998 resultados para Velocidade de pico


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In Brazil, the practice of Soccer is encouraged very early. It is common remark that parents enroll their sons into soccer schools, promoting the involvement of these children in formal practice. However, there are not many studies that assess the effects of this practice in the physical capacities of children. Thus, the question that guides this study is: children who practice soccer systematically present better development of physical, especially agility, coordination and speed? The objective of this study was to compare the performance in velocity tests, agility and coordination of boys of 10 and 11 years, category dentinho or Sub-11, practitioners of soccer in schools and non practicing. The study included male children, born in 1997 and 1998, formed two groups: group of practitioners of soccer and group of non practicing. To belong to the group of practitioners, the child was regularly engaged for at least 1 year, with 1 hour daily and 2 to 3 times per week. The participants of the group of non practicing were not involved in regular practice of soccer and were paired in weight and stature with participants of the group of practitioners of soccer. Each participant was individually assessed in neutral environment and without foreign interference. For the assessment of the agility, was utilized the (shuttle run) test. The race test 30 meters stopped was employed for the assessment of the speed. The test of fiddling between the cones was employed to measure the coordination. The time spent to perform 1 attempt to each test was used for the comparison between groups. These data were treated, initially, by descriptive statistics (mean and standard deviation) and, subsequently, were compared by means of Anova, for independent samples. The significance level was maintained at 5%. Through analysis of the results the conclusion is that the regular practice ...(Complete abstract click electronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The ankle sprains represent the most common injuries in sports and basketball. In this sense, the use of ankle bracing and strength capacity analysis of the ankle evertor and invertor muscles, have been suggested as preventive measures and important tools for identifying risk factors associated with ankle sprains. However, questions still persist as to effect of the use ankle bracing on biomechanical variables related to the stability of the ankle. For this reason, this study aims to analyze the effect of the use of ankle bracing on peak torque (PT) of ankle evertor and invertor muscles and on eccentric evertor/concentric invertor torque ratio (EVEECC/INVCON), during the basketball match-play simulation. Ten healthy college basketball players, without mechanics or functional ankle instability performed a laboratory-based protocol representative of work rates observed during basketball match-play, in two different situations, with and without use of ankle bracing. The test was composed of a succession of intermittent physical effort equally distributed in four periods of 10 minutes each, considering the mechanical and physiological demands of a basketball match-play. Prior to the start of the trial (Evaluation 1) and after 2° (Evaluation 2) and 4° (Evaluation 3) periods, the subjects performed five maximal isokinetic concentric and eccentric contractions of ankle invertor and evertor muscles, separated by two minutes rest, at 60 °/s and 120 °/s. After testing for normality of data distribution with the Shapiro-Wilk test, was used the ANOVA repeated measures for two factors and post-hoc Bonferroni test for comparison of variables between assessments. Was adopted p < 0.05. There was no significant difference for PT and EVEECC/INVCON torque ratio between assessments. There was a decrease in PT EVEECC at 60º/s and 120º/s for the ...(Complete abstract click electronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work is initially based in give a solution to a problem consisting of lifting a load in a warehouse focusing specifically on the solution´s project and comparison of the results obtained following the sequence of the book and comparing these results with the finite elements simulation based on the 3D components modeling. Starting from that was realized the project of the worm gear reducer to solve the problem and makes the work easier. The project consisted basically of the study, project itself and simulation by software of a worm gear reducer and projects steps, starting with the initial problem conditions (to lifting a load up to an specific height at a given time) following all the reducer project sequence, starting by the preliminary draft and electric motor selection using iterative process, material selection, worm gear dimensioning, axles, keyways, bearings and coupling. After that was performed the three dimensional modeling of the components using SolidWorks software and simulating these components using Ansys software. The results show the importance of the CAD in terms of improving project development speed and reducing costs with prototypes

