Pegfilgrastim to accelerate neutrophil engraftment following peripheral blood stem cell transplant and reduce the duration of neutropenia, hospitalization, and use of intravenous antibiotics: a phase II study in multiple myeloma and lymphoma and comparison with filgrastim-treated matched controls.

This trial was aimed to explore the efficacy of pegfilgrastim to accelerate neutrophil engraftment after stem cell autotransplant. Twenty patients with multiple myeloma and 20 with lymphoma received pegfilgrastim 6 mg on day +1. Forty cases treated with daily filgrastim starting at median day +7 (5-7), matched by age, sex, diagnosis, high-dose chemotherapy schedule, CD34 +  cell-dose, and prior therapy lines, were used for comparison. Median time to neutrophil engraftment was 9.5 vs. 11 days for pegfilgrastim and filgrastim, respectively (p < 0.0001). Likewise, duration of neutropenia, intravenous antibiotic use, and hospitalization favored pegfilgrastim, while platelet engraftment, transfusion requirement, and fever duration were equivalent in both groups. No grade  ≥ 3 toxicities were observed. Patients with lymphoma performed similarly to the entire cohort, while patients with myeloma showed faster neutrophil engraftment and shorter neutropenia but not shorter hospitalization and antibiotic use. The possibility of different outcomes for lymphoma and myeloma suggests that stratification by diagnosis may be useful in future phase III studies.

Theory of Wetting-Induced Fluid Entrainment by Advancing Contact Lines on Dry Surfaces

We report on the onset of fluid entrainment when a contact line is forced to advance over a dry solid of arbitrary wettability. We show that entrainment occurs at a critical advancing speed beyond which the balance between capillary, viscous, and contact-line forces sustaining the shape of the interface is no longer satisfied. Wetting couples to the hydrodynamics by setting both the morphology of the interface at small scales and the viscous friction of the front. We find that the critical deformation that the interface can sustain is controlled by the friction at the contact line and the viscosity contrast between the displacing and displaced fluids, leading to a rich variety of wetting-entrainment regimes. We discuss the potential use of our theory to measure contact-line forces using atomic force microscopy and to study entrainment under microfluidic conditions exploiting colloid-polymer fluids of ultralow surface tension.

Debating the centre : the theory of principal qualificand (mukhyavisesya) in classical Indian philosophy

The theory of language has occupied a special place in the history of Indian thought. Indian philosophers give particular attention to the analysis of the cognition obtained from language, known under the generic name of śābdabodha. This term is used to denote, among other things, the cognition episode of the hearer, the content of which is described in the form of a paraphrase of a sentence represented as a hierarchical structure. Philosophers submit the meaning of the component items of a sentence and their relationship to a thorough examination, and represent the content of the resulting cognition as a paraphrase centred on a meaning element, that is taken as principal qualificand (mukhyaviśesya) which is qualified by the other meaning elements. This analysis is the object of continuous debate over a period of more than a thousand years between the philosophers of the schools of Mimāmsā, Nyāya (mainly in its Navya form) and Vyākarana. While these philosophers are in complete agreement on the idea that the cognition of sentence meaning has a hierarchical structure and share the concept of a single principal qualificand (qualified by other meaning elements), they strongly disagree on the question which meaning element has this role and by which morphological item it is expressed. This disagreement is the central point of their debate and gives rise to competing versions of this theory. The Mïmāmsakas argue that the principal qualificand is what they call bhāvanā ̒bringing into being̒, ̒efficient force̒ or ̒productive operation̒, expressed by the verbal affix, and distinct from the specific procedures signified by the verbal root; the Naiyāyikas generally take it to be the meaning of the word with the first case ending, while the Vaiyākaranas take it to be the operation expressed by the verbal root. All the participants rely on the Pāninian grammar, insofar as the Mimāmsakas and Naiyāyikas do not compose a new grammar of Sanskrit, but use different interpretive strategies in order to justify their views, that are often in overt contradiction with the interpretation of the Pāninian rules accepted by the Vaiyākaranas. In each of the three positions, weakness in one area is compensated by strength in another, and the cumulative force of the total argumentation shows that no position can be declared as correct or overall superior to the others. This book is an attempt to understand this debate, and to show that, to make full sense of the irreconcilable positions of the three schools, one must go beyond linguistic factors and consider the very beginnings of each school's concern with the issue under scrutiny. The texts, and particularly the late texts of each school present very complex versions of the theory, yet the key to understanding why these positions remain irreconcilable seems to lie elsewhere, this in spite of extensive argumentation involving a great deal of linguistic and logical technicalities. Historically, this theory arises in Mimāmsā (with Sabara and Kumārila), then in Nyāya (with Udayana), in a doctrinal and theological context, as a byproduct of the debate over Vedic authority. The Navya-Vaiyākaranas enter this debate last (with Bhattoji Dïksita and Kaunda Bhatta), with the declared aim of refuting the arguments of the Mïmāmsakas and Naiyāyikas by bringing to light the shortcomings in their understanding of Pāninian grammar. The central argument has focused on the capacity of the initial contexts, with the network of issues to which the principal qualificand theory is connected, to render intelligible the presuppositions and aims behind the complex linguistic justification of the classical and late stages of this debate. Reading the debate in this light not only reveals the rationality and internal coherence of each position beyond the linguistic arguments, but makes it possible to understand why the thinkers of the three schools have continued to hold on to three mutually exclusive positions. They are defending not only their version of the principal qualificand theory, but (though not openly acknowledged) the entire network of arguments, linguistic and/or extra-linguistic, to which this theory is connected, as well as the presuppositions and aims underlying these arguments.

