Characterisation of densification temperature in rotational moulding

The temperature at which densification ends for a range of blends comprising a metallocene catalysed medium density polyethylene (PE) in two different physical forms (powder and micropellets) were investigated using a novel data acquisition system (TP Picture®), developed by Total Petrochemicals [1]. The various blends were subsequently rotomoulded and test specimens prepared for mechanical analysis to establish the relationship between densification rate and bubble size / distribution on the part properties. The micropellets exhibited more rapid bubble removal times than powder.

Calibration of time of flight detectors using laser-driven neutron source

Calibration of three scintillators (EJ232Q, BC422Q, and EJ410) in a time-of-flight arrangement using a laser drive-neutron source is presented. The three plastic scintillator detectors were calibrated with gamma insensitive bubble detector spectrometers, which were absolutely calibrated over a wide range of neutron energies ranging from sub-MeV to 20 MeV. A typical set of data obtained simultaneously by the detectors is shown, measuring the neutron spectrum emitted from a petawatt laser irradiated thin foil.

The direction of media influence: Real-estate news and the stock market

This paper uses a novel identification strategy to test the influence of news media on the stock market. Because the stock market does not impact the media coverage of the housing market, a relationship between real-estate news and shares of companies engaged in the housing market is attributable media influence. I find that the content of reporting exhibits a significant relationship with stock returns, and the amount of news with the number of trades. These relationships exist even after controlling for known risk factors, housing market performance and intra-week correlation. This finding is consistent with the function of the media as a source of information and sentiment in financial markets.

Laser-fabricated PET-Ti Hybrid Joints for Medical Device Applications

Currently, micro-joining of plastic parts to metal parts in medical devices is achieved by using medical adhesives, For example, pacemakers, defibrillators and neurological stimulators are designed using silicone adhesive to seal the joint between the polyurethane connector module and the titanium can [1]. Nevertheless, the use of adhesive is problematic because it requires a long time to cure and has high tendency to produce leachable products which might be harmful to the human body. An alternative for directly joining plastics to metal without adhesive is therefore required. Laser transmission joining (LTJ) is growing in importance, and has the potential to gain the niche in micro-fabrication of plastics-metal hybrid joints for medical device applications. The possibility of directly joining plastics to metal by LTJ technique have been demonstrated by a number of studies in recent literature [2]. The widely-accepted understanding of LTJ between plastics and metal is that generation and rapid expansion of micro-bubbles at the plastics-metal interface exert high local pressure to press the melted plastics towards the metal surface features during the laser processing [2]. This subsequently creates the plastics-metal hybrid joint by the mechanisms of mechanical interlocking as well as chemical and physical bonds between the plastics and metal surfaces. Although the micro-bubbles can help promote the mechanical interlocking effect to increase the joint strength, the creation of bubble is a random and complex process depending on the complicated interactions between the laser intensity, thermal degradation properties of plastics, surface temperature and topographical features of metal. In an ideal situation, it is desirable to create the hybrid plastics-metal joint without bubbles. However, the mechanical performance of the hybrid plastics-metal joint without bubbles is still unknown, and systematic comparison between the hybrid joints with and without bubbles is lacking in literature. This becomes the objective of this study. In this work, the laser process parameters were carefully chosen from a preliminary study, such that different hybrid joints: with and without bubbles can be produced and compared. Biocompatible PET and commercially pure Ti were selected as materials for laser joining.

