Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in Design

N170 Asymmetry as an Index of Inferior Occipital Dysfunction in Patients With Symptomatic Occipital Lobe Epilepsy

Objective: Localizing epileptic foci in posterior brain epilepsy remains a difficult exercise in surgery for epilepsy evaluation. Neither clinical manifestations, neurological, EEG nor neuropsychological evaluations provide strong information about the area of onset, and fast spread of paroxysms often produces mixed features of occipital, temporal and parietal symptoms. We investigated the usefulness of the N170 event-related potential to map epileptic activity in these patients. Methods: A group of seven patients with symptomatic posterior cortex epilepsy were submitted to a high-resolution EEG (78 electrodes), with recordings of interictal spikes and face-evoked N170. Generators of spikes and N170 were localized by source analysis. Range of normal N170 asymmetry was determined in 30 healthy volunteers. Results: In 3 out of 7 patients the N170 inter-hemispheric asymmetry was outside control values. Those were the patients whose spike sources were nearest (within 3 cm) to the fusiform gyrus, while foci further away did not affect the N170 ratio. Conclusions: N170 event-related potential provides useful information about focal cortical dysfunction produced by epileptic foci located in the close neighborhood of the fusiform gyrus, but are unaffected by foci further away. Significance: The N170 evoked by faces can improve the epileptic foci localization in posterior brain epilepsy.

Perinatal Outcome and Change in Body Mass Index in Mothers of Dichorionic Twins: a Longitudinal Cohort Study

We used a prospective cohort to analyze the effect of change in BMI rather than change in weight, in mothers carrying dichorionic twins from a population that did not receive any dietary intervention. A total of 269 mothers (150 nulliparas and 119 multiparas) were evaluated. The average change (%) from the pre-gravid BMI was 7.2+/-6.1, 17.4+/-8.2, and 28.7+/-10.8, at 12-14, 22-25, and 30-34 weeks, respectively, without difference between nulliparas and multiparas. The comparison between maternities below or above the average change from the pregravid BMI failed to demonstrate an advantage (in terms of total twin birthweight and gestational age) of an above average change from the pregravid BMI, even when the lower versus upper quartiles were compared. Our observations reached different conclusions regarding the recommended universal dietary intervention in twin gestations. A cautious approach is advocated towards seemingly harmless excess weight gain, as normal weight women may turn overweight, or even obese, by the end of pregnancy, and be exposed to the untoward effects of obesity on future health and body image.

Proposta de modelo para obtenção do Work Index das rochas

Este trabalho pretende estabelecer uma relação entre o Work Index e algumas propriedades das rochas. Através da pesquisa bibliográfica foram identificadas varias propriedades com possível influência no valor do Work Index, das quais foram seleccionadas a massa volúmica aparente, a resistência à carga pontual, a composição química, a composição mineralógica e a abrasividade. Adicionalmente a porosidade aberta e resistência à compressão também foram analisadas. Assim foram analisadas 10 amostras de rocha, quatro de granitos, uma de quartzodiorito, uma de ardósia, uma de serpentinito, uma de calcário, uma de mármore e uma de sienito nefelínico, sobre as quais já eram conhecidos os valores de cinco das propriedades referidas previamente, tendo sido determinados os valores das ainda desconhecidas, resistência à carga pontual e a abrasividade que está representada através do resultado do ensaio capon. Devido à dificuldade de execução do ensaio de determinação do Work Index de Bond foram recolhidos dados bibliográficos de valores do Work Index para as amostras de rocha seleccionadas e adoptado o valor médio para cada uma. Os dados obtidos foram tratados estatisticamente através do método de análise de componentes principais assim como através de regressões lineares simples e múltiplas. A análise de componentes principais permitiu identificar várias propriedades da rocha com possível influência sobre o Work Index de entre as analisadas. Foi possível estabelecer uma relação entre o Work Index e quatro das propriedades seleccionadas, designadamente a porosidade aberta, a resistência à compressão, a resistência à carga pontual e a abrasividade.