Offer and use of complementary and alternative medicine in hospitals of the French-speaking part of Switzerland.

Background: In 2004, complementary and alternative medicine (CAM) was offered by physicians in one third of Swiss hospitals. Since then, CAM health policy has considerably changed. This study aims at describing the present supply and use of CAM in hospitals of the French-speaking part of Switzerland, and qualitatively explores the characteristics of this supply. Methods: Between June 2011 and March 2012, a short questionnaire was sent to the medical directors of hospitals (N=46), asking them whether a CAM was offered, where and by whom. Then, a semi-directive interview was conducted with 10 CAM therapists. Results: Among 37 responses (return rate 80%), 19 medical directors indicated that their hospital offered at least one CAM and 18 reported that they did not. Acupuncture was the most frequently proposed CAM, followed by manual therapies, osteopathy and aromatherapy. The disciplines that offered CAM most frequently were rehabilitation, gynaecology- obstetrics, palliative care, psychiatry and anaesthesiology. In eight out of ten interviews, it appeared that the procedures for introducing a CAM in the hospital were not tightly supervised by the hospital but were mainly based on the goodwill of the therapists, rather than clinical/scientific evidence. Conclusion: Hospitals offering CAM in the French-speaking part of Switzerland seems to have risen since 2004. The selection of CAM to be offered in a hospital should be based on the same procedure of evaluation and validation as conventional care, and if their safety and efficiency is evidence-based, they should receive the same structural resources.

Promoting the Creation, Share and Use of OERs through Open Repositories and Social Networks

In this paper we discuss and analyze the process of using a learning object repository and building a social network on the top of it, including aspects related to open source technologies, promoting the use of the repository by means of social networks and helping learners to develop their own learning paths.

Aspects on Process Engineering in the Finnish Pulp and Paper Industry : Thesis for the Degree of Licentiate in Science of Technology

Process development will be largely driven by the main equipment suppliers. The reason for this development is their ambition to supply complete plants or process systems instead of single pieces of equipment. The pulp and paper companies' interest lies in product development, as their main goal is to create winning brands and effective brand management. Design engineering companies will find their niche in detail engineering based on approved process solutions. Their development work will focus on increasing the efficiency of engineering work. Process design is a content-producing profession, which requires certain special characteristics: creativity, carefulness, the ability to work as a member of a design team according to time schedules and fluency in oral as well as written presentation. In the future, process engineers will increasingly need knowledge of chemistry as well as information and automation technology. Process engineering tools are developing rapidly. At the moment, these tools are good enough for static sizing and balancing, but dynamic simulation tools are not yet good enough for the complicated chemical reactions of pulp and paper chemistry. Dynamic simulation and virtual mill models are used as tools for training the operators. Computational fluid dynamics will certainlygain ground in process design.

