Developing a research framework for understanding the social realities, with special reference to Sri Lankan entrepreneurs

This paper identifies and examines issues of relevance for increasing effectiveness of entrepreneurial management research. These issues emerged from research into entrepreneurial behaviour and underlying motivations in Sri Lanka. Understanding of socially- and culturally-bound social actors, social actions and social outputs in entrepreneurial activity requires context-sensitivity, expressed through cognisance of institutional characteristics, the interface between cultural values and business, and historical and cultural forces which impact on entrepreneurship. We suggest that this requires exploration through bottom-up translations of actions consistent with the beliefs and values of the actors involved, employing qualitative methodology to ground the reality of human behaviour in deep-rooted cultural and social contexts. Thorough interpretation of holistic case studies that are capable of capturing the actors' viewpoints brings appropriate insights to the field of entrepreneurship.

A CONSTRUÇÃO DA CARREIRA E O PAPEL DAS INSTITUIÇÕES DE ENSINO SUPERIOR PRIVADA: UM ESTUDO DE CASO

Este projeto se insere na área de Gestão de Carreiras e trata de questões referentes aos critérios utilizados para a construção de carreira dos alunos iniciantes do ensino superior. No momento da tomada de decisão, os jovens baseiam-se em seus desejos e aspirações, bem como são pressionados pela força cultura e social. Observam somente valores tais como status, remuneração e prestígio? O questionamento é permeado pela concepção de que o indivíduo é produto e também produtor da cultura. A relevância desta pesquisa se fundamenta na busca por compreender os critérios utilizados para a construção do caminho profissional dos jovens universitários, e qual a participação das instituições de ensino superior no processo. A pesquisa bibliográfica utilizada para a construção da plataforma teórica, permite aprofundar os conhecimentos sobre o tema, e serve como base para o estudo de caso que envolve alunos iniciantes do curso de administração de empresas e também uma profissional da área de Gestão de Carreira de uma instituição de ensino superior privada de São Paulo.(AU)

AC self-bearing motors with a bridge configured winding

Magnetic levitation bearings eliminate friction, wear and the need for lubrication and so have high speed capability and potential for vibration control. One noteworthy development in the realm of magnetic levitation is the self-bearing or bearingless motor - an electromagnetic machine that supports its own rotor by way of magnetic forces generated by windings on its stator. Accordingly, various winding schemes have been proposed to accomplish the task of force production. This thesis proposes a novel concept of winding based on a bridge connection for polyphase self-bearing rotating electrical machines with the following advantages: • the connection uses a single set of windings and thus power loss is relatively low when compared with self-bearing motors with conventional dual set of windings. • the motor and levitation controls are segregated such that only one motor inverter is required for the normal torque production and levitation forces are produced by using auxiliary power supplies of relatively low current and voltage rating. The usual way of controlling the motor is retained. • there are many variant winding schemes to meet special needs. • independent power supplies for levitation control offer redundancy for fault tolerance. This thesis dwells specifically on the conceptual design and implementation of the proposed single set of windings scheme. The new connection has been verified to exhibit characteristics of a self-bearing motor via coupled-field finite element analysis: results are crosschecked analytically. Power loss and other aspects such as cost, design implementation are compared to support the newly proposed connection as a potential alternative to present designs.

Deformations of the pneumatic tyre

A mathematical model is developed for the general pneumatic tyre. The model will permit the investigations of tyre deformations produced by arbitrary external loading, and will enable estimates to be made of the distributions of applied and reactive forces. The principle of Finite Elements is used to idealise the composite tyre structure, each element consisting of a triangle of double curvature with varying thickness. Large deflections of' the structure are accomodated by the use of an iterative sequence of small incremental steps, each of' which obeys the laws of linear mechanics. The theoretical results are found to compare favourably with the experimental test data obtained from two different types of ttye construction. However, limitations in the discretisation process has prohibited accurate assessments to be made of stress distributions in the regions of high stress gradients ..