Spatial and temporal analysis of recent drought using vegetation temperature condition index: case of Somali regional state of Ethiopia

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Valorização da Borra de Café: Otimização da Produção de Biodiesel por Catálise Enzimática

O decréscimo das reservas de petróleo e as consequências ambientais resultantes do recurso a combustíveis fósseis nos motores a diesel têm levado à procura de combustíveis alternativos. Esta pesquisa alicerçada nas fontes de energia renovável tornou-se essencial, face à crescente procura de energia e ao limitado fornecimento de combustíveis fósseis . Resíduos de óleo de cozinha, gordura animal, entre outros resíduos de origem biológica, tais como a borra de café, são exemplos de matérias-primas para a produção de biodiesel. A sua valorização tem interesse quer pela perspetiva ambiental, quer pela económica, pois aumenta não só a flexibilidade e diversificação das matérias-primas, mas também contribui para uma estabilidade de custos e alteração nas políticas agrícolas e de uso do solo. É neste contexto que se enquadra o biodiesel e a borra de café, pretendendo-se aqui efetuar o estudo da produção, à escala laboratorial, de biodiesel a partir da borra de café, por transesterificação enzimática, visando a procura das melhores condições reacionais. Iniciando-se com a caracterização da borra de café, foram avaliados antes e após a extração do óleo da borra de café, diversos parâmetros, de entre os quais se destacam: o teor de humidade (16,97% e 6,79%), teor de cinzas (1,91 e 1,57%), teor de azoto (1,71 e 2,30%), teor de proteínas (10,7 e 14,4%), teor de carbono (70,2 e 71,7%), teor de celulose bruta (14,77 e 18,48%), teor de lenhina (31,03% e 30,97%) e poder calorifico superior (19,5 MJ/kg e 19,9 MJ/kg). Sumariamente, constatou-se que os valores da maioria dos parâmetros não difere substancialmente dos valores encontrados na literatura, tendo sido evidenciado o potencial da utilização desta biomassa, como fonte calorifica para queima e geração de energia. Sendo a caracterização do óleo extraído da borra de café um dos objetivos antecedentes à produção do biodiesel, pretendeu-se avaliar os diferentes parâmetros mais significativos. No que diz respeito à caracterização do óleo extraído, distingue-se a sua viscosidade cinemática (38,04 mm2/s), densidade 0,9032 g/cm3, poder calorífico de 37,9 kcal/kg, índice de iodo igual a 63,0 gI2/ 100 g óleo, o teor de água do óleo foi de 0,15 %, o índice de acidez igual a 44,8 mg KOH/g óleo, ponto de inflamação superior a 120 ºC e teor em ácidos gordos de 82,8%. Inicialmente foram efetuados ensaios preliminares, a fim de selecionar a lipase (Lipase RMIM, TL 100L e CALB L) e álcool (metanol ou etanol puros) mais adequados à produção de biodiesel, pelo que o rendimento de 83,5% foi obtido através da transesterificação mediada pela lipase RMIM, utilizando como álcool o etanol. Sendo outro dos objetivos a otimização do processo de transesterificação enzimática, através de um desenho composto central a três variáveis (razão molar etanol: óleo, concentração de enzima e temperatura), recorrendo ao software JMP 8.0, determinou-se como melhores condições, uma razão molar etanol: óleo 5:1, adição de 4,5% (m/m) de enzima e uma temperatura de 45 ºC, que conduziram a um rendimento experimental equivalente a 96,7 % e teor de ésteres 87,6%. Nestas condições, o rendimento teórico foi de 99,98%. Procurou-se ainda estudar o efeito da adição de água ao etanol, isto é, o efeito da variação da concentração do etanol pela adição de água, para teores de etanol de 92%, 85% e 75%. Verificou-se que até 92% decorreu um aumento da transesterificação (97,2%) para um teor de ésteres de (92,2%), pelo que para teores superiores de água adicionada (75% e 85%) ocorreu um decréscimo no teor final em ésteres (77,2% e 89,9%) e no rendimento da reação (84,3% e 91,9%). Isto indica a ocorrência da reação de hidrólise em maior extensão, que leva ao desvio do equilíbrio no sentido contrário à reação de formação dos produtos, isto é, dos ésteres. Finalmente, relativamente aos custos associados ao processo de produção de biodiesel, foram estimados para o conjunto de 27 ensaios realizados neste trabalho, e que corresponderam a 767,4 g de biodiesel produzido, sendo o custo dos reagentes superior ao custo energético, de 156,16 € e 126,02 €, respetivamente. Naturalmente que não esperamos que, a nível industrial os custos sejam desta ordem de grandeza, tanto mais que há economia de escala e que as enzimas utilizadas no processo deveriam ser reutilizadas diversas vezes.