Coping with Technology: A Study on Economic Methodology and Strategic Management of Technology

There is a broad consensus among economists that technologicalchange has been a major contributor to the productivity growth and, hence, to the growth of the material welfare in western industrialized countries at least over the last century. Paradoxically, this issue has not been the focal point of theoretical economics. At the same time, we have witnessed the rise of the importance of technological issues at the strategic management level of business firms. Interestingly, the research has not accurately responded to this challenge either. The tension between the overwhelming empirical evidence of the importance of technology and its relative omission in the research offers a challenging target for a methodological endeavor. This study deals with the question of how different theories cope with technology and explain technological change. The focusis at the firm level and the analysis concentrates on metatheoretical issues, except for the last two chapters, which examine the problems of strategic management of technology. Here the aim is to build a new evolutionary-based theoreticalframework to analyze innovation processes at the firm level. The study consistsof ten chapters. Chapter 1 poses the research problem and contrasts the two basic approaches, neoclassical and evolutionary, to be analyzed. Chapter 2 introduces the methodological framework which is based on the methodology of isolation. Methodological and ontoogical commitments of the rival approaches are revealed and basic questions concerning their ways of theorizing are elaborated. Chapters 3-6 deal with the so-called substantive isolative criteria. The aim is to examine how different approaches cope with such critical issues as inherent uncertainty and complexity of innovative activities (cognitive isolations, chapter 3), theboundedness of rationality of innovating agents (behavioral isolations, chapter4), the multidimensional nature of technology (chapter 5), and governance costsrelated to technology (chapter 6). Chapters 7 and 8 put all these things together and look at the explanatory structures used by the neoclassical and evolutionary approaches in the light of substantive isolations. The last two cpahters of the study utilize the methodological framework and tools to appraise different economics-based candidates in the context of strategic management of technology. The aim is to analyze how different approaches answer the fundamental question: How can firms gain competitive advantages through innovations and how can the rents appropriated from successful innovations be sustained? The last chapter introduces a new evolutionary-based technology management framework. Also the largely omitted issues of entrepreneurship are examined.

Design,implementation and use of an Internet kiosk as an an information system for CNC machinists

Tätä diplomityötä sponsoroi suuri Isobritannialainen lentokoneteollisuudessa toimiva yritys, joka huomasi että globaalin tuotantostrategian ollessa painopisteenä ja tietoteknisten järjestelmien kuten CAD/CAM ollessa merkittävänä osana tuotantoa, on löydettävä ymmärrys siitä, mitkä ovat tuotannon tietojärjestelmien tarpeet ja onko niiden kehittämisestä hyötyä yritykselle.Diplomityössä selitetään Internet teknologiaan perustuvan kioskin kehittämisestä tietotukijärjestelmäksi tuotanto-osastolle, jossa valmistetaan moottorin osia CNC-koneilla. Kioskeissa on piirteitä, jotka voisivat osoittautua hyödyllisiksi myös tuotantoympäristöissä ja siksi tässä työssä tutkitaan kioskiin perustuvaa lähestymistapaa tuotantoympäristöön sovellettuna.Diplomityö kuvaa informaatiokioskin kehittämistä alkaen alkuvaatimusten keruusta tietojärjestelmää varten, tietojärjestelmän suunnittelu- ja kehitysvaiheen sekä lopuksi analysoi kioskin onnistuneisuutta tuotantoympäristössä käytettävyystutkimuksen avulla, joka suoritettiin sen jälkeen kun kioski oli implementoitu tehtaassa.Johtopäätökset osoittavat, että kioski on hyvin implementoitavissa tuotantoympäristöön ja todistaa, että tuotantoinformaation jakelu sähköisessä muodossa on huomattavasti tehokkaampaa kuin paperilla. Käyttäjien kommentit osoittavat että kioski on sopiva heidän tietotarpeisiinsa ja siitä on hyötyä heidän työlleen. Kioski tarjoaa hyötyjä tuotantotason lisäksi myös johtotasolle.

