Fenologia de espécies anemocóricas em um cerrado sensu stricto no interior de São Paulo

O objetivo deste estudo foi entender os padrões de frutificação de espécies anemocóricas em uma área de Cerrado sensu stricto, de acordo com a morfologia dos diásporos e a deciduidade das espécies, e verificar se esse padrão difere entre borda e interior do cerrado estudado. Um total de 377 indivíduos foram amostrados, distribuídos em 26 espécies, pertencentes a 10 famílias. Foi notada significativa sazonalidade para toda a comunidade, e uma sincronia entre os indivíduos principalmente no ambiente de borda. Os picos de atividade de queda foliar e frutificação ocorreram simultaneamente para as espécies decíduas e perenes, enquanto que para as espécies semidecíduas a época de maior índice de queda antecedeu um pouco o de maturação dos frutos. Entretanto esses eventos ocorreram durante a época de menores índices pluviométricos, maiores índices de queda foliar e anterior ao desenvolvimento de folhas novas, de forma que os diásporos secam e são dispersos pelo vento mais facilmente

Usinagem da liga de níquel inconel 718 com pastilhas de cerâmica

The machining of super alloys resistant to high temperatures such as nickel alloys, inconel 718 specifically, is a very difficult job to obtain improvements in the process, due to the difficulty of machining at high cutting speeds, the use of these alloys in industries showed great developments in recent years, its application in aeronautical industry spread being used in vane turbo, compressor parts, props and set elements. The automotive, chemical, medical and others also took advantage of the great features of inconel 718 and has used the material. The high temperature resistant alloys have high machining difficulty, a fact that is associated with high cutting forces generated during machining which result in high temperatures. High levels of temperatures can cause deterioration of the cutting edge, with subsequent deformation or breakage, wear most common obtained in machining such materials are flank wear the formation of built-up edge for cutting and notch wear. The experimental part of the work consists in machining of nickel-based alloy Inconel 718 heat treated for hardness, using a tool based ceramic silicon nitride Sandvik (Si3N4) in order to compare the best results obtained in the master's thesis of SANTOS (2010) who used a tool ceramics also the basis of silicon nitride which was developed in the doctoral thesis of SOUZA (2005). Assays were performed on a CNC lathe and was noted for each cutting edge results obtained. Tests were made starting from an initial condition of the tool with cutting speed of 200 m/min, feed 0.5 mm and 0.5 mm depth of cut was reduced cutting speed for the subsequent tests with the same conditions of feed and depth of cut. The tool presented wear instant under two 200 m/min and 100 m/min, premature rupture of 50 m/min and finally cut provided with difficulty... (Complete abstract click electronic access below)

Aspectos técnicos e ambientais da incorporação de novas tecnologias no setor sucroalcooleiro: produção de hidrogênio e gaseificação do bagaço

The purpose of this work is to study the incorporation of hydrogen production (Case A) and the process of gasification of sugarcane bagasse associated with combined cycle gas turbine and steam turbine (Case B) for Distillery Pioneers process. These technologies can be used to improve the energy supply in the sugarcane mill. Initially the processes for obtaining sugar and ethanol from sugarcane is discussed, with a theoretical introduction to hydrogen, the process of steam reforming and gasification of biomass (bagasse) by inserting a turbine associated with the recovery boiler gas. Subsequently makes up the energy and exergy analysis of the incorporation of the above technologies. In end stage makes it an ecological analysis considering or not the carbon cycle (photosynthesis), to determine the levels of emissions of pollutants, carbon dioxide equivalent, indicators of pollution and ecological efficiencies associated with technological developments proposed. It is concluded that hydrogen production by steam reforming of ethanol and gasification of bagasse are viable alternatives from the point of view of technical and environmental applications in the biofuels industry, contributing to the development of the sector in the country

Integridade dos dados meteorológicos obtidos por duas estações meteorológicas automatizadas

