Catalogus haereticorum, omnium pene, qui ad haec vsque tempora passim literarum monumentis proditi sunt, illorum nomina, errores, & te[m]pora quibus vixerunt oste[n]dens / a F. Bernardo Lutzenburgo ... Ordinis Pr[a]edicatorii, co[n]scriptus, in cuius calc

Marca tip. en port. (Renouard, 893)

Native bradyrhizobial symbionts of Lupinus mariae-josephae, a unique endemism thriving in alkaline soils in Eastern Spain

Lupinus mariae-josephae (Lmj) es una especie de lupino endémica de una pequeña y específica área de Comunidad Valenciana (Este de España), donde prospera en suelos alcalinoscalcáreos, un hábitat singular para los altramuces, que crecen preferentemente en suelos ácidos o neutros. Esto hace de Lmj una especie de lupino única. Cuando se inició este trabajo, la extensión conocida de este endemismo abarcaba unos 700 kilómetros cuadrados, confinados en la provincia de Valencia. En esta área, Lmj prospera en pequeñas poblaciones aisladas que contienen un número reducido de plantas por lo que se la consideró una especie en peligro de extinción. Todos los esfuerzos, utilizando estrategias clásicas dirigidas a ampliar el área de crecimiento de Lmj y garantizar su conservación, han tenido un éxito limitado. El trabajo que se presenta está dirigido a mejorar el conocimiento de la ecología de Lmj, en particular la interacción simbiótica que establece con bacterias del suelo denominadas rizobios y se centra en la caracterización fenotípica, filogenética y genómica de esos rizobios. También se investiga la posible contribución de la simbiosis en mejorar la conservación de Lmj. Para este fin, se han estudiado diferentes aspectos que se describen a continuación. El primero objetivo se centró en aislar y estudiar de la diversidad genética de las bacterias endosimbióticas de Lmj. . Se realizó un análisis filogenético de genes esenciales que mostró que las cepas de Lmj pertenecen al género Bradyrhizobium y que presentan una gran diversidad con características fenotípicas y simbióticas diferentes de cepas de Bradyrhizobium que nodulan otras especies de lupinos nativos de España (cepas ISLU). Las cepas estudiadas se dividieron en dos grupos (Clado I y Clado II). El Clado I, incluye a las cepas Lmj, definiendo un nuevo linaje, filogenéticamente relacionado con otras especies de Bradyrhizobium, como B. jicamae y B. elkanii. El Clado II contiene cepas ISLU relacionadas con cepas de B. canariense y B. japonicum que establecen simbiosis con lupinos de suelos ácidos. Otro análisis filogenético basado en genes simbióticos, distribuyó las cepas de Lmj en sólo dos grupos diferentes. La singularidad y gran diversidad de estas cepas en una pequeña área geográfica, hacen de este, un atractivo sistema para el estudio de la evolución y adaptación de las bacterias simbióticas a su respectiva planta huésped. Adicionalmente, se estudio la presencia de bacterias capaces de nodular Lmj en suelos básicos de Chiapas, México. Sorprendentemente, estos suelos contienen bacterias capaces establecer interacciones simbióticas eficientes con Lmj en ensayos de invernadero. A continuación se investigó la taxonomía de los endosimbiontes de Lmj analizando la secuencia de cuatro genes esenciales (16S rRNA, recA, glnII y atpD) y el promedio de identidad de nucleótidos de genomas completos de algunas cepas representativas de la diversidad (ANIm). Se identificaron nuevas especies de Bradyrhizobium dentro del Clado I y se definió una de ellas: 'Bradyrhizobium valentinum' sp. nov (cepa tipo LmjM3T = CECT 8364T, LMG 2761T). También se abordó cómo conservar Lmj en su hábitat natural mediante inoculación con alguna de las cepas aisladas. Se demostró la ausencia de bacterias capaces de nodular Lmj en suelos rojos alcalinos o ‘‘terra rossa’’ de la Península Ibérica y Baleares. Dos cepas, altamente eficientes en cuanto a la fijación de nitrógeno, LmjC y LmjM3T, fueron seleccionadas para ser empleadas como inoculantes. Dos experimentos de campo llevados a cabo en años consecutivos en áreas con características edafoclimáticas similares a las que presentan las poblaciones de Lmj, lograron la reproducción exitosa de la planta. Se concluyó que un ciclo reproductivo exitoso de Lmj es