Anomalia anatômica da veia porta: uma causa rara de impossibilidade de doação do lobo direito em transplante hepático intervivos

Living related liver transplantation is being increasingly used for patients that can not wait for a cadaveric organ. We describe a case of a right lobe donor who had a type III portal vein anomaly. On this anomaly the portal vein gives branches first to the right posterior vein and then to the right anterior vein and the left portal vein. The recipient had portal vein thrombosis that was recognized only during the surgery. The Doppler examination performed before the operation did not detect this thrombosis. The transplant was not accomplished. Anatomical anomaly of the portal vein may be a rare cause impossibility to organ donation in living related liver transplantation.

Lymph node metastasis in early gastric cancer

OBJECTIVE: to evaluate the incidence of lymph node metastasis in early gastric cancer, identifying risk factors for its development. METHODS: we conducted a prospective study of patients with gastric cancer admitted to the Section of the Esophago-Gastric Surgery of the Surgery of Service HUCFF-UFRJ, from January 2006 to May 2012. RESULTS: the rate of early gastric cancer was 16.3%. The incidence of nodal metastases was 30.8% and occurred more frequently in patients with tumors with involvement of the submucosa (42.9%), in those poorly differentiated (36.4%), in tumors larger than 2 cm (33.3%) and in type III ulcerated lesions (43.8%). CONCLUSION: the incidence of lymph node metastases in patients was very high and suggests that one should keep the radicality of resection in early gastric cancer, particularly in relation to D2 lymphadenectomy, recommended for advanced gastric cancer. Conservative resections, with lymphadenectomies smaller than D2, should be performed only in selected cases, well-studied as for the risk factors of lymph node metastasis. Despite the small number of cases did not permit to relate the rate of lymph node metastasis to the risk factors considered, we noted a strong tendency for the occurrence of these metastases in the poorly differentiated, type III, larger than 2 cm tumors, and in the Lauren diffuse types.

Female pelvic floor disorders – outcome after mesh-augmented procedures and studies on vaginal connective tissue

Pelvic floor disorders, such as urinary incontinence (UI) and pelvic organ prolapse (POP), are common disorders in women. Because of the prolonged life expectancy the prevalence of UI and POP and the probability of ending up in surgery are increasing. However, the pathophysiology behind these disorders is still unsolved. The aim of this thesis is to study possible alterations in the connective tissue in the vaginal wall in patients with and without POP. The long-term outcome and complications of mid-urethral slings (MUS) and mesh-augmented POP surgery were studied in heterogenic patient populations. More elastin and a slight increase in immunostaining of type III and V collagens in tissue samples were obtained from patients with POP compared to controls in whom type I collagen was more prominent. The studies assessing the mesh-augmented procedures revealed good efficacy and high patient satisfaction after a long-term follow-up. Patients operated on because of mixed incontinence and with BMI >30 kg/m² reported significantly more urinary symptoms and a lower quality of life than the patients operated on because of stress urinary incontinence and the ones with BMI ≤30 kg/m². The objective outcome was equal between the groups. Mesh exposure through vaginal mucosa occurred in 23 % of the patients after POP surgery, most of these being asymptomatic. There are alterations in connective tissues in patients with POP. Mid-urethral sling procedures produced good long-term cure rates and patient satisfaction. As to the prolapse surgery, in spite of relatively high exposure rate, mesh-augmented procedure proved to be safe and effective method for the correction of POP.

