Person-oriented and process-oriented teachers : an investigation of the links between ESOL teachers' personal belief systems and approaches to teaching

This thesis looks to two traditions in research into language teaching, teacher beliefs and classroom interaction, in order to investigate the question: Do teachers of ESOL have an identifiable and coherent system of beliefs about teaching and learning that may account for different approaches to teaching? A qualitative approach to research is taken, following a case study tradition, in order to carry out an in-depth study into the beliefs of six ESOL teachers. Five teachers participated in an initial pilot study and two subsequently became the main case studies for the research. The beliefs of a sixth teacher were then investigated to verify the findings. Semi-structured interviews and classroom observations were carried out with all the teachers. The teachers in the study were found to have personal belief systems that cohere around two orientations to teaching and learning - a person orientation and a process orientation. Moreover, the findings suggest that underlying the orientations is the perception that teachers have of their teacher identity, in terms of whether this is seen as a separate identity or as part of their personality. It is suggested that the two orientations may offer a powerful tool for teacher education as it is increasingly recognised that, in order to be effective, teacher educators must take into account the beliefs that teachers bring with them to training and development programmes. An initial investigations into the teachers’ classroom behaviour suggests that while their methodologies approach may be very similar there are fundamental differences in their interactions patterns and these differences may be a result of their own orientation. However, while teachers’ personal belief systems undoubtedly underlie their approach to teaching, further research is needed to establish the extent and the nature of the relationship between orientation and classroom interaction.

Synchronization processes in nonlinear systems and their relation to cortical oscillatory dynamics

This thesis was focused on theoretical models of synchronization to cortical dynamics as measured by magnetoencephalography (MEG). Dynamical systems theory was used in both identifying relevant variables for brain coordination and also in devising methods for their quantification. We presented a method for studying interactions of linear and chaotic neuronal sources using MEG beamforming techniques. We showed that such sources can be accurately reconstructed in terms of their location, temporal dynamics and possible interactions. Synchronization in low-dimensional nonlinear systems was studied to explore specific correlates of functional integration and segregation. In the case of interacting dissimilar systems, relevant coordination phenomena involved generalized and phase synchronization, which were often intermittent. Spatially-extended systems were then studied. For locally-coupled dissimilar systems, as in the case of cortical columns, clustering behaviour occurred. Synchronized clusters emerged at different frequencies and their boundaries were marked through oscillation death. The macroscopic mean field revealed sharp spectral peaks at the frequencies of the clusters and broader spectral drops at their boundaries. These results question existing models of Event Related Synchronization and Desynchronization. We re-examined the concept of the steady-state evoked response following an AM stimulus. We showed that very little variability in the AM following response could be accounted by system noise. We presented a methodology for detecting local and global nonlinear interactions from MEG data in order to account for residual variability. We found crosshemispheric nonlinear interactions of ongoing cortical rhythms concurrent with the stimulus and interactions of these rhythms with the following AM responses. Finally, we hypothesized that holistic spatial stimuli would be accompanied by the emergence of clusters in primary visual cortex resulting in frequency-specific MEG oscillations. Indeed, we found different frequency distributions in induced gamma oscillations for different spatial stimuli, which was suggestive of temporal coding of these spatial stimuli. Further, we addressed the bursting character of these oscillations, which was suggestive of intermittent nonlinear dynamics. However, we did not observe the characteristic-3/2 power-law scaling in the distribution of interburst intervals. Further, this distribution was only seldom significantly different to the one obtained in surrogate data, where nonlinear structure was destroyed. In conclusion, the work presented in this thesis suggests that advances in dynamical systems theory in conjunction with developments in magnetoencephalography may facilitate a mapping between levels of description int he brain. this may potentially represent a major advancement in neuroscience.

A systems and cybernetic perspective on complex problem solving

This thesis is concerned with Organisational Problem Solving. The work reflects the complexities of organisational problem situations and the eclectic approach that has been necessary to gain an understanding of the processes involved. The thesis is structured into three main parts. Part I describes the author's understanding of problems and suitable approaches. Chapter 2 identifies the Transcendental Realist (TR) view of science (Harre 1970, Bhaskar 1975) as the best general framework for identifying suitable approaches to complex organisational problems. Chapter 3 discusses the relationship between Checkland's methodology (1972) and TR. The need to generate iconic (explanatory) models of the problem situation is identified and the ability of viable system modelling to supplement the modelling stage of the methodology is explored in Chapter 4. Chapter 5 builds further on the methodology to produce an original iconic model of the methodological process. The model characterises the mechanisms of organisational problem situations as well as desirable procedural steps. The Weltanschauungen (W's) or "world views" of key actors is recognised as central to the mechanisms involved. Part II describes the experience which prompted the theoretical investigation. Chapter 6 describes the first year of the project. The success of this stage is attributed to the predominance of a single W. Chapter 7 describes the changes in the organisation which made the remaining phase of the project difficult. These difficulties are attributed to a failure to recognise the importance of differing W's. Part III revisits the theoretical and organisational issues. Chapter 8 identifies a range of techniques embodying W's which are compatible with .the framework of Part I and which might usefully supplement it. Chapter 9 characterises possible W's in the sponsoring organisation. Throughout the work, an attempt 1s made to reflect the process as well as the product of the author's leaving.

