932 resultados para Subgrid Scale Model


Relevância:

30.00% 30.00%

Publicador:

Resumo:

The main objective of the study was to define the methodology for assessing the limits for application island grids instead of interconnecting with existing grid infrastructure. The model for simulation of grid extension distance and levelised cost of electricity has been developed and validated by the case study in Finland. Thereafter, sensitivities of the application limits were examined with the respect to operational environment, load conditions, supply security and geographical location. Finally, recommendations for the small-scale rural electrification projects in the market economy environment have been proposed.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

As increasing efficiency of a wind turbine gearbox, more power can be transferred from rotor blades to generator and less power is used to cause wear and heating in the gearbox. By using a simulation model, behavior of the gearbox can be studied before creating expensive prototypes. The objective of the thesis is to model a wind turbine gearbox and its lubrication system to study power losses and heat transfer inside the gearbox and to study the simulation methods of the used software. Software used to create the simulation model is Siemens LMS Imagine.Lab AMESim, which can be used to create one-dimensional mechatronic system simulation models from different fields of engineering. When combining components from different libraries it is possible to create a simulation model, which includes mechanical, thermal and hydraulic models of the gearbox. Results for mechanical, thermal, and hydraulic simulations are presented in the thesis. Due to the large scale of the wind turbine gearbox and the amount of power transmitted, power loss calculations from AMESim software are inaccurate and power losses are modelled as constant efficiency for each gear mesh. Starting values for simulation in thermal and hydraulic simulations were chosen from test measurements and from empirical study as compact and complex design of gearbox prevents accurate test measurements. In further studies to increase the accuracy of the simulation model, components used for power loss calculations needs to be modified and values for unknown variables are needed to be solved through accurate test measurements.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The present research study was designed to test a contingency model of job satisfaction based on participation in decision making as the antecedent variable and job involvement as the intervening variable. The instruments used to measure the variables were the participation in decision making scale developed by Siegel and Ruh (1973), the job involvement scale by Lodahl and Kejner (1965) and the job satisfaction construct derived from Hoppock (1935). The findings indicate that statistically significant correlations do exist for the 1995 educators surveyed in this study. Educators who reported high levels of participation in decision making consistently reported high levels of job involvement (p!: 0.001). Also, teachers reporting high levels of job involvement consistently scored high on their levels of job satis faction (p!: 0.001). All major hypotheses were sUPFOrted by the data. Through exploratory hypotheses, the study attempted to develop statements of relationships between criteria of job satisfaction and sex and marital status of employees in the system. The hypotheses received only minimal support, but the results did highlight the impracticability of attempting to develop any such relationships without using definite personality and situational variables as moderators. Differences between male and female socialization, sex discrimination and multiplicity of roles are briefly discussed as possible explanations for the reported findings.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The purpose of this study was to examine a model of personality and health. Specifically, this thesis examined perfectionism as a predictor of health status and health behaviours, as moderated by coping styles. A community sample of 813 young adults completed the Multidimensional Perfectionism Scale, the Coping Strategy Indicator, and measures of health symptoms, health care utilization, and various health behaviours. Multiple regression analyses revealed a number of significant findings. First, perfectionism and coping styles contributed significant main effects in predicting health status and health behaviours, although coping styles were not shown to moderate the perfectionism-health relationship. The data showed that perfectionism did constitute a health risk, both in terms of health status and health behaviours. Finally, an unexpected finding was that perfectionism also included adaptive features related to health. Specifically, some dimensions of perfectionism were also associated with reports of better health status and involvement in some positive health behaviours.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