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Proposta de metodologia para aplicação de eficiência energética em uma usina hidrelétrica

Pós-graduação em Engenharia Mecânica - FEG

Análise comparativa de técnicas de recuperação ambiental em áreas degradadas no município de Bofete/SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo sobre uma turbina a gás instalada em uma refinaria de petróleo

The gas turbine (GT) is known to have: low cost of capital over the amount of energy, high flexibility, high reliability, short delivery time, commissioning and commercial operation at the beginning and quick departure. The gas turbine is also recognized for its superior environmental performance, manifested in air pollution containment and reducing greenhouse gases (Mahi, 1994). Gas turbines in simple cycle mode (SC) have long been used by utilities to limited power generation peak. In addition, manufacturing facilities use gas turbines for power generation units on site, often in combination with the process of heat production, such as hot water and steam process. In recent years, the performance of industrial gas turbines has been improved due to significant investments in research and development, in terms of fuel to electricity conversion efficiency, plant capacity, availability and reliability. The greater availability of energy resources such as natural gas (NG), the significant reduction of capital costs and the introduction of advanced cycles, have also been a success factor for the increased use of gas turbines to load applications base (Poulikas, 2004). Open Cycle Gas Turbine with a greater degree of heat to the atmosphere may alternatively be used to produce additional electricity using a steam cycle, or to compose a cogeneration process. The combined cycle (CC) uses the heat from the gas turbine exhaust gas to increase the power output and increase the overall efficiency of more than 50% second (Najjar, 2001). The initial discovery of these cycles in the commercial power generation market was possible due to the development of the gas turbine. Only from the 1970s that gas turbine inlet temperature and therefore the exhaust gas temperature was sufficiently high to allow a better efficiency in the combined cycle ... (Complete Abstract click electronic access below)

Incorporação de novas tecnologias no setor sucroalcooleiro: produção de hidrogênio e aumento da oferta de eletricidade

This work studies the incorporation of new technologies in the sugarcane sector. Are considered the ethanol steam reforming and the gasification of sugarcane bagasse(by-product) processes associated with combined cycle systems (Gas Turbine + Steam Turbine), aggregating hydrogen production and increased electricity supply in the sector, respectively. To verify the technical feasibility of the incorporation processes was performed a thermodynamic analysis, considering data from a typical Brazilian Sugar Cane Industry. In another step the economic viability study of the hydrogen production process was made, with consideration on hydrated and anhydrous ethanol steam reform, comparing the cost of hydrogen production. Also considered studies of economic engineering of the gasification process and the generation of electricity associated. As conclusions, it follows that the ethanol steam reforming is a great alternative for hydrogen production, presenting production cost relatively low, especially when is considered the steam reforming of hydrated ethanol. For the gasification process associated with combined cycle, can be observed an increase of 8.56 times of the electricity production in the sugar cane industry, indicating a positive annual saving when the sales price of the supply electricity is greater than 0.070 US$/kWh. Finally it can be concluded that the incorporation of these new processes allow greater profitability and operational flexibility of Brazilian sugarcane mills

Estimação do número de internações por doenças respiratórias utilizando lógica fuzzy tipo-2 intervalar

In this work was developed a fuzzy computational model type-2 predictive interval, using the software of the type-2 fuzzy MATLAB toolbox, the final idea is to estimate the number of hospitalizations of patients with respiratory diseases. The interest in the creation of this model is to assist in decision makeshift hospital environment, where there are no medical or professional equipment available to provide the care that the population need. It began working with the study of fuzzy logic, the fuzzy inference system and fuzzy toolbox. Through a real database provided by the Departamento de Informática do Sistema Único de Saúde (DATASUS) and Companhia de Tecnologia de Saneamento Básico (CETESB), was possible to start the model. The analyzed database is composed of the number of patients admitted with respiratory diseases a day for the public hospital in São José dos Campos, during the year 2009 and by factors such as PM10, SO2, wind and humidity. These factors were analyzed as input variables and, through these, is possible to get the number of admissions a day, which is the output variable of the model. For data analysis we used the fuzzy control method type-2 Mamdani. In the following steps the performance developed in this work was compared with the performance of the same model using fuzzy logic type-1. Finally, the validity of the models was estimated by the ROC curve