Knowledge-based systems and engineering software

The work described was carried out as part of a collaborative Alvey software engineering project (project number SE057). The project collaborators were the Inter-Disciplinary Higher Degrees Scheme of the University of Aston in Birmingham, BIS Applied Systems Ltd. (BIS) and the British Steel Corporation. The aim of the project was to investigate the potential application of knowledge-based systems (KBSs) to the design of commercial data processing (DP) systems. The work was primarily concerned with BIS's Structured Systems Design (SSD) methodology for DP systems development and how users of this methodology could be supported using KBS tools. The problems encountered by users of SSD are discussed and potential forms of computer-based support for inexpert designers are identified. The architecture for a support environment for SSD is proposed based on the integration of KBS and non-KBS tools for individual design tasks within SSD - The Intellipse system. The Intellipse system has two modes of operation - Advisor and Designer. The design, implementation and user-evaluation of Advisor are discussed. The results of a Designer feasibility study, the aim of which was to analyse major design tasks in SSD to assess their suitability for KBS support, are reported. The potential role of KBS tools in the domain of database design is discussed. The project involved extensive knowledge engineering sessions with expert DP systems designers. Some practical lessons in relation to KBS development are derived from this experience. The nature of the expertise possessed by expert designers is discussed. The need for operational KBSs to be built to the same standards as other commercial and industrial software is identified. A comparison between current KBS and conventional DP systems development is made. On the basis of this analysis, a structured development method for KBSs in proposed - the POLITE model. Some initial results of applying this method to KBS development are discussed. Several areas for further research and development are identified.

Drying processess in the United Kingdom:assessment of industrial energy utilisation and efficiency of drying systems and the modelling of drying characters using neural networks (BL)

Drying is an important unit operation in process industry. Results have suggested that the energy used for drying has increased from 12% in 1978 to 18% of the total energy used in 1990. A literature survey of previous studies regarding overall drying energy consumption has demonstrated that there is little continuity of methods and energy trends could not be established. In the ceramics, timber and paper industrial sectors specific energy consumption and energy trends have been investigated by auditing drying equipment. Ceramic products examined have included tableware, tiles, sanitaryware, electrical ceramics, plasterboard, refractories, bricks and abrasives. Data from industry has shown that drying energy has not varied significantly in the ceramics sector over the last decade, representing about 31% of the total energy consumed. Information from the timber industry has established that radical changes have occurred over the last 20 years, both in terms of equipment and energy utilisation. The energy efficiency of hardwood drying has improved by 15% since the 1970s, although no significant savings have been realised for softwood. A survey estimating the energy efficiency and operating characteristics of 192 paper dryer sections has been conducted. Drying energy was found to increase to nearly 60% of the total energy used in the early 1980s, but has fallen over the last decade, representing 23% of the total in 1993. These results have demonstrated that effective energy saving measures, such as improved pressing and heat recovery, have been successfully implemented since the 1970s. Artificial neural networks have successfully been applied to model process characteristics of microwave and convective drying of paper coated gypsum cove. Parameters modelled have included product moisture loss, core gypsum temperature and quality factors relating to paper burning and bubbling defects. Evaluation of thermal and dielectric properties have highlighted gypsum's heat sensitive characteristics in convective and electromagnetic regimes. Modelling experimental data has shown that the networks were capable of simulating drying process characteristics to a high degree of accuracy. Product weight and temperature were predicted to within 0.5% and 5C of the target data respectively. Furthermore, it was demonstrated that the underlying properties of the data could be predicted through a high level of input noise.

An exploration of policies and practices used to showcase production facilities

Manufacturers who seek innovative ways in which to differentiate their products and services should not overlook the value of showcasing their production facilities. By careful design, visitors can be exposed to a series of experiences that can help to emphasize the value built into products. This topic has, however, received almost no attention by manufacturing researchers. Therefore, this paper describes a study of six manufacturers and, from this, proposes a set of guidelines for showcasing production facilities. Although exploratory, this work provides both a guide to manufacturers and a platform for more in-depth research. The guidelines and the case studies on which they are based are all described within the paper.