DISCORDANCE BETWEEN BODY MASS INDEX AND ANTHROPOMETRIC MEASUREMENTS AMONG HIV-1-INFECTED PATIENTS ON ANTIRETROVIRAL THERAPY AND WITH LIPOATROPHY/LIPOHYPERTROPHY SYNDROME

Introduction: Highly Active Antiretroviral Therapy (HAART) has improved and extended the lives of thousands of people living with HIV/AIDS around the world. However, this treatment can lead to the development of adverse reactions such as lipoatrophy/lipohypertrophy syndrome (LLS) and its associated risks. Objective: This study was designed to assess the prevalence of self-reported lipodystrophy and nutritional status by anthropometric measurements in patients with HIV/AIDS. Methods: An observational study of 227 adult patients in the Secondary Immunodeficiencies Outpatient Department of Dermatology, Hospital das Clínicas, Faculty of Medicine, University of São Paulo (3002 ADEE-HCFMUSP). The sample was divided into three groups; Group 1 = 92 patients on HAART and with self-reported lipodystrophy, Group 2 = 70 patients on HAART without self-reported lipodystrophy and Group 3 = 65 patients not taking HAART. The nutritional status of individuals in the study sample was determined by body mass index (BMI) and percentage of body fat (% BF). The cardiovascular risk and diseases associated with abdominal obesity were determined by waist/hip ratio (WHR) and waist circumference (WC). Results: The prevalence of self-reported lipoatrophy/lipohypertrophy syndrome was 33% among women and 59% among men. Anthropometry showed depletion of fat mass in the evaluation of the triceps (TSF) in the treatment groups with HAART and was statistically independent of gender; for men p = 0.001, and for women p = 0.007. Similar results were found in the measurement of skin folds of the upper and lower body (p = 0.001 and p = 0.003 respectively). In assessing the nutritional status of groups by BMI and % BF, excess weight and body fat were more prevalent among women compared to men (p = 0.726). The WHR and WC revealed risks for cardiovascular and other diseases associated with abdominal obesity for women on HAART and with self-reported LLS (p = 0.005) and (p = 0.011). Conclusions: Anthropometric measurements were useful in the confirmation of the prevalence of LLS. BMI alone does not appear to be a good parameter for assessing the nutritional status of HIV-infected patients on HAART and with LLS. Other anthropometric measurements are needed to evaluate patients with the lipoatrophy/lipohypertrophy syndrome.

Strength and damage analysis of composite-aluminium adhesively-bonded single-lap joints

With the need to find an alternative way to mechanical and welding joints, and at the same time to overcome some limitations linked to these traditional techniques, adhesive bonds can be used. Adhesive bonding is a permanent joining process that uses an adhesive to bond the components of a structure. Composite materials reinforced with fibres are becoming increasingly popular in many applications as a result of a number of competitive advantages. In the manufacture of composite structures, although the fabrication techniques reduce to the minimum by means of advanced manufacturing techniques, the use of connections is still required due to the typical size limitations and design, technological and logistical aspects. Moreover, it is known that in many high performance structures, unions between composite materials with other light metals such as aluminium are required, for purposes of structural optimization. This work deals with the experimental and numerical study of single lap joints (SLJ), bonded with a brittle (Nagase Chemtex Denatite XNRH6823) and a ductile adhesive (Nagase Chemtex Denatite XNR6852). These are applied to hybrid joints between aluminium (AL6082-T651) and carbon fibre reinforced plastic (CFRP; Texipreg HS 160 RM) adherends in joints with different overlap lengths (LO) under a tensile loading. The Finite Element (FE) Method is used to perform detailed stress and damage analyses allowing to explain the joints’ behaviour and the use of cohesive zone models (CZM) enables predicting the joint strength and creating a simple and rapid design methodology. The use of numerical methods to simulate the behaviour of the joints can lead to savings of time and resources by optimizing the geometry and material parameters of the joints. The joints’ strength and failure modes were highly dependent on the adhesive, and this behaviour was successfully modelled numerically. Using a brittle adhesive resulted in a negligible maximum load (Pm) improvement with LO. The joints bonded with the ductile adhesive showed a nearly linear improvement of Pm with LO.

