Modelagem de Superfícies Seletivas de Freqüência e Antenas de Microfita utilizando Redes Neurais Artificiais

This work has as main objective the application of Artificial Neural Networks, ANN, in the resolution of problems of RF /microwaves devices, as for example the prediction of the frequency response of some structures in an interest region. Artificial Neural Networks, are presently a alternative to the current methods of analysis of microwaves structures. Therefore they are capable to learn, and the more important to generalize the acquired knowledge, from any type of available data, keeping the precision of the original technique and adding the low computational cost of the neural models. For this reason, artificial neural networks are being increasily used for modeling microwaves devices. Multilayer Perceptron and Radial Base Functions models are used in this work. The advantages/disadvantages of these models and the referring algorithms of training of each one are described. Microwave planar devices, as Frequency Selective Surfaces and microstrip antennas, are in evidence due the increasing necessities of filtering and separation of eletromagnetic waves and the miniaturization of RF devices. Therefore, it is of fundamental importance the study of the structural parameters of these devices in a fast and accurate way. The presented results, show to the capacities of the neural techniques for modeling both Frequency Selective Surfaces and antennas

Estudo térmico e de materiais de um compósito à base de gesso e EPS para construção de casas populares

A housing unit was built to study the thermal performance, and of material using a composite made of gypsum and EPS ground. We used two techniques of construction, using blocks, and filling on the spot. Two compositions of the composite were studied. The blocks were fixed using conventional mortar. In the technical of filling on the spot were used PET bottles up inside the walls to provide mechanical and thermal resistance. Compression tests were realized according to the ABNT standard of sealing bricks. It is going to be shown an analysis of the thermal comfort through the use of thermocouples placed on the walls of the building, internally and externally. The manufacturing viability of houses, using recyclable materials, through the use of composite materials proposed will be demonstrated. The constructive aspects showing the advantages and disadvantages of the technique used also will be broached. The block used presents structural functions and thermal insulating, is low cost and represents an alternative to the use of EPS and PET bottles which are materials that end up occupying much space in the landfills, giving than an ecologically correct use. The results of thermal analysis shows the thermal comfort provided by the composite by the obtainment of a difference between the internal and external surfaces of the walls more exposed to the sun around 7º C. The average temperature of the air inside the building, around 28.0 º C was below the zone of thermal comfort recommended for countries with hot weather

Laminados compósitos de PRFV: efeitos da descontinuidade geométrica e do envelhecimento ambiental acelerado

The growing demand in the use of composite materials necessitates a better understanding of its behavior related to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. Within these project conditions are highlighted the presence of geometrical discontinuities in the area of cross and longitudinal sections of structural elements and environmental conditions of work like UV radiation, moisture, heat, leading to a decrease in final mechanical response of the material. In this sense, this thesis aims to develop studies detailed (experimental and semi-empirical models) the effects caused by the presence of geometric discontinuity, more specifically, a central hole in the longitudinal section (with reduced cross section) and the influence of accelerated environmental aging on the mechanical properties and fracture mechanism of FGRP composite laminates under the action of uniaxial tensile loads. Studies on morphological behavior and structural degradation of composite laminates are performed by macroscopic and microscopic analysis of affected surfaces, in addition to evaluation by the Measurement technique for mass variation (TMVM). The accelerated environmental aging conditions are simulated by aging chamber. To study the simultaneous influence of aging/geometric discontinuity in the mechanical properties of composite laminates, a semiempirical model is proposed and called IE/FCPM Model. For the stress concentration due to the central hole, an analisys by failures criteria were performed by Average-Stress Criterion (ASC) and Point-Stress Criterion (PSC). Two polymeric composite laminates, manufactured industrially were studied: the first is only reinforced by short mats of fiberglass-E (LM) and the second where the reinforced by glass fiber/E comes in the form of bidirectional fabric (LT). In the conception configurations of laminates the anisotropy is crucial to the final mechanical response of the same. Finally, a comparative study of all parameters was performed for a better understanding of the results. How conclusive study, the characteristics of the final fracture of the laminate under all conditions that they were subjected, were analyzed. These analyzes were made at the macroscopic level (scanner) microscope (optical and scanning electron). At the end of the analyzes, it was observed that the degradation process occurs similarly for each composite researched, however, the LM composite compared to composite LT (configurations LT 0/90º and LT ±45º) proved to be more susceptible to loss of mechanical properties in both regarding with the central hole as well to accelerated environmental aging

Análise da influência de superfícies refletivas nas perdas de calor de sistema térmicos

