Efeito da adição de fibras da palma do licuri (syagrus coronata) no comportamento físico e mecânico de compósitos de matriz cimentícia

This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research

Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test

Influência da substituição de areia natural por pó de pedra no comportamento mecânico, microestrutural e eletroquímico de concretos

The construction industry is one of the largest consumers of natural raw materials, and concrete is considered today the most used material wide. This accentuated consumption of natural resources has generated concern with the preservation of the environment, and has motivated various studies related to the use of resid ues, which can partially or entirely substitute, with satisfactory performance, some materials such as the aggregate, and in so doing, decrease the impact on the environment caused by the produced residues. Research has been done to better understand and improve the microstructure of concrete, as well as to understand the mechanism of corrosion in reinforced steel. In this context, this work was developed aiming at discovering the influence of the substitution of natural sand by artificial sand, with rega rd to mechanical resistance, microstructure, and durability. To obtain the electrochemical parameters, an adaptation was made to the galvanostatic electrochemical method to study the corrosion in reinforced steel. Concretes of categories 20 MPa and 40 MPa were produced, containing natural sand, and concretes of the same categories were produced with artificial sand substituting the natural sand, and with the addition of sodium nitrate and sodium chloride. Due to the use of rock dust reject (artificial sand), an evaluation was made of its environmental risk. The results indicate that the concretes of category 20 MPa present a better performance than the concrete made with natural sand, thus making it a viable substitute. For the category 40 MPa, the better performance is from the concrete containing natural sand. The adaptation of the galvanostatic electrochemical technique to the study of the corrosion of reinforced steel within concrete proved to be valid for obtaining electrochemical parameters with a high degree of reliability, considering the number of degrees of freedom

Desenvolvimento de um sistema Inteligente para a análise de cartas dinamométricas no método de elevação por bombeio mecânico

The artificial lifting of oil is needed when the pressure of the reservoir is not high enough so that the fluid contained in it can reach the surface spontaneously. Thus the increase in energy supplies artificial or additional fluid integral to the well to come to the surface. The rod pump is the artificial lift method most used in the world and the dynamometer card (surface and down-hole) is the best tool for the analysis of a well equipped with such method. A computational method using Artificial Neural Networks MLP was and developed using pre-established patterns, based on its geometry, the downhole card are used for training the network and then the network provides the knowledge for classification of new cards, allows the fails diagnose in the system and operation conditions of the lifting system. These routines could be integrated to a supervisory system that collects the cards to be analyzed

Influência da adição de gres porcelanato no comportamento mecânico e microestrutural em pastas de cimento portland para cimentação de poços de petróleo

Cementation operation consists in an extremely important work for the phases of perforation and completion of oil wells, causing a great impact on the well productivity. Several problems can occur with the cement during the primary cementation, as well as throughout the productive period. The corrective operations are frequent, but they are expensive and demands production time. Besides the direct cost, prejudices from the interruption of oil and gas production till the implementation of a corrective operation must be also taken into account. The purpose of this work is the development of an alternative cement paste constituted of Portland cement and porcelainized stoneware residue produced by ceramic industry in order to achieve characteristics as low permeability, high tenacity, and high mechanical resistance, capable of supporting various operations as production or oil wells recuperation. Four different concentration measures of hydrated paste were evaluated: a reference paste, and three additional ones with ceramic residue in concentrations of the order of 10%, 20% and 30% in relation to cement dough. High resistance and low permeability were found in high concentration of residues, as well as it was proved the pozolanic reactivity of the residue in relation to Portland cement, which was characterized through x-ray and thermogravimetry assays. It was evident the decrease of calcium hydroxide content, once it was substituted by formation of new hydrated products as it was added ceramic residue

Simulador de dano à formação, aplicado ao Projeto e à execução da perfuração de poços de petróleo

With the high oil price variability, the petroleum and the reservoir engineers are usually face to face on how they can evaluate the well performance and productivity. They can improve high productivity from the well construction to the secondary recoveries, but they have never tried a measurement in the drilling operations about the lower productivity index. As a rule, frequently the drilling operations hear from the reservoir engineering and geology that, if there is a formation damage, probably some drilling operations practices were not done properly or the good practice in petroleum engineering or mud engineering were not observed. The study in this working search is an attempt of how to measure a formation damage just from the project drilling to the drilling operations, with datum from the fields in Brazilian northeast and putting into practice a Simulator developed from the modeling on the theory offered by different experts and sources in formation damage

Modelagem e simulação de um sistema de bombeio mecânico em poços direcionais utilizando parâmetros concentrados

This work aims presenting the development of a model and computer simulation of a sucker rod pumping system. This system take into account the well geometry, the flow through the tubing, the dynamic behavior of the rod string and the use of a induction motor model. The rod string were modeled using concentrated parameters, allowing the use of ordinary differential equations systems to simulate it s behavior

Comportamento mecânico de um agregado reciclado a partir de resíduos de construção e demolição submetido a carregamentos cíclicos

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Programa de Pós-Graduação em Geotecnia, 2016.