Effect of gallium-arsenide laser, gallium-aluminum-arsenide laser and healing ointment on cutaneous wound healing in Wistar rats

This study determined the effects of gallium-aluminum-arsenide laser (GaAlAs), gallium-arsenide laser (GaAs) and Dersani® healing ointment on skin wounds in Wistar rats. The parameters analyzed were: type I and III collagen fiber concentrations as well as the rate of wound closure. Five wounds, 12 mm in diameter, were made on the animals’ backs. The depth of the surgical incision was controlled by removing the epithelial tissue until the dorsal muscular fascia was exposed. The animals were anesthetized with ketamine and xylazine via intraperitoneal injection. The rats were randomly divided into five groups of 6 animals each, according to the treatment received. Group 1 (L4): GaAs laser (4 J/cm²); group 2 (L30): GaAlAs laser (30 J/cm²); group 3 (L60): GaAlAs laser (60 J/cm²); group 4 (D): Dersani® ointment; group 5 (control): 0.9% saline. The applications were made daily over a period of 20 days. Tissue fragments were stained with picrosirius to distinguish type I collagen from type III collagen. The collagen fibers were photo-documented and analyzed using the Quantum software based on the primary color spectrum (red, yellow and blue). Significant results for wound closing rate were obtained for group 1 (L4), 7.37 mm/day. The highest concentration of type III collagen fibers was observed in group 2 (L30; 37.80 ± 7.10%), which differed from control (29.86 ± 5.15%) on the 20th day of treatment. The type I collagen fibers of group 1 (L4; 2.67 ± 2.23%) and group 2 (L30; 2.87 ± 2.40%) differed significantly from control (1.77 ± 2.97%) on the 20th day of the experiment.

Normal skin and hypertrophic scar fibroblasts differentially regulate collagen and fibronectin expression as well as mitochondrial membrane potential in response to basic fibroblast growth factor

Basic fibroblast growth factor (bFGF) regulates skin wound healing; however, the underlying mechanism remains to be defined. In the present study, we determined the effects of bFGF on the regulation of cell growth as well as collagen and fibronectin expression in fibroblasts from normal human skin and from hypertrophic scars. We then explored the involvement of mitochondria in mediating bFGF-inducedeffects on the fibroblasts. We isolated and cultivated normal and hypertrophic scar fibroblasts from tissue biopsies of patients who underwent plastic surgery for repairing hypertrophic scars. The fibroblasts were then treated with different concentrations of bFGF (ranging from 0.1 to 1000 ng/mL). The growth of hypertrophic scar fibroblasts became slower with selective inhibition of type I collagen production after exposure to bFGF. However, type III collagen expression was affected in both normal and hypertrophic scar fibroblasts. Moreover, fibronectin expression in the normal fibroblasts was up-regulated after bFGF treatment. bFGF (1000 ng/mL) also induced mitochondrial depolarization in hypertrophic scar fibroblasts (P < 0.01). The cellular ATP level decreased in hypertrophic scar fibroblasts (P < 0.05), while it increased in the normal fibroblasts following treatment with bFGF (P < 0.01). These data suggest that bFGF has differential effects and mechanisms on fibroblasts of the normal skin and hypertrophic scars, indicating that bFGF may play a role in the early phase of skin wound healing and post-burn scar formation.

Effect of drying method on the adsorption isotherms and isosteric heat of passion fruit pulp powder

The sorption behavior of dry products is generally affected by the drying method. The sorption isotherms are useful to determine and compare thermodynamic properties of passion fruit pulp powder processed by different drying methods. The objective of this study is to analyze the effects of different drying methods on the sorption properties of passion fruit pulp powder. Passion fruit pulp powder was dehydrated using different dryers: vacuum, spray dryer, vibro-fluidized, and freeze dryer. The moisture equilibrium data of Passion Fruit Pulp (PFP) powders with 55% of maltodextrin (MD) were determined at 20, 30, 40 and 50 ºC. The behavior of the curves was type III, according to Brunauer's classification, and the GAB model was fitted to the experimental equilibrium data. The equilibrium moisture contents of the samples were little affected by temperature variation. The spray dryer provides a dry product with higher adsorption capacity than that of the other methods. The vibro-fluidized bed drying showed higher adsorption capacity than that of vacuum and freeze drying. The vacuum and freeze drying presented the same adsorption capacity. The isosteric heats of sorption were found to decrease with increasing moisture content. Considering the effect of drying methods, the highest isosteric heat of sorption was observed for powders produced by spray drying, whereas powders obtained by vacuum and freeze drying showed the lowest isosteric heats of sorption.

