Effects of modern variable frequency drive on the reliability of an old crane induction motor

The work aims to analyze the possibilities of utilizing old crane driving AC induction motors in modern pulse-width-modulated variable frequency drives. Bearing currents and voltage stresses are the two main problems associated with modern IGBT inverters, and they may cause premature failure of an old induction motor. The origins of these two problems are studied. An analysis of the mechanism of bearing failure is proposed. Certain types of bearing currents are considered in detail. The most effective and economical means are chosen for bearing currents mitigation. Transient phenomena of cables and mechanism of over voltages occurring at motor terminals are studied in the work. The weakest places of the stator winding insulation system are shown and recommendations are given considering the mitigation of voltage stresses. Only the most appropriate and cost effective preventative methods are chosen for old motor drives. Rewinding of old motors is also considered.

Power line communication in motor cables of variable-speed electric drives − analysis and

Data transmission between an electric motor and a frequency converter is required in variablespeed electric drives because of sensors installed at the motor. Sensor information can be used for various useful applications to improve the system reliability and its properties. Traditionally, the communication medium is implemented by an additional cabling. However, the costs of the traditional method may be an obstacle to the wider application of data transmission between a motor and a frequency converter. In any case, a power cable is always installed between a motor and a frequency converter for power supply, and hence it may be applied as a communication medium for sensor level data. This thesis considers power line communication (PLC) in inverter-fed motor power cables. The motor cable is studied as a communication channel in the frequency band of 100 kHz−30 MHz. The communication channel and noise characteristics are described. All the individual components included in a variable-speed electric drive are presented in detail. A channel model is developed, and it is verified by measurements. A theoretical channel information capacity analysis is carried out to estimate the opportunities of a communication medium. Suitable communication and forward error correction (FEC) methods are suggested. A general method to implement a broadband and Ethernet-based communication medium between a motor and a frequency converter is proposed. A coupling interface is also developed that allows to install the communication device safely to a three-phase inverter-fed motor power cable. Practical tests are carried out, and the results are analyzed. Possible applications for the proposed method are presented. A speed feedback motor control application is verified in detail by simulations and laboratory tests because of restrictions for the delay in the feedback loop caused by PLC. Other possible applications are discussed at a more general level.

Power Consumption in Carbon Capture and Storage Systems (CCS) and Possibilities to Reduce Power Consumption with Variable Speed Drives

The aim of this master´s thesis is to study which processes increase the auxiliary power consumption in carbon capture and storage processes and if it is possible to reduce the auxiliary power consumption with variable speed drives. Also the cost of carbon capture and storage is studied. Data about auxiliary power consumption in carbon capture is gathered from various studies and estimates made by various research centres. Based on these studies a view is presented how the power auxiliary power consumption is divided between different processes in carbon capture processes. In a literary study, the operation of three basic carbon capture systems is described. Also different methods to transport carbon dioxide and carbon dioxide storage options are described in this section. At the end of the thesis processes that consume most of the auxiliary power are defined and possibilities to reduce the auxiliary power consumption are evaluated. Cost of carbon capture, transport and storage are also evaluated at this point and in the case that the carbon capture and storage systems are fully deployed. According to the results, it can be estimated what are the processes are where variable speed drives can be used and what kind of cost and power consumption reduction could be achieved. Results also show how large a project carbon capture and storage is if it is fully deployed.

HPV & head and neck cancer: a descriptive update

The incidence of head and neck squamous cell carcinoma (HNSCC) has been gradually increasing over the last three decades. Recent data have now attributed a viral aetiology to a subset of head and neck cancers. Several studies indicate that oral human papillomavirus (HPV) infection is likely to be sexually acquired. The dominance of HPV 16 in HPV+ HNSCC is even greater than that seen in cervical carcinoma of total worldwide cases. Strong evidence suggests that HPV+ status is an important prognostic factor associated with a favourable outcome in head and neck cancers. Approximately 30 to 40% of HNSCC patients with present with early stage I/II disease. These patients are treated with curative intent using single modality treatments either radiation or surgery alone. A non-operative approach is favored for patients in which surgery followed by either radiation alone or radiochemotherapy may lead to severe functional impairment. Cetuximab, a humanized mouse anti-EGFR IgG1 monoclonal antibody, improved locoregional control and overall survival in combination with radiotherapy in locally advanced tumours but at the cost of some increased cardiac morbidity and mortality. Finally, the improved prognosis and treatment responses to chemotherapy and radiotherapy by HPV+ tumours may suggest that HPV status detection is required to better plan and individualize patient treatment regimes.

