The core characteristics and nursing care activities in psychiatric intensive care units in Sweden

Internationally, research on psychiatric intensive care units (PICUs) commonly reportsresults from demographic studies such as criteria for admission, need for involuntary treatment, andthe occurrence of violent behaviour. A few international studies describe the caring aspect of thePICUs based specifically on caregivers’ experiences. The concept of PICU in Sweden is not clearlydefined. The aim of this study is to describe the core characteristics of a PICU in Sweden and todescribe the care activities provided for patients admitted to the PICUs. Critical incident techniquewas used as the research method. Eighteen caregivers at a PICU participated in the study bycompleting a semistructured questionnaire. In-depth interviews with three nurses and two assistantnurses also constitute the data. An analysis of the content identified four categories that characterizethe core of PICU: the dramatic admission, protests and refusal of treatment, escalating behaviours, andtemporarily coercive measure. Care activities for PICUs were also analysed and identified as controlling– establishing boundaries, protecting – warding off, supporting – giving intensive assistance, andstructuring the environment. Finally, the discussion put focus on determining the intensive aspect ofpsychiatric care which has not been done in a Swedish perspective before. PICUs were interpreted asa level of care as it is composed by limited structures and closeness in care.

Parent’s experiences of feeding their preterm infant in Neonatal Units in Sweden. : Ethnographic design

Introduction: Studies have shown that having a preterm infant may cause stress and powerlessness for parents. It is important to support parents around the feeding situation, and that the Neonatal Intensive Care Unit (NICU) has appropriate space and place to help the family to bond to each other. For the healthcare professionals it is important to promote skin-to-skin contact and breastfeeding; particularly for preterm infants. There are many studies on parent’s experiences of NICUs and a few studies on parent’s experiences of feeding their infant in the NICU. Objective: The objective of this study was to explore parents experiences of feeding their infant in the NICU. Design: The study was conducted using an ethnographic design. Results: A global theme of ‘The journey in feeding’ was developed from four organising themes: ‘Ways of infant feeding’; ‘Environmental influences’; ‘Relationships’ and ‘Emotional factors’. These themes illustrate the challenges mothers reported with different methods of feeding. The environment had a big impact on parent’s experiences of infant feeding. Some mothers felt that breastfeeding seemed unnatural because their infant was so tiny but breastfeeding and skin-to-skin contact helped them to bond to their infant. The mothers thought it was difficult to keep up with the milk production by only pumping. Routines were not inviting parents to find their own rhythm. They also felt stressed about the weighing. Healthcare professionals had positive and negative influences on the parents. Conclusions: This study demonstrates that while all parents expressed the wish to breastfeed, their ‘journey in feeding’ was highly influenced by method of feeding, environmental, relational and emotional factors. The general focus upon routines and assessing milk intake generated anxiety and reduced relationality. Midwives and neonatal nurses need to ensure that they emphasise and support the relational aspects of parenting and avoid over-emphasising milk intake and associated progress of the infant

As relações de trabalho nas organizações de economia solidária : um paralelo Brasil-França