Optimal Cut-Off Value for Homeostasis Model Assessment (HOMA) Index of Insulin-Resistance in a Population of Patients Admitted Electively in a Portuguese Cardiology Ward

INTRODUCTION: Insulin resistance is the pathophysiological key to explain metabolic syndrome. Although clearly useful, the Homeostasis Model Assessment index (an insulin resistance measurement) hasn't been systematically applied in clinical practice. One of the main reasons is the discrepancy in cut-off values reported in different populations. We sought to evaluate in a Portuguese population the ideal cut-off for Homeostasis Model Assessment index and assess its relationship with metabolic syndrome. MATERIAL AND METHODS: We selected a cohort of individuals admitted electively in a Cardiology ward with a BMI < 25 Kg/m2 and no abnormalities in glucose metabolism (fasting plasma glucose < 100 mg/dL and no diabetes). The 90th percentile of the Homeostasis Model Assessment index distribution was used to obtain the ideal cut-off for insulin resistance. We also selected a validation cohort of 300 individuals (no exclusion criteria applied). RESULTS: From 7 000 individuals, and after the exclusion criteria, there were left 1 784 individuals. The 90th percentile for Homeostasis Model Assessment index was 2.33. In the validation cohort, applying that cut-off, we have 49.3% of individuals with insulin resistance. However, only 69.9% of the metabolic syndrome patients had insulin resistance according to that cut-off. By ROC curve analysis, the ideal cut-off for metabolic syndrome is 2.41. Homeostasis Model Assessment index correlated with BMI (r = 0.371, p < 0.001) and is an independent predictor of the presence of metabolic syndrome (OR 19.4, 95% CI 6.6 - 57.2, p < 0.001). DISCUSSION: Our study showed that in a Portuguese population of patients admitted electively in a Cardiology ward, 2.33 is the Homeostasis Model Assessment index cut-off for insulin resistance and 2.41 for metabolic syndrome. CONCLUSION: Homeostasis Model Assessment index is directly correlated with BMI and is an independent predictor of metabolic syndrome.

Invasive Assessment of the Coronary Microcirculation Using the Index of Microcirculatory Resistance: Description and Validation of an Animal Model

INTRODUCTION: The index of microcirculatory resistance (IMR) enables/provides quantitative, invasive, and real-time assessment of coronary microcirculation status. AIMS: The primary aim of this study was to validate the assessment of IMR in a large animal model, and the secondary aim was to compare two doses of intracoronary papaverine, 5 and 10 mg, for induction of maximal hyperemia and its evolution over time. METHODS: Measurements of IMR were performed in eight pigs. Mean distal pressure (Pd) and mean transit time (Tmn) were measured at rest and at maximal hyperemia induced with intracoronary papaverine, 5 and 10 mg, and after 2, 5, 8 and 10 minutes. Disruption of the microcirculation was achieved by selective injection of 40-μm microspheres via a microcatheter in the left anterior descending artery. RESULTS: In each animal 14 IMR measurements were made. There were no differences between the two doses of papaverine regarding Pd response and IMR values - 11 ± 4.5 U with 5 mg and 10.6 ± 3 U with 10 mg (p=0.612). The evolution of IMR over time was also similar with the two doses, with significant differences from resting values disappearing after five minutes of intracoronary papaverine administration. IMR increased with disrupted microcirculation in all animals (41 ± 16 U, p=0.001). CONCLUSIONS: IMR provides invasive and real-time assessment of coronary microcirculation. Disruption of the microvascular bed is associated with a significant increase in IMR. A 5-mg dose of intracoronary papaverine is as effective as a 10-mg dose in inducing maximal hyperemia. After five minutes of papaverine administration there is no significant difference from resting hemodynamic status.