Study of adsorption isotherms of green coconut pulp

Brazil is considered one of the largest producers and consumers of tropical fruits. Green coconut (Cocos nucifera L.) stands out not only for its production and consumption, but also for the high amount of waste produced by coconut water industry and in natura consumption. Therefore, there is a need for utilization of this by-product. This study aims to study the adsorption isotherms of green coconut pulp and determine its isosteric heat of sorption. The adsorption isotherms at temperatures of 30, 40, 50, 60, and 70 °C were analyzed, and they exhibit type III behavior, typical of sugar rich foods. The experimental results of equilibrium moisture content were correlated by models present in the literature. The Guggenheim, Anderson and De Boer (GAB) model proved particularly good overall agreement with the experimental data. The heat of sorption determined from the adsorption isotherms increased with the decrease in moisture content. The heat of sorption is considered as indicative of intermolecular attractive forces between the sorption sites and water vapor, which is an important factor to predict the shelf life of dried products.

The role of a minor party : a comparative study of the British Liberal Party and the Australian Country Party since 1918

and the Australian Country Party since 1918. 2. The thesis examines the proposition that the role of a minor party is determined, not by its total strength expressed as a percentage of the national vote, but by how its strength is concentrated. Australia and Britain were chosen for the comparison because of the many similarities in political culture and in the extent of class voting. Each country has a party - the Country Party in Australia and the Liberal Party in Britain - which has had a distinct impact on the political scene in their respective countries. In the period from 1918 to the present day neither party, at the national level, has ever held the largest number of seats in parliament let alone a majority of seats, and it is in this sense that they are herein defined as minor parties. In the thesis the constitutional background of and differences between Australia and Britain are reviewed, followed by a brief historical picture of each of the two parties being studied. The sources of supporc of the two parties are analysed and it is here that real differences emerge. The Country Party in Australia is a deliberately sectional party with a narrow rural base, whereas the British Liberal Party is more broadly based than either the Labour or Conservative Parties in Britain. 3. Party leadership and organisation are then discussed. Both parties have had outstanding leaders, Earle Page and McEwen for the Country Party; Asquith, Lloyd George and Grimond for the Liberal Party. Both parties have had relatively fewer leaders than their major party opponents. However, whereas the Country Party has been free of serious splits the Liberal Party was shattered on the leadership struggles of Asquith and Lloyd George. Both parties have been identified with decentralisation of state power, the Country Party through its support, albeit sometimes lukewarm of the New States Movement; the Liberal Party through its espousal of a federal system for Britain with separate Welsh, Scottish and regional assemblies. Unfortunately for the British Liberal Party the beneficiaries of their policies in this area have been relatively new nationalist parties in both Wales arid Scotland. The major part of the thesis is devoted to a study of how the electoral systems in the two countries have, in practice, worked to the advantage or disadvantage of the Country Party and the British Liberal Party. The Country Party has been as consistently over-represented in the House of Representatives as the Liberal Party has been under-represented in the British House of Commons. With the even distribution of its support the introduction of the single transferable vote, in itself, would bring little benefit to the British Liberal Party in terms of seats. Multimember urban constituencies combined with some type of list system are the only way the Liberals are likely to obtain House of Commons seats in proportion to their votes. 4. Finally, the relations of the two minor parties with their respective major parties are considered. In the conclusion the future of the two parties is reviewed. In general terms it appears that the Country Party is faced with a slow decline. Although the British Liberal Party made a major breakthrough, in terms of votes, in the February 1974 election, they were unable to maintain this momentum in the October election, even though they lost very little ground. In the long term they must make an inroad into Labour held seats if they are to progress further.

