Occurrence of severe dengue in Rio de Janeiro: an ecological study

Introduction This study aimed to analyze the relationship between the incidence of severe dengue during the 2008 epidemic in Rio de Janeiro, Brazil, and socioeconomic indicators, as well as indicators of health service availability and previous circulation of the dengue virus serotype-3 (DENV-3). Methods In this ecological study, the units of analysis were the districts of Rio de Janeiro. The data were incorporated into generalized linear models, and the incidence of severe dengue in each district was the outcome variable. Results The districts with more cases of dengue fever in the 2001 epidemic and a higher percentage of residents who declared their skin color or race as black had higher incidence rates of severe dengue in the 2008 epidemic [incidence rate ratio (IRR)= 1.21; 95% confidence interval (95%CI)= 1.05-1.40 and IRR= 1.34; 95%CI= 1.16-1.54, respectively]. In contrast, the districts with Family Health Strategy (FHS) clinics were more likely to have lower incidence rates of severe dengue in the 2008 epidemic (IRR= 0.81; 95%CI= 0.70-0.93). Conclusions At the ecological level, our findings suggest the persistence of health inequalities in this region of Brazil that are possibly due to greater social vulnerability among the self-declared black population. Additionally, the protective effect of FHS clinics may be due to the ease of access to other levels of care in the health system or to a reduced vulnerability to dengue transmission that is afforded by local practices to promote health.

Dengue in Brazil and Colombia: a study of knowledge, attitudes, and practices

Introduction This study was conducted in Brazil and Colombia,where dengue is endemic and vector control programs use chemical insecticides. Methods We identified knowledge, attitudes, and practices about dengue and determined the infestation levels of Aedes aegypti in one Brazilian and four Colombian communities. Results The surveys show knowledge of the vector, but little knowledge about diagnosis, prognosis, and treatment. Vector infestation indices show Brazil to have good relative control, while Colombia presents a high transmission risk. Conclusions Given the multidimensionality of dengue control, vertical control strategies are inadequate because they deny contextualized methods, alternative solutions, and local empowerment.

Natural transovarial transmission of dengue virus 4 in Aedes aegypti from Cuiabá, State of Mato Grosso, Brazil

INTRODUCTION: Dengue is the most prevalent arboviral disease in tropical areas. In Mato Grosso, outbreaks are reported every year, but studies on dengue in this state are scarce. METHODS: Natural transovarial infection of Aedes aegypti by a flavivirus was investigated in the Jardim Industriário neighborhood of Cuiabá, Mato Grosso. Eggs were collected with ovitraps during the dry, intermediate, and rainy seasons of 2012. After the eggs hatched and the larvae developed to adulthood, mosquitoes (n = 758) were identified and allocated to pools of 1-10 specimens according to the collection location, sex, and climatic period. After RNA extraction, multiplex semi-nested RT-PCR was performed to detect the four dengue virus (DENV) serotypes, yellow fever virus, West Nile virus and Saint Louis encephalitis virus. RESULTS: DENV-4 was the only flavivirus detected, and it was found in 8/50 pools (16.0%). Three of the positive pools contained females, and five contained males. Their nucleotide sequences presented 96-100% similarity with DENV-4 genotype II strains from Manaus, Amazonas. The minimum infection rate was 10.5 per 1000 specimens, and the maximum likelihood estimator of the infection rate was 11.6 (95% confidence interval: 4.8; 23.3). CONCLUSIONS: This study provides the first evidence of natural transovarial infection by DENV-4 in Ae. Aegypti in Mato Grosso, suggesting that this type of infection might serve as a mechanism of virus maintenance during interepidemic periods in Cuiabá, a city where dengue epidemics are reported every year. These results emphasize the need for efficient vector population control measures to prevent arbovirus outbreaks in the state.