Gas liquid equilibria at high pressures

Este trabalho tem como objectivo a medição da solubilidade de gases em líquidos a altas pressões. Para a realização experimental foi usada uma célula de altas pressões de volume variável e um método de observação directa para a detecção das transições de fase. As condições usadas neste trabalho experimental foram temperaturas entre 276.00 e 373.15 K e pressões ate 100 MPa. Numa primeira fase foram efectuadas medições de solubilidade de metano em anilina pura e para uma solução aquosa de composição mássica igual a 5% em anilina. A anilina é fundamentalmente usada em processos como a produção de borracha, de poliuretanos, pigmentos e tintas, fármacos, herbicidas e fungicidas. É usualmente produzida através de processos de redução do nitrobenzeno por reacção com o HCl. De facto, esta síntese é um processo químico complexo onde um grande número de processos compete entre si. Alterações nas condições do processo com a possível formação de produtos intermediários podem afectar a eficiência do processo. Para a sua melhoria foi sugerido que o hidrogénio usado fosse simultaneamente produzido e gasto no reactor principal. Neste caso e para a produção do mesmo, era necessário adicionar metano e água ao reactor. Tendo por base a ideia de que as reacções onde o hidrogénio é reagente e produto ocorrem em simultâneo, torna-se clara a importância do estudo da solubilidade do metano em anilina pura e em soluções aquosas desta. Numa segunda fase foi estudada a solubilidade do dióxido de carbono em soluções aquosas de tri-iso-butil(metil)fosfónio tosilato, com composições molares são de 4, 8 e 12% em líquido iónico. Este pertencente à família dos fosfónios. Possui uma viscosidade e densidade elevadas, é térmica e quimicamente estável e ainda possui uma elevada polaridade. Apresenta uma miscibilidade completa em água e nos solventes mais usuais, como o diclorometano e tolueno, não sendo no entanto míscivel em hexano. O tri-isobutil( metil)fosfónium tosilato é usado como solvente nos processos de hidroformilação de olefinas e ainda em processos de captura e conversão de dióxido de carbono. Neste trabalho experimental, a temperatura e a pressão foram inicialmente aumentadas até o sistema atingir o equilíbrio. A pressão é diminuída lentamente até se verificar o aparecimento/desaparecimento da última bolha de gás. A pressão à qual a última bolha de gás desaparece representa a pressão de equilíbrio para aquela temperatura. Este procedimento foi efectuado para vários sistemas e várias temperaturas.

Estimating depth and explosive charge weight for an extremely shallow underwater explosion of the ROKS Cheonan sinking in the Yellow Sea

We estimated the detonation depth and net explosive weight for a very shallow underwater explosion using cutoff frequencies and spectral analysis. With detonation depth and a bubble pulse the net explosive weight for a shallow underwater explosion could simply be determined. The ray trace modeling confirms the detonation depth as a source of the hydroacoustic wave propagation in a shallow channel. We found cutoff frequencies of the reflection off the ocean bottom to be 8.5 Hz, 25 Hz, and 43 Hz while the cutoff frequency of the reflection off the free surface to be 45 Hz including 1.01 Hz for the bubble pulse, and also found the cutoff frequency of surface reflection to well fit the ray-trace modeling. We also attempted to corroborate our findings using a 3D bubble shape modeling and boundary element method. Our findings led us to the net explosive weight of the underwater explosion offshore of Baengnyeong-do for the ROKS Cheonan sinking to be approximately 136 kg TNT at a depth of about 8 m within an ocean depth of around 44 m. © 2015 Elsevier B.V.

Descriptive acoustic analysis of a newly-discovered marine seep

Senior thesis written for Oceanography 445

The challenge and response to global tourism in the post-modern era: the commodification, reconfiguration and mutual transformation of Habana Vieja, Cuba

There is a growing literature on the symbolic and cultural meanings of tourism and the ways in which cities are increasingly competing for tourists through the promotion of cultural assets and different forms of spectacle in the `tourist bubble'. To date, research on the role and impact of tourism in cities has largely been confined to those in Western, post-industrial economies. This paper examines the growth of cultural tourism in the central area of Havana, Cuba, and explores the range of unique, devolved, state-owned enterprises that are attempting to use tourism as a funding mechanism to achieve improvements in the social and cultural fabric of the city for the benefit of residents. The paper concludes with an assessment of the implications of this example for our understanding of how the pressures for restructuring and commodification can be moderated at the city level. Copyright 2008 SAGE Publications. All rights reserved. Not for commercial use or unauthorized distribution.

Consumer confidence indices and stock markets’ meltdowns

Consumer confidence indices (CCIs) are a closely monitored barometer of countries’ economic health and an informative forecasting tool. Using European and US data, we provide a case study of the two recent stock market meltdowns (the post-dotcom bubble correction of 2000–2002 and the 2007–2009 decline at the beginning of the financial crisis) to contribute to the discussion on their appropriateness as proxies for stock markets’ investor sentiment. Investor sentiment should positively covary with stock market movements (DeLong, Shleifer, Summers, and Waldmann 1990); however, we find that the CCI–stock market relationship is not universally positive.We also do not find support for the information effect documented in the previous literature, but identify a more subtle relationship between consumer expectations about future household finances and stock market fluctuations.

