The "Abdominal Circulatory Pump": An Auxiliary Heart during Exercise?

Apart from its role as a flow generator for ventilation the diaphragm has a circulatory role. The cyclical abdominal pressure variations from its contractions cause swings in venous return from the splanchnic venous circulation. During exercise the action of the abdominal muscles may enhance this circulatory function of the diaphragm. Eleven healthy subjects (25 ± 7 year, 70 ± 11 kg, 1.78 ± 0.1 m, 3 F) performed plantar flexion exercise at ~4 METs. Changes in body volume (ΔVb) and trunk volume (ΔVtr) were measured simultaneously by double body plethysmography. Volume of blood shifts between trunk and extremities (Vbs) was determined non-invasively as ΔVtr-ΔVb. Three types of breathing were studied: spontaneous (SE), rib cage (RCE, voluntary emphasized inspiratory rib cage breathing), and abdominal (ABE, voluntary active abdominal expiration breathing). During SE and RCE blood was displaced from the extremities into the trunk (on average 0.16 ± 0.33 L and 0.48 ± 0.55 L, p < 0.05 SE vs. RCE), while during ABE it was displaced from the trunk to the extremities (0.22 ± 0.20 L p < 0.001, p < 0.05 RCE and SE vs. ABE respectively). At baseline, Vbs swings (maximum to minimum amplitude) were bimodal and averaged 0.13 ± 0.08 L. During exercise, Vbs swings consistently increased (0.42 ± 0.34 L, 0.40 ± 0.26 L, 0.46 ± 0.21 L, for SE, RCE and ABE respectively, all p < 0.01 vs. baseline). It follows that during leg exercise significant bi-directional blood shifting occurs between the trunk and the extremities. The dynamics and partitioning of these blood shifts strongly depend on the relative predominance of the action of the diaphragm, the rib cage and the abdominal muscles. Depending on the partitioning between respiratory muscles for the act of breathing, the distribution of blood between trunk and extremities can vary by up to 1 L. We conclude that during exercise the abdominal muscles and the diaphragm might play a role of an "auxiliary heart."

Pulmonary 64-MDCT angiography with 50 mL of iodinated contrast material in an unselected patient population: a feasible protocol

Abstract Objective: To propose a protocol for pulmonary angiography using 64-slice multidetector computed tomography (64-MDCT) with 50 mL of iodinated contrast material, in an unselected patient population, as well as to evaluate vascular enhancement and image quality. Materials and Methods: We evaluated 29 patients (22-86 years of age). The body mass index ranged from 19.0 kg/m2 to 41.8 kg/m2. Patients underwent pulmonary CT angiography in a 64-MDCT scanner, receiving 50 mL of iodinated contrast material via venous access at a rate of 4.5 mL/s. Bolus tracking was applied in the superior vena cava. Two experienced radiologists assessed image quality and vascular enhancement. Results: The mean density was 382 Hounsfield units (HU) for the pulmonary trunk; 379 and 377 HU for the right and left main pulmonary arteries, respectively; and 346 and 364 HU for the right and left inferior pulmonary arteries, respectively. In all patients, subsegmental arteries were analyzed. There were streak artifacts from contrast material in the superior vena cava in all patients. However, those artifacts did not impair the image analysis. Conclusion: Our findings suggest that pulmonary angiography using 64-MDCT with 50 mL of iodinated contrast can produce high quality images in unselected patient populations.

Controle de autenticidade de óleos de copaíba comerciais por cromatografia gasosa de alta resolução

Copaiba oil is a resin extracted from the trunk of trees of Copaifera species which grow in Brazil where it is widely used in popular medicine as an anti-inflammatory, antiseptic anti-bactericidal, diuretic, dermatological, expectorant, and anti-infective. The comparative study of the composition of commercial copaiba oils was carried out by high resolution gas chromatography (HRGC) and high resolution gas chromatography-mass spectrometry (HRGC-MS) analysis. The commercial oils were compared with authentic oils, collected from the southeast and northern regions of Brazil. Sixteen commercial oils were analysed and two of them revealed adulterations with fatty acids. Using the chromatographic profile of authentic copaiba species oils, it is possible to analyse commercial oils and determine the authenticity of these materials.

Metabólitos secundários de Protium heptaphyllum march

Phytochemical investigation of the resin, fruits, leaves, and trunk of Protium heptaphyllum led to the isolation of the monoterpene p-menth-3-ene-1,2,8-triol, alpha and beta amyrin, quercetin, brein, quercetin-3-O-rhamnosyl, (-) catechin and scopoletin. Their structures were established by 1D and 2D NMR spectroscopy and comparison with published data.