Integrating vitrinite reflectance, rock-eval pyrolysis, flourescence microscopy and palynology of the Athabasca oil sands, Kearl Lake area, northeastern Alberta

Three cores from the Kearl Lake Oil Sands area within the Athabasca deposit of northeastern Alberta have been analyzed to understand the thermal history of the McMurray and Clearwater formations of the Lower Cretaceous Mannville Group. The approach involves the integration of vitrinite reflectance (VR), Rock-Eval pyrolysis, fluorescence microscopy, and palynology. Mean VR varies between 0.21 and 0.43% Ro and indicates thermally immature levels equivalent to the rank of lignite to sub-bituminous coal. Although differing lithologies have influenced VR to some extent (i.e., coals and bitumen-rich zones), groundwater influence and oxidation seem not to have measurably altered YR. Rock-Eval analysis points to Type III/IV kerogen, and samples rich in amorphous organic matter (ADM) show little to no fluorescence characteristics, implying a terrestrial source of origin. Palynology reveals the presence of some delicate macerals but lack of fluorescence and abundant ADM suggests some degradation and partial oxidation of the samples.

Étude clinique et génétique d’une nouvelle forme d’ataxie spinocérébelleuse pure associée à l’Érythrokératodermie

Nous présentons ici la description clinique et génétique d’un syndrome neurocutané unique. Le laboratoire du Dr Cossette a entrepris la caractérisation clinique et génétique d'une famille canadienne-française qui a été identifiée par les Drs Giroux et Barbeau en 1972 et qui comprend plus de 100 personnes sur six générations. Les membres atteints de cette famille présentent des lésions typiques d'érythrokératodermie (EK) (OMIM 133190, EKV1 et EKV2), associées à une ataxie spinocérébelleuse pure. Dans cette famille, l'ataxie est caractérisée par des troubles de la coordination et de la démarche causés par une dégénérescence du cervelet et de la moelle épinière. Cette ataxie est transmise selon un mode autosomique dominant. Une étude antérieure de cette variante d'EK avec ataxie avait suggéré une liaison sur le chromosome 1p34-p35, soit la même région que les formes EKV de type 1 et 2, causées respectivement par des mutations dans les gènes connexin-31 (GJB3; OMIM 603324) et connexin-30.3 (GJB4; OMIM 605425). Cependant, aucune mutation n'a été retrouvée dans ces gènes pour la famille canadienne-française. Nous avons récemment recontacté la famille et effectué des examens détaillés, incluant une imagerie par résonance magnétique (IRM) et un électromyogramme (EMG). Les manifestations neurologiques des individus atteints sont compatibles avec une nouvelle forme d’ataxie cérébelleuse pure à transmission autosomique dominante (ADCA de type III dans la classification de Harding) que nous avons appelée SCA34. Une cartographie complète du génome nous a permis de localiser le gène SCA34 sur le chromosome 6p12.3-q16.2. Également, en collaboration avec les Drs Alexis Brice (Hôpital Pitié-La Salpêtrière, Paris) et Alfredo Brusco (Hôpital San Giovanni Battista di Torino, Italie), nous avons confirmé que trois autres familles européennes avec SCA inexpliquée étaient également liées au locus SCA34. Notre laboratoire a récemment entrepris la recherche des mutations responsables de SCA34. Les résultats de ce criblage de gènes candidats sont présentés dans le chapitre 3 de cette thèse.

Impacts potentiels d’un changement climatique sur le pergélisol dans le nord canadien

Les fichiers video (d'animation) sont dans un format Windows Media (.wmv)

