined using adsorption of n-butylamine followed by programmed termodessorption. These methods revealed that the SAPO samples showed a typically weak to moderate acidity. However, a small amount of strong acid sites was also detected. The deactivation of the catalysts was conducted by artificially coking the samples, followed by n-hexane cracking reactions in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the catalysts regeneration and removal of the coke

Efeitos do tratamento superficial da sílica ativa com soluções de ácidos nítrico e fosfórico em propriedades do concreto

The addition of active silica potentially improves the quality of concrete due to its high reactivity and pore refinement effect. The reactivity of silica is likely related to its charge density. Variations in surface charge alter the reactivity of the material consequently affecting the properties of concrete. The present study aimed at investigating variations in the charge density of silica as a function of acid treatments using nitric or phosphoric acid and different pH values (2.0, 4.0 and 6.0). Effects on concrete properties including slump, mechanical strength, permeability and chloride corrosion were evaluated. To that end, a statistical analysis was carried out and empirical models that correlate studied parameters (pH, acid and cement) with concrete properties were established. The quality of the models was tested by variance analysis. The results revealed that the addition of silica was efficiency in improving the properties of concrete, especially the electrochemical parameters. The addition of silica treated using nitric acid at pH = 4.0 displayed the best cement performance including highest strength, reduced permeability and lowest corrosion current

Strategie di calcolo tra studenti discalculici e non

Sono stati analizzati i circuiti neurali addetti all'elaborazione matematica, a partire da quelli di start-up neurocognitivo per l'apprendimento del numero e del calcolo, capacità innate e già presenti alla nascita. I protagonisti sono il sistema della stima approssimativa del numero e quello di individuazione degli oggetti multipli e, spesso, le difficoltà che si incontrano durante un compito matematico (o la lentezza per portarlo a termine) sono date dalla difficile interazione tra questi e le loro sottocomponenti, continuamente riprogrammate dall'esecutivo centrale per poter supervisionare i processi di problem solving. Per la costruzione e lo sviluppo del calcolo più elevato, occorrono alcune capacità di base come il concetto di corrispondenza biunivoca, quello di ordinamento di un insieme, di maggioranza, di raddoppio e di dimezzamento, per mezzo delle quali ogni procedura si può ridurre ad una serie di operazioni più semplici. Queste funzioni vengono controllate e coordinate dal Sistema Attentivo Esecutivo che presiede tutte le attività di problem solving. I ragazzi che presentano deficit altamente specifici in una o più abilità matematiche di base vengono definiti discalculici e tra i loro tratti caratteristici vi sono l'incapacità di comprendere le numerosità, i principi delle operazioni e di elaborare strategie risolutive adatte ad ogni esercizio. Non tutti i ragazzi che presentano difficoltà in matematica sono discalculici: a tal proposito ho svolto una sperimentazione didattica in 10 classi di un I.T.I.S. , per cercare di capire se i concetti reputati consolidati alla scuola secondaria di 1° grado, lo sono realmente in quella di 2° e per mostrare le diverse tipologie di errori compiuti dai ragazzi clinici e non. I risultati sono stati largamente al di sotto delle aspettative, anche negli esercizi in cui è stato permesso l'uso della calcolatrice, lasciandomi presagire che gli errori commessi siano perlopiù di concetto piuttosto che di calcolo.

Study of the second hyperpolarizability of poly(3-alkylthiophenes) using the third-harmonic scattering technique