absolutamente dependiente de la inoculación con sus simbiontes naturales y que la simbiosis debe ser considerada un factor esencial en estrategias de conservación de leguminosas en peligro. La obtención de varias secuencias genómicas de cepas aisladas de Lmj y de otras cepas de Bradyrhizobium reveló una alta similitud entre los genomas de las cepas del Clado I, y permitió la identificación de cinco posibles nuevas especies. Además, se estudiaron tres agrupaciones de genes relacionados con la simbiosis (nod, nif y fix) definiendo un nuevo linaje para las cepas de Lmj, diferente del symbiovar “genistearum” de B. canariense y B. japonicum. La baja diversidad encontrada en el análisis filogenético de los genes simbióticos contrasta con la gran diversidad asociada a genes esenciales. La presencia de plásmidos en cepas del género Bradyrhizobium ha sido descrita en muy pocas ocasiones, sin embargo el análisis de la secuencia genómica de la cepa ISLU101, aislada de Lupinus angustifolius, reveló la presencia de un origen de replicación extracromosómico homólogo al operón repABC, presente en el plásmido de Bradyrhizobium sp BTAi1. Gracias a esta secuencia se identificaron genes homólogos en 19 de 72 cepas ISLU. Filogenéticamente, las secuencias de repABC se agruparon en un grupo monofilético con las de pBTAi1 y separadas de los rizobios de crecimiento rápido. Finalmente, se identificaron sistemas de secreción de proteínas de tipo III (T3SS) en nueve genomas de cepas de Lmj. Los T3SS pueden inyectar proteínas efectoras al interior de células vegetales. Su presencia en rizobios se ha relacionado con la gama de hospedador que pueden nodular y puede tener un efecto beneficioso, neutro o perjudicial en la simbiosis. Los T3SS de las cepas de Lmj codifican para una proteína efectora similar a NopE, un efector dependiente de T3SS descrito en B. diazoefficiens USDA 110T. La proteína NopE de la cepa LmjC se ha caracterizado bioquímicamente. ABSTRACT Lupinus mariae-josephae (Lmj) is a lupine species endemic of a unique small area in Valencia region (Eastern Spain) where the lupine plants thrive in alkaline-limed soils, which preferentially grow in acid or neutral soils. This is the type of soils native lupines of Spain. When this work was initiated, the extension of the endemic area of Lmj was of about 700 squared kilometers confined to the Valencia province. In this area, Lmj thrives in small, isolated patches containing a reduced number of plants, and points to an endemism that can easily became endangered or extinct. Consequently, the Valencia Community authorities gave a ‘‘microreserve” status for conservation of the species. All efforts, using classical strategies directed to extend the area of Lmj growth and ensure its conservation have been so far unsuccessful. The work presented here is directed to improve our knowledge of Lmj ecology and it is centered in the characterization of the rhizobial symbiosis by phenotypic, phylogenetic and genomic analysis as well as in investigate the potential contribution of the symbiosis to improve its conservation. To this end, five different topics have been studied, and results are briefly described here. Extensive details can be followed en the attached, published articles. The first topic deals with the indigenous rhizobial symbionts of the Lmj endemism, and its genetic diversity was investigated. The Lmj root symbionts belong to the Bradyrhizobium genus, and phylogenetic analysis based on core genes identified a large diversity of Bradyrhizobium strains with phenotypic and symbiotic characteristics different from rhizobia nodulating other Lupinus spp. native of Spain. The strains were split in two clades. Clade II contained strains close to classical B. canariense and B. japonicum lineages that establish symbioses with lupines in acid soils of the Mediterranean area. Clade I included Lmj strains that define a new lineage, close to other Bradyrhizobium species as B. jicamae and B. elkanii. The phylogenetic analysis based on symbiotic genes identified only two distinct clusters. The singularity and large diversity of these strains in such a small geographical area makes this an attractive system for studying