Étude de la biogenèse de l'autotransporteur AIDA-I d'Escherichia coli

Les autotransporteurs monomériques, appartenant au système de sécrétion de type V, correspondent à une famille importante de facteurs de virulence bactériens. Plusieurs fonctions, souvent essentielles pour le développement d’une infection ou pour le maintien et la survie des bactéries dans l’organisme hôte, ont été décrites pour cette famille de protéines. Malgré l’importance de ces protéines, notre connaissance de leur biogenèse et de leur mécanisme d’action demeure relativement limitée. L’autotransporteur AIDA-I, retrouvé chez diverses souches d’Escherichia coli, est un autotransporter multifonctionnel typique impliqué dans l’adhésion et l’invasion cellulaire ainsi que dans la formation de biofilm et d’agrégats bactériens. Les domaines extracellulaires d’autotransporteurs monomériques sont responsables de la fonctionnalité et possèdent pratiquement tous une structure caractéristique d’hélice β. Nous avons mené une étude de mutagenèse aléatoire avec AIDA-I afin de comprendre la base de la multifonctionnalité de cette protéine. Par cette approche, nous avons démontré que les domaines passagers de certains autotransporteurs possèdent une organisation modulaire, ce qui signifie qu’ils sont construits sous la forme de modules fonctionnels. Les domaines passagers d’autotransporteurs peuvent être clivés et relâchés dans le milieu extracellulaire. Toutefois, malgré la diversité des mécanismes de clivage existants, plusieurs protéines, telles qu’AIDA-I, sont clivées par un mécanisme qui demeure inconnu. En effectuant une renaturation in vitro d’AIDA-I, couplée avec une approche de mutagenèse dirigée, nous avons démontré que cette protéine se clive par un mécanisme autocatalytique qui implique deux acides aminés possédant un groupement carboxyle. Ces résultats ont permis la description d’un nouveau mécanisme de clivage pour la famille des autotransporteurs monomériques. Une des particularités d’AIDA-I est sa glycosylation par une heptosyltransférase spécifique nommée Aah. La glycosylation est un concept plutôt récent chez les bactéries et pour l’instant, très peu de protéines ont été décrites comme glycosylées chez E. coli. Nous avons démontré que Aah est le prototype pour une nouvelle famille de glycosyltransférases bactériennes retrouvées chez diverses espèces de protéobactéries. La glycosylation d’AIDA-I est une modification cytoplasmique et post-traductionnelle. De plus, Aah ne reconnaît pas une séquence primaire, mais plutôt un motif structural. Ces observations sont uniques chez les bactéries et permettent d’élargir nos connaissances sur la glycosylation chez les procaryotes. La glycosylation par Aah est essentielle pour la conformation d’AIDA-I et par conséquent pour sa capacité de permettre l’adhésion. Puisque plusieurs homologues d’Aah sont retrouvés à proximité d’autotransporteurs monomériques putatifs, cette famille de glycosyltranférases pourrait être importante, sinon essentielle, pour la biogenèse et/ou la fonction de nombreux autotransporteurs. En conclusion, les résultats présentés dans cette thèse apportent de nouvelles informations et permettent une meilleure compréhension de la biogenèse d’une des plus importantes familles de protéines sécrétées chez les bactéries Gram négatif.

Les autotransporteurs auto-associatifs d’Escherichia coli : de facteurs de virulence à déterminants sociaux