During the past years, the considerable need in the domain of communications for more potent photonic devices has focused the research activities into the nonlinear optical (NLO) materials which can be used for modern optical switches. In this regard, a lot of research activities are focused on the organic materials and conjugated polymers which offer more advantages compared to the inorganic ones. On this matter, poly(3-alkylthiophene) (P3AT), an organic conjugated polymer, can be investigated as potential optical material with in particular the focus on the NLO properties such as the first- and second-hyperpolarizability, β and γ respectively. The activities carried out at the Laboratory of Polymer Synthesis of the KU Leuven, during the master's thesis work, focused on the study of conjugated polymers in order to evaluate their NLO properties for the future purpose of applications in optical systems. In particular, three series of polythiophenes functionalized with an alkyl side chain in the 3-position were synthesized: poly(3-hexylthiophene) (P3HT), poly[3-(2-ethylhexyl)thiophene] (P3EHT) and random copolymer of the two regio-isomers of P3HT. They were made in order to study the influence of molar mass, branching and regio-irregularity on the γ-value. The Kumada catalyst transfer condensative polymerization (KCTCP) and the Pd(RuPhos)-protocol were used for the polymerizations in order to have control over the molar mass of the growing chain and consequently to obtain well-defined and reproducible materials. The P3AT derivatives obtained were characterized by gel permeation chromatography (GPC), spectroscopic techniques (1H-NMR, UV-Vis) and the γ-value was investigated using the third-harmonic scattering (THS) technique. In particular, the THS technique is useful to investigate the optical behavior of the series of polymers in solution.

Synthesis of enantiopure cyclopentanones by desymmetrization of allylic cyclobutanols

The interest in five-membered ring molecules derives from their important application in many different fields, such as pharmaceutical and agrochemical areas. A common strategy for their formation is four-membered ring expansion, which also allows to add molecular complexity and functional handles within one single operation starting from readily available starting materials. Organocatalysis can be exploited to promote the reaction and to obtain a good enantio- and diastereoselection. This technique involves the exclusive use of organic molecules as catalysts, without resorting to metals. The aim of this work is to obtain enantiopure cyclopentanones starting from achiral allylic cyclobutanols. The reaction consists in a ring expansion promoted by the addition of a halogen to the double bond of the substrate, with formation of a haliranium ion as intermediate, followed by a semipinacol rearrangement to afford the cyclopentanone. The reaction is catalysed by a chiral phosphoric acid that, besides accelerating the rate of the reaction, transmits a specific chirality thanks to its chiral structure, following the asymmetric catalysis principles. Starting from symmetric trans-allylic cyclobutanols, the whole reaction is a desymmetrization and leads to the formation of two new stereogenic centres: a mixture of diastereoisomers is obtained, each as couple of enantiomers; the ratio between the possible configurations is determined by the relative position that the chiral catalyst and the reagent occupy during the reaction. Since the reaction is already optimized, the original aim was to study the scope: first, the synthesis of a set of allylic cyclobutanols and their relative precursors, in order to have a wider range of substrates; then, the identification of the type of substrate that undergoes the expansion, with the study of enantio- and diastereoselectivity obtained in each case. Due to the Covid-19 emergency, most of the work was developed as a bibliographic study.

New methodologies in organocatalysis: from discovery to application and mechanistic

This PhD thesis deals with three different topics: i) sulfoxonium ylides, ii) donor-acceptor cyclopropanes, and iii) desymmetrization reactions. Catalysis, and in more detail organocatalysis, is the fil rouge linking the three subjects of study. The main focus treated during this doctorate period is the reactivity of sulfoxonium ylides, and in particular stabilized sulfoxonium ylides. Special attention has been dedicated to the behavior of these particular substrates under asymmetric and non-asymmetric reaction conditions. Moreover, also similarities and differences with the related, less stable, sulfonium ylides were fully analyzed, both experimentally and from a theoretical point of view. Two different reactions were developed in full. One conducted under acidic reaction conditions and the second one exploiting the asymmetric aminocatalysis. Subsequently, the reactivity of donor-acceptor cyclopropanes was studied. After different attempts in the development of a new catalytic methodology based on these substrates, a non-conventional reactivity conducted under phase transfer catalysis was discovered and optimized. In particular, a chemodivergent reaction depending on the reaction conditions was developed. Finally, during the period spent abroad, a preliminary study of a desymmetrization reaction was carried out. The studied reaction is based on an asymmetric elimination reaction conducted under asymmetric phosphoric acid catalysis. In summary, this PhD thesis shows the versatility of different organocatalytic methodologies when applied to different reactions and substrates.

