Synthesis and luminescence properties of organic-inorganic hybrid thin films doped with Eu(III)

In this study, silica-based transparent organic-inorganic hybrid films were prepared by the sol-gel method. Tetraethoxysilane and 3-(trimethoxysilyl)propyl methacrylate were used as the inorganic and organic compounds, respectively. Lanthanide complexes [Eu(phen)(2)]Cl-3 were incorporated into the organically modified silicates (ORMOSIL) and the luminescence properties of the resultant hybrid films (ORMOSIL:[Eu(phen)(2)]Cl-3) were characterized. The relative quantum efficiency was observed higher and the lifetimes were longer in hybrid films than those in pure silica films. Furthermore, thermal stability of hybrid films incorporating various concentration of Eu(III) complex was studied. (C) 2001 Elsevier Science B.V. All rights reserved.

Calculations of cross sections of resonant two-photon transitions to the second excited 4f5d state in Pr3+: Y3Al5O12 using density matrix theory

The density matrix resonant two-photon absorption (TPA) theory applicable to laser crystals doped with rare earth ions is described. Using this theory, resonant TPA cross sections for transitions from the ground state to the second excited state of the 4f5d configuration in cm(4)s Pr3+:Y3Al5O12 are calculated. The peak value of TPA cross section calculated is 2.75 x 10(-50) cm(4)s which is very close to the previous experimental value 4 x 10(-50) cm(4) s. The good agreement of calculated data with measured values demonstrates that the density matrix resonant TPA theory can predict resonant TPA intensity much better than the standard second-order perturbation TPA theory.

High-yield extraction of endohedral rare-earth fullerenes

The technique of high-temperature high-pressure extraction with pyridine has been successfully utilized to extract a wide variety of endohedral rare-earth fullerenes of the type Ln@C-2n (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb). Ln@C-80, Ln@C-82, and Ln(2)@C-80 for most of the rare-earth metals can be produced with high-yield and selectively extracted from the carbon-are evaporation soot. Metallofullerenes containing Sm, Eu, and Yb (which could have +2 oxidation states) are especially difficult to extract. Some possible reasons for the high-yield extraction are discussed. The laser desorption mass spectrometric characterization results indicate a relationship between the extraction yields of metallofullerenes and the oxidation states and ionic radii of the rare-earths.

Sol-gel synthesis and luminescence of Y4Al2O9:RE3+(RE=Eu, Tb)

Y4Al2O9 (YAM) was prepared by a sol-gel process, using yttrium and aluminum citrate complexes as precursors. The sol-gel process produced single-phase YAM at 900 degrees C, as opposed to the conventional solid-state reaction, which led to the formation of other phases, even if at 1600 degrees C. The emission and excitation spectra of Eu3+ and Tb3+ in YAM showed the existence of two luminescence centers, agreeing with the crystal structure of YAM. The spectral properties of the samples are discussed.

A STUDY OF SITE OCCUPATION OF EU-3+ IN ME2Y8(SIO4)6O2 (ME=MG, CA, SR)

Alkaline earth (Mg, Ca. Sr) yttrium silicate oxyapatites doped with Eu3+ show red luminescence with comparable intensity. In this system of phosphors, the Eu3+ ions enter 4f sites and 6h sites simultaneously according to the fluorescence spectra, in which

EFFECT OF THE CONCENTRATION OF THE ER3+ ION ON THE SPECTRAL INTENSITY PARAMETERS OF ER-YAG CRYSTALS

The absorption spectra of Er:YAG (YAG, yttrium-aluminium-garnet) crystals containing different concentrations of the trivalent erbium ion were measured and the spectral intensity parameters were calculated from these experimental spectra using the Judd-Ofelt model. The results indicate that the phenomenological intensity parameters, OMEGA(lambda) (lambda = 2, 4 and 6), vary as a function of the concentration of the Er3+ ion in the Er:YAG crystal, but no variation in the fluorescence-branching ratios as a function of the concentration of the Er3+ ion is found. An empirical formula is proposed to describe the relationship between the spectral intensity parameters and the Er3+ ion concentration in the Er:YAG crystal. The spectral intensity parameters exhibit a maximum in Er:YAG crystals containing about 1-1.5 at.% Er3+ ion. The effect of the Er3+ ion concentration on the spectral intensity parameters may be attributed to the inhomogeneous lattice distortion in the cell of the Er:YAG crystal caused by the dopant erbium ions.