Les autotransporteurs monomériques représentent le système de sécrétion le plus simple et le plus utilisé chez les bactéries à Gram négatif. Les autotransporteurs monomériques sont des protéines modulaires qui contiennent toute l’information pour leur sécrétion dans leur séquence. Les phénotypes associés à l’expression d’un autotransporteur peuvent être très variés et, souvent, les autotransporteurs sont des protéines multifonctionnelles. C’est le cas notamment des autotransporteurs AIDA-I, TibA et Ag43 d’Escherichia coli qui promouvoient l’adhésion et l’invasion de cellules épithéliales, l’auto-agrégation des bactéries et la formation de biofilm. Ces trois autotransporteurs ont d’ailleurs été regroupés dans une même famille, appelée les autotransporteurs auto-associatifs (SAATs). À cause de leur fonctionnalité, les SAATs sont considérés comme étant d’importants facteurs de virulence d’Escherichia coli. Toutefois, il existe plusieurs différences entre les SAATs qui ne sont pas bien comprises, si bien que leur rôle pour les bactéries n’est toujours pas bien compris. Nous avons donc d’abord caractérisé TibA, le membre des SAATs le moins bien étudié à l’aide d’une étude structure-fonction. Nous avons observé que TibA était une protéine modulaire et que son domaine fonctionnel était composé de deux modules : un module d’auto-agrégation en N-terminal et un module d’adhésion en C-terminal. En comparant nos résultats avec ceux obtenus pour les autres SAATs, nous avons réalisé que l’organisation des trois SAATs était très variée, c’est-à-dire que les trois SAATs sont composés de modules différents. Nous avons par ailleurs observé cet arrangement en modules lorsque nous avons analysé plusieurs séquences d’aidA, suggérant qu’un mécanisme d’échange et d’acquisition de modules était à la base de l’évolution des SAATs. Sans surprise, nous avons aussi observé que la famille des SAATs ne se limitait pas à AIDA-I, TibA et Ag43 et ne se limitait pas à Escherichia coli. La comparaison a aussi révélé l’importance du phénotype d’auto-agrégation dans la fonctionnalité des SAATs. Nous avons donc entrepris une étude du mécanisme d’auto-agrégation. Nos résultats on montré que l’auto-agrégation était le résultat d’une interaction directe SAAT/SAAT et ont mis en évidence un mécanisme similaire à celui utilisé par les cadhérines eucaryotes. De plus, nous avons observé que, comme les cadhérines, les SAATs étaient impliqués dans des interactions homophiliques; un SAAT interagit donc spécifiquement avec lui-même et non avec un différent SAAT. Finalement, les SAATs font parties des quelques protéines qui sont glycosylées chez Escherichia coli. Nous avons déterminé que le rôle de la glycosylation de TibA était de stabiliser la protéine et de lui donner la flexibilité nécessaire pour moduler sa conformation et, ainsi, être pleinement fonctionnelle. Globalement, nos résultats suggèrent que les SAATs sont des molécules « cadhérines-like » qui permettent la reconnaissance de soi chez les bactéries. Une telle habilité à discriminer entre le soi et le non-soi pourrait donc être utilisée par les bactéries pour organiser les communautés bactériennes.

Elektrochemische und spektroelektrochemische Untersuchungen symmetrischer und unsymmetrischer Spiroverbindungen

In dieser Arbeit wurden elektronische Eigenschaften der sogenannten Spiroverbin-dungen untersucht, die aus zwei durch ein gemeinsames Spiro-Kohlenstoffatom miteinander verbundenen π-Systemen bestehen. Solche Untersuchungen sind notwendig, um die gezielte Synthese organischer Materialien mit bestimmten optischen, elektrischen, photoelektrischen oder magnetischen Eigenschaften zu ermöglichen. Im einzelnen wurden mit Hilfe der Cyclovoltammetrie, Square-Wave-Voltammetrie und Spektroelektrochemie eine Reihe homologer Spiro-p-oligophenyle, sowie symmetrisch und unsymmetrisch substituierte Spiroverbindungen und Spirocyclopentadithiophene unter-sucht. Dabei ergaben sich folgende Einflussfaktoren: Kettenlänge, verschiedene Substituenten (Trimethylsilyl, tert-Butyl, Fluor, Pyridyl, perfluoriertes Pyridyl, Dimethylamino-Gruppe), verschiedene Positionen der Substitution, Lage der Spiroverknüpfung und Art des π-Systems im Spirokern. Die elektronischen Eigenschaften der untersuchten Verbindungen variieren systema-tisch mit der Kettenlänge. So vermindert sich der Betrag der Redoxpotentiale der Spiroverbin-dungen mit Zunahme der Kettenlänge, während die Anzahl der übertragenen Elektronen mit zunehmender Kettenlänge wächst. Die Absorption der neutralen und geladenen Spezies ver-schiebt sich mit steigender Kettenlänge bathochrom. Der Substituenteneinfluss auf die Poten-tiallage hängt davon ab, welcher der Effekte +I, -I, +M, -M überwiegt; dabei spielt auch die Position der Substitution eine Rolle. Weiter lässt sich der Einfluss der Lage der Spiroverknüpfung auf die Redoxpotentiale mit der verschiedenen Coulomb-Abstoßung innerhalb oder/und zwischen Phenylketten bei symmetrisch und unsymmetrisch verknüpften Spiroverbindungen begründen. Schließlich wurden die Redoxmechanismen der untersuchten Spiroverbindungen er-mittelt. Die meisten Verbindungen werden zum Bis(radikalion) reduziert bzw. oxidiert (Me-chanismus A). Nur wenige Verbindungen werden nach Mechanismus B reduziert, in dem das Elektron unter Bildung eines Dianions in die schon einfach reduzierte Molekülhälfte über-geht. Die Unterschiede der Redoxpotentiale, der Lage der Absorption, des Reduktionsme-chanismus der Verbindungen mit unterschiedlichen Spirokernen (Spirobifluoren und Spiro-cyclopentadithiophen) konnten mit den unterschiedlichen elektronischen Strukturen von Phe-nyl- und Thiophenring (aromatisches und heteroaromatisches π System) erklärt werden.