O objetivo desta pesquisa é o estudo das relações que se estabelecem entre o trabalhador e seu trabalho em organizações não convencionais, isto é, que não se identificam com o modo capitalista de produção e que reivindicam, pelo contrário, a criatividade e a originalidade de um trabalho mais autônomo, mais justo e mais responsável: a economia solidária. O que significa, para o trabalhador, atuar nestas organizações? É a pergunta que orienta este estudo. Dito de outro modo: a experiência vivida no trabalho cotidiano pelo trabalhador da economia solidária manifesta-se mediante práticas profissionais e práticas sociais reveladoras de novas formas de inserção no trabalho e na sociedade? Seria essa experiência fruto de uma transformação que ocorre em alguns segmentos do mundo do trabalho e observável em outros contextos econômicos ou um reflexo da situação particularmente fragilizada dos trabalhadores brasileiros? Tratar-se-á então de entender a singularidade da participação dos trabalhadores a este projeto, seu impacto sobre o desenvolvimento de seu trabalho e das relações estabelecidas com a organização e de estudar as transformações que podem ocorrer nas relações sociais a partir do trabalho. Este será analisado sob uma dimensão subjetiva, como experiência de construção identitária, e sob uma dimensão institucional, como socialização para e pela solidariedade. O conceito de “trabalho solidário”, que reúne essas dimensões, será analisado apoiando-se, em grande parte, na obra de François Dubet e sua teoria do ator, da estrutura social e da socialização. A pesquisa se inscreve numa perspectiva de contribuição à Sociologia do Trabalho e das relações de trabalho sem a pretensão de realizar uma sociologia da economia solidária, nas suas múltiplas relações com a sociedade. O que está em foco é a transformação das relações entre o trabalhador e seu trabalho. O argumento defendido pela pesquisa é que as relações que nascem de uma experiência cotidiana do trabalho nas organizações da economia solidária são peculiares e diversificadas, mas interpelam e desafiam o conjunto das relações sociais. Portanto, o trabalho realizado nessas organizações talvez seria, apesar de suas ambigüidades, suscetível de estimular novas formas de relações sociais por meio de uma socialização assentada na solidariedade. Três tipos de organizações “referências” (tipos ideais) são construídos a partir do tipo de produção dominante e dos valores e objetivos que motivam a ação: organizações de produção, associações culturais e organizações humanitárias. A comparação Brasil – França, através das organizações investigadas em Porto Alegre e Paris, procura homologias, isto é: correspondências na construção da ação apesar de contextos diferentes, assim como a reconstrução de processos e procura de especificidades que possam enriquecer as interações. No decorrer da investigação, o que se encontrou, tanto no Brasil quanto na França, foi de um lado, um discurso “oficial” (mentores, militantes da economia solidária e pesquisadores) que descreve a tarefa que se atribui a economia solidária: a responsabilização de todos para transformar a sociedade. Por outro lado, encontrou-se, através do discurso dos trabalhadores, o relato da realidade quotidiana que aparece como um mundo de tensões e contradições. Para entender essa aparente incompatibilidade, foi preciso recriar os mecanismos de construção do trabalho solidário: em que medida pode-se falar de experiência social e em que medida a socialização para e pela solidariedade é bem sucedida. Para tanto, foi necessário recompor o processo de construção das relações sociais dentro e fora do trabalho, manifestado mediante estratégias dos atores que precisam se posicionar frente às lógicas de ação desenvolvidas pelas organizações. A seguir, analisou-se a possibilidade de encontrar semelhanças e diferenças entre o Brasil e a França na construção deste trabalho solidário. Enfim, procurou-se responder à pergunta que originou esta pesquisa: seria mesmo o trabalho solidário gerador de novas relações sociais no trabalho e no âmbito mais amplo da sociedade?

"We sold a million units": the role of advertising past-sales

In a market where past-sales embed information about consumers’ tastes (quality), we analyze the seller’s incentives to invest in a costly advertising campaign to report them under two informational assumptions. In the …rst scenario, a pooling equilibrium with past-sales advertising is derived. Information revelation only occurs when the seller bene…ciates from the herding behaviour that the advertising campaign induces on the part of consumers. In the second informational regime, a separating equilibrium with past-sales advertising is computed. Information revelation always happens, either through prices or through costly advertisements.

Geographical externalities and the Pacifying Police Units Program in Rio de Janeiro

The paper quantifies the effects on violence and police activity of the Pacifying Police Unit program (UPP) in Rio de Janeiro and the possible geographical spillovers caused by this policy. This program consists of taking selected shantytowns controlled by criminals organizations back to the State. The strategy of the policy is to dislodge the criminals and then settle a permanent community-oriented police station in the slum. The installation of police units in these slums can generate geographical spillover effects to other regions of the State of Rio de Janeiro. We use the interrupted time series approach proposed by Gonzalez-Navarro (2013) to address effects of a police when there is contagion of the control group and we find that criminal outcomes decrease in areas of UPP and in areas near treated regions. Furthermore, we build a model which allows to perform counterfactuals of this policy and to estimate causal effects in other areas of the State of Rio de Janeiro outside the city.