A failure criterion for fillet welds

The work constitutes a study of the strength of mild steel fillet welds subject to static loading, and the behaviour of flange welded beam-column connections under combined bending and shear. Tests are conducted on short welds in the as-welded and stress relieved conditions, and also on full-size beam-column connections. It is shown that welds under compression have a lower strength than when under tension. Failure of the fillet weld is initiated at the weld root, the important factor controlling the initiation being weld ductility. The greater the residual stress, the lower the weld ductility and ultimate strength. Thermal stress relieving increases strength by as much as 30%. Weld failure plane is rarely at the throat and varies from 0° to 45° depending upon loading condition. Failure plane average stresses are related by a circular function which is expressed in terms of externally applied forces at limit state. The tension weld of a flange-welded beam-column connection always fails before the compression weld. The shear load sharing between the welds is a complex function of elastic compression of the web, elastic/plastic deformation of the flanges, load/deformation characteristics, and the type of load application. Bearing forces between the compression flange and column face produce low level bearing stresses and frictional forces which make a negligible contribution to shear load resistance. Three modes of connection failure are possible; 'end mode', 'bending mode' and 'shear mode', with a sudden change taking place between the two latter.

Modelling the dynamics of cutting during turning

This thesis presents an approach to cutting dynamics during turning based upon the mechanism of deformation of work material around the tool nose known as "ploughing". Starting from the shearing process in the cutting zone and accounting for "ploughing", new mathematical models relating turning force components to cutting conditions, tool geometry and tool vibration are developed. These models are developed separately for steady state and for oscillatory turning with new and worn tools. Experimental results are used to determine mathematical functions expressing the parameters introduced by the steady state model in the case of a new tool. The form of these functions are of general validity though their coefficients are dependent on work and tool materials. Good agreement is achieved between experimental and predicted forces. The model is extended on one hand to include different work material by introducing a hardness factor. The model provides good predictions when predicted forces are compared to present and published experimental results. On the other hand, the extension of the ploughing model to taming with a worn edge showed the ability of the model in predicting machining forces during steady state turning with the worn flank of the tool. In the development of the dynamic models, the dynamic turning force equations define the cutting process as being a system for which vibration of the tool tip in the feed direction is the input and measured forces are the output The model takes into account the shear plane oscillation and the cutting configuration variation in response to tool motion. Theoretical expressions of the turning forces are obtained for new and worn cutting edges. The dynamic analysis revealed the interaction between the cutting mechanism and the machine tool structure. The effect of the machine tool and tool post is accounted for by using experimental data of the transfer function of the tool post system. Steady state coefficients are corrected to include the changes in the cutting configuration with tool vibration and are used in the dynamic model. A series of oscillatory cutting tests at various conditions and various tool flank wear levels are carried out and experimental results are compared with model—predicted forces. Good agreement between predictions and experiments were achieved over a wide range of cutting conditions. This research bridges the gap between the analysis of vibration and turning forces in turning. It offers an explicit expression of the dynamic turning force generated during machining and highlights the relationships between tool wear, tool vibration and turning force. Spectral analysis of tool acceleration and turning force components led to define an "Inertance Power Ratio" as a flank wear monitoring factor. A formulation of an on—line flank wear monitoring methodology is presented and shows how the results of the present model can be applied to practical in—process tool wear monitoring in • turning operations.

On the Feasibility of Steering Swallowable Microsystem Capsules Using Computer-Aided Magnetic Levitation

Swallowable capsule endoscopy is used for non-invasive diagnosis of some gastrointestinal (GI) organs. However, control over the position of the capsule is a major unresolved issue. This study presents a design for steering the capsule based on magnetic levitation. The levitation is stabilized with the aid of a computer-aided feedback control system and diamagnetism. Peristaltic and gravitational forces to be overcome were calculated. A levitation setup was built to analyze the feasibility of using Hall Effect sensors to locate the in- vivo capsule. CAD software Maxwell 3D (Ansoft, Pittsburgh, PA) was used to determine the dimensions of the resistive electromagnets required for levitation and the feasibility of building them was examined. Comparison based on design complexity was made between positioning the patient supinely and upright.

A review of Taiwan's technological five-year junior college mechanical engineering curriculum development: 1948 to 1994

Taiwan's technological five-year junior college (TFYJC) was founded in 1948 to train technicians to meet the demand coming from national construction. Site level professionals never were trained in curriculum development as this was under strict national control. The purpose of this study is to present an accurate narrative of Taiwan's TFYJC mechanical engineering curriculum development history in order to display the focus, rationale, and influencing forces of the evolving curriculum. This study employed historical research methodology and used document analysis as the primary approach.^ This analysis revealed that the target FYJC curriculum was manufacturing-oriented. The range of government control shifted from little, to full, then to partial control of the curriculum, from autonomy to uniformity then to partial autonomy. The intention of the target curriculum development was always to advance domestic economic development. Voices from the academia and government also influenced curriculum development decisions. Currently, the government has instituted a shift in focus and content causing individual institutions to develop curriculum responses addressing the challenge of advancing Taiwan's position in a global economy.^ Considering the shift in policy and practice, individual institutions intending to design curriculum are advised to implement empirical needs assessments of students, graduates, and employers and to engage in critical studies of emerging resources in order to provide effective in service training. To accomplish this end, TFYJC faculty and administration need training in curriculum theory and practice and evaluation. ^