Management consulting Winning

A few decades ago, global management consulting was considered to be one of the most attractive industries due to its abnormal high profit margins and above-average growth rates. However, after the dot-com bubble in 2000 and the last global financial crisis, firms folded and growth rates declined sharply. In an attempt to overcome the uncertainty and information volatility, internationalization is commonly cited as a good strategy. WMC, a Portuguese SME founded in 2012, has now decided to expand its management consulting services. Therefore, a scoring model was created to assess selected European countries’ attractiveness taking into consideration macro and microeconomic data. Results show that Spain is the best option at the moment, mainly because it is where the company has the larger number of projects already developed and is more likely to leverage its network.

Deflation and monetary policy: A look into Japan and the Euro Area

With more than two decades of weak economic performance since the bubble burst in the ‘90s, the Japanese deflationary scenario has become the economic fate every developed economy fears to become. As the euro area continues to experience sustained low inflation, studying the Japanese monetary policy may shed light on how to prevent persistent deflation. Using an SVAR methodology to understand the monetary transmission mechanism, we find some evidence that the euro area may possess characteristics that would eventually lead to a deflationary scenario. The extent of whether it would suffer the same Japanese fate would depend on how macroeconomic policies are timely coordinated as a response to its liquidity problem and increasing public debt across member states.

Modeling reaction kinetics and mass transfer in ozonation in water solutions

This dissertation is based on four articles dealing with modeling of ozonation. The literature part of this considers some models for hydrodynamics in bubble column simulation. A literature review of methods for obtaining mass transfer coefficients is presented. The methods presented to obtain mass transfer are general models and can be applied to any gas-liquid system. Ozonation reaction models and methods for obtaining stoichiometric coefficients and reaction rate coefficients for ozonation reactions are discussed in the final section of the literature part. In the first article, ozone gas-liquid mass transfer into water in a bubble column was investigated for different pH values. A more general method for estimation of mass transfer and Henry’s coefficient was developed from the Beltrán method. The ozone volumetric mass transfer coefficient and the Henry’s coefficient were determined simultaneously by parameter estimation using a nonlinear optimization method. A minor dependence of the Henry’s law constant on pH was detected at the pH range 4 - 9. In the second article, a new method using the axial dispersion model for estimation of ozone self-decomposition kinetics in a semi-batch bubble column reactor was developed. The reaction rate coefficients for literature equations of ozone decomposition and the gas phase dispersion coefficient were estimated and compared with the literature data. The reaction order in the pH range 7-10 with respect to ozone 1.12 and 0.51 the hydroxyl ion were obtained, which is in good agreement with literature. The model parameters were determined by parameter estimation using a nonlinear optimization method. Sensitivity analysis was conducted using object function method to obtain information about the reliability and identifiability of the estimated parameters. In the third article, the reaction rate coefficients and the stoichiometric coefficients in the reaction of ozone with the model component p-nitrophenol were estimated at low pH of water using nonlinear optimization. A novel method for estimation of multireaction model parameters in ozonation was developed. In this method the concentration of unknown intermediate compounds is presented as a residual COD (chemical oxygen demand) calculated from the measured COD and the theoretical COD for the known species. The decomposition rate of p-nitrophenol on the pathway producing hydroquinone was found to be about two times faster than the p-nitrophenol decomposition rate on the pathway producing 4- nitrocatechol. In the fourth article, the reaction kinetics of p-nitrophenol ozonation was studied in a bubble column at pH 2. Using the new reaction kinetic model presented in the previous article, the reaction kinetic parameters, rate coefficients, and stoichiometric coefficients as well as the mass transfer coefficient were estimated with nonlinear estimation. The decomposition rate of pnitrophenol was found to be equal both on the pathway producing hydroquinone and on the path way producing 4-nitrocathecol. Comparison of the rate coefficients with the case at initial pH 5 indicates that the p-nitrophenol degradation producing 4- nitrocathecol is more selective towards molecular ozone than the reaction producing hydroquinone. The identifiability and reliability of the estimated parameters were analyzed with the Marcov chain Monte Carlo (MCMC) method. @All rights reserved. No part of the publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission of the author.

