Evaluation of some organic compounds on bloodstream forms of Trypanosoma cruzi

Accidental transmission of Chagas' disease to man by blood transfusion is a serious problem in Latin-America. This paper describes the testing of several synthetic, semi-synthetic, and natural compounds for their activity against blood trypomastigotes in vitro at 4-C. The compounds embody several types of chemical structures: benzoquinone, naphthoquinone, anthracenequinone, phenanthrenequinone, imidazole, piperazine, quinoline, xanthene, and simple benzenic and naphthalenic derivates. Some of them are for the first time tested against Trypanosoma cruzi. The toxic effect these compounds on this parasite was done by two quite distinct sets of experiments. In one set, the compounds were added to infected blood as ethanolic solution. In this situation the most active one was a furan-1, 2-naphthoquinone, in the same range as gentian violet, a new fact to be considered in the assessment of structure-activity relationships in this class of compounds. In other set, we tentatively evaluated the biological activity of water insoluble compounds by adding them in a pure form without solvent into infected blood. In this way some appear to be very active and it was postulated that the effectiveness of such compounds must result from interactions between them and specific blood components.

A Critical Review on Chagas Disease Chemotherapy

In this "Critical Review" we made a historical introduction of drugs assayed against Chagas disease beginning in 1912 with the works of Mayer and Rocha Lima up to the experimental use of nitrofurazone. In the beginning of the 70s, nifurtimox and benznidazole were introduced for clinical treatment, but results showed a great variability and there is still a controversy about their use for chronic cases. After the introduction of these nitroheterocycles only a few compounds were assayed in chagasic patients. The great advances in vector control in the South Cone countries, and the demonstration of parasite in chronic patients indicated the urgency to discuss the etiologic treatment during this phase, reinforcing the need to find drugs with more efficacy and less toxicity. We also review potential targets in the parasite and present a survey about new classes of synthetic and natural compounds studied after 1992/1993, with which we intend to give to the reader a general view about experimental studies in the area of the chemotherapy of Chagas disease, complementing the previous papers of Brener (1979) and De Castro (1993).

Peroxisome proliferator-activated receptor agonists.

The peroxisome proliferator-activated receptors are a family of three ligand-activated transcription factors. Fibrate antihyperlipidemic drugs and thiazolidinedione antihyperglycemic drugs were recently identified as synthetic ligands for these receptors. In addition, certain unsaturated fatty acids and eicosanoids were shown to bind the receptors, and thus represent naturally occurring PPAR ligands. The synthetic and natural ligands have proven to be powerful tools in dissecting the biology of these orphan receptors.

A pirólise como técnica analítica

In this paper historical aspects of analytical pyrolysis, the equipment used, the fundamentals and the mechanisms of pyrolysis of different polymeric materials are discussed. The latest work on analytical pyrolysis applied to various types of synthetic and natural samples is reviewed. Current applications of this technique that are discussed include identification of microorganisms, analysis of trace compounds by forensic laboratories, investigation of food and agricultural products, study of the chemical composition of wood, authentication and conservation of artworks, and the study of environmental and geochemical samples.

Métodos para determinação de atividade antioxidante in vitro em substratos orgânicos

In the literature there are a considerable number of chemical and biochemical tests for evaluation of in vitro antioxidant activities of pure compounds or fractions and organic extracts. These tests are important tools for screening of synthetic and natural bioactive compound as well as they can be employed in food chemistry. This work is a critical review of the main methods employed for in vitro antioxidant determination.

Estudio de copolimerización injerto del acrilato de butilo sobre almidón empleando sistema iniciador redox

The mixture of synthetic and natural materials yields a material with improved physical-chemical properties. One way of obtaining this kind of material is through graft copolymerization. Some natural materials have been used in graft copolymerization with synthetic monomers. In this work, graft copolymerization of butyl acrylate (BA) onto starch using a redox initiator system was carried out. The graft yield was evaluated for different reaction conditions. The graft copolymer was characterized by infrared spectroscopy, thermal analysis and scanning electron microscopy (SEM).

