Domestic architecture and social differences in North-Eastern Iberia during the iron age (c.525-200 BC)

This paper is concerned with the organization of societies in north-eastern Iberia (present-day Catalonia) during the Iron Age, using data provided by domestic architecture and settlement organization. I offer an analysis of the social differences detected in the dwellings based on a sample of houses excavated at different types of settlement. Although many Iberian houses had simple layouts and small surface areas, some larger dwellings at the main sites are distinguished by the shape of their ground plans, their surface areas, architectural features, and central locations; these houses are believed to be the residences of the Iberian elite. Such dwellings are not found at all sites and the data suggest that there was a relationship between the category of the settlement (or its function) and the types of dwelling in it.

Dictionnaire d'architecture civile et hydraulique et des arts qui en dépendent : comme la maçonnerie, la charpenterie, la menuiserie... ([Reprod.]) / par Augustin Charles d'Aviler...

Collection : Archives de la linguistique française ; 18

Des principes de l'architecture, de la sculpture, de la peinture, et des autres arts qui en dépendent : avec un Dictionnaire des termes propres à chacun de ces arts (Ed. sur microfiche) / [Félibien]

Collection : Archives de la linguistique française ; 151

The micro-architecture estimation by TBS discriminate women with and without osteoporotic fracture independently of age, BMI and BMD: The Osteo-Mobile Vaud cohort study.

Introduction: « Osteo-Mobile Vaud » is a mobile osteoporosis (OP) screening program. The women > 60 years living in the region Vaud will be offered OP screening with new equipment installed in a bus. The main goal is to evaluate the fracture risk with the combination of clinical risk factors (CRF) and informations extracted by a single DXA: bone mineral density (BMD), vertebral fracture assessment (VFA), and micro-architecture (MA) evaluation. MA is yet evaluable in daily practice by the Trabecular Bone Score (TBS) measure. TBS is a novel grey-level texture measurement reflecting bone MA based on the use of experimental variograms of 2D projection images. TBS is very simple to obtain, by reanalyzing a lumbar DXA-scan. TBS has proven to have diagnosis and prognosis value, partially independent of CRF and BMD. A 55-years follow- up is planned. Method: The Osteo-Mobile Vaud cohort (1500 women, > 60 years, living in the region Vaud) started in July 2010. CRF for OP, lumbar spine and hip BMD, VFA by DXA and MA evaluation by TBS are recorded. Preliminary results are reported. Results: In July 31th, we evaluated 510 women: mean age 67 years, BMI 26 kg/m². 72 women had one or more fragility fractures, 39 had vertebral fracture (VFx) grade 2/3. TBS decreases with age (-0.005 / year, p<0.001), and with BMI (-0.011 per kg/m², p<0.001). Correlation between BMD and site matched TBS is low (r=0.4, p<0.001). For the lowest T-score BMD, odds ratio (OR, 95% CI) for VFx grade 2/3 and clinical OP Fx are 1.8 (1.1-2.9) and 2.3 (1.5-3.4). For TBS, age-, BMI- and BMD adjusted ORs (per SD decrease) for VFx grade 2/3 and clinical OP Fx are 1.9 (1.2-3.0) and 1.8 (1.2-2.7). The TBS added value was independent of lumbar spine BMD or the lowest T-score (femoral neck, total hip or lumbar spine). Conclusion: As in the already published studies, these preliminary results confirm the partial independence between BMD and TBS. More importantly, a combination of TBS and BMD may increase significantly the identification of women with prevalent OP Fx. For the first time we are able to have complementary information about fracture (VFA), density (BMD), and micro-architecture (TBS) from a simple, low ionizing radiation and cheap device: DXA. The value of such informations in a screening program will be evaluated.

