18F-FDG measurement in primary lung cancer: SUV normalization to different distribution volumes

Introduction: Standard Uptake Value (SUV) is a measurement of the uptake in a tumour normalized on the basis of a distribution volume and is used to quantify 18F-Fluorodeoxiglucose (FDG) uptake in tumors, such as primary lung tumor. Several sources of error can affect its accuracy. Normalization can be based on body weight, body surface area (BSA) and lean body mass (LBM). The aim of this study is to compare the influence of 3 normalization volumes in the calculation of SUV: body weight (SUVW), BSA (SUVBSA) and LBM (SUVLBM), with and without glucose correction, in patients with known primary lung tumor. The correlation between SUV and weight, height, blood glucose level, injected activity and time between injection and image acquisition is evaluated. Methods: Sample included 30 subjects (8 female and 22 male) with primary lung tumor, with clinical indication for 18F-FDG Positron Emission Tomography (PET). Images were acquired on a Siemens Biography according to the department’s protocol. Maximum pixel SUVW was obtained for abnormal uptake focus through semiautomatic VOI with Quantification 3D isocontour (threshold 2.5). The concentration of radioactivity (kBq/ml) was obtained from SUVW, SUVBSA, SUVLBM and the glucose corrected SUV were mathematically obtained. Results: Statistically significant differences between SUVW, SUVBSA and SUVLBM and between SUVWgluc, SUVBSAgluc and SUVLBMgluc were observed (p=0.000<0.05). The blood glucose level showed significant positive correlations with SUVW (r=0.371; p=0.043) and SUVLBM (r=0.389; p=0.034). SUVBSA showed independence of variations with the blood glucose level. Conclusion: The measurement of a radiopharmaceutical tumor uptake normalized on the basis of different distribution volumes is still variable. Further investigation on this subject is recommended.

Waste recovery into activated carbon for water purification from heavy metals

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Química Pela Universidade Nova de Lisboa,Faculdade de Ciências e Tecn

Determinação dos valores de referência da excursão sistólica do plano do anel tricúspide (TAPSE) em crianças saudáveis

Mestrado em Tecnologia de Diagnóstico e Intervenção Cardiovascular - Área de especialização: Ultrassonografia cardiovascular

Development of 2-oxazoline-based hydrogels and porous polyester microparticles in scCO2

Thesis submitted to Faculdade de Ciências e Tecnologia from Universidade Nova de Lisboa in partial fulfillment of the requirements for the obtention of the degree of Master of Science in Biotechnology

Robustness of corroded reinforced concrete structures. A structural performance approach

Structure and Infrastructure Engineering, 1-17

Supercondensadores

Uma nova tecnologia, os EDLC, também denominados por supercondensadores, tem-se tornado numa importante e aliciante área de interesse. Estes regem-se pelos mesmos princípios fundamentais dos condensadores clássicos, no entanto possibilitam receber capacidades superiores, devido a uma maior área de superfície e a um dielétrico menos espesso. Esta particularidade permite obter uma maior densidade energética, comparativamente com os condensadores clássicos e uma maior densidade de potência, comparativamente com as baterias. Consequentemente a utilização de supercondensadores tem aumentado, representando já uma alternativa fiável, segura e amiga do ambiente, em detrimento das baterias comuns. Assim, este projeto tem como principais objetivos, identificar os diferentes tipos de supercondensadores, apresentar as vantagens de cada tipo e explorar a sua resposta, quer no domínio das frequências quer no domínio dos tempos, e por fim modelá-los recorrendo a componentes elétricos clássicos, nomeadamente resistências e condensadores. A modelação foi realizada recorrendo ao MALTAB, através da função de minimização fminunc e foram construídos quatro modelos equivalentes, com o objetivo de modelar a resposta dos vários EDLC analisados. Por escassez de tempo o principal foco de análise recaiu sobre o EDLC de 0,022 F.