Quelle régulation pour l’arrêt d’un protocole de recherche clinique de thérapie génique somatique ? État des lieux auprès des cliniciens-chercheurs européens

Depuis 2002, le débat sur les risques associés à la thérapie génique est initié suite à l’annonce que deux enfants inclus dans un essai thérapeutique impliquant une thérapie génique ont développé des effets indésirables important. En Janvier 2005, le débat sur les risques reprit suite à l’interruption du protocole sur les enfants bulle du Pr Fischer à l’hôpital Necker de Paris. Nous avons donc étudié le processus impliqué ainsi que la réflexion éthique associée aux décisions d’arrêt de protocole de recherche. Notre travail a été mené par une équipe pluridisciplinaire combinant chercheurs en santé, généticiens et éthiciens. Nous avons étudié la participation des chercheurs, des patients, des institutions officielles, des comités d’éthique ainsi que des associations de patients dans le processus de décision d’interruption d’un protocole de recherche.Nous avons également analysé les critères jugés les plus pertinents dans l’arrêt d’un protocole de recherche. Enfin nous avons analysé le point de vue des personnes directement impliquées dans la thérapie génique au moyen d’un questionnaire. Toutes les personnes contactées ont présenté un poster de recherche au congrès de la Société Européenne de Thérapie Génique. 62 personnes d’autant d’équipes de recherche différentes, de 17 pays, sur les 350 contactés ont répondu. Selon eux, la décision d’arrêt d’un protocole de recherche doit être prise suite à une consultation des chercheurs, des patients, du ministère de tutelle, d’une agence nationale de régulation ou d’un comité d’éthique ; la légitimité étant accordée à des décisions prises en commun par les chercheurs, les patients et les comités d’éthique. Les incidents sérieux et de façon plus surprenante, les incidents moins graves sont jugés comme étant des critères suffisants pour interrompre un essai. Nous avons fini par analyser les conséquences éthiques, telles que balance bénéfice/risque, processus de régulation ou responsabilité, de ces critères sur l’arrêt d’un protocole de recherche.

Recherche d’étoiles jeunes de faible masse dans le voisinage solaire

Formées lors de l’effondrement gravitationnel d’un nuage de gaz moléculaire, les étoiles naissantes auront différentes masses variant entre 0.08 et environ 100M . La majorité de la population stellaire de la Galaxie est constituée d’étoiles dont la masse est inférieure à environ 0.6 M . Le dernier évènement de formation stellaire dans le voisinage solaire s’est produit dans la bulle locale il y a au plus 100 millions d’années, vraisemblablement provoqué par le passage d’une onde de choc dans le bras local de la Galaxie. C’est ainsi que se formèrent de jeunes associations d’étoiles dont les membres se caractérisent en particulier par une vitesse spatiale et une position commune dans la Galaxie. Les associations jeunes étant peu densément peuplées et relativement proches du Soleil, leurs membres se font plutôt rares et dispersés sur toute la voûte céleste. Jusqu’à présent, surtout les étoiles les plus massives (brillantes) ont été répertoriées. Les étoiles jeunes de faible masse, constituant la majorité de la population, restent pour la plupart à être identifiées. Les étoiles jeunes de faible masse représentent une population clef pour contraindre les modèles évolutifs des étoiles M et des naines brunes. Elles sont également d’excellentes candidates pour chercher des exoplanètes via les techniques d’imagerie directe. Ce mémoire présente une nouvelle méthode utilisant un modèle cinématique enrichi d’une analyse statistique Bayesienne pour identifier des étoiles jeunes de faible masse dans les associations beta Pictoris, Tucana-Horologium et AB Doradus. À partir d’un échantillon de 1080 étoiles K et M, toutes comportant des indicateurs de jeunesse tels l’émission Halpha et une forte luminosité dans les rayons X, leurs propriétés cinématiques (mouvement propre) et photométriques sont analysées pour en extraire 98 candidates hautement probables membres d’une des trois associations. Une confirmation de leur statut comme membre nécessitera en particulier une mesure de leur vitesse radiale (prédit par notre analyse) et une mesure de la largeur équivalente du lithium à 6708 Å pour mieux contraindre leur âge.