Accelerated aging of thick glass second surface silvered reflectors under sandstorm conditions

Concentrated solar power systems are expected to be sited in desert locations where the direct normal irradiation is above 1800 kWh/m2.year. These systems include large solar collector assemblies, which account for a significant share of the investment cost. Solarreflectors are the main components of these solar collector assemblies and dust/sand storms may affect their reflectance properties, either by soiling or by surface abrasion. While soiling can be reverted by cleaning, surface abrasion is a non reversible degradation.The aim of this project was to study the accelerated aging of second surface silvered thickglass solar reflectors under simulated sandstorm conditions and develop a multi-parametric model which relates the specular reflectance loss to dust/sand storm parameters: wind velocity, dust concentration and time of exposure. This project focused on the degradation caused by surface abrasion.Sandstorm conditions were simulated in a prototype environmental test chamber. Material samples (6cm x 6cm) were exposed to Arizona coarse test dust. The dust stream impactedthese material samples at a perpendicular angle. Both wind velocity and dust concentrationwere maintained at a stable level for each accelerated aging test. The total exposure time in the test chamber was limited to 1 hour. Each accelerated aging test was interrupted every 4 minutes to measure the specular reflectance of the material sample after cleaning.The accelerated aging test campaign had to be aborted prematurely due to a contamination of the dust concentration sensor. A robust multi-parametric degradation model could thus not be derived. The experimental data showed that the specular reflectance loss decreasedeither linearly or exponentially with exposure time, so that a degradation rate could be defined as a single modeling parameter. A correlation should be derived to relate this degradation rate to control parameters such as wind velocity and dust/sand concentration.The sandstorm chamber design would have to be updated before performing further accelerated aging test campaigns. The design upgrade should improve both the reliability of the test equipment and the repeatability of accelerated aging tests. An outdoor exposure test campaign should be launched in deserts to learn more about the intensity, frequencyand duration of dust/sand storms. This campaign would also serve to correlate the results of outdoor exposure tests with accelerated exposure tests in order to develop a robust service lifetime prediction model for different types of solar reflector materials.

Quantum control of electromagnetically induced transparency dispersion via atomic tunneling in a double-well Bose-Einstein condensate

Electromagnetically induced transparency (EIT) is an important tool for controlling light propagation and nonlinear wave mixing in atomic gases with potential applications ranging from quantum computing to table top tests of general relativity. Here we consider EIT in an atomic Bose-Einstein condensate (BEC) trapped in a double-well potential. A weak probe laser propagates through one of the wells and interacts with atoms in a three-level Lambda configuration. The well through which the probe propagates is dressed by a strong control laser with Rabi frequency Omega(mu), as in standard EIT systems. Tunneling between the wells at the frequency g provides a coherent coupling between identical electronic states in the two wells, which leads to the formation of interwell dressed states. The macroscopic interwell coherence of the BEC wave function results in the formation of two ultranarrow absorption resonances for the probe field that are inside of the ordinary EIT transparency window. We show that these new resonances can be interpreted in terms of the interwell dressed states and the formation of a type of dark state involving the control laser and the interwell tunneling. To either side of these ultranarrow resonances there is normal dispersion with very large slope controlled by g. We discuss prospects for observing these ultranarrow resonances and the corresponding regions of high dispersion experimentally.

Dust

TABLE OF CONTENTS I. UNDER THE CARPET Running Away Call Me Sinner Behind the Wheel How It Is Graffiti The Father On My Street II. WINDSTORM The Match The Thunderstorm Cedaredge Locker Plant It's All Life Something In Beige A Wish Peeling Praying

Using consumer search cost and loyalty to explain dispersion in banking fees

Pode-se observar uma considerável dispersão entre os preços que diferentes bancos comerciais no Brasil cobram por um mesmo pacote homogêneo de serviços— dispersão esta que é sustentada ao longo do tempo. Em uma tentativa de replicar esta observação empírica, foi desenvolvido um simples modelo que lança mão do arcabouço da literatura de custos de procura (search costs) e que baseia-se também na lealdade por parte dos consumidores. Em seguida, dados de preços referentes ao setor bancário brasileiro são aplicados ao modelo desenvolvido e alguns exercícios empíricos são então realizados. Esses exercícios permitem que: (i) os custos de procura incorridos pelos consumidores sejam estimados, ao fixar-se os valores dos demais parâmetros e (ii) as correspondentes perdas de peso-morto que surgem como consequência dos custos de procura incorridos pelos consumidores sejam também estimadas. Quando apenas 80% da população é livre para buscar por bancos que cobrem menores tarifas, à taxa de juros mensal de 0,5%, o valor estimado do custo de procura médio incorrido pelos consumidores chega a 1805,80 BRL, sendo a correspondente perda de peso-morto média na ordem de 233,71 BRL por consumidor.