Development of electrospun Ion jelly fibers® for drug delivery

Dissertação para obtenção do Grau de Mestre em Biotecnologia

The Self-Inflicted Burns - Typology and its Prognostic Relevance in a 14-Year Review of Self-Inflicted Burns in a Tertiary Referral Centre

Self-inflicted burns (SIB) are responsible for 2-6% of admissions to Burn Units in Europe and North America, and for as many as 25% of admissions in developing nations. Recently, a promising new tool was proposed to stratify SIB patients in the following subgroups: "typical", "delirious", and "reactive". However, as far as the authors know, the clinical usefulness of this instrument has not yet been validated by others. We retrospectively reviewed the clinical records of 56 patients admitted to our Burn Unit with the diagnosis of SIB injury in the past 14 years. The following parameters were evaluated: demographic features; psychiatric illness; substance abuse; mechanism of injury; burn depth, total body surface area (TBSA) involved, Abbreviated Burn Severity Index (ABSI); length of hospital stay, and mortality. All patients were followed up by a psychologist and a psychiatrist, and were classified according to the SIB-Typology Tool, into three classes: "typical", "delirious" and "reactive". There was a slight predominance of the "typical" type (44.6%), followed by the "delirious" type (30.4%), and, finally the "reactive" type (25.0%). Mortality was significantly higher in the "typical" subgroup. In conclusion, the SIB-Typology Tool appears to be a valuable instrument in the clinical management of SIB patients.

Modelos Teóricos de Difusão Dérmica: abordagens matemáticas e computacionais para terapias transdérmicas da Obesidade

É de senso comum que os nutrientes são fundamentais à vida e que a subnutrição leva à acumulação de gorduras que pode chegar a casos de obesidade, tendo como consequência inúmeras complicações de saúde. Diferentes estruturas neuroanatómicas do cérebro têm um papel essencial no comportamento digestivo. A ação de várias moléculas de sinalização (hormonas, neurotransmissores e neuropéptidos) resulta na regulação da ingestão de alimentos, sendo que, por exemplo, algumas hormonas podem aumentar a sensação de saciedade podendo diminuir o apetite e a ingestão calórica. A descoberta de hormonas envolvidas no balanço energético proporcionou novas oportunidades para desenvolver meios para o tratamento da obesidade. A transferência de medicação antiobesidade por via tópica ou transdérmica é um desafio pois a pele funciona como uma barreira natural e protetora. Sendo uma barreira com uma grande área de superfície e de fácil acessibilidade, a pele tem potencial interesse na libertação de fármacos específicos a cada terapia. Vários métodos têm sido estudados de modo a permitir um aumento da permeabilidade de moléculas terapêuticas para o interior da pele e através da pele. As biotecnologias transdérmicas são um campo de interesse cada vez maior, devido as aplicações dérmicas e farmacêuticas que lhes estão subjacentes. Existem vários modelos computacionais e matemáticos em uso que permite uma visão mais abrangente de puros dados experimentais e até mesmo permite a extrapolação prática de novas metodologias de difusão dérmica. Contudo, eles compreendem uma complexa variedade de teorias e suposições que atribuem a sua utilização para situações específicas. Este trabalho, primeiramente analisa, de forma extensiva, as várias metodologias teóricas para o estudo da difusão dérmica e sistematiza as suas características, realizando depois a fase prévia duma nova abordagem computacional para o estudo da difusão dérmica, que determina características microscópicas de moléculas capazes de provocar a perda de peso, tais como a Leptina e/ou os seus agonistas.

A further investigation of the cytochrome b5–cytochrome c complex

J Biol Inorg Chem (2003) 8: 777–786 DOI 10.1007/s00775-003-0479-y

Validation of alternative additives for paste production

Dissertation presented to confer Master Degree in Chemical and Biochemical Engineering