Health care utilization behavior of elders in a multicultural urban environment

The objective of this research is to determine the influences of social, environmental, behavioral, and economic forces on the health care service utilization of four racial/ethnic groups of non-institutionalized elders in a multicultural urban environment. To address these issues this dissertation examines three intertwined themes of culture, aging, and health, using a sample of elders residing in Miami-Dade County, FL in four racial/ethnic groups: white non-Hispanic; black non-Hispanic English speakers; Cuban; and non-Cuban Hispanic. ^ The research questions were analyzed using both quantitative and qualitative data. Data for the quantitative component uses telephone survey data from the Dade County Needs Assessment. The purpose of this component is to develop a more comprehensive model of elder health care utilization behavior. The qualitative component uses data from focus groups from Dade County Needs Assessment, archival data and a literature review of previous ethnographic research. The purpose of this component is to gain a better understanding of the social construction of the terms “age”' and “aging,” as well as to place issues of health and health care in the lives of elders. ^ The findings raised several important issues. First, just because people share a common chronological age does not mean that they are the same in every other respect. Examining elders as a homogeneous group of users of formal health care services in a community is simplistic. Placing “aging” and “health” in a cultural context is important. My findings confirm that the meaning of “aging” and “old” are socially constructed. Further, the term “aging” is NOT synonymous with ill health or frailty. This was a consistent finding in both the quantitative and qualitative results. ^ While all aging individuals share a mutual orientation toward aging (i.e., biological process), they do not age the same way (i.e., social construction of “aging”). Thus, policymakers and others serving the elder population must be aware of the particular cultural context, as well as the previous life experiences of the individuals that they serve. This analysis documents the importance of culture and geographic community in understanding health care service utilization of elders. ^

Global factors affecting women's participation in leadership

This dissertation is a multi-level, cross-cultural study of women in leadership conducted with both macro-society data and individual-level data aggregated to the country level. The research questions are, “What macro and micro forces are hindering or advancing women into business or political leadership?” “How do these forces impact the level of women's involvement in business and political leadership in a particular country?” Data was collected from 10 secondary sources, available for 213 countries, and includes about 300 variables for business leadership (N=115) and political leadership (N=181). To date, most women in leadership research has been Western- or US-based, and little rigorous empirical, multi-level research has been done across countries. The importance of cross-cultural studies on women in leadership stems from the potential to better understand why some countries have more women in positions of both business and political leadership; and the factors that affect women's involvement in such positions in different countries. A “Levels of Women's Participation in Leadership” country model is tested using cluster and discriminant analyses. Results indicate that the factors that affect women?s participation in leadership in countries with fewer women leaders are different from the factors that affect women's participation in countries with high levels of participation. This dissertation proposes that initiatives to increase participation of women in leadership need to consider the relevant factors that significantly affect countries at certain Levels of Women's Participation in Leadership. ^

Stable isotopes reveal complex changes in trophic relationships following nutrient addition in a coastal marine ecosystem

Complex links between the top-down and bottomup forces that structure communities can be disrupted by anthropogenic alterations of natural habitats.We used relative abundance and stable isotopes to examine changes in epifaunal food webs in seagrass (Thalassia testudinum) beds following 6 months of experimental nutrient addition at two sites in Florida Bay (USA) with different ambient fertility. At a eutrophic site, nutrient addition did not strongly affect food web structure, but at a nutrient-poor site, enrichment increased the abundances of crustacean epiphyte grazers, and the diets of these grazers became more varied. Benthic grazers did not change in abundance but shifted their diet away from green macroalgae + associated epiphytes and towards an opportunistic seagrass (Halodule wrightii) that occurred only in nutrient addition treatments. Benthic predators did not change in abundance, but their diets were more varied in enriched plots. Food chain length was short and unaffected by site or nutrient treatment, but increased food web complexity in enriched plots was suggested by increasingly mixed diets. Strong bottom-up modifications of food web structure in the nutrient-limited site and the limited top-down influences of grazers on seagrass epiphyte biomass suggest that, in this system, the bottom-up role of nutrient enrichment can have substantial impacts on community structure, trophic relationships, and, ultimately, the productivity values of the ecosystem.