Empirical models for quantification of machining damage in composite materials

Dissertação para obtenção do Grau de Doutor em Engenharia Mecânica

Contribuição para a adaptação cultural do Neck Disability Index e caraterização da prática de fisioterapia em pacientes com dor crónica cervical

RESUMO: Objetivo: Este trabalho teve como objetivo contribuir para o processo de adaptação cultural do Neck Disability Index (NDI), através da análise da sua unidimensionalidade e do estudo da sua fiabilidade (consistência interna e fiabilidade teste-reteste), validade de constructo e poder de resposta. De igual forma pretendeu-se caraterizar a intervenção realizada pela fisioterapia e os resultados obtidos em pacientes com Dor Cervical Crónica (DCC). Introdução: A dor cervical é um problema cada vez mais comum nos países industrializados, constituindo uma das três condições mais frequentemente reportadas por queixas de origem músculo-esquelética. A sua incidência é um fenómeno em crescimento, com custos implicados para a sociedade. Desta forma reconhece-se a importância de um instrumento que monitorize a evolução da incapacidade funcional associada à DCC. O NDI é atualmente o instrumento de avaliação mais recomendado para avaliar a incapacidade funcional associada à dor cervical. Foi traduzido e adaptado à língua portuguesa, mas à data não foi realizada nenhuma avaliação das suas propriedades psicométricas. Por outro lado, apesar de a literatura referir que os serviços de Fisioterapia são extremamente procurados por indivíduos com DCC, em Portugal, a informação sobre a sua prática nesta condição clínica é escassa ou mesmo inexistente. Assim, e sendo a incapacidade nas atividades funcionais uma das variáveis de maior impacto da DCC e ao mesmo tempo um dos resultados principais da intervenção da Fisioterapia, importa por um lado possuir instrumentos capazes de avaliar o nível de incapacidade funcional e a sua mudança, e por outro, aferir qual a intervenção realizada pela Fisioterapia e quais os resultados obtidos. Metodologia: Realizou-se um estudo de coorte prospetivo com uma amostra de conveniência, do tipo não probabilístico, constituída por 88 pacientes com DCC de origem músculo-esquelética e causa não traumática referenciados para 6 serviços de fisioterapia / medicina física e de reabilitação de clínicas e centros de reabilitação, sendo elegíveis todos os pacientes que cumprissem os critérios de inclusão e exclusão estabelecidos. Os pacientes foram avaliados em três momentos pré-definidos: antes do início das sessões de fisioterapia ou na 1ª semana de tratamento; 4 a 7 dias após a 1ª avaliação; e 7 semanas após o início da fisioterapia. Para verificação da unidimensionalidade do NDI, procedeu-se a uma Análise Fatorial Exploratória. As propriedades psicométricas do NDI avaliadas foram a Fiabilidade (consistência interna e fiabilidade teste-reteste), a Validade de Constructo e o Poder de Resposta. Posteriormente procedeu-se à caraterização da prática da fisioterapia quanto às modalidades utilizadas, número de sessões de tratamento e duração do episódio de cuidados. Adicionalmente descreveu-se os resultados obtidos após a intervenção da fisioterapia ao nível da dor e incapacidade. Resultados: os resultados obtidos foram positivos e significativos, com a confirmação da unidimensionalidade do NDI, sendo que em todos os critérios seguidos o fator mínimo retido foi de um. Na avaliação da consistência interna o valor obtido foi acima do mínimo aceitável (α Cronbach = 0,77), enquanto o valor de fiabilidade teste-reteste foi elevado (CCI =0,95). De igual forma, os resultados foram positivos para a validade de constructo, obtendo-se uma associação positiva do NDI com a Escala Numérica da dor (END). O valores de poder de resposta reportaram uma Área Abaixo da Curva de 0,63 (IC 95%=0,51-0,75), com valor de Diferença Mínima Clinicamente importante de 5,5 pontos (sensibilidade = 69,6%; especificidade = 43,6%). Relativamente á intervenção de fisioterapia em casos de DCC verificou-se que as características da prática da fisioterapia reportadas neste relatório são de difícil comparação ou análise dada a escassez ou inexistência de trabalhos publicados sobre este assunto em pacientes com DCC. No entanto, neste estudo, encontraram-se reduções significativas na intensidade da dor e incapacidade funcional após a intervenção de fisioterapia (z= -7,16; p<0,001 e t= 10,412, p<0,05, respetivamente). Conclusão: Os resultados do presente estudo revelam que o NDI-VP possui uma boa Fiabilidade, Validade de Constructo e Poder de Resposta. Revela ainda que a intervenção da fisioterapia em casos de DCC, apesar da escassez de trabalhos publicados, proporciona uma redução significativa dos níveis de dor e incapacidade em pacientes com DCC.