Effetto della deplezione della lisina e della contemporanea somministrazione di integratori alimentari sulla qualità della carne di petto di pollo

Il presente lavoro di tesi ha avuto lo scopo di valutare l’effetto della deplezione dietetica della lisina, in concomitanza o meno della supplementazione di due diverse tipologie di integratori alimentari, sui principali tratti qualitativi e sulle proprietà tecnologiche della carne di petto di pollo. Pertanto, 1620 polli maschi sono stati allevati e suddivisi in 4 gruppi sperimentali in funzione dei trattamenti dietetici che prevedevano la deplezione del contenuto di lisina nella dieta con l’aggiunta o meno di 2 diversi tipi di integratori nella fase starter. Al termine della prova (50gg), 12 muscoli pettorali/gruppo sono stati destinati all’analisi del pH, colore, drip e cooking loss e sforzo di taglio. I risultati ottenuti hanno evidenziato che la deplezione della lisina insieme all’aggiunta dell’integratore 2 (contenente un precursore della creatina) ha determinato una significativa modificazione del colore della carne in termini di luminosità e indice di rosso (a*) e un aumento del cooking loss rispetto al gruppo di controllo. Tuttavia, le modificazioni ottenute sono di lieve entità e non determinano un eventuale peggioramento qualitativo della carne. Infatti, la deplezione della lisina non ha fatto rilevare alcuna modificazione significativa nei confronti dei parametri qualitativi e tecnologici presi in esame. Considerata la limitata disponibilità di studi presenti in letteratura riguardo la restrizione dietetica della quota di lisina, questo studio suggerisce come la sua deplezione nel primo periodo di vita dell’animale possa rappresentare una strategia efficace per ridurre i costi di alimentazione e migliorare la sostenibilità del sistema di produzione senza influenzare negativamente la qualità della carne. Infatti, è noto che la riduzione della concentrazione di alcuni componenti della dieta possa determinare una minore escrezione di azoto e fosforo, migliorando così la sostenibilità ambientale del sistema produttivo.

Evaluation Of The Effect Of Different Methods Of Microabrasion And Polishing On Surface Roughness Of Dental Enamel.

The microabrasion technique of enamel consists of selectively abrading the discolored areas or causing superficial structural changes in a selective way. In microabrasion technique, abrasive products associated with acids are used, and the evaluation of enamel roughness after this treatment, as well as surface polishing, is necessary. This in-vitro study evaluated the enamel roughness after microabrasion, followed by different polishing techniques. Roughness analyses were performed before microabrasion (L1), after microabrasion (L2), and after polishing (L3).Thus, 60 bovine incisive teeth divided into two groups were selected (n=30): G1- 37% phosphoric acid (37%) (Dentsply) and pumice; G2- hydrochloric acid (6.6%) associated with silicon carbide (Opalustre - Ultradent). Thereafter, the groups were divided into three sub-groups (n=10), according to the system of polishing: A - Fine and superfine granulation aluminum oxide discs (SofLex 3M); B - Diamond Paste (FGM) associated with felt discs (FGM); C - Silicone tips (Enhance - Dentsply). A PROC MIXED procedure was applied after data exploratory analysis, as well as the Tukey-Kramer test (5%). No statistical differences were found between G1 and G2 groups. L2 differed statistically from L1 and showed superior amounts of roughness. Differences in the amounts of post-polishing roughness for specific groups (1A, 2B, and 1C) arose, which demonstrated less roughness in L3 and differed statistically from L2 in the polishing system. All products increased enamel roughness, and the effectiveness of the polishing systems was dependent upon the abrasive used.

Direct And Non-destructive Proof Of Authenticity For The 2nd Generation Of Brazilian Real Banknotes Via Easy Ambient Sonic Spray Ionization Mass Spectrometry.