Apolipoprotein E and Recovery from Traumatic Brain Injury

The outcome from traumatic brain injury (TBI) is variable and only partly explained by known prognostic factors. This is especially true for predicting long-term outcome. Genetic factors may influence the brain`s susceptibility to injury or capacity for repair and regeneration. To examine the association of apolipoproteinE (apoE) genotype with long-term outcome, hippocampal volumes and general brain atrophy, we determined the apoE genotype from 61 TBI patients who had been injured over on average 31 years earlier. The long-term outcome was evaluated with repeated neuropsychological testing and by applying various measures of everyday functioning and quality of life. Magnetic resonance imaging (MRI) based volumetric analyses of the hippocampus and lateral ventricles were performed. In the prospective study, the purpose was to examine the association between apoE genotype and visibility of traumatic brain lesions during the first year after TBI and the ability of apoE genotype, the Glasgow Coma Score (GCS), MRI findings and duration of posttraumatic amnesia (PTA) to predict the one-year outcome. Thirty-three patients with TBI were studied and the outcome was evaluated with the Head Injury Symptom Checklist (HISC) and the Glasgow Outcome Scale extended version (GOS-E) scores one year after the injury. MRI and apoE genotyping were carried out. After three decades, neither hippocampal nor lateral ventricle volumes differed significantly in those patients with the apoE ε4 allele vs those without this allele, but the TBI patients with the apoE ε4 allele showed significantly poorer general cognitive level than those without this allele. This decline was wholly accounted for by a subgroup of patients who had developed incident or clinical dementia. In the prospective study the apoE genotype was not associated with visible MRI changes or outcome. The duration of PTA and acute MRI were the best predictors of one-year outcome in TBI. A portion of the TBI patients with the apoE ε4 allele seem to be at risk of long-term cognitive decline. This association may involve mechanisms other than those responsible for the development of brain atrophy. The early MRI and PTA have an important role in assessing the injury severity and prognosis.

Energy efficiency parameters in variable speed drives

The main purpose of this thesis is to measure and evaluate how accurately the current energy saving calculation in ABB’s new variable speed drive ACS850 works. The main topic of this thesis is energy-efficiency parameters. At the beginning of this thesis centrifugal pump, squirrel cage motor and variable speed drive, including some equations related to them, are being introduced. Also methods of throttling control and variable speed drive control of centrifugal pumps are being introduced. These subjects are introduced because the energy saving calculation in ACS850 is related to the centrifugal pumps usually driven by squirrel cage motors. The theory also includes short section about specific energy of pumping. Before measurements the current energy saving calculation of ACS850 is being introduced and analyzed. The measurements part includes introduction of measuring equipment, measurement results, summary and analysis of the measurements. At the end of this thesis a proposal for an improvement to the current energy saving calculation is being introduced and few proposals are made for new energy-efficiency parameters, which could be added to variable speed drives. At the end are also thoughts

Regulating Concessions of Toll Motorways, An Empirical Study on Fixed vs. Variable Term Contracts

Recent theoretical developments on concession contracts for long term infrastructure projects under uncertain demand show the benefits of allowing for flexible term contracts rather than fixing a rigid term. This study presents a simulation to compare both alternatives by using real data from the oldest Spanish toll motorway. For this purpose, we analyze how well the flexible term would have performed instead of the fixed length actually established. Our results show a huge reduction of the term of concession that would have dramatically decreased the firm’s benefits and the user’s overpayment due to the internalization of an unexpected traffic increase.

Regression analysis of compositional data when both the dependent variable and independent variable are components

It is well known that regression analyses involving compositional data need special attention because the data are not of full rank. For a regression analysis where both the dependent and independent variable are components we propose a transformation of the components emphasizing their role as dependent and independent variables. A simple linear regression can be performed on the transformed components. The regression line can be depicted in a ternary diagram facilitating the interpretation of the analysis in terms of components. An exemple with time-budgets illustrates the method and the graphical features

