Field-effect transistors based on Zinc oxide nanoparticles

This work reports the development of field-effect transistors (FETs), whose channel is based on zinc oxide (ZnO) nanoparticles (NPs). Using screen-printing as the primary deposition technique, different inks were developed, where the semiconducting ink is based on a ZnO NPs dispersion in ethyl cellulose (EC). These inks were used to print electrolyte-gated transistors (EGTs) in a staggered-top gate structure on glass substrates, using a lithium-based polymeric electrolyte. In another approach, FETs with a staggered-bottom gate structure on paper were developed using a sol-gel method to functionalize the paper’s surface with ZnO NPs, using zinc acetate dihydrate (ZnC4H6O4·2H2O) and sodium hydroxide (NaOH) as precursors. In this case, the paper itself was used as dielectric. The various layers of the two devices were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimetric analyses (TG-DSC). Electrochemical impedance spectroscopy (EIS) was used in order to evaluate the electric double-layer (EDL) formation, in the case of the EGTs. The ZnO NPs EGTs present electrical modulation for annealing temperatures equal or superior to 300 ºC and in terms of electrical properties they showed On/Off ratios in the order of 103, saturation mobilities (μSat) of 1.49x10-1 cm2(Vs)-1 and transconductance (gm) of 10-5 S. On the other hand, the ZnO NPs FETs on paper exhibited On/Off ratios in the order of 102, μSat of 4.83x10- 3 cm2(Vs)-1and gm around 10-8 S.

Reclamações dos utentes : estudo dos resultados e medidas correctivas no contexto dos Agrupamentos de Centros de Saúde de Lisboa e Vale do Tejo

RESUMO - A qualidade dos cuidados de saúde, evolui ao longo dos tempos e é agora considerada um direito e um pilar fundamental nos serviços de saúde. As reclamações dos utentes podem revelar informação acerca das experiências entre os utentes e as organizações de saúde. Desta forma as reclamações podem ser consideradas como indicadores de qualidade que permitem identificar áreas e/ou oportunidades de melhoria, e de grande representatividade no processo da melhoria contínua da qualidade na saúde. Sendo fundamental dar voz aos utentes do SNS e possibilitar a sua participação activa no processo de melhoria da prestação dos cuidados de saúde, com este trabalho pretendeu-se estudar a forma como as reclamações dos utentes nos ACES na Região de Saúde de Lisboa e Vale do Tejo, contribuem para a melhoria da qualidade nos referidos serviços de saúde. Foram reconhecidas e analisadas as principais causas de reclamação, as correspondentes medidas correctivas e as necessidades e/ou dificuldades no seu processo de implementação, bem como a respectiva avaliação dos resultados obtidos e identificação das recomendações dos Coordenadores dos Gabinetes do Utente no âmbito dos ACES da Região de Saúde de LVT. Efectuou-se a análise de revisão bibliográfica e a consulta dos dados, desagregados, das causas mais mencionadas nas reclamações no âmbito do estudo e foram realizados contactos informais com a estrutura regional e nacional do Sistema SIM-Cidadão. Foram aplicados 15 questionários aos Coordenadores Locais dos Gabinetes do Cidadão dos ACES da ARSLVT, apresentando a investigação um carácter exploratório e qualitativo. Os questionários, foram enviados e recebidos anonimamente através da plataforma para estudos estatísticos Survey Monkey. A sua análise e interpretação, foi efectuada de forma a organizar os seus dados de uma forma sistematizada e permitir categorizar a informação para permitir a sua análise. Os resultados evidenciaram que as reclamações dos utentes apresentadas nos Gabinetes do Cidadão, de certa forma, foram um contributo para o processo da melhoria da qualidade nos ACES da Região de Saúde de Lisboa e Vale do Tejo através do adopção de medidas e acções correctivas, ultrapassando algumas limitações devida à criação de estratégias locais. No entanto foi evidente que algumas limitações não foram passiveis de ser ultrapassadas, pois envolvem decisões do âmbito externo aos ACES. Os resultados alcançados e as recomendações dos Coordenadores, podem evidenciar algumas mudanças organizacionais, mas transparecem a ideia de que existe ainda um longo caminho a percorrer.