BIOMATERIAIS: TIPOS, APLICAÇÕES E MERCADO

AbstractThe types of compounds used in the production of biomaterials, namely metals, ceramics, synthetic and natural polymers, as well as composite materials, are discussed in the present work, together with details of their application and evolution from biocompatible to bioactive, biodegradable, and biomimetic clinical products. The chemical structure, the three-dimensional structure, and the molecular organization of compounds frequently used in the manufacture of relevant classes of biomaterials are discussed, along with their advantages and some of their major limitations in specific clinical applications. The main chemical, physical, mechanical, and biological requirements of biomaterials categories are presented, as well as typical tissular responses to implanted biomaterials. Reasons for the recent economic growth of the biomaterials market segment are addressed, and the most successful biomaterial categories are discussed, emphasizing areas such as orthopedic and cardiovascular implants, regenerative medicine, tissue engineering, and controlled drug release devices. Finally, the need for the development of innovative and more accessible biomaterials, due to the expected increase in the number of elderly people and the growing trend of personalized medical procedures, is pointed out.

Produção de lipase por Fusarium oxysporum em fermentação em estado sólido e sua aplicação em reações de síntese de ésteres de biodiesel

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Formação de biofilmes e resistência a antifúngico e biocidas em Candida parapsilosis e C. orthopsilosis isoladas de águas usadas para hemodiálise

Pós-graduação em Biociências e Biotecnologia Aplicadas à Farmácia - FCFAR

Tecnologias para produção de mudas de espinheira-santa: propagação vegetativa por estacas caulinares

Pós-graduação em Agronomia (Horticultura) - FCA

Síntese e caracterização de matrizes híbridas para aplicação em sistemas de liberação controlada

Pós-graduação em Ciência dos Materiais - FEIS

Desenvolvimento de procedimentos e métodos analíticos no campo forense aplicando os princípios da química verde

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evaluation of HA-fibrin-based hydrogel for restoration of degenerated intervertebral disc

Introduction: Intervertebral disc degeneration is associated with loss of nucleus pulposus (NP) tissue and reduced disc height[1]. A number of therapies, including synthetic and natural biomaterials, have been developed to restore full disc function and to minimize the pain and disability caused by this disease. Fibrin-based biomaterials are used as a replacement for NP or as a cell carrier for tissue engineering approaches[2]. While the behavior of such gels is well-characterized from a material point of view, little is known about their contribution to intervertebral disc (IVD) restoration under dynamic loads. The aim of the present study is the evaluation of a hyaluronic acid fibrin-based hydrogel (ProCore) used to repair an in vitro model of disc degeneration under dynamic loading. Methods: In vitro model of disc degeneration was induced in intact coccygeal bovine IVD by papain digestion of the NP as previously described[3]. In order to characterize fibrin hydrogels, four experimental groups were considered: 1) intact IVD (control), 2) IVD injected with PBS, 3) injection of hydrogels in degenerative IVD and 4) injection of hydrogels in combination with human bone marrow-derived mesenchymal stem cells (MSC) in degenerative IVD. All of the groups were subjected to dynamic loading protocols consisting of 0.2MPa static compression superimposed with ±2° torsion at 0.2Hz for 8h per day and maintained for 7 days. Additionally, one group consisted of degenerative IVD injected with hydrogel and subjected to static compression. Disc heights were monitored after the duration of the loading and compared to the initial disc height. The macrostructure of the formed tissue and the cellular distribution was evaluated by histological means. Results: After one week of loading, the degenerative IVD filled with hydrogel in combination with MSC (dynamic load), hydrogels (dynamic load) and hydrogels (static load) showed a reduction in height by 30%, 15% and 20%, respectively, as compared to their initial disc height. Histological sections showed that the HA-fibrin gel fully occupied the nucleotomized region of the disc and that fibrin was effective in filling the discontinuities of the cavity region. Furthermore, the cells were homogenously distributed along the fibrin hydrogels after 7 days of loading. Discussion: In this study, we showed that fibrin hydrogels showed a good integration within the papain-induced model of disc degeneration and can withstand the applied loads. Fibrin hydrogels can contribute to disc restoration by possibly maintaining adequate stiffness of the tissue and thus preventing disorganization of the surrounding IVD. References: 1. Jarman, J.P., Arpinar, V.E., Baruah, D., Klein, A.P., Maiman, D.J., and Tugan Muftuler, L. (2014). Intervertebral disc height loss demonstrates the threshold of major pathological changes during degeneration. Eur Spine J . 2. Colombini, A., Ceriani, C., Banfi, G., Brayda-Bruno, M., and Moretti, M. (2014). Fibrin in intervertebral disc tissue engineering. Tissue Eng Part B Rev . 3. Chan, S.C., Bürki, A., Bonél, H.M., Benneker, L.M., and Gantenbein-Ritter, B. (2013). Papain-induced in vitro disc degeneration model for the study of injectable nucleus pulposus therapy. Spine J 13, 273-283. Acknowledgement We thank the Swiss National Science Foundation SNF #310030_153411 for funding.