The use of reflective surfaces functioning as thermal insulator has grown significantly over the years. Reflective thermal insulator are materials that have several characteristics such as low emissivity, low absorptivity and high reflectivity in the infrared spectrum. The use of these materials has grown a lot lately, since it contains several important radioactive properties that minimize the heat loss of thermal systems and cooling systems that are used to block the heat on the roof of buildings. A system made of three surfaces of 316 stainless steel mirror was built to analyze the influence of reflective surfaces as a way to reduce the heat loss and thereby conserve the energy of a thermal system. The system was analyzed both with and without the presence of vacuum, and then compared with a system that contained glass wool between the stainless steel mirror walls, since this isolator is considered resistive and also broadly used around the world in thermal systems. The reflectivity and emissivity of the surfaces used were also measured in this experiment. A type K thermocouple was fixed on the wall of the system to obtain the temperature of the stainless steel mirror surfaces and to analyze the thermal behavior of each configuration used. The results showed an efficiency of 13% when the reflective surfaces were used to minimize the heat loss of the thermal system. However, the system with vacuum had the best outcome, a 60% efficiency. Both of these were compared to the system made of glass wool as a thermal insulator

Tensão superficial dinâmica e ângulo de contato de soluções aquosas com surfatantes em superfícies artificiais e naturais

O trabalho objetivou avaliar o efeito de surfatantes em soluções aquosas sobre a tensão superficial dinâmica e ângulo de contato das gotas em diferentes superfícies: artificiais (lâmina de vidro e de óxido de alumínio) e naturais (superfícies adaxiais de folhas de Euphorbia heterophylla, Ipomoea grandifolia e Brachiaria plantaginea). Seis formulações de surfatantes (Antideriva®; Uno®; Pronto 3®; Li-700®; Supersil® e Silwet L-77®), respectivamente nas doses recomendadas do produto comercial (0,050; 0,025; 0,100; 0,250; 0,100 e 0,100 % v v-1) e o dobro delas, foram avaliadas em soluções aquosas. A tensão superficial dinâmica e o ângulo de contato formado sobre as superfícies naturais foram medidos por tensiômetro. Os ângulos de contato formados pelas gotas nas superfícies artificiais foram obtidos por análise de imagens capturadas por uma câmera digital. Os surfatantes influenciam nas propriedades físico-químicas de soluções aquosas. As soluções contendo os surfatantes Silwet L-77® e Supersil®; nas doses de 0,100 e 0,200% v v-1; proporcionaram maiores reduções na tensão superficial dinâmica e menores ângulos de contato das gotas sobre as superfícies artificiais e naturais. Os surfatantes organossiliconados em solução aquosa foram mais eficientes na redução da tensão superficial e proporcionaram maior molhamento de superfícies natural e artificial. em alvos naturais, essas propriedades obtidas com organossiliconados são dependentes das características de superfície das espécies vegetais.

Estimativas das componentes da radiação solar incidente em superfícies inclinadas baseadas na radiação global horizontal

Statistics equations and validations with groups of annual and monthly data were evaluated for global, direct and diffuse solar radiation components incident on the tilted surface to 12.85, 22.85 and 32.85 degrees with the face North, in climate and geographical conditions of Botucatu, SP. It was employed the fractions of three components of extraterrestrial radiation in correlation with the coefficient clearness index horizontal plane, in a database of April/1998 to December/2007, whose measures at different periods in three inclinations, however concomitant to the horizontal plane. Increasing the angle of the surface led to increased scattering of the daily values of clearness index for inclined and horizontal surfaces. In annual groups, the lower performances were observed in the estimation of inclined daily diffuse radiation, with maximum Root Mean Square Error to 3.89 MJ m(-2) d(-1) (43.65%) and adjustments around 62%. In estimates of global and direct components of solar radiation on inclined planes, both annual and monthly equations can be applied, with performance dependents to climatic conditions.

Estimativa da radiação global incidente em superfícies inclinadas por modelos isotrópicos e índice de claridade