Development of chitosan-based microparticles for pulmonary drug delivery

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Sepsis in burned patients

A prospective study was conducted from June 2001 to May 2002 at the Burns Unit of Hospital Regional da Asa Norte, Brasília, Brazil. During the period of the study, 252 patients were treated at the Burns Unit, 49 (19.4%) developed clinically and microbiologically proven sepsis. Twenty-six (53.1%) were males and 23 (46.9%) females with a mean age of 22 years (range one to 89 years) and mean burned body surface area of 37.7 ± 18.4% (range 7 to 84%). Forty-three patients had flame burns, five a scald and one an electric burn. These 49 patients had a total of 62 septic episodes. Forty (81.6%) patients had only one and nine (18.4%) had up to three episodes of sepsis. Thirty (61.2%) patients had their first septicemic episode either earlier or by one week postburn. Out of 62 septic episodes, 58 were due to bacteria and four due to Candida sp. The most common bacteria isolated from blood culture were Staphylococcus aureus, coagulase-negative Staphylococcus, Acinetobacter baumannii, Enterobacter cloacae and Klebsiella pneumoniae. Eleven (18.9%) episodes were due to oxacillin resistant Staphylococcus aureus. Acinetobacter baumannii was sensitive to ampicillin/sulbactam in 71.4% and to imipenem in 85.7% of the cases. The primary foci of sepsis were the burn wound in 15 ( 24.2% ) episodes. The most common clinical findings of sepsis in these patients were fever, dyspnea, hypotension and oliguria. The most common laboratory findings of these patients were anemia, leukocytosis, hypoalbuminemia and thrombocytopenia. Twelve (24.5%) patients died. The appropriate knowledge of clinical, epidemiological, laboratorial and microbiological aspects of sepsis in burned patients permits an adequate diagnosis and treatment of this complication.

Role of surfactants in filtration and fouling of colloidal silica

The EM3E Master is an Education Programme supported by the European Commission, the European Membrane Society (EMS), the European Membrane House (EMH), and a large international network of industrial companies, research centres and universities

Design and development of a microfluidic platform for use with colorimetric gold nanoprobe assays

Due to the importance and wide applications of the DNA analysis, there is a need to make genetic analysis more available and more affordable. As such, the aim of this PhD thesis is to optimize a colorimetric DNA biosensor based on gold nanoprobes developed in CEMOP by reducing its price and the needed volume of solution without compromising the device sensitivity and reliability, towards the point of care use. Firstly, the price of the biosensor was decreased by replacing the silicon photodetector by a low cost, solution processed TiO2 photodetector. To further reduce the photodetector price, a novel fabrication method was developed: a cost-effective inkjet printing technology that enabled to increase TiO2 surface area. Secondly, the DNA biosensor was optimized by means of microfluidics that offer advantages of miniaturization, much lower sample/reagents consumption, enhanced system performance and functionality by integrating different components. In the developed microfluidic platform, the optical path length was extended by detecting along the channel and the light was transmitted by optical fibres enabling to guide the light very close to the analysed solution. Microfluidic chip of high aspect ratio (~13), smooth and nearly vertical sidewalls was fabricated in PDMS using a SU-8 mould for patterning. The platform coupled to the gold nanoprobe assay enabled detection of Mycobacterium tuberculosis using 3 8l on DNA solution, i.e. 20 times less than in the previous state-of-the-art. Subsequently, the bio-microfluidic platform was optimized in terms of cost, electrical signal processing and sensitivity to colour variation, yielding 160% improvement of colorimetric AuNPs analysis. Planar microlenses were incorporated to converge light into the sample and then to the output fibre core increasing 6 times the signal-to-losses ratio. The optimized platform enabled detection of single nucleotide polymorphism related with obesity risk (FTO) using target DNA concentration below the limit of detection of the conventionally used microplate reader (i.e. 15 ng/μl) with 10 times lower solution volume (3 μl). The combination of the unique optical properties of gold nanoprobes with microfluidic platform resulted in sensitive and accurate sensor for single nucleotide polymorphism detection operating using small volumes of solutions and without the need for substrate functionalization or sophisticated instrumentation. Simultaneously, to enable on chip reagents mixing, a PDMS micromixer was developed and optimized for the highest efficiency, low pressure drop and short mixing length. The optimized device shows 80% of mixing efficiency at Re = 0.1 in 2.5 mm long mixer with the pressure drop of 6 Pa, satisfying requirements for the application in the microfluidic platform for DNA analysis.