the evolution and adaptation of the rhizobial symbiont to the plant host. Additionally, the presence of bacteria able to nodulate Lmj in basic soils from Chiapas, Mexico was investigated. Surprisingly, these soils contain bacteria able to effectively nodulate and fix nitrogen with Lmj plants in greenhouse assays. In the second topic, the taxonomic status of the endosymbiotic bacteria of Lmj from Valencia endemism and Chiapas was investigated. Results from phylogenetic analysis of core genes and Average Nucleotide Identity (ANIm) using draft genomic sequences identified new Bradyrhizobium species within strains of Clade I of Lmj endosymbiotic bacteria. Only one of these potentially new species has been defined, meanwhile the others are under process of characterization. The name ‘Bradyrhizobium valentinum’ sp. nov. was proposed for the defined species (type strain LmjM3T= CECT 8364T, LMG 2761T). The third topic was directed to conservation of endangered Lmj in its natural habitat. The relevant conclusion of this experimentation is that the symbiosis should be considered as a relevant factor in the conservation strategies for endangered legumes. First, we showed absence of bacteria able to nodulate Lmj in all the inspected ‘‘terra rossa’’ or alkaline red soils of the Iberian Peninsula and Balearic Islands. Then, two efficient nitrogen fixing strains with Lmj plants, LmjC and LmjM3T, were selected as inoculum for seed coating. Two planting experiments were carried out in consecutive years under natural conditions in areas with edapho-climatic characteristics identical to those sustaining natural Lmj populations, and successful reproduction of the plant was achieved. The relevant conclusion from these assays was that the successful reproductive cycle was absolutely dependent on seedling inoculation with effective bradyrhizobia The forth topic deep into the analysis of the genomic of Lmj representative strains. To this end, draft genomic sequences of selected Lmj strains and type strains of Bradyrhizobium spp. were assembled. The comparison analysis of the draft genomic sequences of Lmj strains and related Bradyrhizobium species grouped in Clade I, revealed a high genomic homology among them, and allowed the definition of five potentially new species of Lmj nodulating bacteria. Also, based on the available draft genomic sequences, only three clusters of nod, fix and nif genes from Lmj strains were identified and showed to define a new symbiotic lineage, distant from that of B. canariense and B. japonicum bv. genistearum. The low diversity exhibited by the phylogenetic analysis of symbiotic genes contrast with the large diversity of strains as regards the housekeeping genes analyzed. Besides, the genomic analysis of a Lupinus angustifolius strain ISLU101, revealed the presence of an extrachromosomal replication origin homologous to repABC cluster from plasmid present in Bradyrhizobium spp BTAi1. This repABC cluster gene sequence allowed the identification of extrachromosomic replication origin in 19 out of 72 Bradyrhizobium strains from Lupinus spp., a highly significant result since the absence of plasmids in the Bradyrhizobium genus was traditionally assumed. The repABC gene sequences of these strains grouped them in a unique monophyletic group, related to B. sp. BTAi1 plasmid, but differentiated from the repABC gene cluster of plasmids in fast growing rhizobium strains. The last topic was focused on characterization of type III secreted effectors present in Lmj endosymbiotic bacteria. Type III secretion systems (T3SS) are specialized protein export machineries which can deliver effector proteins into plant cells. The presence of T3SS in rhizobia has frequently been related to the symbiotic nodulation host-range and may have a beneficial or detrimental effect on the symbiosis with legumes. In this context, the presence of T3SS in genomes of nine Lmj strains was investigated, and it was shown the presence of clusters encoding NopE type III-secreted protein similar to the NopE1 and NopE2 of B. diazoefficiens USDA 110T. The putative NopE protein of LmjC strain is at present being characterized regarding its structure and function.