Análisis del efecto laminador del cauce utilizando modelos fluviales bidimensionales

El método de Muskingum-Cunge, con más de 45 años de historia, sigue siendo uno de los más empleados a la hora de calcular el tránsito en un cauce. Una vez calibrado, permite realizar cálculos precisos, siendo asimismo mucho más rápido que los métodos que consideran las ecuaciones completas. Por esta razón, en el presente trabajo de investigación se llevó a cabo un análisis de su precisión, comparándolo con los resultados de un modelo hidráulico bidimensional. En paralelo se llevó a cabo un análisis de sus limitaciones y se ensayó una metodología práctica de aplicación. Con esta motivación se llevaron a cabo más de 200 simulaciones de tránsito en cauces prismáticos y naturales. Los cálculos se realizaron empleando el programa HEC-HMS con el método de Muskingum-Cunge de sección de 8 puntos, así como con la herramienta de cálculo hidráulico bidimensional InfoWorks ICM. Se eligieron HEC-HMS por su gran difusión e InfoWorks ICM por su rapidez de cálculo, pues emplea la tecnología CUDA (Arquitectura Unificada de Dispositivos de Cálculo). Inicialmente se validó el modelo hidráulico bidimensional contrastándolo con la formulación unidimensional en régimen uniforme y variado, así como con fórmulas analíticas de régimen variable, consiguiéndose resultados muy satisfactorios. También se llevó a cabo un análisis de la sensibilidad al mallado del modelo bidimensional aplicado a tránsitos, obteniéndose unos ábacos con tamaños recomendados de los elementos 2D que cuantifican el error cometido. Con la técnica del análisis dimensional se revisó una correlación de los resultados obtenidos entre ambos métodos, ponderando su precisión y definiendo intervalos de validez para la mejor utilización del método de Muskingum-Cunge. Simultáneamente se desarrolló una metodología que permite obtener la sección característica media de 8 puntos para el cálculo de un tránsito, basándose en una serie de simulaciones bidimensionales simplificadas. De este modo se pretende facilitar el uso y la correcta definición de los modelos hidrológicos. The Muskingum-Cunge methodology, which has been used for more 45 than years, is still one of the main procedures to calculate stream routing. Once calibrated, it gives precise results, and it is also much faster than other methods that consider the full hydraulic equations. Therefore, in the present investigation an analysis of its accuracy was carried out by comparing it with the results of a two-dimensional hydraulic model. At the same time, reasonable ranges of applicability as well as an iterative method for its adequate use were defined. With this motivation more than 200 simulations of stream routing were conducted in both synthetic and natural waterways. Calculations were performed with the aid of HEC-HMS choosing the Muskingum-Cunge 8 point cross-section method and in InfoWorks ICM, a two-dimensional hydraulic calculation software. HEC-HMS was chosen because its extensive use and InfoWorks ICM for its calculation speed as it takes advantage of the CUDA technology (Compute Unified Device Architecture). Initially, the two-dimensional hydraulic engine was compared to one-dimensional formulation in both uniform and varied flow. Then it was contrasted to variable flow analytical formulae, achieving most satisfactory results. A sensitivity size analysis of the two-dimensional rooting model mesh was also conduced, obtaining charts with suggested 2D element sizes to narrow the committed error. With the technique of dimensional analysis a correlation of results between the two methods was reviewed, assessing their accuracy and defining valid intervals for improved use of the Muskingum-Cunge method. Simultaneously, a methodology to draw a representative 8 point cross-section was developed, based on a sequence of simplified two-dimensional simulations. This procedure is intended to provide a simplified approach and accurate definition of hydrological models.

The conducting form of gramicidin A is a right-handed double-stranded double helix

The linear pentadecapeptide antibiotic, gramicidin D, is a naturally occurring product of Bacillus brevis known to form ion channels in synthetic and natural membranes. The x-ray crystal structures of the right-handed double-stranded double-helical dimers (DSDHℛ) reported here agree with 15N-NMR and CD data on the functional gramicidin D channel in lipid bilayers. These structures demonstrate single-file ion transfer through the channels. The results also indicate that previous crystal structure reports of a left-handed double-stranded double-helical dimer in complex with Cs+ and K+ salts may be in error and that our evidence points to the DSDHℛ as the major conformer responsible for ion transport in membranes.