ELECTROCHEMICAL FORMATION OF NI-Y INTERMETALLIC COMPOUND LAYER IN MOLTEN CHLORIDE

The reduction of Y(III) ions in molten chloride is known to be a one-step three electron reaction [1, 2, 3], but a voltammogram of YCl3 in molten LiCl-KCl-NaCl at a nickel electrode shows at least two reduction peaks of Y(III) ions, indicating the possibility of formation of Ni-Y intermetallic compounds. Using a galvanostatic electrolysis method, samples were prepared at several current densities at 450, 500, 600 and 700-degrees-C, respectively, and were identified with X-ray diffraction (XRD) and electron probe microanalysis (EPMA) methods. The results show that Ni2Y, Ni2Y3 and NiY can be produced by electrolysis and Ni2Y is found to be the predominant Ni-Y intermetallic compound under the experimental conditions. Nickel appears to diffuse in Ni2Y faster than yttrium, and the diffusion process is the rate determining step during Ni2Y formation.

APPLICATION OF FACTOR-ANALYSIS TO CORRECTION OF SPECTRAL OVERLAP INTERFERENCE IN INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION-SPECTROMETRY

Correction of spectral overlap interference in inductively coupled plasma atomic emission spectrometry by factor analysis is attempted. For the spectral overlap of two known lines, a data matrix can be composed from one or two pure spectra and a spectrum of the mixture. The data matrix is decomposed into a spectra matrix and a concentration matrix by target transformation factor analysis. The component concentration of interest in a binary mixture is obtained from the concentration matrix and interference from the other component is eliminated. This method is applied to correcting spectral interference of yttrium on the determination of copper and aluminium: satisfactory results are obtained. This method may also be applied to correcting spectral overlap interference for more than two lines. Like other methods of correcting spectral interferences, factor analysis can only be used for additive spectral overlap. Results obtained from measurements on copper/yttrium mixtures with different white noise added show that random errors in measurement data do not significantly affect the results of the correction method.

CRYSTALLIZATION OF RARE-EARTH OXIDE-FILLED POLYPROPYLENE

A study has been made of the crystallization behavior of polypropylene (PP) filled with rare earth oxides under isothermal conditions. These rare earth oxides include lanthanum oxide (La2O3), yttrium oxide (Y2O3), and a mixture of rare earth oxides containing 70% Y2O3 (Y2O3-0.70). A differential scanning calorimeter was used to monitor the energetics of the crystallization process from the melt. During isothermal crystallization, dependence of the relative degree of crystallinity on time was described by the Avrami equation. It has been shown that the addition of any of the three rare earth oxides causes a considerable increase in the overall crystallization rate of PP but does not influence the mechanism of nucleation and growth of the PP crystals. The analysis of kinetic data according to nucleation theories shows that the increase in crystallization rate of PP in the composites is due to the decrease in surface energy of the extremity surfaces. The relative contents of the beta-form in the composites are somewhat higher than that in the plain PP. However, the contents of the beta-form in the plain PP and the composites are all very low relative to those of the alpha-form and the influence of the formation of the beta-form on the crystallization kinetics can be neglected.

THERMODYNAMICS OF COMPLEXATION OF RARE EARTHS BY L-METHIONINE

The protonation constant of the ligand and stability constants of it complexes with rare earths have been determined by potentiometric titration at 25 degrees C and ionic strength mu=0.15 mol - L-1. The results indicate that rare earth elements can form 1:1 complexes with L methionine. There is an apparent "tetrad effect" in this system. Shift of the yttrium position to the vicinity of Gd can he explained by the different polarisation between the Ln(3+) and the ligand. The enthalpy changed (Lambda H-101) of the coordination reaction as represented by the reaction (M + L (sic) ML) here been measured by calorimetric titration, where M and L. denote are eartus and L-Mer respectively. The Lambda G(101) and Delta S-101 of these reaction have been calculated by using Gibbs' equation, Furthermore, the stability of rare earth complexes with L-Met has been compared with that of Ca3+ Zn3+, Fe2+, Fe3+ complexes with L-Met.