Constituintes químicos da casca do caule de Amburana cearensis A.C. Smith

The phytochemical analysis of the ethanol extract trunk bark of Amburana cearensis allowed the isolation and identification of twelve constituents: coumarin, sucrose, two phenol acids (vanillic acid and protocatechuic acid), five flavonoids (afrormosin, isokaempferide, kaempferol, quercetin and 4'-methoxy-fisetin), a phenol glucoside (amburoside A) and a mixture of glucosilated b-sitosterol and stigmasterol. Their structures were elucidated by spectroscopic methods such as IR, MS, ¹H and 13C NMR, including uni and bidimensional techniques, in addition to comparison with literature data.

Novos constituintes químicos das cascas do caule de Tabebuia heptaphylla

A new triterpene, 3beta,6beta,21beta-trihydroxyolean-12-ene and a new iridoid, 8alpha-methyl-8beta-hydroxy-6beta-(3',4'-dimethoxy)benzoyloxy-1 alpha,3alpha-dimethoxy-octahydro-cyclopenta[c]pyran were isolated from the trunk bark of a specimen of Tabebuia heptaphylla (Bignoniaceae) collected in the "Pantanal" of Mato Grosso do Sul, Brazil. Twelve known compounds were also obtained in this work, comprising four iridoids, 6-O-p-hydroxybenzoylajugol, 6-O-p-methoxybenzoylajugol, 6-O-3",4"-dimethoxybenzoylajugol, 8alpha-methyl-8beta-hydroxy-6beta-(4'-hydroxy)benzoyloxy-1alpha,3 alpha-dimethoxy-octahydro-cyclopenta[c]pyran, a cyclopentene dialdehyde, 2-formyl-5-(3',4'-dimethoxybenzoyloxy)-3-methyl-2-cyclopentene-1-acetaldehyde, a phenylethanoid glycoside, verbascoside and three benzoic acid derivatives, p-hydroxybenzoic, p-methoxybenzoic and 3,4-dimethoxybenzoic acids, in addition to squalene, sitostenone and sitosterol. The antioxidant properties of the isolated compounds were also evaluated in this work.

Fenilpropanóides e outros constituintes bioativos de Nectandra megapotamica

From the trunk bark of Nectandra megapotamica (Lauraceae) four phenylpropanoids, elemicin, isoelemicin, (±)-erythro-1-(3,4,5-trimethoxyphenyl)-1,2-propanediol and (±)-threo-1-(3,4,5-trimetoxyphenyl)-1,2-propanediol have been isolated, in addition to 3,4,5-trimethoxybenzoic acid, (-)-epicatechin and trans-1(10)-epoxy-4(15)-caryophyllene. The diastereoisomeric erythro- and threo- phenylpropanoids are being reported for the first time in a plant taxon as well as the occurrence of the other compounds in Nectandra. The structures of the isolated compounds have been established on the basis of 1D and 2D NMR spectroscopic techniques. Their in vitro antifungal activities against standard strains of Candida albicans, C. krusei, C. tropicalis and Cryptococcus neoformans and antioxidant properties were also evaluated in this work.

Estudo fitoquímico de espécimens cultivados de cumaru (Amburana cearensis A. C. Smith)

Due to the threat of extinction of Amburana cearensis, a tree of medicinal importance for the Northeastern Brazil, a phytochemical analysis was performed with specimens obtained by seed germination. Ten compounds were isolated and identified by spectroscopic methods and comparison with literature data. p-Hydroxybenzoic acid, ayapin, (E/Z)-melilotosides are being reported for the first time for the genus, besides coumarin, isokaempferide, vanillic acid, protocatechuic acid, amburosides A and B which have already been found in the trunk bark. Based on physical and NMR spectroscopy evidences the structures of several melilotosides already described in the literature have been suggested to be revised.

Eudesmane and rearranged eudesmane sesquiterpenes from Nectandra cissiflora

Four eudesmane-type sesquiterpenes, costic acid (1), 12-carboxyeudesman-3,11(13)-diene (2), viscic acid (3), 3-oxo-γ-costic acid (4) and two rearranged eudesmane derivatives, 3α-hydroxyisoiphion-11(13)-en-12-oic acid (5) and 5β-hydroxy-4-oxo-11(13)-dehydroiphionan-12-oic acid (6), in addition to (-)-epicatechin, have been isolated from the trunk bark of Nectandra cissiflora. This is the first reported occurrence in the Lauraceae of 3-6. The structures of the isolated compounds have been established on the basis of 1D and 2D NMR spectroscopic techniques. The 13C NMR assignments of 3, 5 and 6 are given here for the first time, as well as some corrections to the previously reported chemical shift assignments of 4.