Relação entre as variáveis sociais, económicas e ambientais com o padrão da distribuição espaço-temporal dos casos de Dengue por munícipio no Brasil : de 2008 até 2012, utilizando o SOM

Atualmente, um dos principais desafios que afeta a saúde pública no Brasil é a crescente evolução no número de casos e epidemias provocados pelo vírus da dengue. Não existem estudos suficientes que consigam elucidar quais fatores contribuem para a evolução das epidemias de Dengue. Fatores como condições sanitárias, localização geográfica, investimentos financeiros em infraestrutura e qualidade de vida podem estar relacionados com a incidência de Dengue. Além disso, outra questão que merece um maior destaque é o estudo para se identificar o grau de impacto das variáveis determinantes da dengue e se existe um padrão que está correlacionado com a taxa de incidência. Desta forma, este trabalho tem como objetivo principal a correlação da taxa de incidência da dengue na população de cada município brasileiro, utilizando dados relativos aos aspectos sociais, econômicos, demográficos e ambientais. Outra contribuição relevante do trabalho, foi a análise dos padrões de distribuição espacial da taxa de incidência de Dengue e sua relação com os padrões encontrados utilizando as variáveis socioeconômicas e ambientais, sobretudo analisando a evolução temporal no período de 2008 até 2012. Para essa análises, utilizou-se o Sistema de Informação Geográfica (SIG) aliado com a mineração de dados, através da metodologia de rede neural mais especificamente o mapa auto organizável de Kohonen ou self-organizing maps (SOM). Tal metodologia foi empregada para a identificação de padrão de agrupamentos dessas variáveis e sua relação com as classes de incidência de dengue no Brasil (Alta, Média e Baixa). Assim, este projeto contribui de forma significativa para uma melhor compreensão dos fatores que estão associados à ocorrência de Dengue, e como essa doença está correlacionada com fatores como: meio ambiente, infraestrutura e localização no espaço geográfico.

Trends and factors associated with dengue mortality and fatality in Brazil

AbstractINTRODUCTION:Studies that generate information that may reduce the dengue death risk are essential. This study analyzed time trends and risk factors for dengue mortality and fatality in Brazil from 2001 to 2011.METHODS:Time trends for dengue mortality and fatality rates were analyzed using simple linear regression. Associations between the dengue mortality and the case fatality rates and socioeconomic, demographic, and health care indicators at the municipality level were analyzed using negative binomial regression.RESULTS:The dengue hemorrhagic fever case fatality rate increased in Brazil from 2001 to 2011 (β=0.67; p=0.036), in patients aged 0-14 years (β=0.48; p=0.030) and in those aged ≥15 years (β=1.1; p<0.01). Factors associated with the dengue case fatality rate were the average income per capita (MRR=0.99; p=0.038) and the number of basic health units per population (MRR=0.89; p<0.001). Mortality rates increased from 2001 to 2011 (β=0.350; p=0.002).Factors associated with mortality were inequality (RR=1.02; p=0.001) high income per capita (MRR=0.99; p=0.005), and higher proportions of populations living in urban areas (MRR=1.01; p<0.001).CONCLUSIONS:The increases in the dengue mortality and case fatality rates and the associated socioeconomic and health care factors, suggest the need for structural and intersectoral investments to improve living conditions and to sustainably reduce these outcomes.

Evaluation of the World Health Organization 2009 classification of dengue severity in autopsied individuals, during the epidemics of 2011 and 2012 in Brazil