SYNTHESIS AND X-RAY CRYSTAL-STRUCTURE OF A MONOPENTAMETHYLCYCLOPENTADIENYL DERIVATIVE OF GADOLINIUM (NA(MU-2-THF)[(C5ME5)GD(THF)]2(MU-2-CL)3(MU-3-CL)2)2.6THF

The reaction of GdCl3 with 1 equiv of NaC5Me5 generates a neutral complex C5Me5GdCl2(THF)3 and a novel complex {Na(mu-2-THF)[(C5Me5)Gd(THF)]2(mu-2-Cl)3(mu-3-Cl)2}2.6THF whixh recrystallizes from THF in triclinic, the space group P1BAR with unit cell dimentions of a 12.183(4), b 13.638(6), c 17.883(7) angstrom, alpha-110.38(3), beta-94.04(3), gamma-99.44(3)-degrees, V 2721.20 angstrom-3 and D(calc) 1.43 g cm-3 for Z = 1. Least-squares refinement of 2170 observed reflections led to a final R value of 0.047. The title complex consists of two Na(mu-2-THF)[(C5Me5)Gd(THF)]2(mu-3-Cl)3(mu-3-Cl)2 units bridged together via two mu-2-THF to Na coordination. Each Gd ion is surrounded by one C5Me5 ligand, two mu-3-Cl, two mu-2-Cl and one THF in a distorted octahedral arrangement with average Gd-C(ring) 2.686(33), Gd-mu-2-Cl 2.724(7), Gd-mu-3-Cl 2.832(8) and Gd-O 2.407(11) angstrom. The sodium ion coordinates to two bridging THF, two mu-2-Cl and two mu-3-Cl to form a distorted octahedron with average Na-mu-2-O, Na-mu-2-Cl and Na-mu-3-Cl of 2.411(21), 2.807(15) and 2.845(12) angstrom, respectively.

SYNTHESIS AND VIBRATIONAL SPECTRUM STUDIES OF RARE EARTH COMPLEXES WITH CYCLOHEXANE CARBOXYLIC ACID

The solid state complexes of trivalent lanthanid, yttrium and scandium with cyclohexane carboxylic acid have been isolated and characterized by IR and Raman spectroscopy. It was found that there are only chelated carboxylate groups in the scandium complex and that there are the chelated, bridged and chelate-bridged carboxylate groups in other rare earth complexes. The former is a mononuclear complex and the latter is a polynuclear polymer. The RE—O coordinate bonds possess the characters of convalent ionic ...