Isolation of Pseudomonas aeruginosa strains from dental office environments and units in Barretos, state of São Paulo, Brazil, and analysis of their susceptibility to antimicrobial drugs

Uma ampla variedade de patógenos oportunistas tem sido detectadas nos tubos de alimentação de água dos equipos odontológicos, particularmente no biofilme formado na superfície do tubo. Entre os patógenos oportunistas encontrados nos tubos de água, Pseudomonas aeruginosa é reconhecida como uma das principais causadoras de infecções nosocomiais. Foram coletadas 160 amostras de água e 200 amostras de fomites em quarenta clinicas odontológicas na cidade de Barretos, São Paulo, Brasil, durante o período de Janeiro a Julho de 2005. Setenta e seis cepas de P. aeruginosa, isoladas a partir dos fomites (5 cepas) e das amostras de água (71 cepas), foram analisadas quanto à susceptibilidade à seis drogas antimicrobianas freqüentemente utilizadas para o tratamento de infecções provocadas por P. aeruginosa. As principais suscetibilidades observadas foram para a ciprofloxacina, seguida pelo meropenem. A necessidade de um mecanismo efetivo para reduzir a contaminação bacteriana dentro dos tubos de alimentação de água dos equipos odontológicos foi enfatizada, e o risco da exposição ocupacional e infecção cruzada na prática odontológica, em especial quando causada por patógenos oportunistas como a P. aeruginosa foi realçado.

Toward the Optimization of an e-Tongue System Using Information Visualization: A Case Study with Perylene Tetracarboxylic Derivative Films in the Sensing Units

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic diversity and antifungal susceptibility testing of Trichosporon asahii isolated of Intensive Care Units patients

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Knowledge and attitudes of health care workers from intensive care units regarding nosocomial transmission of influenza: a study on the immediate pre-pandemic period

The transmission of influenza in health care settings is a major threat to patients, especially those with severe diseases. The attitude of health care workers (HCWs) may influence the transmission of countless infections. The current study aimed to quantify knowledge and identify attitudes of HCWs involved in intensive care units (ICUs) regarding the risk of nosocomial influenza transmission. A questionnaire was applied through interviews to HCWs who worked in one of the five ICUs from a teaching hospital. Questions about influenza were deliberately dispersed among others that assessed several infectious agents. Forty-two HCWs were interviewed: nine physicians, ten nurses and 23 nursing technicians or auxiliaries. Among the 42 HCWs, 98% were aware of the potential transmission of influenza virus in the ICUs, but only 31% would indicate droplet precautions for patients with suspected infection. Moreover, only 31% of them had been vaccinated against influenza in the last campaign (2008). Nursing technicians or auxiliaries were more likely to have been vaccinated, both by univariate and multivariable analysis. When asked about absenteeism, only 10% of the study subjects stated that they would not go to work if they had an influenza-like illness. Those findings suggest that, in non-pandemic periods, influenza control in hospitals requires strategies that combine continuous education with changes in organizational culture.

Effects of intrapulpal temperature change induced by visible light units on the metabolism of odontoblast-like cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Curing depth of composite resin light cured by LED and halogen light-curing units

The purpose of this study was to evaluate the polymerization effectiveness of a composite resin (Z-250) utilizing microhardness testing. In total, 80 samples with thicknesses of 2 and 4 mm were made, which were photoactivated by a conventional halogen light-curing unit, and light-curing units based on LED. The samples were stored in water distilled for 24 h at 37C. The Vickers microhardness was performed by the MMT-3 microhardness tester. The microhardness means obtained were as follows: G1, 72.88; G2, 69.35; G3, 67.66; G4, 69.71; G5, 70.95; G6, 75.19; G7, 72.96; and G8, 71.62. The data were submitted to an analysis of variance (ANOVA's test), adopting a significance level of 5%. The results showed that, in general, there were no statistical differences between the halogen and LED light-curing units used with the same parameters.