Abstract: INTRODUCTION: The dengue classification proposed by the World Health Organization (WHO) in 2009 is considered more sensitive than the classification proposed by the WHO in 1997. However, no study has assessed the ability of the WHO 2009 classification to identify dengue deaths among autopsied individuals suspected of having dengue. In the present study, we evaluated the ability of the WHO 2009 classification to identify dengue deaths among autopsied individuals suspected of having dengue in Northeast Brazil, where the disease is endemic. METHODS: This retrospective study included 121 autopsied individuals suspected of having dengue in Northeast Brazil during the epidemics of 2011 and 2012. All the autopsied individuals included in this study were confirmed to have dengue based on the findings of laboratory examinations. RESULTS: The median age of the autopsied individuals was 34 years (range, 1 month to 93 years), and 54.5% of the individuals were males. According to the WHO 1997 classification, 9.1% (11/121) of the cases were classified as dengue hemorrhagic fever (DHF) and 3.3% (4/121) as dengue shock syndrome. The remaining 87.6% (106/121) of the cases were classified as dengue with complications. According to the 2009 classification, 100% (121/121) of the cases were classified as severe dengue. The absence of plasma leakage (58.5%) and platelet counts <100,000/mm3 (47.2%) were the most frequent reasons for the inability to classify cases as DHF. CONCLUSIONS: The WHO 2009 classification is more sensitive than the WHO 1997 classification for identifying dengue deaths among autopsied individuals suspected of having dengue.

Severe dengue in the early postoperative period after kidney transplantation: two case reports from Hospital Geral de Fortaleza

Abstract: Dengue is an arbovirosis that ranges from an asymptomatic presentation to a more severe disease, which is characterized by a vascular leakage syndrome where abdominal pain is a major symptom. Transplant recipients are immunosuppressed and are less likely to develop a severe form of the disease because of a reduction in immune-mediated responses that trigger plasma extravasation events. Herein, we report two cases of severe dengue in the early postoperative period of two kidney transplant recipients. Considering the severity of the cases, we emphasize the importance of dengue screening immediately before transplantation in areas endemic for the disease.

Infection of the central nervous system with dengue virus 3 genotype I causing neurological manifestations in Brazil

Abstract: A case of dengue virus 3 (DENV-3) genotype I infection with neurological manifestations occurred in Belo Horizonte, Minas Gerais in October 2012. The serotype was detected by PCR, and the genotype was assessed by sequencing and phylogenetic analysis of the C-prM region. The virus causing neurological manifestations clustered with other sequences of DENV-3 genotype I. Because neurological manifestations of DENV are possibly misdiagnosed in Brazil, this study serves as an alert of the importance of DENV diagnoses in CNS infections.

Knowledge and practices related to dengue and its vector: a community-based study from Southeast Brazil

Abstract INTRODUCTION: This study investigated the knowledge of users of primary healthcare services living in Ribeirão Preto, Brazil, about dengue and its vector. METHODS: A cross-sectional survey of 605 people was conducted following a major dengue outbreak in 2013. RESULTS: Participants with higher levels of education were more likely to identify correctly the vector of the disease. CONCLUSIONS: The results emphasize the relevance of health education programs, the continuous promotion of educational campaigns in the media, the role of the television as a source of information, and the importance of motivating the population to control the vector.

Modeling and optimization of extracellular polysaccharides production by Enterobacter A47

Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.

Aplicação do Building Information Modeling na gestão de projetos de construção

Dissertação de mestrado em Construção e Reabilitação Sustentáveis

Modeling microbes: New methods for integrated metabolic and regulatory network reconstruction

PhD Thesis in Bioengineering

A relational algebra approach to ETL modeling

The MAP-i Doctoral Programme in Informatics, of the Universities of Minho, Aveiro and Porto

High strain rate constitutive modeling forhistorical structures subjected to blast loading

Doctoral Thesis Civil Engineering

Fused deposition modeling with polypropylene

This paper addresses the potential of polypropylene (PP) as a candidate for fused deposition modeling (FDM)-based 3D printing technique. The entire filament production chain is evaluated, starting with the PP pellets, filament production by extrusion and test samples printing. This strategy enables a true comparison between parts printed with parts manufactured by compression molding, using the same grade of raw material. Printed samples were mechanically characterized and the influence of filament orientation, layer thickness, infill degree and material was assessed. Regarding the latter, two grades of PP were evaluated: a glass-fiber reinforced and a neat, non-reinforced, one. The results showed the potential of the FDM to compete with conventional techniques, especially for the production of small series of parts/components; also, it was showed that this technique allows the production of parts with adequate mechanical performance and, therefore, does not need to be restricted to the production of mockups and prototypes.