海相碳酸盐－稀土元素共沉淀过程中的分异作用研究

本文主要运用稳定加液－反应系统对海水中方解石和文石形成时稀土元素的共沉淀现象进行了分析，研究了稀土元素在固-液体系中的迁移、转化和分配。进而在对其定量描述的前提下，研究了稀土元素共沉淀对各种反应条件的响应，并对共沉淀行为的机制进行了探讨。 本实验首先运用pH测试、高精度滴定分析等手段测定了实验中的一些基本参数，如[H+]、碱度和[Ca2+]，根据计算结果获得了各碳酸体系要素，并以此为基础建立了5℃、15℃和25℃及pCO2=0.003atm下海水中方解石或文石的沉淀动力学方程。实验结果表明： 1）在各条件下，方解石或文石的沉淀速率（R）和其在海水中过饱和度（Ω）存在很好的线性相关性，即海相碳酸盐的沉淀动力学方程可以通过下面的基本表达式来表示：LogR=k*Log(Ω-1)+b ； 2）过高的稀土元素浓度会对文石或方解石的沉淀产生抑制作用，进而对共沉淀过程中YREEs的分异和分馏产生一定的影响。相比方解石而言，文石的沉淀动力学过程承受稀土元素的干扰能力更强； 3）不同温度下得到的方解石或文石各自的沉淀动力学方程存在明显的差异，表明这一过程受热力学因素控制。相对于方解石而言，温度对文石的沉淀动力学的影响更为显著。 与前人研究不同的是，本实验中YREEs的浓度设定在非常低的范围内，从而避免了过高浓度YREEs对方解石或文石沉淀动力学过程的干扰。在最终的反应液中，各种实验条件非常接近自然环境。有关稀土元素的共沉淀行为主要得出以下定性或定量化结论： 1）YREEs在随方解石或文石的共沉淀过程中，均发生了强烈的分异作用。在方解石实验中，稀土元素的分异系数分布曲线呈凸状分布；而在文石实验中，稀土元素的分异系数随原子序数的增加逐渐减小，遵循镧系收缩的规律。总的来说，稀土元素，尤其轻稀土元素在文石中的分异作用要强于方解石。 2）无论是方解石还是文石，沉淀速率对YREEs的分异作用都有着明显的影响。在方解石中，YREEs的分异系数随沉淀速率的增加呈一致性递减趋势；而在文石中，其分异系数对文石沉淀速率有着截然不同的响应：轻稀土元素（La, Ce, Nd, Sm, Eu, Gd）的分异系数随文石沉淀速率的增加而下降，而重稀土元素（Ho, Y, Tm, Yb , Lu）的分异系数则随文石沉淀速率的增加呈上升趋势。 3）在方解石中YREEs的分异系数之间存在非常好的相互关系，表明这些元素是以成比例的方式参与共沉淀。整个谱系呈现中等强度的分馏，MREE相对于LREE和HREE要更为富集；在文石中由于沉淀速率的作用不同，只有Y、Ho、Yb、Lu等元素的分异系数之间有较好的相互关系。YREEs出现了差异性的强烈分馏，在新生成沉淀中轻稀土元素相对于重稀土元素强烈富集。 4）YREEs在溶液中和碳酸盐晶体表面的碳酸根配位形式对YREEs在共沉淀过程中的分异作用极为重要，YREEs在碳酸盐晶体表面的吸附是整个谱系发生分馏效应的关键环节。对于文石来讲，晶体中有效YREE离子和Ca离子半价大小之间的相近程度是其分馏效应的关键因素；而对于方解石来说，YREEs在方解石晶格中的安置就是其分馏效应的关键控制因子，但在晶格安置中起到关键作用的是YREEs和方解石中O原子之间离子键M-O的键长，而非离子半径。 5）综合YREEs在方解石中的分异作用和分馏效应，我们认为M2(CO3)3-CaCO3和MNa(CO3)2-CaCO3是最为可能的两种固体溶液形成模式。 最为重要的是，对比我们的实验结果与前人在灰岩、叠层石、微生物成因碳酸盐等方解石质载体中的研究成果，两者之间出现了非常好的一致性。我们认为方解石质载体将是重建古海水中稀土元素相关信息的重要工具。相比之下，文石质载体不适合作为类似的载体。

潜山油藏裂缝分布规律研究－－以辽河盆地大民屯凹陷潜山油藏为例

With the example of Damintun Depression, Liaohe Oilfield, different methods to study fracture distribution were propsosed, i.e. combined crop, core, log, with seismic attribute and paleo-stress field to predict fractural reservoir. The following conclusions are drawn: 1. Secondary fracture and dissolution pore are the main reservoir space of fractured reservoir in Damintun buried hills through observing more than 270 meters core in 27 wells. Among them, structural fracture is the main reservoir spcace in Archaean metamorphism whose main mineral are silicates, while dissolution pore and structural fracture are the main reservoir space in Protozoic carbonate which has been proved with high dissolution. Structural fracture is not only the main reservoir space but also the influent path. 2. Actual core observation and log identification proved that the formation of buried hills have the following zone: weathering crust, fracturaed zone and compact zone, among which the weathering crust and fractured zone are the main reservoir. 3. The mineralogical component of rock is the inner factor and the tectonization is the outer factor, which control the development of structural fracture. The content of brittle material in rock influences the development of structural fracture. Dissolution, chemical eluviations, weathering and fill-up affect the development of structural fracture. 4. Basement faults control the distribution of structural fracture in Damintun Depression. The trend of fracture is consistent with that of faults and there is often large-scale fractural zone around faults. 5. Based on log response, the fracture is identified with core observation, imaging well log and ANN, which can provide geological basis for optimized perforation. 6. The methods for predicting fracture with structure restoration, seismic inversion and paleo-stress simulation aiming at different types of buried-hills reservoir, and then the spatial distribution of the fracture and density is obtained, which can provide geological basis for well site adjustment.