An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials

A thermodynamically consistent damage model for the simulation of progressive delamination under variable mode ratio is presented. The model is formulated in the context of the Damage Mechanics. The constitutive equation that results from the definition of the free energy as a function of a damage variable is used to model the initiation and propagation of delamination. A new delamination initiation criterion is developed to assure that the formulation can account for changes in the loading mode in a thermodynamically consistent way. The formulation proposed accounts for crack closure effets avoiding interfacial penetration of two adjacent layers aftercomplete decohesion. The model is implemented in a finite element formulation. The numerical predictions given by the model are compared with experimental results

Tacrolimus vs. Azathioprine in myasthenia gravis treatment: a multicenter, prospective, randomized, double blind, head to head clinical trial

Current evidences show that tacrolimus could be a good therapeutic option in patients non-responsive to first-line treatments and even it could become one of the first-line drugs for treating MG. Our study will try to determine the effectivity and safety of tacrolimus in 190 myasthenia gravis patients with suboptimal response to azathioprine: after 12 months of treatment they will be randomized to continue with azathioprine or they will be switched to tacrolimus. Patients will follow the allocated treatment during 14 months and the response will be assessed as well as adverse effectsPURPOSE: To compare azathioprine vs. tacrolimus effectivity and safety in MG patients with suboptimal response to azathioprine at 12 monthsDESIGN: A 14 months multicenter, prospective, randomized, double blind, head to head clinical trial

Structural development of the harvester head saw unit

The main goal of the thesis was to further develop harvester head saw device to the Finnish forest machine manufacturer. The work was done from the basis of the manufacturer´s current production model and the earlier study from this same subject called: “Development of chain saw for harvester” Tero Kaatrasalo, 2004. The work was focused to improving the serviceability and reliability of the saw device, but design also included adding few beforehand determined new features into the saw unit. This was done to give some added value for the end customer. The work includes analysis of the earlier saw devices and ideations of the improvements for the structure.

Active du/dt Filtering for Variable-Speed AC Drives

An oscillating overvoltage has become a common phenomenon at the motor terminal in inverter-fed variable-speed drives. The problem has emerged since modern insulated gate bipolar transistors have become the standard choice as the power switch component in lowvoltage frequency converter drives. Theovervoltage phenomenon is a consequence of the pulse shape of inverter output voltage and impedance mismatches between the inverter, motor cable, and motor. The overvoltages are harmful to the electric motor, and may cause, for instance, insulation failure in the motor. Several methods have been developed to mitigate the problem. However, most of them are based on filtering with lossy passive components, the drawbacks of which are typically their cost and size. In this doctoral dissertation, application of a new active du/dt filtering method based on a low-loss LC circuit and active control to eliminate the motor overvoltages is discussed. The main benefits of the method are the controllability of the output voltage du/dt within certain limits, considerably smaller inductances in the filter circuit resulting in a smaller physical component size, and excellent filtering performance when compared with typical traditional du/dt filtering solutions. Moreover, no additional components are required, since the active control of the filter circuit takes place in the process of the upper-level PWM modulation using the same power switches as the inverter output stage. Further, the active du/dt method will benefit from the development of semiconductor power switch modules, as new technologies and materials emerge, because the method requires additional switching in the output stage of the inverter and generation of narrow voltage pulses. Since additional switching is required in the output stage, additional losses are generated in the inverter as a result of the application of the method. Considerations on the application of the active du/dt filtering method in electric drives are presented together with experimental data in order to verify the potential of the method.

A risk infection simulation model for fusarium head blight of wheat

Fusarium Head Blight (FHB) is a disease of great concern in wheat (Triticum aestivum). Due to its relatively narrow susceptible phase and environmental dependence, the pathosystem is suitable for modeling. In the present work, a mechanistic model for estimating an infection index of FHB was developed. The model is process-based driven by rates, rules and coefficients for estimating the dynamics of flowering, airborne inoculum density and infection frequency. The latter is a function of temperature during an infection event (IE), which is defined based on a combination of daily records of precipitation and mean relative humidity. The daily infection index is the product of the daily proportion of susceptible tissue available, infection frequency and spore cloud density. The model was evaluated with an independent dataset of epidemics recorded in experimental plots (five years and three planting dates) at Passo Fundo, Brazil. Four models that use different factors were tested, and results showed all were able to explain variation for disease incidence and severity. A model that uses a correction factor for extending host susceptibility and daily spore cloud density to account for post-flowering infections was the most accurate explaining 93% of the variation in disease severity and 69% of disease incidence according to regression analysis.