We study the dynamics of a game-theoretic network formation model that yields large-scale small-world networks. So far, mostly stochastic frameworks have been utilized to explain the emergence of these networks. On the other hand, it is natural to seek for game-theoretic network formation models in which links are formed due to strategic behaviors of individuals, rather than based on probabilities. Inspired by Even-Dar and Kearns (2007), we consider a more realistic model in which the cost of establishing each link is dynamically determined during the course of the game. Moreover, players are allowed to put transfer payments on the formation of links. Also, they must pay a maintenance cost to sustain their direct links during the game. We show that there is a small diameter of at most 4 in the general set of equilibrium networks in our model. Unlike earlier model, not only the existence of equilibrium networks is guaranteed in our model, but also these networks coincide with the outcomes of pairwise Nash equilibrium in network formation. Furthermore, we provide a network formation simulation that generates small-world networks. We also analyze the impact of locating players in a hierarchical structure by constructing a strategic model, where a complete b-ary tree is the seed network.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The purpose of the present experiment was to determine whether learning is optimized when providing the opportunity to observe either segments, or the whole basketball jump shot. Participants performed 50 jump-shots from the free throw line during acquisition, and returned one day later for a 10 shot retention test and a memory recall test of the jump-shot technique. Shot accuracy was assessed on a 5-point scale and technique assessed on a 7-point scale. The number of components recalled correctly by participants assessed mental representation. Retention results showed superior shot technique and recall success for those participants provided control over the frequency and type of modelled information compared to participants not provided control. Furthermore, participants in the self-condition utilized the part-model information more frequently than whole-model information highlighting the effectiveness of providing the learner control over viewing multiple segments of a skill compared to only watching the whole model.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This thesis "Entitled performance of district industries centres in kerala :An application of augmented solow model.The first chapter deals with evolution of approaches for promoting small scale production and the growth of small scale industries in india.the developing countries face the problems like sluggish growth capital shortages high levels of unemployment,enoromous rural-urban economic disparities regional inequalities increasing concentration of capital and chronic difficulities in the export sector.Review of literature and methodology of the study are presented in the second chapter. In the third chapter an attempt has been made to make an in-depth study of the emergence and growth of district of district industries centres.In the chapter four an attempt was made to study the organisational structure of DICs functions and responsibilities assigned to the functional managers and performance of the functionaries.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Regional climate models are becoming increasingly popular to provide high resolution climate change information for impacts assessments to inform adaptation options. Many countries and provinces requiring these assessments are as small as 200,000 km2 in size, significantly smaller than an ideal domain needed for successful applications of one-way nested regional climate models. Therefore assessments on sub-regional scales (e.g., river basins) are generally carried out using climate change simulations performed for relatively larger regions. Here we show that the seasonal mean hydrological cycle and the day-to-day precipitation variations of a sub-region within the model domain are sensitive to the domain size, even though the large scale circulation features over the region are largely insensitive. On seasonal timescales, the relatively smaller domains intensify the hydrological cycle by increasing the net transport of moisture into the study region and thereby enhancing the precipitation and local recycling of moisture. On daily timescales, the simulations run over smaller domains produce higher number of moderate precipitation days in the sub-region relative to the corresponding larger domain simulations. An assessment of daily variations of water vapor and the vertical velocity within the sub-region indicates that the smaller domains may favor more frequent moderate uplifting and subsequent precipitation in the region. The results remained largely insensitive to the horizontal resolution of the model, indicating the robustness of the domain size influence on the regional model solutions. These domain size dependent precipitation characteristics have the potential to add one more level of uncertainty to the downscaled projections.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The progress in microsystem technology or nano technology places extended requirements to the fabrication processes. The trend is moving towards structuring within the nanometer scale on the one hand, and towards fabrication of structures with high aspect ratio (ratio of vertical vs. lateral dimensions) and large depths in the 100 µm scale on the other hand. Current procedures for the microstructuring of silicon are wet chemical etching and dry or plasma etching. A modern plasma etching technique for the structuring of silicon is the so-called "gas chopping" etching technique (also called "time-multiplexed etching"). In this etching technique, passivation cycles, which prevent lateral underetching of sidewalls, and etching cycles, which etch preferably in the vertical direction because of the sidewall passivation, are constantly alternated during the complete etching process. To do this, a CHF3/CH4 plasma, which generates CF monomeres is employed during the passivation cycle, and a SF6/Ar, which generates fluorine radicals and ions plasma is employed during the etching cycle. Depending on the requirements on the etched profile, the durations of the individual passivation and etching cycles are in the range of a few seconds up to several minutes. The profiles achieved with this etching process crucially depend on the flow of reactants, i.e. CF monomeres during the passivation cycle, and ions and fluorine radicals during the etching cycle, to the bottom of the profile, especially for profiles with high aspect ratio. With regard to the predictability of the etching processes, knowledge of the fundamental effects taking place during a gas chopping etching process, and their impact onto the resulting profile is required. For this purpose in the context of this work, a model for the description of the profile evolution of such etching processes is proposed, which considers the reactions (etching or deposition) at the sample surface on a phenomenological basis. Furthermore, the reactant transport inside the etching trench is modelled, based on angular distribution functions and on absorption probabilities at the sidewalls and bottom of the trench. A comparison of the simulated profiles with corresponding experimental profiles reveals that the proposed model reproduces the experimental profiles, if the angular distribution functions and absorption probabilities employed in the model is in agreement with data found in the literature. Therefor the model developed in the context of this work is an adequate description of the effects taking place during a gas chopping plasma etching process.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A foundational model of concurrency is developed in this thesis. We examine issues in the design of parallel systems and show why the actor model is suitable for exploiting large-scale parallelism. Concurrency in actors is constrained only by the availability of hardware resources and by the logical dependence inherent in the computation. Unlike dataflow and functional programming, however, actors are dynamically reconfigurable and can model shared resources with changing local state. Concurrency is spawned in actors using asynchronous message-passing, pipelining, and the dynamic creation of actors. This thesis deals with some central issues in distributed computing. Specifically, problems of divergence and deadlock are addressed. For example, actors permit dynamic deadlock detection and removal. The problem of divergence is contained because independent transactions can execute concurrently and potentially infinite processes are nevertheless available for interaction.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This thesis describes the development of a model-based vision system that exploits hierarchies of both object structure and object scale. The focus of the research is to use these hierarchies to achieve robust recognition based on effective organization and indexing schemes for model libraries. The goal of the system is to recognize parameterized instances of non-rigid model objects contained in a large knowledge base despite the presence of noise and occlusion. Robustness is achieved by developing a system that can recognize viewed objects that are scaled or mirror-image instances of the known models or that contain components sub-parts with different relative scaling, rotation, or translation than in models. The approach taken in this thesis is to develop an object shape representation that incorporates a component sub-part hierarchy- to allow for efficient and correct indexing into an automatically generated model library as well as for relative parameterization among sub-parts, and a scale hierarchy- to allow for a general to specific recognition procedure. After analysis of the issues and inherent tradeoffs in the recognition process, a system is implemented using a representation based on significant contour curvature changes and a recognition engine based on geometric constraints of feature properties. Examples of the system's performance are given, followed by an analysis of the results. In conclusion, the system's benefits and limitations are presented.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