中国北方表沙无机碳储量及次生碳酸盐固碳潜力研究

This paper selected the Taklamakan Desert and the Badain Jaran Desert as the research areas, tested the carbonate content of surface-sand samples of dunes using Eijkelkamp carbonate goniophotometer, and analyzed the spatial-distribution characteristics of carbonate and estimated the carbonate-stock and secondary carbonate-stock in 1m depth of surface sand in the Taklamakan Desert and the Badain Jaran Desert. In addition, the paper test XRD, SEM, TDA, stable carbon isotope and radioactive strontium isotope of lacustrine deposits in the Taklamakan Desert and carbonates, such as kunkar, root canal, lacustrine deposits, sinter and calcrete, in the Badain Jaran Desert. Resting on the achievements by our predecessors, it analyzed the mineral-composition differences of the carbonates, calculated the contents of secondary carbonate and, furthermore, evaluated their potential of sequestration of CO2 in the atmosphere. The overall goal of this study was to increase our understanding of soil carbonate in the context of carbon sequestration in the arid region in China. That is, to advance our understanding about whether or not secondary carbonate in desert is a sink for atmospheric CO2. The following viewpoints were obtained: 1 Carbonate contents of surface-sand samples decend from the south to the north of the Taklamakan Desert. The minimum lies in the south and the maxmum in the mid. Carbonate content of surface-sand of megadunes in the Badain Jaran Desert has low value generally in the dune-crest and the base of slope, and large value in the mid. The average of Carbonate contents of all sorts of collected samples in the same area of the Taklamakan Desert has small diffetences. The average is about 9%. 2 Using carbonate contents as key parameters, calculate the carbon-stock of carbonates in 1m depth of surface sand in the Taklamakan Desert and the Badain Jaran Deser.They are 1.13Pg and 0.19 Pg respectively. There are 0.53Pg and 0.088Pg carbon-stock of secondary-carbonates in 1m depth of surface sand in the Taklamakan Desert and the Badain Jaran Desert. 3 Through testing data from XRD （X-ray diffraction）and TAD ( Thermal Analysis Data), the most significant conclusion derived from is that the main mineral ingredient is calcite in different carbonate substances in arid regions, From the SEM(Scanning electron microscopy ) images, can obtains the information about the micro environment of different carbonate forms in which they can grow. 4 Selected gas by termal cracking and traditional phosphoric acid method, their δ13C show that δ13C is a good parameter to indicate the micro environment in which different secondary carbonate forms. From the δ13C of the same type samples, if the redeposit degree is hard, theδ13C is light, the redeposit degree is weak, the δ13C is heave. and the δ13C of the different type samples, δ13C is mainly controlled by the micro environment in which secondary formed. if the procedure is characterized by redeposit and dissolve of marine facies carbonate, δ13C is heavy, it is characterized by CO2 which produced by plant respiration,δ13C is light. 5 From the δ13C of lacustrine deposit in the different grain size, there exsit certain differences in their micro environment and secondary degree among different grain size in the same grade. 6 The secondary carbonate content of lacustrine deposits in Taklimakan Desert is 47.26%. And those of root canal, sinter, calcrete, kunkar, lacustrine deposit and surface sand in Badain Jaran Desert are 91.74%, 78.46%, 76.26%, 87.87%, 85.37%and 46.49%, respectively. Of different grain size samples, the secondary carbonate contents of coarse fraction (20-63μm), sub-coarse fraction (5-20μm) and fine fraction (<5μm) are 80.10%, 47.2%and 50.07%, respectively. 7 There is no obvious relevance betweenδ13C of secondary carbonate and the content of secondary carbonate,theδ13C of secondary carbonate mainly reflects the parameters of secondary process, the content of secondary carbonate reflects difference of secondary degree.. 8 Silicates potentially supply 3.4 pencent calcium source during forming process of lacustrine deposits in Taklimakan Desert. If calcium source is mainly supplied by goundwater, it can be calculated that about 5.18 %, 6.13%, 5.68%, 5.64 % and 6.82% silicates supply calcium source respectively for root canal, kunkar, lacustrine deposit, calcrete and sinter, during the forming process of different kinds of carbonates in Badain Jaran Desert.