Computational Analysis and Optimization of Real Gas Flow In Small Centrifugal Compressors

Small centrifugal compressors are more and more widely used in many industrialsystems because of their higher efficiency and better off-design performance comparing to piston and scroll compressors as while as higher work coefficient perstage than in axial compressors. Higher efficiency is always the aim of the designer of compressors. In the present work, the influence of four partsof a small centrifugal compressor that compresses heavy molecular weight real gas has been investigated in order to achieve higher efficiency. Two parts concern the impeller: tip clearance and the circumferential position of the splitter blade. The other two parts concern the diffuser: the pinch shape and vane shape. Computational fluid dynamics is applied in this study. The Reynolds averaged Navier-Stokes flow solver Finflo is used. The quasi-steady approach is utilized. Chien's k-e turbulence model is used to model the turbulence. A new practical real gas model is presented in this study. The real gas model is easily generated, accuracy controllable and fairly fast. The numerical results and measurements show good agreement. The influence of tip clearance on the performance of a small compressor is obvious. The pressure ratio and efficiency are decreased as the size of tip clearance is increased, while the total enthalpy rise keeps almost constant. The decrement of the pressure ratio and efficiency is larger at higher mass flow rates and smaller at lower mass flow rates. The flow angles at the inlet and outlet of the impeller are increased as the size of tip clearance is increased. The results of the detailed flow field show that leakingflow is the main reason for the performance drop. The secondary flow region becomes larger as the size of tip clearance is increased and the area of the main flow is compressed. The flow uniformity is then decreased. A detailed study shows that the leaking flow rate is higher near the exit of the impeller than that near the inlet of the impeller. Based on this phenomenon, a new partiallyshrouded impeller is used. The impeller is shrouded near the exit of the impeller. The results show that the flow field near the exit of the impeller is greatly changed by the partially shrouded impeller, and better performance is achievedthan with the unshrouded impeller. The loading distribution on the impeller blade and the flow fields in the impeller is changed by moving the splitter of the impeller in circumferential direction. Moving the splitter slightly to the suction side of the long blade can improve the performance of the compressor. The total enthalpy rise is reduced if only the leading edge of the splitter ismoved to the suction side of the long blade. The performance of the compressor is decreased if the blade is bended from the radius direction at the leading edge of the splitter. The total pressure rise and the enthalpy rise of thecompressor are increased if pinch is used at the diffuser inlet. Among the fivedifferent pinch shape configurations, at design and lower mass flow rates the efficiency of a straight line pinch is the highest, while at higher mass flow rate, the efficiency of a concave pinch is the highest. The sharp corner of the pinch is the main reason for the decrease of efficiency and should be avoided. The variation of the flow angles entering the diffuser in spanwise direction is decreased if pinch is applied. A three-dimensional low solidity twisted vaned diffuser is designed to match the flow angles entering the diffuser. The numerical results show that the pressure recovery in the twisted diffuser is higher than in a conventional low solidity vaned diffuser, which also leads to higher efficiency of the twisted diffuser. Investigation of the detailed flow fields shows that the separation at lower mass flow rate in the twisted diffuser is later than in the conventional low solidity vaned diffuser, which leads to a possible wider flow range of the twisted diffuser.

Information architecture for the semantic web

L'objectiu és desenvolupar i avaluar una sèrie de components de l'arquitectura de la informació per a la web semàntica. Aquest components són genèrics i permeten als usuaris explorar conjunts de dades semàntiques sense necessitat de conèixer l'estructura ni tenir coneixements tècnics. S'ha desenvolupat seguint una metodologia de disseny centrat en l'usuari

Espaces et sociétés : revue critique internationale de l'aménagement, de l'architecture et de l'urbanisation / dir. publ. Serge Jonas

1977/03 (N20)-1977/06 (N21).

Espaces et sociétés : revue critique internationale de l'aménagement, de l'architecture et de l'urbanisation / dir. publ. Serge Jonas

1998 (N95,T1).

Espaces et sociétés : revue critique internationale de l'aménagement, de l'architecture et de l'urbanisation / dir. publ. Serge Jonas

1976/03 (N17)-1976/06 (N18).

Espaces et sociétés : revue critique internationale de l'aménagement, de l'architecture et de l'urbanisation / dir. publ. Serge Jonas

1994 (N79).

Espaces et sociétés : revue critique internationale de l'aménagement, de l'architecture et de l'urbanisation / dir. publ. Serge Jonas

2001 (N105)- (N106).

Espaces et sociétés : revue critique internationale de l'aménagement, de l'architecture et de l'urbanisation / dir. publ. Serge Jonas

1975/11 (N16).