Alkaline-mediated differential interaction (AMDI): A simple automatable single-nucleotide polymorphism assay

The key requirements for high-throughput single-nucleotide polymorphism (SNP) typing of DNA samples in large-scale disease case-control studies are automatability, simplicity, and robustness, coupled with minimal cost. In this paper we describe a fluorescence technique for the detection of SNPs that have been amplified by using the amplification refractory mutation system (ARMS)-PCR procedure. Its performance was evaluated using 32 sequence-specific primer mixes to assign the HLA-DRB alleles to 80 lymphoblastoid cell line DNAs chosen from our database for their diversity. All had been typed previously by alternative methods, either direct sequencing or gel electrophoresis. We believe the detection system that we call AMDI (alkaline-mediated differential interaction) satisfies the above criteria and is suitable for general high-throughput SNP typing.

Vps41p Function in the Alkaline Phosphatase Pathway Requires Homo-oligomerization and Interaction with AP-3 through Two Distinct Domains

Transport of proteins through the ALP (alkaline phosphatase) pathway to the vacuole requires the function of the AP-3 adaptor complex and Vps41p. However, unlike other adaptor protein–dependent pathways, the ALP pathway has not been shown to require additional accessory proteins or coat proteins, such as membrane recruitment factors or clathrin. Two independent genetic approaches have been used to identify new mutants that affect transport through the ALP pathway. These screens yielded new mutants in both VPS41 and the four AP-3 subunit genes. Two new VPS41 alleles exhibited phenotypes distinct from null mutants of VPS41, which are defective in vacuolar morphology and protein transport through both the ALP and CPY sorting pathways. The new alleles displayed severe ALP sorting defects, normal vacuolar morphology, and defects in ALP vesicle formation at the Golgi complex. Sequencing analysis of these VPS41 alleles revealed mutations encoding amino acid changes in two distinct domains of Vps41p: a conserved N-terminal domain and a C-terminal clathrin heavy-chain repeat (CHCR) domain. We demonstrate that the N-terminus of Vps41p is required for binding to AP-3, whereas the C-terminal CHCR domain directs homo-oligomerization of Vps41p. These data indicate that a homo-oligomeric form of Vps41p is required for the formation of ALP containing vesicles at the Golgi complex via interactions with AP-3.

A Novel Alkaline α-Galactosidase from Melon Fruit with a Substrate Preference for Raffinose1

The cucurbits translocate the galactosyl-sucrose oligosaccharides raffinose and stachyose, therefore, α-galactosidase (α-d-galactoside galactohydrolase, EC 3.2.1.22) is expected to function as the initial enzyme of photoassimilate catabolism. However, the previously described alkaline α-galactosidase is specific for the tetrasaccharide stachyose, leaving raffinose catabolism in these tissues as an enigma. In this paper we report the partial purification and characterization of three α-galactosidases, including a novel alkaline α-galactosidase (form I) from melon (Cucumis melo) fruit tissue. The form I enzyme showed preferred activity with raffinose and significant activity with stachyose. Other unique characteristics of this enzyme, such as weak product inhibition by galactose (in contrast to the other α-galactosidases, which show stronger product inhibition), also impart physiological significance. Using raffinose and stachyose as substrates in the assays, the activities of the three α-galactosidases (alkaline form I, alkaline form II, and the acid form) were measured at different stages of fruit development. The form I enzyme activity increased during the early stages of ovary development and fruit set, in contrast to the other α-galactosidase enzymes, both of which declined in activity during this period. In the mature, sucrose-accumulating mesocarp, the alkaline form I enzyme was the major α-galactosidase present. We also observed hydrolysis of raffinose at alkaline conditions in enzyme extracts from other cucurbit sink tissues, as well as from young Coleus blumei leaves. Our results suggest different physiological roles for the α-galactosidase forms in the developing cucurbit fruit, and show that the newly discovered enzyme plays a physiologically significant role in photoassimilate partitioning in cucurbit sink tissue.

A molecular sensor system based on genetically engineered alkaline phosphatase.

Binding and signaling proteins based on Escherichia coli alkaline phosphatase (AP; EC 3.1.3.1) were designed for the detection of antibodies. Hybrid proteins were constructed by using wild-type AP and point mutants of AP [Asp-101 --> Ser (D101S) and Asp-153 --> Gly (D153G)]. The binding function of the hybrid proteins is provided by a peptide epitope inserted between amino acids 407 and 408 in AP. Binding of anti-epitope antibodies to the hybrid proteins modulates the enzyme activity of the hybrids; upon antibody binding, enzyme activity can increase to as much as 300% of the level of activity in the absence of antibody or can decrease as much as 40%, depending on the presence or absence of the point mutations in AP. The fact that modulation is altered from inhibition to activation by single amino acid changes in the active site of AP suggests that the mechanism for modulation is due to structural alterations upon antibody binding. Modulation is a general phenomenon. The properties of the system are demonstrated by using two epitopes, one from the V3 loop of human immunodeficiency virus type 1 gp120 protein and one from hepatitis C virus core protein, and corresponding monoclonal antibodies. The trend of modulation is consistent for all hybrids; those in wild-type AP are inhibited by antibody, while those in the AP mutants are activated by antibody. This demonstrates that modulation of enzyme activity of the AP-epitope hybrid proteins is not specific to either a particular epitope sequence or a particular antibody-epitope combination.