Effect of light-curing units on microleakage under dental composite resins

The aim of this study was to determine the effect of two light-curing units (QTH and LED) on microleakage of Class II composite resin restorations with dentin cavosurface margins. Twenty extracted mandibular first premolars, free of caries and fractures were prepared two vertical slot cavities in the occluso-mesial and -destal surfaces (2 mm buccal-lingually, 2 mm proximal-axially and cervical limit in enamel) and divided into 4 equal groups (n = 8): GI and GII: packable posterior composite light-activated with LED and QTH, respectively; GIII and GIV: micro-hybrid composite resin light-activated with LED and QTH, respectively. The composite resins were applied following the manufacturer's instructions. After 24 h of water storage specimens were subjected to thermocycling for a total of 500 cycles at 5 and 55A degrees C and the teeth were then sealed with impermeable material. Teeth were immersed in 0.5% Basic fuchsin during 24 h at room temperature, and zero to three levels of penetration score were attributed. The Mann-Whitney and Kruskal-Wallis tests showed significant statistically similar (P > 0.05) from GI to GII and GIII to GIV, which the GII (2.750) had the highest mean scores and the GIII and GIV (0.875) had lowest mean scores. The use of different light-curing units has no influence on marginal integrity of Class II composite resin restorations and the proprieties of composite resins are important to reduce the microleakage.

Dynamics of 5S rDNA in the tilapia (Oreochromis niloticus) genome: repeat units, inverted sequences, pseudogenes and chromosome loci

In higher eukaryotes, the 5S ribosomal DNA (5S rDNA) is organized in tandem arrays with repeat units composed of a coding region and a non-transcribed spacer sequence (NTS). These tandem arrays can be found on either one or more chromosome pairs. 5S rDNA copies from the tilapia fish. Oreochromis niloticus, were cloned and the nucleotide sequences of the coding region and of the non-transcribed spacer were deter-mined. Moreover, the genomic organization of the 5S rDNA tandem repeats was investigated by fluorescence in situ hybridization (FISH) and Southern blot hybridization. Two 5S rDNA classes, one consisting of 1.4-kb repeats and another one with 0.5-kb repeats were identified and designated 5S rDNA type I and type II, respectively, An inverted 5S rRNA gene and a 5S rRNA putative pseudogene were also identified inside the tandem repeats of 5S rDNA type I. FISH permitted the visualization of the 5S rRNA genes at three chromosome loci, one of them consisting of arrays of the 5S rDNA type I, and the two others corresponding to arrays of the 5S rDNA type II. The two classes of the 5S rDNA. The presence of pseudogenes, and the inverted genes observed in the O. niloticus genome might be a consequence of the intense dynamics of the evolution of these tandem repeat elements. Copyright (C) 2002 S. Karger AG, Basel.

Delimiting genetic units in Neotropical toads under incomplete lineage sorting and hybridization

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hardening of a dual-cure resin cement using QTH and LED curing units

Objective: This study evaluated the surface hardness of a resin cement (RelyX ARC) photoactivated through indirect composite resin (Cristobal) disks of different thicknesses using either a light- emitting diode (LED) or quartz tungsten halogen (QTH) light source. Material and Methods: Eighteen resin cement specimens were prepared and divided into 6 groups according to the type of curing unit and the thickness of resin disks interposed between the cement surface and light source. Three indentations (50 g for 15 s) were performed on the top and bottom surface of each specimen and a mean Vickers hardness number (VHN) was calculated for each specimen. The data were analyzed using two-way ANOVA and Tukey-Kramer test was used for post-hoc pairwise comparisons. Results: Increased indirect resin disk thickness resulted in decreased mean VHN values. Mean VHN values for the top surfaces of the resin cement specimens ranged from 23.2 to 46.1 (QTH) and 32.3 to 41.7 (LED). The LED curing light source produced higher hardness values compared to the QTH light source for 2- and 3-mm-thick indirect resin disks. The differences were clinically, but not statistically significant. Increased indirect resin disk thickness also resulted in decreased mean VHN values for the bottom surfaces of the resin cement: 5.8 to 19.1 (QTH) and 7.5 to 32.0 (LED). For the bottom surfaces, a statistically significant interaction was also found between the type of curing light source and the indirect resin disk thickness. Conclusions: Mean surface hardness values of resin cement specimens decreased with the increase of indirect resin disk thickness. The LED curing light source generally produced higher surface hardness values.