O objetivo deste trabalho foi avaliar o desempenho de modelos isotrópicos de estimativa do total de radiação incidente em superfícies inclinadas e propor estimativas com base nas correlações entre os índices de claridade horizontais e inclinados, em diferentes condições de cobertura de céu, em Botucatu, SP. Foram avaliadas superfícies com inclinação de 12,85º, 22,85º e 32,85º, pelos modelos isotrópicos propostos por Liu & Jordan, Revfeim, Jimenez & Castro, Koronakis, a teoria Circunsolar, e a correlação entre os índices de claridade horizontais e inclinados, para diferentes condições de cobertura de céu. O banco de dados de radiação global utilizado corresponde ao período de 1998 a 2007, com intervalos de 4/1998 a 8/2001 para a inclinação de 22,85º, de 9/2001 a 2/2003 para 12,85º e de 1/2004 a 12/2007 para 32,85º. O desempenho dos modelos foi avaliado pelos indicadores estatísticos erro absoluto médio, raiz quadrada do quadrado médio do erro e índice d de Wilmott. Os modelos de Liu & Jordan, Koronakis e de Revfeim apresentaram os melhores desempenhos em dias nublados, em todas as inclinações. As coberturas de céu parcialmente difuso e parcialmente aberto, nos maiores ângulos de inclinação, apresentaram as maiores dispersões entre valores estimados e medidos, independentemente do modelo. As equações estatísticas apresentaram bons resultados em aplicações com agrupamentos de dados mensais.

Utilização de microemulsões como agentes modificadores de superfícies para remoção de íons metálicos

The heavy metals are used in many industrial processes and when discharged to the environment can cause harmful effects to human, plants and animals. The adsorption technology has been used as an effective methodology to remove metallic ions. The search for new adsorbents motivated the development of this research, accomplished with the purpose of removing Cr (III) from aqueous solutions. Diatomite, chitosan, Filtrol 24TM and active carbon were used as adsorbents. To modify the adsorbent surface was used a bicontinuous microemulsion composed by water (25%), kerosene (25%), saponified coconut oil (10%) and as co-surfactant isoamyl or butyl alcohols (40%). With the objective of developing the best operational conditions the research started with the surfactant synthesis and after that the pseudo-ternary diagrams were plotted. It was decided to use the system composed with isoamyl alcohol as co-surfactant due its smallest solubility in water. The methodology to impregnate the microemulsion on the adsorbents was developed and to prepare each sample was used 10 g of adsorbent and 20 mL of microemulsion. The effect of drying time and temperature was evaluated and the best results were obtained with T = 65 ºC and t = 48 h. After evaluating the efficiency of the tested adsorbents it was decided to use chitosan and diatomite. The influence of the agitation speed, granule size, heavy metal synthetic solution concentration, pH, contact time between adsorbent and metal solution, presence or not of NaCl and others metallic ions in the solution (copper and nickel) were evaluated. The adsorption isotherms were obtained and Freundlich and Langmuir models were tested. The last one correlated better the data. With the purpose to evaluate if using a surfactant solution would supply similar results, the adsorbent surface was modified with this solution. It was verified that the adsorbent impregnated with a microemulsion was more effective than the one with a surfactant solution, showing that the organic phase (kerosene) was important in the heavy metal removal process. It was studied the desorption process and verified that the concentrated minerals acids removed the chromium from the adsorbent surface better than others tested solutions. The treatment showed to be effective, being obtained an increase of approximately 10% in the chitosan s adsorption capacity (132 mg of Cr3+ / g adsorbent), that was already quite efficient, and for diatomite, that was not capable to remove the metal without the microemulsion treatment, it was obtained a capacity of 10 mg of Cr3+ / g adsorbent, checking the applied treatment effectiveness

Níveis crescentes de saturação por bases e desenvolvimento inicial de teca em um latossolo de textura média

Teak is a forest species of high commercial value, but the little knowledge on the behavior of this species in relation to soil acidity is an important factor that may limit its cultivation. The aim of this study was to evaluate the effect of high base saturation on the soil on the initial development of teak (Tectona grandis L.f.). The experiment was conducted in a greenhouse, in plastic containers with capacity of 50 liters. The experimental design was randomized, with five treatments and four replications. The treatments consisted of: natural saturation of the soil and the other treatments with 20 %, 40 %, 60 % and 80 % of saturation. Correcting the soil favored the growth characteristics of all evaluated plant teak. The liming positively affected the uptake of N, P, K, Ca, Mg, B, Cu and Fe, and the nutritional requirements of the species had the following order: N > Ca > K > Mg > P > S > Fe > Mn > B > Zn > Cu. Base saturations above 70 % showed higher plant development.