Geologia e petrologia da ilha de São Sebastião (Estado de São Paulo)

A ilha de São Sebastião consta principalmente de rochas alcalinas que formam um maciço de 300 km2 aproximadamente, constituindo o terceiro em área no Brasil. Apresenta-se em um "stock" alongado segundo NE-SW, encaixado em estruturas de gnais. As formações geológicas encontradas consistem em 1 - Granitos e Gnais (ARQUEANO), 2 - Eruptivas básicas (RÉTICO), 3 - Eruptivas alcalinas (JURÁSSICO) e 4 - Depósitos recentes (HOLOCENO). O método de estudo empregado foi o petrográfico e a coluna geológica estabelecida em base de dados petrográficos, tectônicos e fisiográficos. O arqueano é determinado por definição dos seus tipos petrográficos (1- gnais facoidal, 2- oligoclásio-gnais, 3- hornblenda-gnais, 4- biotita-gnais e 5- microlina-granito) idênticos aos concorrentes no considerado arqueano do Brasil meridional. O triássico (rético) é conferido às rochas básicas (diabásios e basaltos) pela sua semelhança tectônica e petrográfica com as congêneres que cortam de maneira semelhante o arqueano no continente. A "mise-en-place" das eruptivas alcalinas (1- Nordmarkito, 2- Biotita-pulaskito, 3- Pulaskito, 4- Nefelina-sienito, 5- Foiaito, 6- Essexito-foiaito, 7- Essexito e 8- Teralito) pode ser considerada jurássica devido suas relações com as eruptivas básicas referidas réticas, pois na praia do Bonete (foto 14) observa-se um dique de nordmarkito cortando outro de diabásio. As eruptivas quartzo-dioríticas (quartzo-microdiorito e quartzo-andesito) cortam as alcalinas no cume do Zabumba, indicando sua idade mais moderna que estas. Além deste fato, preenchem linhas de fraturas tectônicas recentes, como as falhas ao longo do canal de São Sebastião, indicando que a topografia deveria ser a mesma que a atual para permitir rios efusivos ao nível do canal ou que pelo menos toda a zona de extrusão estivesse, como hoje está, em superfície. Os depósitos aluviais marinhos e continentais são considerados recentes, (holocênicos) pelo favor da topografia onde se dispõe, ocupando o fundo os vales e os bordos do atual modelado costeiro, idade esta conferida em base fisiográfica. A tectônica que afetou a ilha de São Sebastião participa da que atuou em todo o litoral meridional brasileiro. Pode-se distinguir duas fases distintas: na primeira ocorreram as erupções básicas e as alcalinas subsidiárias e na segunda deram-se os falhamentos escalonados em blocos basculados para NW, com as fraturas de tensão preenchidas pelas eruptivas quartzo-dioríticas. Toda a atividade tectônica foi regulada pela direção NE-SW privilegiada da estrutura do arqueano, correspondente a antigos eixos dos dobramentos laurencianos e huronianos. A geomorfologia da ilha consta de uma antiga superfície de erosão rematada até a senilidade, - o peneplano cretáceo, hoje reduzida às cristas culminares do maciço alcalino e às satélites das estruturas gnáissicas, desnivelada pelo falhamento em blocos e ligeiramente adernada para NW devido ao basculamento. Ao lado desta topografia vestigial existe o modelado atual da ilha caracterizado por uma juventude do estágio evolutivo. Esta escultura foi inaugurada com os últimos levantamentos epirogênicos que ascenderam as eruptivas alcalinas plutônicas a mais de 1.300 m sobre o nível do mar. O modelado costeiro apresenta uma costa típica de submergência com esculturas em rias, no estágio da juventude. A presença de terraceamentos marinhos de abrasão, atualmente elevados cerca de 20 a 30 m, lembra as oscilações epirogênicas ou eustáticas do litoral.