Using a desorption/ionization technique, easy ambient sonic-spray ionization coupled to mass spectrometry (EASI-MS), documents related to the 2nd generation of Brazilian Real currency (R$) were screened in the positive ion mode for authenticity based on chemical profiles obtained directly from the banknote surface. Characteristic profiles were observed for authentic, seized suspect counterfeit and counterfeited homemade banknotes from inkjet and laserjet printers. The chemicals in the authentic banknotes' surface were detected via a few minor sets of ions, namely from the plasticizers bis(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP), most likely related to the official offset printing process, and other common quaternary ammonium cations, presenting a similar chemical profile to 1st-generation R$. The seized suspect counterfeit banknotes, however, displayed abundant diagnostic ions in the m/z 400-800 range due to the presence of oligomers. High-accuracy FT-ICR MS analysis enabled molecular formula assignment for each ion. The ions were separated by 44 m/z, which enabled their characterization as Surfynol® 4XX (S4XX, XX=40, 65, and 85), wherein increasing XX values indicate increasing amounts of ethoxylation on a backbone of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (Surfynol® 104). Sodiated triethylene glycol monobutyl ether (TBG) of m/z 229 (C10H22O4Na) was also identified in the seized counterfeit banknotes via EASI(+) FT-ICR MS. Surfynol® and TBG are constituents of inks used for inkjet printing.

Auxin And Physical Constraint Exerted By The Perianth Promote Androgynophore Bending In Passiflora Mucronata L. (passifloraceae).

The androgynophore column, a distinctive floral feature in passion flowers, is strongly crooked or bent in many Passiflora species pollinated by bats. This is a floral feature that facilitates the adaptation to bat pollination. Crooking or bending of plant organs are generally caused by environmental stimulus (e.g. mechanical barriers) and might involve the differential distribution of auxin. Our aim was to study the role of the perianth organs and the effect of auxin in bending of the androgynophore of the bat-pollinated species Passiflora mucronata. Morpho-anatomical characterisation of the androgynophore, including measurements of curvature angles and cell sizes both at the dorsal (convex) and ventral (concave) sides of the androgynophore, was performed on control flowers, flowers from which perianth organs were partially removed and flowers treated either with auxin (2,4-dichlorophenoxyacetic acid; 2,4-D) or with an inhibitor of auxin polar transport (naphthylphthalamic acid; NPA). Asymmetric growth of the androgynophore column, leading to bending, occurs at a late stage of flower development. Removing the physical constraint exerted by perianth organs or treatment with NPA significantly reduced androgynophore bending. Additionally, the androgynophores of plants treated with 2,4-D were more curved when compared to controls. There was a larger cellular expansion at the dorsal side of the androgynophores of plants treated with 2,4-D and in both sides of the androgynophores of plants treated with NPA. This study suggests that the physical constraint exerted by perianth and auxin redistribution promotes androgynophore bending in P. mucronata and might be related to the evolution of chiropterophily in the genus Passiflora.

Tissue culture of Cecropia glaziovii Sneth (urticaceae): vegetative micropropagation and plant regeneration from callus

Cecropia glaziovii is a tree with used in Brazilian popular medicine. Methods allowing the clonal propagation of this species are of great interest for superior genotype multiplication and perpetuation. For this reason, we examined the effect of different culture media and different types of explants on adventitious shoot regeneration from callus and buds of C. glaziovii. Leaves, petioles and stipules obtained from aseptically grown seedlings or from pre-sterilized plants were used to initiate cultures. Adventitious shoot regeneration was achieved when apical and axillary buds were inoculated on gelled Murashige & Skoog (MS) medium supplemented with 6-benzylaminopurine alone (BAP) (1.0, 5.0 or 10.0 mg L-1) or combined with -naphthalene acetic acid (NAA) (1.0 or 2.0 mg L-1), after 40 days of culture. Best callus production was obtained after 30 days of petioles' culture on gelled MS medium with 2,4 dichlorophenoxyacetic acid (2,4-D) (5.0 mg L-1) combined with BAP (1.0 mg L-1). Successful shoot regeneration from callus was achieved when MS medium supplemented with zeatin (ZEA) (0.1 mg L-1) alone or combined with 2,4-D (1.0 or 5.0 mg L-1) was inoculated with friable callus obtained from petioles. All shoots were rooted by inoculation on MS medium supplemented with indole-3-acetic acid (IAA) (1.0 mg L-1). Rooted plants transferred to potting soil were successfully established. All in vitro regenerated plantlets showed to be normal, without morphological variations, being also identical to the source plant. Our study has shown that C. glaziovii can be propagated by tissue culture methods, allowing large scale multiplication of superior plants for pharmacological purposes.