--------------- ABSTRACT:Objective: the aim of this study was to contribute for the process of cultural adaption of the Neck Disability Index (NDI), through the analysis of his unidimensionality and the study of his reliability (internal consistency and test-retest reliability), construct validity and responsiveness. At the same time it pretends to characterize the intervention performed by physical therapy and the results in patients with Chronic Neck Pain (CNP). Introduction: neck pain is a common problem in the industrialized countries, since is one of the three most reported conditions by complaints with musculoskeletal origin. His incidence is a growth phenomena that implicate great costs to society. Therefore the importance of an instrument that monitories the evolution of the functional disability associated to CNP is recognized. Nowadays, NDI is the instrument most recommended to evaluate functional disability associated to neck pain. It has been translated and adapted to portuguese but, till now, no evaluation of his psychometric proprieties has been completed. In the other hand, despite literature refers that physical therapy services are extremely searched by patients with neck pain, in Portugal, the information about practice in this clinical condition is very few or inexistent. Therefore, and since disability in the functional activities is one of the variables with most impact of CNP and, at the same time, one of the main results of physical therapy interventions, it’s important to have instruments capable of evaluate the level of functional disability and his change, and also calculate which intervention of physical therapy is most appropriate and his results. Methodology: it was used a prospective cohort study with a convenience sample, non-probabilistic, consisting of 88 patients with CNP of musculoskeletal origin and non-traumatic cause, referred to 6 physical therapy services of clinics and rehabilitation centers, and fulfilled the inclusion and exclusion criteria established. Patients were evaluated in three pre-defined moments: before the beginning of physical therapy or during the first week of treatment; 4 to 7 days after the first evaluation; and 7 weeks after beginning of physical therapy. To verify NDI unidimensionality, we run an Exploratory Factorial Analysis. NDI psychometric proprieties evaluated were reliability (internal consistency and test-retest reliability), construct validity and responsiveness. Subsequently, it was proceeded the characterization the practice of physical therapy regarding to the modalities used, the number of treatment sessions and duration of the episode of care. Additionally it was described the results obtained after the intervention of the physical therapy, the level of pain and the disability. Results: results were positive and significant, with the confirmation of the NDI unidimensionality, since in every followed criteria the minimal retained factor was one. In the evaluation of internal consistency the value was above the minimal accepted (α Cronbach = 0,77), and the test-retest reliability value was high (CCI =0,95). Results were positive to construct validity, with an positive association of the NDI with Numeric Rating Scale (NRS). Responsiveness values reported an Area Under Curve (AUC) of 0,63 (IC 95%=0,51-0,75) with a Minimal Important Detectable Change (MIDC) of 5,5 points (sensitivity = 69,9%; specificity = 43,6%). Regarding physical therapy interventions in CNP, it was verified that the physical therapy characteristics reported are difficult to compare or analyze since there are very few published studies about this topic. However, in this study, significant reductions were founded in pain intensity and functional disability after intervention(z= -7,16; p<0,001 and t= 10,412, p<0,05, respectively).Conclusion: present study results reveals that NDI has an good reliability, construct validity and responsiveness. It also reveals that physical therapy intervention in CNP, beside few studies published, result in a significant reduction of pain and disability levels in patients with CNP.

Extracting temporal and spatial distributions information about marine mucilage phenomenon based on Modis satellite images; a case study of the Tyrrhenian and the Adriatic Sea, 2010-2012

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Recent droughts and the impact of North Atlantic Oscillation in Iberia; a spatiotemporal analysis based on vegetation temperature condition Index (VTCI)

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Fat Mass Index Performs Best in Monitoring Management of Obesity in Prepubertal Children

An early and accurate recognition of success in treating obesity may increase the compliance of obese children and their families to intervention programs. This observational, prospective study aimed to evaluate the ability and the time to detect a significant reduction of adiposity estimated by body mass index (BMI), percentage of fat mass (%FM), and fat mass index (FMI) during weight management in prepubertal obese children.