Influência dos modelos digitais de terreno na modelagem de circulação hidrodinâmica 2DH: um estudo de caso

Digital Elevation Models (DEM) are numerical representations of a portion of the earth surface. Among several factors which affect the quality of a DEM, it should be emphasized the attention on the input data and the choice of the interpolating algorithm. On the other hand, several numerical models are used nowadays to characterize nearshore hydrodynamics and morphological changes in coastal areas, whose validation is based on field data collection. Independent on the complexity of the physical processes which are modeled, little attention has been given to the intrinsic bathymetric interpolation built within the numerical models of the specific application. Therefore, this study aims to investigate and to quantify the influence of the bathymetry, as obtained by a DEM, on the hydrodynamic circulation model at a coastal stretch, off the coast of the State of Rio Grande do Norte, Northeast Brazil. This coastal region is characterized by strong hydrodynamic and littoral processes, resulting in a very dynamic morphology with shallow coastal bathymetry. Important economic activities, such as oil exploitation and production, fisheries, salt ponds, shrimp farms and tourism, also bring impacts upon the local ecosystems and influence themselves the local hydrodynamics. This fact makes the region one of the most important for the development of the State, but also enhances the possibility of serious environmental accidents. As a hydrodynamic model, SisBaHiA® - Environmental Hydrodynamics System ( Sistema Básico de Hidrodinâmica Ambiental ) was chosen, for it has been successfully employed at several locations along the Brazilian coast. This model was developed at the Coastal and Oceanographical Engineering Group of the Ocean Engineering Program at the Federal University of Rio de Janeiro. Several interpolating methods were tested for the construction of the DEM, namely Natural Neighbor, Kriging, Triangulation with Linear Interpolation, Inverse Distance to a Power, Nearest Neighbor, and Minimum Curvature, all implemented within the software Surfer®. The bathymetry which was used as reference for the DEM was obtained from nautical charts provided by the Brazilian Hydrographic Service of the Brazilian Navy and from a field survey conducted in 2005. Changes in flow velocity and free surface elevation were evaluated under three aspects: a spatial vision along three profiles perpendicular to the coast and one profile longitudinal to the coast as shown; a temporal vision from three central nodes of the grid during 30 days; a hodograph analysis of components of speed in U and V, by different tidal cycles. Small, but negligible, variations in sea surface elevation were identified. However, the differences in flow and direction of velocities were significant, depending on the DEM

Slogans políticos em campanhas eleitorais no Rio Grande do Norte: a mídia na disputa ideológica.

To the observe the periods of electoral campaigns, we can realize sharply the abundance of political propaganda that announces the candidates, their campaign record, their proposed and everything that can carry them to the victory in the urns. The propaganda is today an essential tool in the votes dispute, in consequence of this, there is, in Brazil, the increasing participation of the Politics Parties in seminars of electoral marketing. They are varied strategies of the media used in the divulging of the candidacies, among them the slogan. Instigated by the explicit relation media/political, this work intends to investigate the ideologies (values) announced by the slogans of political propaganda that circulated in electoral periods. Thus, we base on the theory of the Circle of Bakhtin, who considers the statement as unit of the verbal communication, and that conceives the language as phenomenon dialogical, and, too, in the conceptions of alien words, social voices and dialogical relations formulated by the referred theory. We use, for better to comprehend, the slogan as strategy mediatic, of the classical study done by Olivier Reboul concerning the slogan; and, like starting point of a conception about ideology, studied John Thompson to comprehends the ideological phenomenon. Our corpus it constitutes of 14 political slogans announced in the campaigns for mayor of the cities in Natal and Mossoró, both located in Rio Grande do Norte s state, Brazil, in 1996, 2000 and 2004. For the analysis of these slogans, we consider the social-historical context in which were announced, being contemplated the linguistic and discursive aspect, according to the following methodological order: the identification of alien words (interdiscours); the social voices and the kinds dialogical relations established; and, finally, the ideology announced by the statement. This way, we can arrive to the conclusion that in the electoral context occurs a true ideologies war , in other words, in the political game of an electoral campaign, the slogans announces different values, which vary in several factors function, for example, the historicity, the subject that enunciates, the discursive positionings.

Relação entre índices fisiológicos aeróbios e desempenho em provas de curta e média duração em ciclistas de elite

Poucos são os estudos que possibilitam verificar quais as respostas fisiológicas são associadas ao desempenho em uma amostra de ciclistas de elite nacional. Portanto, o objetivo do presente estudo foi determinar e relacionar diferentes índices fisiológicos aeróbios com o desempenho em testes contra relógio de 4 e 20km em ciclistas de alto nível. A amostra foi composta por 14 ciclistas profissionais de elite nacional do sexo masculino (28,5 ± 4,7 anos, 73,47 ± 8,29 kg, 176 ± 6,76 cm), que realizaram um teste progressivo em laboratório para a determinação do consumo máximo de oxigênio (VO2max: 62,23 ± 8,28 ml·kg·min-1), intensidade relativa ao VO2max (iVO2max: 500,83 ± 58,65 w), economia de movimento (EM: 0,1166 ± 0,0362 ml·kg·min·w-1) e 1º e 2º limiares ventilatórios (LV1: 348,21 ± 43,26 w; LV2: 417,86 ± 60,79 w, respectivamente). Também foram submetidos a duas provas de 4 e 20km contra relógio. Para correlação entre os índices fisiológicos e desempenho, foi utilizado o coeficiente de correlação de Pearson (p< 0,05). Não foi encontrada correlação entre os índices fisiológicos (VO2max absoluto e relativo, iVO2max, EM, LV1 e LV2) e o desempenho de 4km (r= 0.38; 0.16; -0.33; 0.20; -0.50; -0.20, respectivamente) e 20km (r= 0.24; 0.01; -0.13; -0.12; -0.48; -0.19, respectivamente) contra relógio em atletas de alto nível. Estes resultados sugerem que tais variáveis não apresentam capacidade de explicar o desempenho em provas de contra relógio nas respectivas distâncias, provavelmente, devido à homogeneidade entre os sujeitos.