Switching mode power amplifier for bluetooth applications

Modern fully integrated transceivers architectures, require circuits with low area, low cost, low power, and high efficiency. A key block in modern transceivers is the power amplifier, which is deeply studied in this thesis. First, we study the implementation of a classical Class-A amplifier, describing the basic operation of an RF power amplifier, and analysing the influence of the real models of the reactive components in its operation. Secondly, the Class-E amplifier is deeply studied. The different types of implementations are reviewed and theoretical equations are derived and compared with simulations. There were selected four modes of operation for the Class-E amplifier, in order to perform the implementation of the output stage, and the subsequent comparison of results. This led to the selection of the mode with the best trade-off between efficiency and harmonics distortion, lower power consumption and higher output power. The optimal choice was a parallel circuit containing an inductor with a finite value. To complete the implementation of the PA in switching mode, a driver was implemented. The final block (output stage together with the driver) got 20 % total efficiency (PAE) transmitting 8 dBm output power to a 50 W load with a total harmonic distortion (THD) of 3 % and a total consumption of 28 mW. All implementations are designed using standard 130 nm CMOS technology. The operating frequency is 2.4 GHz and it was considered an 1.2 V DC power supply. The proposed circuit is intended to be used in a Bluetooth transmitter, however, it has a wider range of applications.

Introducing spin-off stocks into the NSP’s risk parity strategy

Field lab: Nova Student Portfolio

Growth and puberty after treatment for acute lymphoblastic leukemia

Over the last 20 years, after combining treatment of chemotherapy and radiotherapy, there has been an improvement in the survival rate of acute lymphoblastic leukemia patients, with a current cure rate of around 70%. Children with the disease have been enrolled into international treatment protocols designed to improve survival and minimize the serious irreversible late effects. Our oncology unit uses the international protocol: GBTLI LLA-85 and 90, with the drugs methotrexate, cytosine, arabinoside, dexamethasone, and radiotherapy. However, these treatments can cause gonadal damage and growth impairment. PATIENTS AND METHOD: The authors analyzed 20 children off therapy in order to determine the role of the various doses of radiotherapy regarding endocrinological alterations. They were divided into 3 groups according to central nervous system prophylaxis: Group A underwent chemotherapy, group B underwent chemotherapy plus radiotherapy (18 Gy), and group C underwent chemotherapy plus radiotherapy (24 Gy). Serum concentrations of LH, FSH, GH, and testosterone were determined. Imaging studies included bone age, pelvic ultrasound and scrotum, and skull magnetic resonance imaging. RESULTS: Nine of the patients who received radiotherapy had decreased pituitary volume. There was a significant difference in the response to GH and loss of predicted final stature (Bayley-Pinneau) between the 2 irradiated groups and the group that was not irradiated, but there was no difference regarding the radiation doses used (18 or 24 Gy). The final predicted height (Bayley-Pinneau) was significantly less (P = 0.0071) in both groups treated with radiotherapy. Two girls had precocious puberty, and 1 boy with delayed puberty presented calcification of the epididymis. CONCLUSION: Radiotherapy was been responsible for late side effects, especially related to growth and puberty.

Carl Icahn pushes ebay to spin-off paypal

The following case-study describes the situation involving eBay, PayPal and Carl Icahn as of February 2014. Its structure is divided between the narrative and a teaching note. The case narrative describes all the events between the three parties until the 24th of February 2014, when the activist investor Carl Icahn sends a public shareholder letter strongly criticizing eBay’s board and corporate governance practices while proposing at the same time the spin-off of PayPal from eBay. The teaching note intends to analyse the possibility of spinning-off PayPal, while at the same time analysing the Corporate Governance issues in eBay’s board. The final conclusion in the teaching note is favourable towards the spin-off of PayPal.

Quadratic programming versus second order con programming in portfolio optimization

Despite the extensive literature in finding new models to replace the Markowitz model or trying to increase the accuracy of its input estimations, there is less studies about the impact on the results of using different optimization algorithms. This paper aims to add some research to this field by comparing the performance of two optimization algorithms in drawing the Markowitz Efficient Frontier and in real world investment strategies. Second order cone programming is a faster algorithm, appears to be more efficient, but is impossible to assert which algorithm is better. Quadratic Programming often shows superior performance in real investment strategies.

What should Fundação Calouste Gulbenkian do in order to attract the National Millennials?

Branding Lab

Which communication strategy should a male luxury (fashion) brand – associated with a luxury car brand – develop, in order to increase its awareness in Europe

This work project explores how a male luxury (fashion) brand (subsidiary) that is associated with a luxury car brand (parent company) should develop its communication strategy in order to increase awareness in Europe. For this purpose a quantitative research was conducted. The aim was to find out whether the company in question had low brand awareness among European luxury consumers. Hereafter, a qualitative research revealed important insights in regard to luxury communication among male luxury consumers. Both the results of the research and the recommendations of luxury experts laid the foundation for the development of a solution-oriented communication strategy. The result of the analysis crystallizes the importance of the shared heritage and the synergistic effects, of which the subsidiary should make vast use when communicating.