Activation of polymer blend carbon nanofibres by alkaline hydroxides and their hydrogen storage performances

In the present work we study the hydroxide activation (NaOH and KOH) of phenol-formaldehyde resin derived CNFs prepared by a polymer blend technique to prepare highly porous activated carbon nanofibres (ACNFs). Morphology and textural characteristics of these ACNFs were studied and their hydrogen storage capacities at 77 K (at 0.1 MPa and at high pressures up to 4 MPa) were assessed, and compared, with reported capacities of other porous carbon materials. Phenol-formaldehyde resin derived carbon fibres were successfully activated with these two alkaline hydroxides rendering highly microporous ACNFs with reasonable good activation process yields up to 47 wt.% compared to 7 wt.% yields from steam activation for similar surface areas of 1500 m2/g or higher. These nano-sized activated carbons present interesting H2 storage capacities at 77 K which are comparable, or even higher, to other high quality microporous carbon materials. This observation is due, in part, to their nano-sized diameters allowing to enhance their packing densities to 0.71 g/cm3 and hence their resulting hydrogen storage capacities.

New insights on the direct activation of isotropic petroleum pitch by alkaline hydroxides

The paper provides interesting evidences that a low softening point isotropic petroleum pitch can be used as a good carbon precursor for the preparation of activated carbons. The activation is carried out by KOH and/or NaOH and the resulting activated carbons present well developed porosity. Such hydroxide activations can be done directly on the pristine petroleum pitch (P) or on the pitch that has been submitted to an air stabilisation followed by a N2 heat treatment (TAN). In general, KOH activation produces better results than NaOH, both in terms of porosity and yield, the results obtained for the activation of TAN being impressive because of the good porosity developments and high yields reached. The different treatments carried out over the petroleum pitch precursor clearly show that they significantly influence the extent of microporosity development. This is due to different changes occurring in the porous structure of the precursor as a function of the treatment carried out. The efficiency of the activation process increases as the mesophase content of the precursor decreases, as well as the mesophase formation during the activation process is avoided.

On the origin of the high capacitance of nitrogen-containing carbon nanotubes in acidic and alkaline electrolytes

The synthesis of nitrogenated carbon nanotubes (N-CNTs) with up to 6.1 wt% N, via the use of pyridine as the nitrogen containing carbon precursor, can provide a facile route to significantly enhance the low intrinsic specific capacitance of carbon nanotubes. The nitrogen functionalities determine this, at least, five-fold increase of the specific capacitance.

Pt- and Ru-Doped SnO2–Sb Anodes with High Stability in Alkaline Medium

Different Pt- and Ru-doped Ti/SnO2–Sb electrodes were synthesized by thermal decomposition. The effect of the gradual substitution of Sb by Ru in the nominal composition on the physicochemical and electrochemical properties were evaluated. The electrochemical stability of the electrodes was estimated from accelerated tests at 0.5 A cm–2 in 1 M NaOH. Both as-synthesized and deactivated electrodes were thoroughly characterized by scanning electron microscopy (SEM), energy-dispersive X-ray microanalysis (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction analysis (XRD). The incorporation of a small amount (about 3 at. %) of both Pt and Ru into the SnO2–Sb electrodes produced a 400-times increase in their service life in alkaline medium, with no remarkable change in the electrocatalysis of the oxygen evolution reaction (OER). It is concluded that the deactivation of the electrodes is promoted by alkaline dissolution of metal species and coating detachment at high potentials. The introduction of Pt has a coating compacting effect, and Ru(IV), at low amounts until 9.75 at. %, replaces the Sn(IV) cations in the rutile-like SnO2 structure to form a solid solution that strongly increases the stability of the electrodes. The observed Ru segregation and decreased stability for larger Ru contents (x > 9.75 at. %), together with the selective dissolution of Ru after deactivation, suggest that the formation of a homogeneous (RuδSn1−δ)O2 single-phase is crucial for the stabilization of these electrodes.