Bias from ignoring price dispersion in demand estimation

Consumers often pay different prices for the same product bought in the same store at the same time. However, the demand estimation literature has ignored that fact using, instead, aggregate measures such as the “list” or average price. In this paper we show that this will lead to biased price coefficients. Furthermore, we perform simple comparative statics simulation exercises for the logit and random coefficient models. In the “list” price case we find that the bias is larger when discounts are higher, proportion of consumers facing discount prices is higher and when consumers are more unwilling to buy the product so that they almost only do it when facing discount. In the average price case we find that the bias is larger when discounts are higher, proportion of consumers that have access to discount are similar to the ones that do not have access and when consumers willingness to buy is very dependent on idiosyncratic shocks. Also bias is less problematic in the average price case in markets with a lot of bargain deals, so that prices are as good as individual. We conclude by proposing ways that the econometrician can reduce this bias using different information that he may have available.

Analysis of the four wave mixing effect (FWM) in a dispersion decreasing fiber (DDF) for a WDM system

We did a numerical investigation of the propagation of short light pulses in the region of 1.55 mu m and the conversion efficiency (CE) for the four wave mixing generation (FWM) of ordinary and dispersion decreasing fibers for use in wavelength division multiplexing (WDM) systems, Our simulations studies three different profiles, linear, hyperbolic. and constant, One conclude that for all the profiles there is decrease of the conversion efficiency with the increase in the channel separation. The hyperbolic profile present a higher efficiency of around 1000 above in magnitude compared with the others profiles at 0.2 nm of channel separation. We calculate the conversion efficiency versus the fiber length for the three profiles. The conversion efficiency for the hyperbolic profile is higher when compared to the constant and linear profiles. The other interesting point of the hyperbolic profile is that the increase of the CE in the beginning of the fiber does not show my oscillation in the CE value (log eta), which was observed for the constant and linear profiles. For all the profiles there is an increase of the conversion efficiency with the increase of the pump power. The compression factor C-i for the generated FWM signal at omega(3) was measured along the DDF's and the constant profile fibers. One can conclude that with the use of decreasing dispersion profile (DDF) fibers one can have a control of the (CE) conversion efficiency and the compression factor of the four wave mixing (FWM) generation in WDM systems. (c) 2005 Elsevier B.V. All rights reserved.

Rheological Properties of a Sodium Bentonite and Lactose Aqueous Dispersion

Aim of this paper is show the viscosity measure of a sodium bentonite-water-lactose mixture and your rheological behaviour. This analysis showed the formation of tridimensional structure type and formation of stratified silicate/lactose, this occurred due to different concentrations of organic products into mixture and due to a difference of rotation during viscosity measument. Formation of networks is a consequence of the attraction between the silicate layers in water-lactose mixture. In the present work aqueous solutions of lactose with concentration of 7%, 5%, 3%, 1% and 0% (wt %) were used.

Dynamics and Heterogeneity of Pb(II) Binding by SiO2 Nanoparticles in an Aqueous Dispersion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

ESR dating of pleistocene mammal teeth and its implications for the biostratigraphy and geological evolution of the coastal plain, Rio Grande do Sul, southern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dispersion of Seeds of Tree Species by the Leaf-Cutting Ant Acromyrmex subterraneus molestans (Hymenoptera: Formicidae) in Vicosa, Minas Gerais State, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Selection of surfactant compounds to enhance the dispersion of Beauveria bassiana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Image processing algorithm for the identification of Martian dust devil tracks in MOC and HiRISE images

This paper presents a method for automatic identification of dust devils tracks in MOC NA and HiRISE images of Mars. The method is based on Mathematical Morphology and is able to successfully process those images despite their difference in spatial resolution or size of the scene. A dataset of 200 images from the surface of Mars representative of the diversity of those track features was considered for developing, testing and evaluating our method, confronting the outputs with reference images made manually. Analysis showed a mean accuracy of about 92%. We also give some examples on how to use the results to get information about dust devils, namelly mean width, main direction of movement and coverage per scene. (c) 2012 Elsevier Ltd. All rights reserved.

Dispersion capacity of Triatoma sherlocki, Triatoma juazeirensis and laboratory-bred hybrids

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)