We contribute a quantitative and systematic model to capture etch non-uniformity in deep reactive ion etch of microelectromechanical systems (MEMS) devices. Deep reactive ion etch is commonly used in MEMS fabrication where high-aspect ratio features are to be produced in silicon. It is typical for many supposedly identical devices, perhaps of diameter 10 mm, to be etched simultaneously into one silicon wafer of diameter 150 mm. Etch non-uniformity depends on uneven distributions of ion and neutral species at the wafer level, and on local consumption of those species at the device, or die, level. An ion–neutral synergism model is constructed from data obtained from etching several layouts of differing pattern opening densities. Such a model is used to predict wafer-level variation with an r.m.s. error below 3%. This model is combined with a die-level model, which we have reported previously, on a MEMS layout. The two-level model is shown to enable prediction of both within-die and wafer-scale etch rate variation for arbitrary wafer loadings.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Sediment composition is mainly controlled by the nature of the source rock(s), and chemical (weathering) and physical processes (mechanical crushing, abrasion, hydrodynamic sorting) during alteration and transport. Although the factors controlling these processes are conceptually well understood, detailed quantification of compositional changes induced by a single process are rare, as are examples where the effects of several processes can be distinguished. The present study was designed to characterize the role of mechanical crushing and sorting in the absence of chemical weathering. Twenty sediment samples were taken from Alpine glaciers that erode almost pure granitoid lithologies. For each sample, 11 grain-size fractions from granules to clay (ø grades <-1 to >9) were separated, and each fraction was analysed for its chemical composition. The presence of clear steps in the box-plots of all parts (in adequate ilr and clr scales) against ø is assumed to be explained by typical crystal size ranges for the relevant mineral phases. These scatter plots and the biplot suggest a splitting of the full grain size range into three groups: coarser than ø=4 (comparatively rich in SiO2, Na2O, K2O, Al2O3, and dominated by “felsic” minerals like quartz and feldspar), finer than ø=8 (comparatively rich in TiO2, MnO, MgO, Fe2O3, mostly related to “mafic” sheet silicates like biotite and chlorite), and intermediate grains sizes (4≤ø <8; comparatively rich in P2O5 and CaO, related to apatite, some feldspar). To further test the absence of chemical weathering, the observed compositions were regressed against three explanatory variables: a trend on grain size in ø scale, a step function for ø≥4, and another for ø≥8. The original hypothesis was that the trend could be identified with weathering effects, whereas each step function would highlight those minerals with biggest characteristic size at its lower end. Results suggest that this assumption is reasonable for the step function, but that besides weathering some other factors (different mechanical behavior of minerals) have also an important contribution to the trend. Key words: sediment, geochemistry, grain size, regression, step function

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objective: To establish a prediction model of the degree of disability in adults with Spinal CordInjury (SCI ) based on the use of the WHO-DAS II . Methods: The disability degree was correlatedwith three variable groups: clinical, sociodemographic and those related with rehabilitation services.A model of multiple linear regression was built to predict disability. 45 people with sci exhibitingdiverse etiology, neurological level and completeness participated. Patients were older than 18 andthey had more than a six-month post-injury. The WHO-DAS II and the ASIA impairment scale(AIS ) were used. Results: Variables that evidenced a significant relationship with disability were thefollowing: occupational situation, type of affiliation to the public health care system, injury evolutiontime, neurological level, partial preservation zone, ais motor and sensory scores and number ofclinical complications during the last year. Complications significantly associated to disability werejoint pain, urinary infections, intestinal problems and autonomic disreflexia. None of the variablesrelated to rehabilitation services showed significant association with disability. The disability degreeexhibited significant differences in favor of the groups that received the following services: assistivedevices supply and vocational, job or educational counseling. Conclusions: The best predictiondisability model in adults with sci with more than six months post-injury was built with variablesof injury evolution time, AIS sensory score and injury-related unemployment.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The first part of this work presents an accurate analysis of the most relevant 3D registration techniques, including initial pose estimation, pairwise registration and multiview registration strategies. A new classification has been proposed, based on both the applications and the approach of the methods that have been discussed. The main contribution of this thesis is the proposal of a new 3D multiview registration strategy. The proposed approach detects revisited regions obtaining cycles of views that are used to reduce the inaccuracies that may exist in the final model due to error propagation. The method takes advantage of both global and local information of the registration process, using graph theory techniques in order correlate multiple views and minimize the propagated error by registering the views in an optimal way. The proposed method has been tested using both synthetic and real data, in order to show and study its behavior and demonstrate its reliability.