Advanced orbital pipe welding

Since the introduction of automatic orbital welding in pipeline application in 1961, significant improvements have been obtained in orbital pipe welding systems. Requirement of more productive welding systems for pipeline application forces manufacturers to innovate new advanced systems and welding processes for orbital welding method. Various methods have been used to make welding process adaptive, such as visual sensing, passive visual sensing, real-time intelligent control, scan welding technique, multi laser vision sensor, thermal scanning, adaptive image processing, neural network model, machine vision, and optical sensing. Numerous studies are reviewed and discussed in this Master’s thesis and based on a wide range of experiments which already have been accomplished by different researches the vision sensor are reported to be the best choice for adaptive orbital pipe welding system. Also, in this study the most welding processes as well as the most pipe variations welded by orbital welding systems mainly for oil and gas pipeline applications are explained. The welding results show that Gas Metal Arc Welding (GMAW) and its variants like Surface Tension Transfer (STT) and modified short circuit are the most preferred processes in the welding of root pass and can be replaced to the Gas Tungsten Arc Welding (GTAW) in many applications. Furthermore, dual-tandem gas metal arc welding technique is currently considered the most efficient method in the welding of fill pass. Orbital GTAW process mostly is applied for applications ranging from single run welding of thin walled stainless tubes to multi run welding of thick walled pipes. Flux cored arc welding process is faster process with higher deposition rate and recently this process is getting more popular in pipe welding applications. Also, combination of gas metal arc welding and Nd:YAG laser has shown acceptable results in girth welding of land pipelines for oil and gas industry. This Master’s thesis can be implemented as a guideline in welding of pipes and tubes to achieve higher quality and efficiency. Also, this research can be used as a base material for future investigations to supplement present finding.

Experimental alternatives for evaluation of progenies and clones in eucalyptus breeding programs

The feasibility of using augmented block designs and spatial analysis methods for early stage selection in eucalyptus breeding programs was tested. A total of 113 half-sib progenies of Eucalyptus urophylla and eight clones were evaluated in an 11 x 11 triple lattice experiment at two locations: Posto da Mata (Bahia, Brazil) and São Mateus (Minas Gerais, Brazil). Four checks were randomly allocated within each block. Plots consisted of 15 m long rows containing 6 plants spaced 3 m apart. The girth at breast height (cm/plant) was evaluated at 19 and 26 months of age. Variance analyses were performed according to the following methods: lattice design, randomized complete block design, augmented block design, Papadakis method, moving means method, and check plots. Comparisons among different methods were based on the magnitude of experimental errors and precision of the estimates of genetic and phenotypic parameters. General results indicated that augmented block design is useful to evaluate progenies and clones in early selection in eucalyptus breeding programs using moderate and low selection intensities. However, this design is not suitable for estimating genetic and phenotypic parameters due to its low precision. Check plots, nearest neighbour, Papadakis (1937), and moving means methods were efficient in removing the heterogeneity within blocks. These efficiencies were compared to that in lattice analysis for estimation of genetic and phenotypic parameters.

Dry biomass distribution in a cerrado sensu stricto site in Brazil central

The Cerrado has been the main source of firewood and charcoal in Brazil, but despite being one of the hot spots for conservation of the world's biodiversity, neither plantations of native species nor sustainable management has been adopted in the region. The aim of this work was to investigate the biomass distribution and the potential for energy production of the cerrado species. The study was conducted in a cerrado sensu stricto site at the Água Limpa Farm (15º 56'14'' S and 47º 46'08'' W) in the Cerrado Biosphere Reserve. An area of 63.54ha was divided in 20 x 50m plots and, a random sample consisting of ten of these plots, representing 1.56% of the study-site, was assessed. All woody individuals from 5 cm diameter at 30 cm above ground level were identified and measured. Each individual was felled, the twigs thinner than 3cm were discarded while the larger branches and the trunks, both with bark, were weighted separately. After that, 2.5cm transverse sections of the trunk with bark were taken at 0, 25, 50, 75 and 100% of the length. A similar sample was also taken at the base of each branch. A total of 47 species in 35 genera and 24 families were found, with an average density of 673 individuals per ha. The diameter distribution showed a reversed-J shape with 67% of the individuals up to 13cm, while the maximum diameter was 32.30cm. Seven species represented 72% of the total biomass. In general, the species with higher production per tree were among those with higher production per ha. This content was distributed by diameter classes, reaching a maximum of 2.5ton/ha between 9 to 13cm and then, decreasing to 0.96 ton/ha between 29 to 33cm diameter. Carbon sequestering was 6.2ton/ha (until the actual stage of cerrado) based on an average 50% carbon content in the dry matter. The heat combustion of the wood varied from 18,903kj/kg to 20,888kj/kg with an average of 19,942kj/kg. The smaller diameter classes fix more carbon due to the large number of small plants per ha. But, for a species that reached larger dimensions and contained individuals in all diameter classes, Vochysia thyrsoidea, one can verify an increase in carbon fixation from 1.41 kg/ha in the first class (5 to 9cm) to 138,3kg/ha in the last (25 to 33cm). That indicates that it is possible to select species that reach larger size with a higher capacity of carbon accumulation per plant. The species that reached larger dimensions, with a production per tree above average and had high calorific power values were Dalbergia miscolobium, Pterodon pubescens and Sclerolobium paniculatum. These species have potential for use in fuelwood plantations and sustainable management.