Therapeutics bioconjugates: evaluation of iminoboronates as payload delivery system for cancer

The advent of bioconjugation impacted deeply the world of sciences and technology. New biomolecules were found, biological processes were understood, and novel methodologies were formed due to the fast expansion of this area. The possibility of creating new effective therapies for diseases like cancer is one of big applications of this now big area of study. Off target toxicity was always the problem of potent small molecules with high activity towards specific tumour targets. However, chemotherapy is now selective due to powerful linkers that connect targeting molecules with affinity to interesting biological receptors and cytotoxic drugs. This linkers must have very specific properties, such as high stability in plasma, no toxicity, no interference with ligand affinity nor drug potency, and at the same time, be able to lyse once inside the target molecule to release the therapeutic warhead. Bipolar environments between tumour intracellular and extracellular medias are usually exploited by this linkers in order to complete this goal. The work done in this thesis explores a new model for that same task, specific cancer drug delivery. Iminoboronates were studied due to its remarkable selective stability towards a wide pH range and endogenous molecules. A fluorescence probe was design to validate this model by creating an Off/On system and determine the payload release location in situ. A process was optimized to synthetize the probe 8-(1-aminoethyl)-7-hydroxy-coumarin (1) through a reductive amination reaction in a microwave reactor with 61 % yield. A method to conjugate this probe to ABBA was also optimized, obtaining the iminoboronate in good yields in mild conditions. The iminoboronate model was studied regarding its stability in several simulated biological environments and each half-life time was determined, showing the conjugate is stable most of the cases except in tumour intracellular systems. The construction of folate-ABBA-coumarin bioconjugate have been made to complete this evaluation. The ability to be uptaken by a cancer cell through endocytosis process and the conjugation delivery of coumarin fluorescence payload are two features to hope for in this construct.

How to reduce the causes of call center contact by implementing web self-service at Sonae MC?

This project aims to provide feasible solutions to improve customer´s Help Area at Continente Online. The goal is to increase satisfaction and loyalty by reducing the main causes that lead customers to appeal to Call Center or abandon the website. The pursued solution is the implementation of Web Self-Service and the vision taken is focused not only on providing customers basic help tools but also innovate with international best practices to sustain Sonae MC´s present and future market leader position. Customer´s feedback, costs and impact are taken in consideration to find the best fit for the company.

Multifunctional converter to interface renewable energy sources and electric vehicles with the power grid in smart grids context

This paper proposes a multifunctional converter to interface renewable energy sources (e.g., solar photovoltaic panels) and electric vehicles (EVs) with the power grid in smart grids context. This multifunctional converter allows deliver energy from the solar photovoltaic panels to an EV or to the power grid, and exchange energy in bidirectional mode between the EV and the power grid. Using this multifunctional converter are not required multiple conversion stages, as occurs with the traditional solutions, where are necessary two power converters to integrate the solar photovoltaic system in the power grid and also two power converters to integrate an off-board EV battery charger in the power grid (dc-dc and dc-ac power converters in both cases). Taking into account that the energy provided (or delivered) from the power grid in each moment is function of the EV operation mode and also of the energy produced from the solar photovoltaic system, it is possible to define operation strategies and control algorithms in order to increase the energy efficiency of the global system and to improve the power quality of the electrical system. The proposed multifunctional converter allows the operation in four distinct cases: (a) Transfer of energy from the solar photovoltaic system to the power grid; (b) Transfer of energy from the solar photovoltaic system and from the EV to the power grid; (c) Transfer of energy from the solar photovoltaic system to the EV or to the power grid; (d) Transfer of energy between the EV and the power grid. Along the paper are described the system architecture and the control algorithms, and are also presented some computational simulation results for the four aforementioned cases. It is also presented a comparative analysis between the traditional and the proposed solution in terms of operation efficiency and estimated cost of implementation.

Fatores de sucesso e dificuldades das spin-offs empresariais: o caso das agências de mediação de seguros

Dissertação de mestrado em Marketing e Estratégia

A sixth-order finite volume method for the 1D biharmonic operator: application to intramedullary nail simulation

A new very high-order finite volume method to solve problems with harmonic and biharmonic operators for one- dimensional geometries is proposed. The main ingredient is polynomial reconstruction based on local interpolations of mean values providing accurate approximations of the solution up to the sixth-order accuracy. First developed with the harmonic operator, an extension for the biharmonic operator is obtained, which allows designing a very high-order finite volume scheme where the solution is obtained by solving a matrix-free problem. An application in elasticity coupling the two operators is presented. We consider a beam subject to a combination of tensile and bending loads, where the main goal is the stress critical point determination for an intramedullary nail.

A high order model for piezoelectric rods: an asymptotic approach

Preprint submitted to International Journal of Solids and Structures. ISSN 0020-7683