'Worlds of justification’ in the politics and practices of urban regeneration

A considerable body of research has developed on processes of neoliberal urban regeneration and gentrifi cation. On the one hand, there are many political economy accounts emphasising the role of economic capital in processes of urban change and gentrifi cation. On the other hand, there is a wealth of governmentality studies on the art of government that fail to explain how ungovernable subjects develop. Similarly, within gentrifi cation studies there are many accounts on the role of changing consumer lifestyles and defi ning gentrifi cation, but less concern with the governance processes between actors in urban regeneration and gentrifi cation. Yet such issues are of considerable importance given the role of the state in urban regeneration and dependence on private capital. This paper utilises the French Pragmatist approach of Boltanski and Thévenot to examine a case study state-led gentrifi cation project. Boltanski and Thévenot argue that social coordination occurs by way of actors working through broader value-laden ‘worlds of justifi cation’ that underpin processes of argumentation and coordination. The examined case study is a deprived area within an English city where a major state-led gentrification programme has been introduced. The rationale for the programme is based on the assumption that reducing deprivation relies upon substantially increasing the number of higher income earners. The paper concludes that market values have overridden broader civic values in the negotiation process, with this intensifying as the state internalised market crisis tendencies within the project. More broadly, there is a need for French Pragmatism to be more sensitive to the spatial processes of social coordination, which can be achieved through critical engagement with recent concepts of ‘assemblages’.

Bandwidth management of WiMAX systems and performance modeling

WiMAX has been introduced as a competitive alternative for metropolitan broadband wireless access technologies. It is connection oriented and it can provide very high data rates, large service coverage, and flexible quality of services (QoS). Due to the large number of connections and flexible QoS supported by WiMAX, the uplink access in WiMAX networks is very challenging since the medium access control (MAC) protocol must efficiently manage the bandwidth and related channel allocations. In this paper, we propose and investigate a cost-effective WiMAX bandwidth management scheme, named the WiMAX partial sharing scheme (WPSS), in order to provide good QoS while achieving better bandwidth utilization and network throughput. The proposed bandwidth management scheme is compared with a simple but inefficient scheme, named the WiMAX complete sharing scheme (WCPS). A maximum entropy (ME) based analytical model (MEAM) is proposed for the performance evaluation of the two bandwidth management schemes. The reason for using MEAM for the performance evaluation is that MEAM can efficiently model a large-scale system in which the number of stations or connections is generally very high, while the traditional simulation and analytical (e.g., Markov models) approaches cannot perform well due to the high computation complexity. We model the bandwidth management scheme as a queuing network model (QNM) that consists of interacting multiclass queues for different service classes. Closed form expressions for the state and blocking probability distributions are derived for those schemes. Simulation results verify the MEAM numerical results and show that WPSS can significantly improve the network's performance compared to WCPS.

Dispersion-managed solitons in fibre systems and lasers

Nonlinear systems with periodic variations of nonlinearity and/or dispersion occur in a variety of physical problems and engineering applications. The mathematical concept of dispersion managed solitons already has made an impact on the development of fibre communications, optical signal processing and laser science. We overview here the field of the dispersion managed solitons starting from mathematical theories of Hamiltonian and dissipative systems and then discuss recent advances in practical implementation of this concept in fibre-optics and lasers.

Strategy as practice:recursiveness, adaptation, and practices-in-use

In this article, a social theory framework is developed to explain the common themes of recursive and adaptive practice underpinning the existing strategic management literature. In practice, there is a coexistent tension between recursive and adaptive forms of strategic action that spans multiple levels from macro-institutional and competitive contexts to within-firm levels of analysis to individual cognition. This tension may be better understood by examining how management practices are used to put strategy into practice. Such practices span multiple levels of context and are adaptable to their circumstances of use, serving to highlight both general characteristics and localized idiosyncrasies of strategy as practice. The article develops the concept of management practices-in-use into a research agenda and nine broad research questions that may be used to investigate empirically strategy as practice.

Teams, HRM and innovation:an organisation-level analysis

For organizations to survive and prosper they have to develop new and improved products, services and ways of working. Innovation is vital for organizational survival. Much research and managerial attention is therefore devoted to understanding the factors that predict innovation in organizations. This paper describes a research study of product innovation in manufacturing organizations and explores the extent to which team based working and team working effectiveness in these organizations predict product innovation. It also considers whether combinations of good HRM systems and practices, extensive team based working and effective team working are associated with product innovation.