Fungi associated to bark lesions of Eucalyptus globulus stems in plantations from Uruguay

Trees with stem bark lesions are frequently observed in Eucalyptus globulus Labill. plantations, particularly in the central west region of Uruguay. These lesions constitute a problem for trunk decortications at harvest and they also facilitate the access of fungi that could cause wood decay. Seven, three and oneyear-old plantations, located at three sites in close proximity were selected. Four types of trunk lesions were present in trees regardless the age of plantation and more than one type was found in each plantation. The aim of this study was to investigate the fungal composition associated with these lesions and compare them to healthy tissues and try to find out the origin of these symptoms. Another purpose was to elucidate the real role of the fungi considered pathogens by means of experimental inoculations. Segments from lesions and healthy tissues yielded 897 fungal isolates belonging to 32 taxa, 681 isolates from bark lesions and 216 from healthy tissues. Both healthy and symptomatic tissues showed similar fungal species composition, but with differences in frequencies of colonization. Cytospora eucalypticola Van der Westhuizen, Botryosphaeria spp., Pestalotiopsis guepinii (Desm.) Stey. and Penicillium spp. were the dominant species isolated. As symptoms were not reproduced after experimental inoculation with Botryosphaeria ribis Grossenb. & Duggar and B. eucalyptorum Crous, & M.J. Wingf, it could be suggested that these lesions were originated by unfavorable environmental conditions. The frost that occurred for several days out of season and flooding may have been involved in the development of bark lesion.

Reforestation feasibility in area formerly used for cattle rasing in the state of Rondônia, Northwest Brazilian Amazon

Little knowledge on initial behavior of native tree species in recovering landscapes in the Amazon is a current concern for expanding reforestation in the region. Thus, the aim of this study was to evaluate the establishment of native tree species that could be used for reforestation in area previously covered by a pasture of brachiaria grass (Brachiaria brizantha) destined for intensive cattle rasing in the State of Rondônia. For this, there were performed previous diagnostic of landscape changes and the election of tree species based on the ecological group information. Some of the critical macronutrients for plant growth were supplied in the holes to alleviate nutrient deficiencies. In addition, growth and survival parameters were taken to evaluate the initial behavior of species. Six native tree species planted with different combinations (10mx10m, 5mx5m and 3mx3m) had survival rate and growth (total height, girth stem and crown projection area) measured in different intervals: 6-month, 12-month and 24-month after planting. All the species presented survival rate over 90% at 24 months and comparable growth indices to other native species under similar situation and in the region. Overall, Schizolobium amazonicum (bandarra), the non-identified legume tree 1 (acácia grande) and Colubrina glandulosa (sóbrasil) averaged over 90% the highest girth stem growth all over the area. S. amazonicum and the non-identified legume tree 1 (acácia grande) presented the best results for height and canopy area growth parameters, respectively. The combination among native tree species from initial successional ecological groups and fertilizer was favorable to promote reforestation in the conditions of the study area in Rondônia.

VEGETATIVE RESCUE AND CUTTINGS PROPAGATION OF Araucaria angustifolia (Bertol.) Kuntze

Brazilian pine or araucaria (Araucaria angustifolia) is a coniferous tree with great economic, social and environmental importance in southern Brazil, being exploited for both wood production and for its edible pine nuts. However, no efficient cloning techniques are available and, therefore, the purpose of this study was to evaluate the effectiveness of vegetative rescue methods for cuttings propagation of the species. Shoots/cuttings were generated in two ways: 26 years old trees underwent coppicing and 20 years old trees had the primary branches on the upper third of crown pruned at 2, 20 and 50 cm from the main trunk. Orthotropic shoots were rooted after application of indole-3-butyric acid (IBA) at 0, 2, 4 and 6 g.L-1. Coppicing produced 47 cuttings per plant with 90% orthotropic shoots, while pruning resulted in 182 cuttings per plant with 44% orthotropic shoots. Rooting success indexes were low with no influence of IBA, although they are slightly superior to the ones available in the literature for the species, ranging from 12 to 30% for the coppice shoots and from 0 to 28% for the branches shoots. We conclude that both vegetative rescue techniques are viable and have potentially important applications. Coppicing is recommended for the propagation aiming the production of wood, while shoots derived from the side branches of the crown are more appropriate for seeds orchards formation.