Evidence of Local pH Changes during Ethanol Oxidation at Pt Electrodes in Alkaline Media

Local changes of the interfacial pH can significantly affect the rate and mechanism during the course of an electrodic reaction. For instance, different pH values will have a significant effect on the equilibrium properties of both solution and surface species, altering the reactions kinetics. Ethanol oxidation at platinum electrodes in alkaline media involves the fast consumption of OH− species that will change the local pH at the electrode surface, decreasing the reaction rate. In this study, the local pH change during ethanol oxidation in alkaline media is accomplished by using rotating ring-disc electrode (RRDE) experiments. The current at the ring when polarized at the onset of hydrogen evolution serves as a measure of the local pH in the vicinity of the electrode. The results show that the current at the ring at 0.1 V (vs. RHE) becomes more negative during ethanol oxidation, owing to a change in the equilibrium potential of the hydrogen evolution reaction caused by a change in the local pH.

On the behavior of the Pt(1 0 0) and vicinal surfaces in alkaline media

We address in this paper a voltammetric study of the charge transfer processes characteristic of Pt(1 0 0) and vicinal surfaces in alkaline media. The electrochemical behavior of a series of stepped surfaces of the type Pt(S)[n(1 0 0) × (1 1 1)] has been characterized using cyclic voltammetry at different pHs, charge displacement measurements and FTIR experiments for adsorbed CO. The results from these techniques allow assigning the different peaks appearing in the voltammogram to hydrogen and/or OH adsorption on the different sites of these surfaces, namely, terrace and step sites. Additionally, the potential of zero total charge (pztc) of the electrodes was determined. The resulting pztc values shift to more negative values when the step density increases on the surface up to n = 5. FTIR spectroscopy experiments have been used to monitor the adsorption of CO on the different surfaces as well as the consequent CO oxidation, accompanying a positive potential sweep. The oxidation of adsorbed CO on (1 0 0) terraces is catalyzed by the presence of the (1 1 1) steps. The FTIR spectra revealed that CO is mostly bonded in bridge configuration at low potentials interconverting to on-top when the electrode potential is increased.

Performance Assessment of a Polymer Electrolyte Membrane Electrochemical Reactor under Alkaline Conditions – A Case Study with the Electrooxidation of Alcohols

A novel polymer electrolyte membrane electrochemical reactor (PEMER) configuration has been employed for the direct electrooxidation of propargyl alcohol (PGA), a model primary alcohol, towards its carboxylic acid derivatives in alkaline medium. The PEMER configuration comprised of an anode and cathode based on nanoparticulate Ni and Pt electrocatalysts, respectively, supported on carbonaceous substrates. The electrooxidation of PGA was performed in 1.0 M NaOH, where a cathode based on a gas diffusion electrode was manufactured for the reduction of oxygen in alkaline conditions. The performance of a novel alkaline anion-exchange membrane based on Chitosan (CS) and Poly(vinyl) alcohol (PVA) in a 50:50 composition ratio doped with a 5 wt.% of poly (4-vinylpyridine) organic ionomer cross-linked, methyl chloride quaternary salt resin (4VP) was assessed as solid polymer electrolyte. The influence of 4VP anionic ionomer loading of 7, 12 and 20 wt.% incorporated into the electrocatalytic layers was examined by SEM and cyclic voltammetry (CV) upon the optimisation of the electroactive area, the mechanical stability and cohesion of the catalytic ink onto the carbonaceous substrate for both electrodes. The performance of the 4VP/CS:PVA membrane was compared with the commercial alkaline anion-exchange membrane FAA −a membrane generally used in direct alcohol alkaline fuel cells- in terms of polarisation plots in alkaline conditions. Furthermore, preparative electrolyses of the electrooxidation of PGA was performed under alkaline conditions of 1 M NaOH at constant current density of 20 mA cm−2 using a PEMER configuration to provide proof of the principle of the feasibility of the electrooxidation of other alcohols in alkaline media. PGA conversion to Z isomers of 3-(2-propynoxy)-2-propenoic acid (Z-PPA) was circa 0.77, with average current efficiency of 0.32. Alkaline stability of the membranes within the PEMER configuration was finally evaluated after the electrooxidation of PGA.

Estimate from Josiah Bemis to John Lowell and Loammi Baldwin for Chelmsford granite, [ca. 1813]

Bemis, responding to an advertisement from Lowell and Baldwin requesting bids for building materials, outlines his proposal for using Chelmsford granite for the construction of University Hall. Bemis lists 12 stipulations in his proposal including costs per bricks, techniques for constructing the upper storeys, and labor costs.