Local perception and use of the multifunctionality of water tanks in two villages of Tamil Nadu, South India

Using data from free listings and a survey in two villages of Tamil Nadu, India, we discuss local perceptions and uses of water tanks, a traditional irrigation infrastructure. We hypothesize that both farmers and nonfarmers perceive and use water tanks for purposes other than irrigation. We found that informants recognized the importance of water tanks for irrigation, but also acknowledged other socioeconomic uses and ecological functions. Marginal sectors (i.e., Scheduled Castes) use tank resources in more diverse ways than other sectors of the population. Findings are relevant for development. International organizations working on the revival of water tanks aim to transfer water management to farmers for the purpose of irrigation. By recognizing that tanks benefit people other than farmers and in ways other than providing irrigation water, organizations working on tank rejuvenation could achieve a more equitable management of tank resources.

Bone Mineral Accrual in Physically Active Girls. With Special Reference to Reduction in Physical Activity Level and Use of Oral Contraceptives

Adolescence is an important time for acquiring high peak bone mass. Physical activity is known to be beneficial to bone development. The effect of estrogen-progestin contraceptives (EPC) is still controversial. Altogether 142 (52 gymnasts, 46 runners, and 42 controls) adolescent women participated in this study, which is based on two 7-year (n =142), one 6-year (n =140) and one 4-year (n =122) follow-ups. Information on physical activity, menstrual history, sexual maturation, nutrition, living habits and health status was obtained through questionnaires and interviews. The bone mineral density (BMD) and content (BMC) of lumbar spine (LS) and femoral neck (FN) were measured by dual- energy X-ray absoptiometry. Calcaneal sonographic measurements were also made. The physical activity of the athletes participating in this study decreased after 3-year follow-up. High-impact exercise was beneficial to bones. LS and FN BMC was higher in gymnasts than in controls during the follow-up. Reduction in physical activity had negative effects on bone mass. LS and FN BMC increased less in the group having reduced their physical activity more than 50%, compared with those continuing at the previous level (1.69 g, p=0.021; 0.14 g, p=0.015, respectively). The amount of physical activity was the only significant parameter accounting for the calcaneal sonography measurements at 6-year follow-up (11.3%) and reduced activity level was associated with lower sonographic values. Long-term low-dose EPC use seemed to prevent normal bone mass acquisition. There was a significant trend towards a smaller increase in LS and FN BMC among long-term EPC users. In conclusion, this study confirms that high-impact exercise is beneficial to bones and that the benefits are partly maintained even after a clear reduction in training level at least for 4 years. Continued exercise is needed to retain all acquired benefits. The bone mass gained and maintained can possibly be maximized in adolescence by implementing high-impact exercise for youngsters. The peak bone mass of the young women participating in the study may be reached before the age of 20. Use of low-dose EPCs seems to suppress normal bone mass acquisition.

Epigenetic regulatory elements: Recent advances in understanding their mode of action and use for recombinant protein production in mammalian cells.

Successful generation of high producing cell lines requires the generation of cell clones expressing the recombinant protein at high levels and the characterization of the clones' ability to maintain stable expression levels. The use of cis-acting epigenetic regulatory elements that improve this otherwise long and uncertain process has revolutionized recombinant protein production. Here we review and discuss new insights into the molecular mode of action of the matrix attachment regions (MARs) and ubiquitously-acting chromatin opening elements (UCOEs), i.e. cis-acting elements, and how these elements are being used to improve recombinant protein production. These elements can help maintain the chromatin environment of the transgene genomic integration locus in a transcriptionally favorable state, which increases the numbers of positive clones and the transgene expression levels. Moreover, the high producing clones tend to be more stable in long-term cultures even in the absence of selection pressure. Therefore, by increasing the probability of isolating a high producing clone, as well as by increasing transcription efficiency and stability, these elements can significantly reduce the time and cost required for producing large quantities of recombinant proteins.