Alley cropping of willows and grassland for bioenergy provision: productivity, tree-crop interactions and energy balance

The demand for biomass for bioenergy has increased rapidly in industrialized countries in the recent years. Biogenic energy carriers are known to reduce CO2 emissions. However, the resource-inefficient production of biomass often caused negative impacts on the environment, e.g. biodiversity losses, nitrate leaching, and erosion. The detrimental effects evolved mainly from annual crops. Therefore, the aim of modern bioenergy cropping systems is to combine yield stability and environmental benefits by the establishment of mixed-cropping systems. A particular emphasis is on perennial crops which are perceived as environmentally superior to annual crops. Agroforestry systems represent such mixed perennial cropping systems and consist of a mix of trees and arable crops or grassland within the same area of land. Agroforestry practices vary across the globe and alley cropping is a type of agroforestry system which is well adapted to the temperate zone, with a high degree of mechanization. Trees are planted in rows and crops are planted in the alleyways, which facilitates their management by machinery. This study was conducted to examine a young alley cropping system of willows and two grassland mixtures for bioenergy provision under temperate climate conditions. The first part of the thesis identified possible competition effects between willows and the two grassland mixtures. Since light seemed to be the factor most affecting the yield performance of the understory in temperate agroforestry systems, a biennial in situ artificial shade experiment was established over a separate clover-grass stand to quantify the effects of shade. Data to possible below- and aboveground interactions among willows and the two grassland mixtures and their effects on productivity, sward composition, and quality were monitored along a tree-grassland interface within the alleys. In the second part, productivity of the alley cropping system was examined on a triennial time frame and compared to separate grassland and willow stands as controls. Three different conversion technologies (combustion of hay, integrated generation of solid fuel and biogas from biomass, whole crop digestion) were applied to grassland biomass as feedstock and analyzed for its energetic potential. The energetic potential of willow wood chips was calculated by applying combustion as conversion technique. Net energy balances of separate grassland stands, agroforestry and pure willow stands evaluated their energy efficiency. Results of the biennial artificial shade experiment showed that severe shade (80 % light reduction) halved grassland productivity on average compared to a non-shaded control. White clover as heliophilous plant responded sensitively to limited radiation and its dry matter contribution in the sward decreased with increasing shade, whereas non-leguminous forbs (mainly segetal species) benefited. Changes in nutritive quality could not be confirmed by this experiment. Through the study on interactions within the alleys of the young agroforestry system it was possible to outline changes of incident light, soil temperature and sward composition of clover-grass along the tree-grassland interface. Nearly no effects of trees on precipitation, soil moisture and understory productivity occurred along the interface during the biennial experiment. Considering the results of the productivity and the net energy yield alley cropping system had lower than pure grassland stands, irrespective of the grassland seed mixture or fertilization, but was higher than that for pure willow stands. The comparison of three different energetic conversion techniques for the grassland biomass showed highest net energy yields for hay combustion, whereas the integrated generation of solid fuel and biogas from biomass (IFBB) and whole crop digestion performed similarly. However, due to the low fuel quality of hay, its direct combustion cannot be recommended as a viable conversion technique, whereas IFBB fuels were of a similar quality to wood chip from willow.