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aims to make the closed loop control of a three phase induction motor, through the integration of the following equipment: a frequency inverter, the actuator system; a programmable logic controller (PLC), the controller; an encoder, the velocity sensor, used as a feedback monitoring the control variable and the three-phase induction motor, the plant to be controlled. The control is performed using a Proportional - Integrative - Derivative (PID) approach. The PLC has a help instruction, which performs the auto adjustment of the controller, that instruction is used and confronted with other adjustment methods. There are several types of methods adjustments to the PID controllers, where the empirical methods are addressed in this work. The system is deployed at the Interface and Electro Electronic Control laboratory in the Universidade Estadual Paulista Júlio Mesquita Filho, Guaratinguetá, São Paulo, then, in the future, this work becomes an experiment to be conducted in the classroom, allowing undergraduate students to develop a greater affinity to the programs used by the PLC as well as studies of undergraduate and graduate works with the help of assembly made

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Existente desde os Jogos Olímpicos da Grécia Antiga, as corridas de velocidade ocupam espaço de destaque dentre as provas do atletismo. Em particular, os 100 metros rasos masculino é a prova cujas particularidades merecem ser investigadas, sobretudo em função das inúmeras alterações ocorridas ao longo dos anos. Por exemplo, a princípio, a corrida de velocidade era disputada nos Jogos Olímpicos da Grécia Antiga, com o nome de stádion ou dromo e com um percurso de 192,27 metros. Com a decadência e a extinção dos Jogos Olímpicos, a corrida de velocidade deixou de ser disputada, retornando em 1896, com o renascimento dos Jogos Olímpicos da Era Moderna. Entretanto, dentre as modificações nas provas do atletismo, as corridas de velocidade passaram a ser de 100 e 400 metros rasos, o bloco de partida passou a ser obrigatório etc. O objetivo desta pesquisa consiste em averiguar as principais modificações ocorridas na prova dos 100 metros rasos masculino, desde a sua origem até os dias atuais. Esta pesquisa, de caráter histórico-bibliográfico, tem a finalidade de resgatar a história da prova dos 100 metros rasos com base na história dos Jogos Olímpicos, verificando as alterações em suas regras básicas, em sua composição e técnicas específicas, a fim de reunir subsídios para o seu ensino em aulas de Educação Física. Com esta pesquisa, esperamos contribuir não apenas com o resgate da história desta ocorridas na prova dos 100 metros rasos masculino, desde a sua origem até os dias atuais. Esta pesquisa, de caráter histórico-bibliográfico, tem a finalidade de resgatar a história da prova dos 100 metros rasos com base na história dos Jogos Olímpicos, verificando as alterações em suas regras básicas, em sua composição e técnicas específicas, a fim de reunir subsídios para o seu ensino em aulas de Educação Física. Com esta pesquisa, esperamos... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introdução – Uma das causas mais prováveis de lesões esportivas está relacionada aos desequilíbrios musculares e a fadiga muscular, que é evidenciada no decorrer de um jogo de futebol, principalmente no final do jogo. Esta pode ser avaliada através da comparação da força de contração máxima antes e após o exercício. A fadiga produzida durante o jogo diminui a força muscular concêntrica e excêntrica de flexores e extensores do joelho podendo aumentar a incidência de lesões. Objetivo - Avaliar o efeito de uma partida sobre o pico de torque funcional e convencional nos músculos isquiotibiais e quadríceps de jogadores de futebol de salão com e sem desequilíbrio muscular. Método – Oito jogadores de futebol de salão do gênero masculino, com idade entre 18 e 24 anos, fizeram três visitas ao laboratório: 1ª foram realizadas a antropometria e adaptação aos equipamentos; 2ª teste máximo no dinamômetro isocinético para determinar a razão do pico de torque funcional e convencional nos músculos isquiotibiais e quadríceps; 3ª idem ao 2ª, após a partida de futebol de salão. Análise estatística – através das médias ± DP dos dados obtidos foi utilizado o teste t para amostras dependentes e o Mann Whitney para comparação do pico de torque antes e após a partida de futebol de salão e para comparação da relação flexor/extensor pré e pós- esforço, respectivamente. Em ambos os testes foram adotado um nível de significância de p < 0,05. Resultados - Não foram encontradas diferenças significantes entre os grupos de atletas com desequilíbrio muscular na perna dominante (GD) e grupo equilíbrio (GE) e para os extensores e flexores do GD e GE nas condições Con60. Através do Mann Whitney foram encontradas diferenças...(Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introdução: A lesão mais comumente encontrada na população ativa é a entorse de tornozelo. Cerca de 40% destes casos continuam a manifestar sensação de instabilidade articular mesmo após a fase aguda da lesão, caracterizando a instabilidade funcional do tornozelo (IFT). A IFT está relacionada com déficits proprioceptivos e redução na capacidade de produção de força e potência muscular. Haja vista que o basquetebol é um esporte com grande incidência de lesões no tornozelo faz-se necessário o entendimento de métodos de avaliação de baixo custo, que possam contribuir para a prevenção deste tipo de lesão em atletas. Objetivo: Nesse sentido, o presente estudo, tem como objetivo identificar os parâmetros de torque, atividade eletromiográfica, senso de reposicionamento articular e a pontuação em teste funcional em jogadoras de basquetebol com tornozelo estável. Correlacionar os valores de torque, atividade eletromiográfica e do senso de reposionamento articular com a pontuação dos testes funcionais em individuos saudáveis. Método: Participaram deste estudo 6 atletas do gênero feminino praticantes do basquetebol com idade entre 18 e 25 anos. As voluntárias realizaram os seguintes testes: torque isocinético concêntrico em inversão (INV) e eversão (EVE) nas velocidades de 60º e 120º, cinco testes funcionais e teste de reposicionamento articular com os ângulos-alvo de 10º e 20º de inversão. Após a verificação da normalidade de distribuição dos dados com o teste Shapiro-Wilk, utilizou-se o teste de Correlação Spearman para verificar a correlação dos testes funcionais com o pico de torque, o sinal EMG e o reposicionamento articular. Resultados: Não foi encontrados resultados esperados no estudo, exceto na correlação negativa para os valores de RMS do TA na velocidade de 120º nas contrações isocinética...(Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A natação é um esporte praticado em meio líquido o que a torna muito dependente da técnica do nadador, pelo fato de apresentar maior resistência quando comparado com o meio terrestre. A força muscular, composição corporal e a técnica do nado são alguns fatores determinantes para a melhora do desempenho esportivo do atleta. Sendo assim, a capacidade de gerar força propulsiva e minimizar a resistência ao meio líquido são altamente influenciadoras do desempenho nesta modalidade. Um dos principais músculos utilizados na propulsão da braçada do nado crawl é o tríceps braquial o qual é responsável pela extensão do cotovelo. O nível de força dos membros dominante e não dominante também pode influenciar no desequilíbrio muscular dos nadadores e consequentemente na propulsão do atleta. Sendo assim, o objetivo deste estudo foi analisar a reprodutibilidade de pico de torque (PT) durante as contrações isométrica e isocinética concêntrica em diferentes velocidades do músculo tríceps braquial nos membros dominante e não dominante em nadadores. Participaram do estudo nadadores velocistas e meio fundistas do gênero masculino, com idade entre 18 e 28 anos, com experiência no mínimo de 3 anos na modalidade. Os voluntários foram solicitados a comparecer no laboratório em 3 ocasiões em dias diferentes. Primeiramente para obter as medidas antropométricas (massa, estatura, envergadura e dobras cutâneas) e logo em seguida foi feita a familiarização ao teste isométrico e isocinético no dinamômetro. Nas próximas visitas os atletas realizaram no dinamômetro isocinético, o teste máximo para determinação do PT da contração isométrica e isocinéticas concêntricas em diferentes velocidades. O procedimento foi realizado duas vezes em dias diferentes. O teste para determinação do PT isométrico e isocinético foi realizado de forma aleatória... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this study was to investigate the influence of previous active static stretch on the isometric peak torque (PT) and rate of force development (RFD) measured from different time intervals from the beginning of muscle contraction. Participated of this study 15 male individuals, apparently healthy, with ages between 18 and 25 years, without regular physical activity practice. The individuals were submitted in different days to the following tests: 1) Familiarization session to the isokinetic dynamometer; 2) Two maximal isometric concentric contractions for knee extensors in isokinetic dynamometer to determine PT and RFD (Control), and; 3) Two active static stretching exercises for the dominant leg extensors (10 x 30 s for each exercise, with 20 s of rest). After the stretching, the isokinetic test was repeated (Post-Stretching). The conditions 2 and 3 were performed in random order. The RFD was considered as the mean slope of the moment-time curve at time intervals of 0-30, 0-50 and 0-100ms relative to the beginning of muscle contraction. It was verified significant reduction for both maximal RFD and PT after the stretching (p < 0.05). At intervals of 0- 30ms, 0-50ms and 0-100ms, the RFD at the conditions with stretching was similar to the RFD without stretching (p > 0.05). At intervals of 0-150ms and 0-200ms, the RFD obtained at the contraction without stretching was significantly higher that that obtained at the contraction with stretching (p < 0.05). It can be concluded that the static stretching, performed with duration of 600 s diminish isometric PT, maximal RFD and RFD measured at late phase (> 100 ms) of muscle contraction.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Due to the rapid development of some species such as pine and eucalyptus and a growing demand for raw materials, timber, there was a need for detailed studies to better use and higher quality in products derived from wood. In order to contribute to to better utilization of wood ,this study aims to analyze the quality of the wood surface after machining Corymbia citrodora around, with varying feed rates (40, 70, 100 mm/mim), shear rate (1.88, 2.19, 2.51 m/s) and with the use of inserts for turning new and used (cemented carbide). 18 were used bodies and each body was made three different assays for each test were a total of 54 tests three replicates. This study will also addres the analysis of power consumption for each of the tests. With the results obtained through experiments, including the surface roughness of parts and power consumption for each test, we try to evaluate the power consumption in machining with the variations in cutting speed and feed, with two tools carbide

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to analyze the effects of unilateral isokinetic strength training at high speed (180°.s-1) of the dominant leg on the rate of force development (RFD) of the contralateral limb. The study included 18 male individuals, apparently healthy, with an average of 23 years, and without regular practice of physical activities. The subjects were divided randomly into two groups: control group (GC) and isokinetic group (GISOC). Assessments were made of the values of peak isometric torque (PT isom) and RFD of both lower limbs in the pre-training. So, the GISOC underwent an isokinetic strength training with high speed (180°.s-1) for 6 weeks, with the dominant leg only and then reassessed. It was found that there was no significant improvement in value of PT isom (p> 0.05), and the RFD for the dominant limb had a significant improvement (p< 0.05) compared to the pre-training and that there was no transfer of values to the contralateral side (p> 0.05). It can be concluded that the isokinetic training at high speed was not enough for significant cross education

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Due to motor difficulties, children with developmental coordination disorder (DCD) doesn't feel motivated to do physical activities, sometimes resulting in a decline of their physical fitness, but it isn't really known for sure the reasons that induct children with DCD to low performances in physical fitness tests, because a lot of tasks that are part of the battery of tests of physical performance are complex in the coordination and/or motor control point of view, like the vertical jump for example. Therefore, the objective of this study was to investigate the factors that induct children with DCD to low performances in physical fitness tests, especially in the vertical jump task. For that, cinematic (duration of the eccentrical phase, duration of the concentrical phase, shift of the mass center and velocity of the mass center), kinetic (potency peak and force peak) and vertical jump performance analysis in two conditions (with the use of arms and without it) were realized in a force platform. The results indicated that children with DCD show a lower performance compared to their peers with typical development (TD), due to a lower potency production