Análise dos parâmetros técnicos e econômicos do aquecedor solar a vácuo, visando economia de energia

This work is about a development of a vacuum solar water heater. To accomplish this, some measurements were made, such as flow, water temperature and room temperature, relative humidity, solar power density and wind speed. It first presents a brief explanation about the global situation in relation to the accelerated use of exhaustible energy sources which can result in a breakdown of these for future generations. From this, is proposed to analyze this solar water heater with vacuum tubes during the winter season in Brazil southeastern region, under different environmental conditions. From such ideas became possible to prove through the experimental part, calculations and graphical results that technology and the performance of this device are technical and economically viable, according to the life cycle of this. It was also found that the average monthly production in a maximum heat stroke situation was 193,33kWh and minimum isolation was 57,76kWh. This reveals that this instrument should start to be examined more closely by all, as a way to reduce the use of electricity, which will protect the environment without reducing the comfort of people

Expansão térmica de nanotubos de carbono de duas camadas

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Análise de causas de trincas em carro de translação de empilhadeira/recuperadora

The present work aims to study the possible causes of cracks founded and recovered in translation cars of ore Forklift / ore Reclaimer. To identify the possible causes of cracks observed on the equipment it was used a static approach analysis, using a finite element method as an analysis tool, using a specific structural analysis program. After making the model, a strain gage measurement was necessary because there may be significant amounts of masses of non-structural components that were not modeled and were not available in the drawings, as well as fouling ore. With the calibrated model it was processed analyses with the load cases of dead load, product, wind and excavation. After the processing, it was observed that none of these load cases resulted in values that caused the crack, so another three hypotheses were tested: depression and misalignment, jacking and translation of only three cars. Of these three hypotheses it was observed that the jacking coud be the cause of the cracks, because the distribution of stress. Due to the miss of parameters, like the height utilized in this process, it was not possible to affirm the real stress level

Analise técnica, econômica e ecológica da incorporação de sistemas de gaseificação de bagaço de cana-de-açúcar no setor sucroalcooleiro: uso de ciclos combinados para o aumento da oferta de eletricidade

Pós-graduação em Engenharia Mecânica - FEG

Micro-extração em fase sólida (SPME) in situ e comparação de compostos voláteis em variedades de manga (Mangifera indica L.) resistentes e suscetíveis à mosca-das-frutas Anastrepha obliqua (Macquart) (Diptera: Tephritidae)

Pós-graduação em Química - IQ

Comportamento fenológico da liana Pyrostegia venusta (Ker Gawl.) Miers (Bignoniaceae) em área de cerradão na Estação Ecológica de Assis, SP.

Brazilian cerrado is characterized by an evident seasonality with distinct dry and wet seasons. Pyrostegia venusta is a common vine found in different physiognomies of the Cerrado. The species may present characteristics that allow its adjustment to the seasonal cycles. The phenology of vegetative and reproductive events was studied for this species in 2004 and 2005. The objective was to verify which climatic factors determine the phenological patterns observed in the species. Flowering was inversely related to mean temperatures and to the length of the day, while fruiting was inversely related to the photoperiod and directly related to the mean wind velocity. Seed dispersal was directly related to wind speed. As a consequence, flowering occurred at the end of the rainy season, close to the winter, and was prolonged until the end of the dry season. Fruiting and fruit maturation occurred during the dry period, with the seeds being dispersed at the end of this period. The seed dispersal at the end of the dry season, common to other anemochoric species of cerrado, allows a rapid germination at the beginning of the wet season, favoring the species propagation in this environment.