Análise ao comportamento mecânico de estruturas de suporte produzidas por fdm

A produção aditiva tem vindo a ganhar cada vez mais importância no contexto atual pois, através destes processos, é possível criar protótipos de forma rápida que permitem de forma eficaz a visualização do modelo mas também, nalguns casos, a verificação da funcionalidade do mesmo. Este tipo de fabrico está em ascensão e estão constantemente a serem exploradas novas aplicações. Na produção aditiva, o material de suporte gerado para suportar a construção tem elevada importância no tempo e custo do processo. Neste contexto, torna-se cada vez mais evidente que é necessário entender o comportamento mecânico desta estrutura de modo a tornar o processo mais rápido e com menores custos sem comprometer a resistência das peças produzidas por este. O processo de FDM é um dos processos de produção aditiva que constrói modelos camada a camada a partir de ficheiros CAD que são tratados no software da máquina por forma a dividir o modelo em várias camadas finas que geram várias secções com as geometrias correspondentes. A construção do modelo físico é feita através da extrusão e deposição de polímeros consoante a secção pretendida. O principal objetivo deste trabalho é a caracterização mecânica do material de suporte gerado aquando a construção da peça final pretendida. Foi com este objetivo que foram criados modelos de teste através do processo de FDM para serem submetidos a ensaios de compressão de modo a entender de que forma o material de suporte influencia na resistência final do modelo. Da análise dos dados obtidos é possível concluir que o material de suporte não aumenta a resistência das peças produzidas.

Reavaliação do nível de dano de Spodoptera frugiperda (J. E. SMITH, 1797) (Lepidoptera: Noctuidae) em milho convencional.

2015

Danos e nível de dano econômico do percevejo barriga verde na cultura do milho.

2015

Lise celular mecânico por irradiação ultrassônica e cultivo de microalgas.

2016

Noções fundamentais sobre o dano existencial

ResumenEste artículo examina el concepto de daño existencial y sus especies. Además, describe los acontecimientos que pueden resultar en daño existencial. Por último, examinamos los precedentes judiciales en los que hemos identificado la presencia de daño existencial.ResumoEste artigo traz a lume o conceito e as espécies de dano existencial. Além disso, examina acontecimentos que podem redundar em dano existencial. E, por último, versa acerca de casos concretos judiciais nos quais se identificou a presença do dano existencial.Palavras-chaves: dano existencial, dano ao projeto de vida, dano à vida de relações, noções basilares, precedentes judiciais.AbstractThis article brings to light the concept and modalities of existential damage. It also examines events that can result in existential damage. And, finally, analyzes judicial cases in which it was identified the presence of existential damage.Keywords: existential damage; damage to the project of life; damage to the relationship life; basic notions; judicial precedents.

Prática em saúde baseada em evidências: análise de dano

Esta videoaula (aula 8) aborda conceitos relativos à avaliação de impacto de dano de determinada intervenção e ressalta considerações à cerca de estudos que avaliam dano e a análise crítica desses estudos.

Quality Of Life On Arterial Hypertension: Validity Of Known Groups Of Minichal.

Introductions: In the care of hypertension, it is important that health professionals possess available tools that allow evaluating the impairment of the health-related quality of life, according to the severity of hypertension and the risk for cardiovascular events. Among the instruments developed for the assessment of health-related quality of life, there is the Mini-Cuestionario of Calidad de Vida en la Hipertensión Arterial (MINICHAL) recently adapted to the Brazilian culture. Objective: To estimate the validity of known groups of the Brazilian version of the MINICHAL regarding the classification of risk for cardiovascular events, symptoms, severity of dyspnea and target-organ damage. Methods: Data of 200 hypertensive outpatients concerning sociodemographic and clinical information and health-related quality of life were gathered by consulting the medical charts and the application of the Brazilian version of MINICHAL. The Mann-Whitney test was used to compare health-related quality of life in relation to symptoms and target-organ damage. The Kruskal-Wallis test and ANOVA with ranks transformation were used to compare health-related quality of life in relation to the classification of risk for cardiovascular events and intensity of dyspnea, respectively. Results: The MINICHAL was able to discriminate health-related quality of life in relation to symptoms and kidney damage, but did not discriminate health-related quality of life in relation to the classification of risk for cardiovascular events. Conclusion: The Brazilian version of the MINICHAL is a questionnaire capable of discriminating differences on the health‑related quality of life regarding dyspnea, chest pain, palpitation, lipothymy, cephalea and renal damage.Fundamento: No cuidado ao hipertenso, é importante que o profissional de saúde disponha de ferramentas que possibilitem avaliar o comprometimento da qualidade de vida relacionada à saúde, de acordo com a gravidade da hipertensão e o risco para eventos cardiovasculares. Dentre os instrumentos criados para avaliação da qualidade de vida relacionada à saúde, destaca-se o Mini-Cuestionario de Calidad de Vida en la Hipertensión Arterial (MINICHAL), recentemente adaptado para a cultura brasileira. Objetivo: Estimar a validade de grupos conhecidos da versão brasileira do MINICHAL em relação à classificação de risco para eventos cardiovasculares, sintomas, intensidade da dispneia e lesões de órgãos-alvo. Métodos: Foram investigados 200 hipertensos em seguimento ambulatorial, cujos dados sociodemográficos, clínicos e de qualidade de vida relacionada à saúde foram obtidos por meio de consulta ao prontuário e da aplicação da versão brasileira do MINICHAL. O teste de Mann-Whitney foi utilizado para comparar qualidade de vida relacionada à saúde em relação aos sintomas e às lesões de órgãos-alvo. Teste de Kruskal-Wallis e ANOVA com transformação nos ranks foram empregados para comparar qualidade de vida relacionada à saúde em relação à classificação de risco para eventos cardiovasculares e intensidade da dispneia, respectivamente. Resultados: O MINICHAL discriminou qualidade de vida relacionada à saúde em relação aos sintomas e dano renal (lesões de órgãos-alvo), porém não discriminou qualidade de vida relacionada à saúde em relação à classificação de risco para eventos cardiovasculares. Conclusão: A versão brasileira do MINICHAL é um instrumento capaz de discriminar diferenças na qualidade de vida relacionada à saúde em relação aos sintomas de dispneia, precordialgia, palpitação, lipotímia, cefaleia e presença de dano renal.