Illicit interest groups: The political impact of the Medellin drug trafficking organizations in Colombia

Although drug trafficking organizations (DTOs) exist and have an effect on health, crime, economies, and politics, little research has explored these entities as political organizations. Legal interest groups and movements have been found to influence domestic and international politics because they operate within legal parameters. Illicit groups, such as DTOs, have rarely been accounted for—especially in the literature on interest groups—though they play a measurable role in affecting domestic and international politics in similar ways. Using an interest group model, this dissertation analyzed DTOs as illicit interest groups (IIGs) to explain their political influence. The analysis included a study of group formation, development, and demise that examined IIG motivation, organization, and policy impact. The data for the study drew from primary and secondary sources, which include interviews with former DTO members and government officials, government documents, journalistic accounts, memoirs, and academic research. To illustrate the interest group model, the study examined Medellin-based DTO leaders, popularly known as the "Medellin Cartel." In particular, the study focused on the external factors that gave rise to DTOs in Colombia and how Medellin DTOs reacted to the implementation of counternarcotics efforts. The discussion was framed by the implementation of the 1979 Extradition Treaty negotiated between Colombia and the United States. The treaty was significant because as drug trafficking became the principal bilateral issue in the 1980s; extradition became a major method of combating the illicit drug business. The study's findings suggested that Medellin DTO leaders had a one-issue agenda and used a variety of political strategies to influence public opinion and all three branches of government—the judicial, the legislative, and the executive—in an effort to invalidate the 1979 Extradition Treaty. The changes in the life cycle of the 1979 Extradition Treaty correlated with changes in the political power of Medellin-based DTOs vis-à-vis the Colombian government, and international forces such as the U.S. government's push for tougher counternarcotics efforts.

The Study of Clustering of Taiwanese Tourists' Motivations to Hong Kong

Abstract Driven by the political and economic forces of cross-strait, Taiwan has become one of the major source markets for Hong Kong tourism industry since 1987. The major purposes of this study were to investigate the following factors (1) The influential factors of travel motivation, (2) The clusters of travel motivations, (3) The marketing segmentation of clusters of Taiwanese tourists to visit Hong Kong. Through ten travel agents, self-report surveys were distributed to collect data from 366 Taiwanese travelers. Hence, four push factors and six pull factors were identified as travel motivations through the factor analysis. Combined with the cluster analysis; five new groups were founded. Finally, five clusters which process unique profiles (location difference, visiting frequency, travel satisfaction, and destination loyalty) were addressed. The suggestions of developing effective market strategies to attract Taiwanese tourists to Hong Kong were also provided.

Planning of schools as communities

The purpose of this research paper was to conduct a literature review to explore both the physical and historical aspects of schools and their communities in order to ascertain the nature of the disconnect that exists today between schools and communities. This paper reviews the purpose of the public school, from the origin of the one-room schoolhouse to today's urban schools; the impact of immigration, segregation, technology and industrialization on the public school and the forces behind public school reform. The reform processes and the programs developed to stimulate the public school including the transformation of the learning environment in the communities they serve was discussed. The research indicates that the return to a community school with small learning environments that involves communities and residents in the planning of schools as communities, is the most promising form of public school reform.

Impact of the Afghan refugees on Pakistan

There was a massive influx of Afghan refugees into Pakistan following the Soviet military intervention in Afghanistan in December 1979. An attempt has been made here to analyze the political, ethnic, economic and social ramifications of the Afghan refugees on Pakistan. Among the consequences of the presence of Afghan refugees are: 1. A heavy burden on Pakistan's resources on account of sustaining the 2.8 million Afghan refugees 2. Friction between Afghan refugees and the Pakistani population, due to land, employment, animal grazing-pasture and water-supply disputes, and 3. A direct threat to Pakistan's internal security and political stability, which is made evident by numerous violations of Pakistan's western borders by Soviet-Afghan air and ground forces in pursuit of the refugees and Afghan Mujahidin. The political talks on the Afghan crisis are deadlocked on the question of a Soviet troop withdrawal. The Soviets and Afghans insist on the stoppage of foreign support to the Afghan counterrevolutionaries. The refugees in Pakistan will not return to their homes unless they are insured a safe and honorable life by the Afghan government.