O discurso do grotesco na mídia digital

This study presents our research on the discourse of the grotesque in digital media, specifically in two blogs. We rely on the theoretical-conceptual and methodological discourse analysis of the French School. We analyzed a set of posts in the following blogs: Eu Sou Ryca and Cleycianne, and we did it based on some propositions on the discourse of the grotesque by Mikhail Bakhtin (1999a), Muniz Sodré and Raquel Paiva (2002), Wolfgang Kayser (2003) and Mary Russo (2000). The expressions of the grotesque analyzed in the blogs Eu Sou Ryca and Cleycianne result predominantly in humorous effect, obtained by means of irony and parodization, which calls for ridicule and relegation, through a strong tension between the beautiful and the ugly, the socially acceptable and the aberration, the taste for the strange and the aesthetically striking. The grotesque appears initially as a significant feature of ornamental paintings found in Roman caves in the late fifteenth century, and today it can be seen permeating from sculptures, paintings, literary works, talk shows for television, videos hosted in cyberspace, specifically in the collective domain of weblogs. This work seeks to analyze how the discourse of the grotesque constitutes the humorous process in its insertion in cyberspace

A argumentação como elemento discursivo na mídia digital: um estudo sobre o blog fatos e dados

This thesis studies the use of argumentation as a discursive element in digital media, particularly blogs. We analyzed the Blog "Fatos e Dados" [Facts and Data], created by Petrobras in the context of allegations of corruption that culminated in the installation of a Parliamentary Commission of Inquiry to investigate the company within the Congress. We intend to understand the influence that the discursive elements triggered by argumentation exercise in blogs and about themes scheduling. To this end, we work with notions of argumentation in dialogue with questions of language and discourse from the work of Charaudeau (2006), Citelli (2007), Perelman & Olbrechts-Tyteca (2005), Foucault (2007, 2008a), Bakhtin (2006) and Breton (2003). We also observe our subject from the perspective of social representations, where we seek to clarify concepts such as public image and the use of representations as argumentative elements, considering the work of Moscovici (2007). We also consider reflections about hypertext and the context of cyberculture, with authors such as Levy (1993, 1999, 2003), Castells (2003) and Chartier (1999 and 2002), and issues of discourse analysis, especially in Orlandi (1988, 1989, 1996 and 2001), as well as Foucault (2008b). We analyzed 118 posts published in the first 30 days of existence of the blog "Fatos e Dados" (between 2 June and 1 July 2009), and analyzed in detail the top ten. A corporate blog aims to defend the points of view and public image of the organization, and, therefore, uses elements of social representations to build their arguments. It goes beyond the blog, as the main news criteria, including the posts we reviewed, the credibility of Petrobras as the source of information. In the posts analyzed, the news values of innovation and relevance also arise. The controversy between the Blog and the press resulted from an inadequacy and lack of preparation of media to deal with a corporate blog that was able to explore the characteristics of liberation of the emission pole in cyberculture. The Blog is a discursive manifestation in a concrete historical situation, whose understanding and attribution of meaning takes place from the social relations between subjects that, most of the time, place themselves in discursive and ideological dispute between each other - this dispute also affects the movements of reading and reading production. We conclude that intersubjective relationships that occur in blogs change, in the form of argumentative techniques used, the notions of news criteria, interfering with scheduling of news and organization of information in digital media outlets. It is also clear the influence that the discursive elements triggered by argumentation exercise in digital media, trying to resize and reframe frames of reality conveyed by it in relation to the subject-readers. Blogs have become part of the scenario information with the emergence of the Internet and are able to interfere in a more effective way to organize the scheduling of media from the conscious utilization of argumentative elements in their posts

Microfilme: literatura e mídia no correio feminino de Clarice Lispector

Conselho Nacional de Desenvolvimento Científico e Tecnológico